Linux-RTC Archive on lore.kernel.org
 help / color / Atom feed
From: Pi-Hsun Shih <pihsun@chromium.org>
To: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
Cc: Lee Jones <lee.jones@linaro.org>,
	Rob Herring <robh+dt@kernel.org>, Mark Brown <broonie@kernel.org>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	Alexandre Belloni <alexandre.belloni@bootlin.com>,
	Mark Rutland <mark.rutland@arm.com>,
	Liam Girdwood <lgirdwood@gmail.com>,
	Eddie Huang <eddie.huang@mediatek.com>,
	Sean Wang <sean.wang@mediatek.com>,
	Alessandro Zummo <a.zummo@towertech.it>,
	Kate Stewart <kstewart@linuxfoundation.org>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Thomas Gleixner <tglx@linutronix.de>,
	Richard Fontana <rfontana@redhat.com>,
	"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" 
	<devicetree@vger.kernel.org>,
	"moderated list:ARM/Mediatek SoC support" 
	<linux-arm-kernel@lists.infradead.org>,
	"moderated list:ARM/Mediatek SoC support" 
	<linux-mediatek@lists.infradead.org>,
	open list <linux-kernel@vger.kernel.org>,
	"open list:REAL TIME CLOCK (RTC) SUBSYSTEM" 
	<linux-rtc@vger.kernel.org>,
	srv_heupstream@mediatek.com
Subject: Re: [PATCH v5 06/10] mfd: Add support for the MediaTek MT6358 PMIC
Date: Mon, 2 Dec 2019 16:06:59 +0800
Message-ID: <CANdKZ0eUDhhQPBBiOWZ0u03SFoFQM6b=ED9AGe+JtBSr_zeJKQ@mail.gmail.com> (raw)
In-Reply-To: <1566531931-9772-7-git-send-email-hsin-hsiung.wang@mediatek.com>

Hi,

On Fri, Aug 23, 2019 at 11:46 AM Hsin-Hsiung Wang
<hsin-hsiung.wang@mediatek.com> wrote:
>
> This adds support for the MediaTek MT6358 PMIC. This is a
> multifunction device with the following sub modules:
>
> - Regulator
> - RTC
> - Codec
> - Interrupt
>
> It is interfaced to the host controller using SPI interface
> by a proprietary hardware called PMIC wrapper or pwrap.
> MT6358 MFD is a child device of the pwrap.
>
> Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
> ---
>  drivers/mfd/Makefile                 |   3 +-
>  drivers/mfd/mt6358-irq.c             | 231 ++++++++++++++++++++++++++++
>  drivers/mfd/mt6397-core.c            |  52 ++++++-
>  include/linux/mfd/mt6358/core.h      | 158 ++++++++++++++++++++
>  include/linux/mfd/mt6358/registers.h | 282 +++++++++++++++++++++++++++++++++++
>  include/linux/mfd/mt6397/core.h      |   3 +
>  6 files changed, 727 insertions(+), 2 deletions(-)
>  create mode 100644 drivers/mfd/mt6358-irq.c
>  create mode 100644 include/linux/mfd/mt6358/core.h
>  create mode 100644 include/linux/mfd/mt6358/registers.h
> (...)
> diff --git a/drivers/mfd/mt6358-irq.c b/drivers/mfd/mt6358-irq.c
> new file mode 100644
> index 0000000..760b72f
> --- /dev/null
> +++ b/drivers/mfd/mt6358-irq.c
> @@ -0,0 +1,231 @@
> +// SPDX-License-Identifier: GPL-2.0
> +//
> +// Copyright (c) 2019 MediaTek Inc.
> +
> +#include <linux/interrupt.h>
> +#include <linux/mfd/mt6358/core.h>
> +#include <linux/mfd/mt6358/registers.h>
> +#include <linux/mfd/mt6397/core.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/of_irq.h>
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
> +
> +static struct irq_top_t mt6358_ints[] = {
> +       MT6358_TOP_GEN(BUCK),
> +       MT6358_TOP_GEN(LDO),
> +       MT6358_TOP_GEN(PSC),
> +       MT6358_TOP_GEN(SCK),
> +       MT6358_TOP_GEN(BM),
> +       MT6358_TOP_GEN(HK),
> +       MT6358_TOP_GEN(AUD),
> +       MT6358_TOP_GEN(MISC),
> +};
> +
> +static void pmic_irq_enable(struct irq_data *data)
> +{
> +       unsigned int hwirq = irqd_to_hwirq(data);
> +       struct mt6397_chip *chip = irq_data_get_irq_chip_data(data);
> +       struct pmic_irq_data *irqd = chip->irq_data;
> +
> +       irqd->enable_hwirq[hwirq] = true;
> +}
> +
> +static void pmic_irq_disable(struct irq_data *data)
> +{
> +       unsigned int hwirq = irqd_to_hwirq(data);
> +       struct mt6397_chip *chip = irq_data_get_irq_chip_data(data);
> +       struct pmic_irq_data *irqd = chip->irq_data;
> +
> +       irqd->enable_hwirq[hwirq] = false;
> +}
> +
> +static void pmic_irq_lock(struct irq_data *data)
> +{
> +       struct mt6397_chip *chip = irq_data_get_irq_chip_data(data);
> +
> +       mutex_lock(&chip->irqlock);
> +}
> +
> +static void pmic_irq_sync_unlock(struct irq_data *data)
> +{
> +       unsigned int i, top_gp, en_reg, int_regs, shift;
> +       struct mt6397_chip *chip = irq_data_get_irq_chip_data(data);
> +       struct pmic_irq_data *irqd = chip->irq_data;
> +
> +       for (i = 0; i < irqd->num_pmic_irqs; i++) {
> +               if (irqd->enable_hwirq[i] == irqd->cache_hwirq[i])
> +                       continue;
> +
> +               /* Find out the irq group */
> +               top_gp = 0;
> +               while ((top_gp + 1) < ARRAY_SIZE(mt6358_ints) &&
> +                      i >= mt6358_ints[top_gp + 1].hwirq_base)
> +                       top_gp++;
> +
> +               if (top_gp >= ARRAY_SIZE(mt6358_ints)) {

Would this condition ever be true? The while loop before this always
break when top_gp == ARRAY_SIZE(mt6358_ints) - 1.

> +                       mutex_unlock(&chip->irqlock);
> +                       dev_err(chip->dev,
> +                               "Failed to get top_group: %d\n", top_gp);
> +                       return;
> +               }
> +
> +               /* Find the irq registers */
> +               int_regs = (i - mt6358_ints[top_gp].hwirq_base) /
> +                           MT6358_REG_WIDTH;
> +               en_reg = mt6358_ints[top_gp].en_reg +
> +                       mt6358_ints[top_gp].en_reg_shift * int_regs;
> +               shift = (i - mt6358_ints[top_gp].hwirq_base) % MT6358_REG_WIDTH;
> +               regmap_update_bits(chip->regmap, en_reg, BIT(shift),
> +                                  irqd->enable_hwirq[i] << shift);
> +               irqd->cache_hwirq[i] = irqd->enable_hwirq[i];
> +       }
> +       mutex_unlock(&chip->irqlock);
> +}
> +
> +static struct irq_chip mt6358_irq_chip = {
> +       .name = "mt6358-irq",
> +       .flags = IRQCHIP_SKIP_SET_WAKE,
> +       .irq_enable = pmic_irq_enable,
> +       .irq_disable = pmic_irq_disable,
> +       .irq_bus_lock = pmic_irq_lock,
> +       .irq_bus_sync_unlock = pmic_irq_sync_unlock,
> +};
> +
> +static void mt6358_irq_sp_handler(struct mt6397_chip *chip,
> +                                 unsigned int top_gp)
> +{
> +       unsigned int sta_reg, irq_status;
> +       unsigned int hwirq, virq;
> +       int ret, i, j;
> +
> +       for (i = 0; i < mt6358_ints[top_gp].num_int_regs; i++) {
> +               sta_reg = mt6358_ints[top_gp].sta_reg +
> +                       mt6358_ints[top_gp].sta_reg_shift * i;
> +               ret = regmap_read(chip->regmap, sta_reg, &irq_status);
> +               if (ret) {
> +                       dev_err(chip->dev,
> +                               "Failed to read irq status: %d\n", ret);
> +                       return;
> +               }
> +
> +               if (!irq_status)
> +                       continue;
> +
> +               for (j = 0; j < MT6358_REG_WIDTH ; j++) {
> +                       if ((irq_status & BIT(j)) == 0)
> +                               continue;
> +                       hwirq = mt6358_ints[top_gp].hwirq_base +
> +                               MT6358_REG_WIDTH * i + j;
> +                       virq = irq_find_mapping(chip->irq_domain, hwirq);
> +                       if (virq)
> +                               handle_nested_irq(virq);
> +               }
> +
> +               regmap_write(chip->regmap, sta_reg, irq_status);
> +       }
> +}
> +
> +static irqreturn_t mt6358_irq_handler(int irq, void *data)
> +{
> +       struct mt6397_chip *chip = data;
> +       struct pmic_irq_data *mt6358_irq_data = chip->irq_data;
> +       unsigned int top_irq_status;
> +       unsigned int i;
> +       int ret;
> +
> +       ret = regmap_read(chip->regmap,
> +                         mt6358_irq_data->top_int_status_reg,
> +                         &top_irq_status);
> +       if (ret) {
> +               dev_err(chip->dev, "Can't read TOP_INT_STATUS ret=%d\n", ret);
> +               return IRQ_NONE;
> +       }
> +
> +       for (i = 0; i < mt6358_irq_data->num_top; i++) {
> +               if (top_irq_status & BIT(mt6358_ints[i].top_offset))
> +                       mt6358_irq_sp_handler(chip, i);
> +       }
> +
> +       return IRQ_HANDLED;
> +}
> +
> +static int pmic_irq_domain_map(struct irq_domain *d, unsigned int irq,
> +                              irq_hw_number_t hw)
> +{
> +       struct mt6397_chip *mt6397 = d->host_data;
> +
> +       irq_set_chip_data(irq, mt6397);
> +       irq_set_chip_and_handler(irq, &mt6358_irq_chip, handle_level_irq);
> +       irq_set_nested_thread(irq, 1);
> +       irq_set_noprobe(irq);
> +
> +       return 0;
> +}
> +
> +static const struct irq_domain_ops mt6358_irq_domain_ops = {
> +       .map = pmic_irq_domain_map,
> +       .xlate = irq_domain_xlate_twocell,
> +};
> +
> +int mt6358_irq_init(struct mt6397_chip *chip)
> +{
> +       int i, j, ret;
> +       struct pmic_irq_data *irqd;
> +
> +       irqd = devm_kzalloc(chip->dev, sizeof(struct pmic_irq_data *),
> +                           GFP_KERNEL);
> +       if (!irqd)
> +               return -ENOMEM;
> +
> +       chip->irq_data = irqd;
> +
> +       mutex_init(&chip->irqlock);
> +       irqd->top_int_status_reg = MT6358_TOP_INT_STATUS0;
> +       irqd->num_pmic_irqs = MT6358_IRQ_NR;
> +       irqd->num_top = ARRAY_SIZE(mt6358_ints);

ARRAY_SIZE(mt6358_ints) is still used in pmic_irq_sync_unlock. Is this
variable needed, or should the ARRAY_SIZE(mt6358_ints) in
pmic_irq_sync_unlock be changed to irqd->num_top too?

> +
> +       irqd->enable_hwirq = devm_kcalloc(chip->dev,
> +                                         irqd->num_pmic_irqs,
> +                                         sizeof(bool),
> +                                         GFP_KERNEL);
> +       if (!irqd->enable_hwirq)
> +               return -ENOMEM;
> +
> +       irqd->cache_hwirq = devm_kcalloc(chip->dev,
> +                                        irqd->num_pmic_irqs,
> +                                        sizeof(bool),
> +                                        GFP_KERNEL);
> +       if (!irqd->cache_hwirq)
> +               return -ENOMEM;
> +
> +       /* Disable all interrupts for initializing */
> +       for (i = 0; i < irqd->num_top; i++) {
> +               for (j = 0; j < mt6358_ints[i].num_int_regs; j++)
> +                       regmap_write(chip->regmap,
> +                                    mt6358_ints[i].en_reg +
> +                                    mt6358_ints[i].en_reg_shift * j, 0);
> +       }
> +
> +       chip->irq_domain = irq_domain_add_linear(chip->dev->of_node,
> +                                                irqd->num_pmic_irqs,
> +                                                &mt6358_irq_domain_ops, chip);
> +       if (!chip->irq_domain) {
> +               dev_err(chip->dev, "could not create IRQ domain\n");
> +               return -ENODEV;
> +       }
> +
> +       ret = devm_request_threaded_irq(chip->dev, chip->irq, NULL,
> +                                       mt6358_irq_handler, IRQF_ONESHOT,
> +                                       mt6358_irq_chip.name, chip);
> +       if (ret) {
> +               dev_err(chip->dev, "failed to register irq=%d; err: %d\n",
> +                       chip->irq, ret);
> +               return ret;
> +       }
> +
> +       enable_irq_wake(chip->irq);
> +       return ret;
> +}
> (...)

  reply index

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-23  3:45 [PATCH v5 00/10] Add Support for MediaTek PMIC MT6358 Hsin-Hsiung Wang
2019-08-23  3:45 ` [PATCH v5 01/10] mfd: mt6397: clean up code Hsin-Hsiung Wang
2019-08-23  3:45 ` [PATCH v5 02/10] mfd: mt6397: extract irq related code from core driver Hsin-Hsiung Wang
2019-08-23 12:13   ` [BUG] " Frank Wunderlich
2019-08-23 14:56     ` Matthias Brugger
2019-08-23 15:26       ` Frank Wunderlich
2019-08-23 15:42         ` Matthias Brugger
2019-08-23 17:16           ` Aw: " Frank Wunderlich
2019-08-29  6:24             ` Hsin-hsiung Wang
2019-09-19 18:59               ` Frank Wunderlich
2019-09-30 19:44               ` Aw: " Frank Wunderlich
2019-08-23 15:35       ` Frank Wunderlich
2019-08-23 15:53       ` Frank Wunderlich
2019-08-23 14:53   ` Matthias Brugger
2019-08-23  3:45 ` [PATCH v5 03/10] mfd: mt6397: modify suspend/resume behavior Hsin-Hsiung Wang
2019-08-23 15:12   ` Matthias Brugger
2019-08-23  3:45 ` [PATCH v5 04/10] dt-bindings: mfd: Add compatible for the MediaTek MT6358 PMIC Hsin-Hsiung Wang
2019-08-23  3:45 ` [PATCH v5 05/10] regulator: Add document for MT6358 regulator Hsin-Hsiung Wang
2019-08-28 10:44   ` Mark Brown
2019-08-28 13:13   ` Applied "regulator: Add document for MT6358 regulator" to the regulator tree Mark Brown
2019-08-23  3:45 ` [PATCH v5 06/10] mfd: Add support for the MediaTek MT6358 PMIC Hsin-Hsiung Wang
2019-12-02  8:06   ` Pi-Hsun Shih [this message]
2019-12-06  8:55     ` Hsin-hsiung Wang
2019-08-23  3:45 ` [PATCH v5 07/10] regulator: mt6358: Add support for MT6358 regulator Hsin-Hsiung Wang
2019-08-28 10:45   ` Mark Brown
2019-08-29  6:09     ` Hsin-hsiung Wang
2019-08-28 13:13   ` Applied "regulator: mt6358: Add support for MT6358 regulator" to the regulator tree Mark Brown
2019-08-23  3:45 ` [PATCH v5 08/10] arm64: dts: mt6358: add PMIC MT6358 related nodes Hsin-Hsiung Wang
2019-08-23  3:45 ` [PATCH v5 09/10] rtc: mt6397: fix alarm register overwrite Hsin-Hsiung Wang
2019-08-23 15:35   ` Matthias Brugger
2019-08-29  5:34     ` Hsin-hsiung Wang
2019-08-23  3:45 ` [PATCH v5 10/10] rtc: mt6397: Add support for the MediaTek MT6358 RTC Hsin-Hsiung Wang

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CANdKZ0eUDhhQPBBiOWZ0u03SFoFQM6b=ED9AGe+JtBSr_zeJKQ@mail.gmail.com' \
    --to=pihsun@chromium.org \
    --cc=a.zummo@towertech.it \
    --cc=alexandre.belloni@bootlin.com \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=eddie.huang@mediatek.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=hsin-hsiung.wang@mediatek.com \
    --cc=kstewart@linuxfoundation.org \
    --cc=lee.jones@linaro.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=linux-rtc@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=matthias.bgg@gmail.com \
    --cc=rfontana@redhat.com \
    --cc=robh+dt@kernel.org \
    --cc=sean.wang@mediatek.com \
    --cc=srv_heupstream@mediatek.com \
    --cc=tglx@linutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-RTC Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-rtc/0 linux-rtc/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-rtc linux-rtc/ https://lore.kernel.org/linux-rtc \
		linux-rtc@vger.kernel.org
	public-inbox-index linux-rtc

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-rtc


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git