From: Chen-Yu Tsai <firstname.lastname@example.org> To: "Ondřej Jirman" <email@example.com> Cc: Alessandro Zummo <firstname.lastname@example.org>, Alexandre Belloni <email@example.com>, Rob Herring <firstname.lastname@example.org>, Mark Rutland <email@example.com>, Maxime Ripard <firstname.lastname@example.org>, email@example.com, devicetree <firstname.lastname@example.org>, linux-arm-kernel <email@example.com>, linux-kernel <firstname.lastname@example.org>, linux-sunxi <email@example.com> Subject: Re: [linux-sunxi] [PATCH 0/3] Add basic support for RTC on Allwinner H6 SoC Date: Mon, 15 Apr 2019 16:18:12 +0800 Message-ID: <CAGb2v66cbpsoHJoiFJkBwhZ5SbO+uO+Kf6gtnA3kPFQZq0329Q@mail.gmail.com> (raw) In-Reply-To: <firstname.lastname@example.org> On Fri, Apr 12, 2019 at 8:07 PM megous via linux-sunxi <email@example.com> wrote: > > From: Ondrej Jirman <firstname.lastname@example.org> > > I went through the datasheets for H6 and H5, and compared the differences. > RTCs are largely similar, but not entirely compatible. Incompatibilities > are in details not yet implemented by the rtc driver though. > > I also corrected the clock tree in H6 DTSI. Please also add DCXO clock input/output and XO clock input to the bindings and DT, and also fix up the clock tree. You can skip them in the driver for now, but please add a TODO. As long as you don't change the clock-output-name of osc24M, everything should work as before. We just want the DT to describe what is actually there. For the XO input, you could just directly reference the external crystal node. The gate for it is likely somewhere in the PRCM block, which we don't have docs for. > There's a small detail here, that's not described absolutely correctly in > DTSI, but the difference is not really that material. ext_osc32k is > originally modelled as a fixed clock that feeds into RTC module, but in > reality it's the RTC module that implements via its registers enabling and > disabling of this oscillator/clock. > > Though: > - there's no other possible user of ext_osc32k than RTC module > - there's no other possible external configuration for the crystal > circuit that would need to be handled in the dts per board > > So I guess, while the description is not perfect, this patch series still > improves the current situation. Or maybe I'm misunderstanding something, > and &ext_osc32k node just describes a fact that there's a crystal on > the board. Then, everything is perhaps fine. :) Correct. The external clock nodes are modeling the crystal, not the internal clock gate / distributor. Were the vendor to not include the crystal (for whatever reasons), the DT should be able to describe it via the absence of the clock input, and the driver should correctly use the internal (inaccurate) oscillator. I realize the clocks property is required, and the driver doesn't handle this case either, so we might have to fix that if it were to appear in the wild. > For now, the enable bit for this oscillator is toggled by the re-parenting > code automatically, as needed. That's fine. No need to increase the clock tree depth. ChenYu > This patchset is necessary for implementing the WiFi/Bluetooth support > on boards using H6 SoC. > > Please take a look. > > Thank you and regards, > Ondrej Jirman > > Ondrej Jirman (3): > dt-bindings: Add compatible for H6 RTC > rtc: sun6i: Add support for H6 RTC > arm64: dts: sun50i-h6: Add support for RTC and fix the clock tree > > .../devicetree/bindings/rtc/sun6i-rtc.txt | 1 + > arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 30 +++++++------- > drivers/rtc/rtc-sun6i.c | 40 ++++++++++++++++++- > 3 files changed, 55 insertions(+), 16 deletions(-) > > -- > 2.21.0 > > -- > You received this message because you are subscribed to the Google Groups "linux-sunxi" group. > To unsubscribe from this group and stop receiving emails from it, send an email to email@example.com. > For more options, visit https://groups.google.com/d/optout.
next prev parent reply index Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-04-12 12:07 megous 2019-04-12 12:07 ` [PATCH 1/3] dt-bindings: Add compatible for H6 RTC megous 2019-08-05 10:16 ` [linux-sunxi] " Chen-Yu Tsai 2019-04-12 12:07 ` [PATCH 2/3] rtc: sun6i: Add support " megous 2019-08-05 10:16 ` [linux-sunxi] " Chen-Yu Tsai 2019-08-05 10:20 ` Ondřej Jirman 2019-08-05 10:45 ` Ondřej Jirman 2019-08-05 10:54 ` Chen-Yu Tsai 2019-08-05 11:10 ` Ondřej Jirman 2019-08-05 11:21 ` Chen-Yu Tsai 2019-08-05 12:16 ` Clément Péron 2019-04-12 12:07 ` [PATCH 3/3] arm64: dts: sun50i-h6: Add support for RTC and fix the clock tree megous 2019-04-15 8:18 ` Chen-Yu Tsai [this message] 2019-04-15 14:22 ` [linux-sunxi] [PATCH 0/3] Add basic support for RTC on Allwinner H6 SoC Ondřej Jirman 2019-04-15 14:33 ` Maxime Ripard 2019-04-15 14:39 ` Chen-Yu Tsai 2019-04-15 14:35 ` Chen-Yu Tsai 2019-04-15 15:17 ` Ondřej Jirman 2019-08-06 18:30 ` Ondřej Jirman 2019-08-06 22:27 ` Ondřej Jirman 2019-08-07 10:55 ` Alexandre Belloni 2019-08-08 5:48 ` Chen-Yu Tsai 2019-08-08 12:12 ` Ondřej Jirman 2019-08-08 23:39 ` Alexandre Belloni 2019-08-09 9:16 ` Ondřej Jirman
Reply instructions: You may reply publically to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=CAGb2v66cbpsoHJoiFJkBwhZ5SbO+uO+Kf6gtnA3kPFQZq0329Q@mail.gmail.com \ --firstname.lastname@example.org \ --email@example.com \ --firstname.lastname@example.org \ --email@example.com \ --firstname.lastname@example.org \ --email@example.com \ --firstname.lastname@example.org \ --email@example.com \ --firstname.lastname@example.org \ --email@example.com \ --firstname.lastname@example.org \ --email@example.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
Linux-RTC Archive on lore.kernel.org Archives are clonable: git clone --mirror https://lore.kernel.org/linux-rtc/0 linux-rtc/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 linux-rtc linux-rtc/ https://lore.kernel.org/linux-rtc \ firstname.lastname@example.org email@example.com public-inbox-index linux-rtc Newsgroup available over NNTP: nntp://nntp.lore.kernel.org/org.kernel.vger.linux-rtc AGPL code for this site: git clone https://public-inbox.org/ public-inbox