linux-rtc.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
To: matti.vaittinen@fi.rohmeurope.com, mazziesaccount@gmail.com
Cc: Lee Jones <lee.jones@linaro.org>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Liam Girdwood <lgirdwood@gmail.com>,
	Mark Brown <broonie@kernel.org>,
	Michael Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@kernel.org>,
	Linus Walleij <linus.walleij@linaro.org>,
	Bartosz Golaszewski <bgolaszewski@baylibre.com>,
	Jacek Anaszewski <jacek.anaszewski@gmail.com>,
	Pavel Machek <pavel@ucw.cz>, Dan Murphy <dmurphy@ti.com>,
	Alessandro Zummo <a.zummo@towertech.it>,
	Alexandre Belloni <alexandre.belloni@bootlin.com>,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-clk@vger.kernel.org, linux-gpio@vger.kernel.org,
	linux-leds@vger.kernel.org, linux-rtc@vger.kernel.org
Subject: [RFC PATCH 11/13] led: bd71828: Support LED outputs on ROHM BD71828 PMIC
Date: Thu, 17 Oct 2019 12:53:39 +0300	[thread overview]
Message-ID: <af1fb3e010d5f34502d354369b88fa28639f587d.1571302099.git.matti.vaittinen@fi.rohmeurope.com> (raw)
In-Reply-To: <cover.1571302099.git.matti.vaittinen@fi.rohmeurope.com>

ROHM BD71828 power management IC has two LED outputs for charge status
and button pressing indications. The LED outputs can also be forced
bs SW so add driver allowing to use these LEDs for other indications
as well.

Leds are controlled by SW using 'Force ON' bits. Please note the
constrains mentioned in data-sheet:
1. If one LED is forced ON - then also the other LED is forced.
	=> You can't use SW control to force ON one LED and allow HW
	   to control the other.
2. You can't force both LEDs OFF. If the FORCE bit for both LED's is
   zero, then LEDs are controlled by HW and indicate button/charger
   states as explained in data-sheet.

Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
---
 drivers/leds/Kconfig        | 10 ++++
 drivers/leds/Makefile       |  1 +
 drivers/leds/leds-bd71828.c | 97 +++++++++++++++++++++++++++++++++++++
 3 files changed, 108 insertions(+)
 create mode 100644 drivers/leds/leds-bd71828.c

diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index b0fdeef10bd9..ec59f28bcb39 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -529,6 +529,16 @@ config LEDS_BD2802
 	  This option enables support for BD2802GU RGB LED driver chips
 	  accessed via the I2C bus.
 
+config LEDS_BD71828
+	tristate "LED driver for LED pins on ROHM BD71828 PMIC"
+	depends on LEDS_CLASS
+	depends on I2C
+	help
+	  This option enables support for LED outputs located on ROHM
+	   BD71828 power management IC. ROHM BD71828 has two led output pins
+	   which can be left to indicate HW states or controlled by SW. Say
+	   yes here if you want to enable SW control for these LEDs.
+
 config LEDS_INTEL_SS4200
 	tristate "LED driver for Intel NAS SS4200 series"
 	depends on LEDS_CLASS
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index 41fb073a39c1..2a8f6a8e4c7c 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_LEDS_AN30259A)		+= leds-an30259a.o
 obj-$(CONFIG_LEDS_BCM6328)		+= leds-bcm6328.o
 obj-$(CONFIG_LEDS_BCM6358)		+= leds-bcm6358.o
 obj-$(CONFIG_LEDS_BD2802)		+= leds-bd2802.o
+obj-$(CONFIG_LEDS_BD71828)		+= leds-bd71828.o
 obj-$(CONFIG_LEDS_CPCAP)		+= leds-cpcap.o
 obj-$(CONFIG_LEDS_LOCOMO)		+= leds-locomo.o
 obj-$(CONFIG_LEDS_LM3530)		+= leds-lm3530.o
diff --git a/drivers/leds/leds-bd71828.c b/drivers/leds/leds-bd71828.c
new file mode 100644
index 000000000000..2427619444f5
--- /dev/null
+++ b/drivers/leds/leds-bd71828.c
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (C) 2019 ROHM Semiconductors
+
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/leds.h>
+#include <linux/mfd/rohm-bd71828.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+#define BD71828_LED_TO_DATA(l) ((l)->id == ID_GREEN_LED ? \
+	container_of((l), struct bd71828_leds, green) : \
+	container_of((l), struct bd71828_leds, amber))
+
+enum {
+	ID_GREEN_LED,
+	ID_AMBER_LED,
+	ID_NMBR_OF,
+};
+
+struct bd71828_led {
+	int id;
+	struct led_classdev l;
+	u8 force_mask;
+};
+
+struct bd71828_leds {
+	struct rohm_regmap_dev *bd71828;
+	struct bd71828_led green;
+	struct bd71828_led amber;
+};
+
+static int bd71828_led_brightness_set(struct led_classdev *led_cdev,
+				      enum led_brightness value)
+{
+	struct bd71828_led *l = container_of(led_cdev, struct bd71828_led, l);
+	struct bd71828_leds *data;
+	unsigned int val = BD71828_LED_OFF;
+
+	data = BD71828_LED_TO_DATA(l);
+	if (value != LED_OFF)
+		val = BD71828_LED_ON;
+
+	return regmap_update_bits(data->bd71828->regmap, BD71828_REG_LED_CTRL,
+			    l->force_mask, val);
+}
+
+static int bd71828_led_probe(struct platform_device *pdev)
+{
+	struct rohm_regmap_dev *bd71828;
+	struct bd71828_leds *l;
+	struct bd71828_led *g, *a;
+	static const char *GNAME = "bd71828-green-led";
+	static const char *ANAME = "bd71828-amber-led";
+	int ret;
+
+	pr_info("bd71828 LED driver probed\n");
+
+	bd71828 = dev_get_drvdata(pdev->dev.parent);
+	l = devm_kzalloc(&pdev->dev, sizeof(*l), GFP_KERNEL);
+	if (!l)
+		return -ENOMEM;
+	l->bd71828 = bd71828;
+	a = &l->amber;
+	g = &l->green;
+	a->id = ID_AMBER_LED;
+	g->id = ID_GREEN_LED;
+	a->force_mask = BD71828_MASK_LED_AMBER;
+	g->force_mask = BD71828_MASK_LED_GREEN;
+
+	a->l.name = ANAME;
+	g->l.name = GNAME;
+	a->l.brightness_set_blocking = bd71828_led_brightness_set;
+	g->l.brightness_set_blocking = bd71828_led_brightness_set;
+
+	ret = devm_led_classdev_register(&pdev->dev, &g->l);
+	if (ret)
+		return ret;
+
+	return devm_led_classdev_register(&pdev->dev, &a->l);
+}
+
+static struct platform_driver bd71828_led_driver = {
+	.driver = {
+		.name  = "bd71828-led",
+	},
+	.probe  = bd71828_led_probe,
+};
+
+module_platform_driver(bd71828_led_driver);
+
+MODULE_AUTHOR("Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>");
+MODULE_DESCRIPTION("ROHM BD71828 LED driver");
+MODULE_LICENSE("GPL");
-- 
2.21.0


-- 
Matti Vaittinen, Linux device drivers
ROHM Semiconductors, Finland SWDC
Kiviharjunlenkki 1E
90220 OULU
FINLAND

~~~ "I don't think so," said Rene Descartes. Just then he vanished ~~~
Simon says - in Latin please.
~~~ "non cogito me" dixit Rene Descarte, deinde evanescavit ~~~
Thanks to Simon Glass for the translation =] 

  parent reply	other threads:[~2019-10-17  9:53 UTC|newest]

Thread overview: 43+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-10-17  9:40 [RFC PATCH 00/13] Support ROHM BD71828 PMIC Matti Vaittinen
2019-10-17  9:41 ` [RFC PATCH 01/13] mfd: bd71828: Support ROHM BD71828 PMIC - core Matti Vaittinen
2019-10-17  9:42 ` [RFC PATCH 02/13] mfd: input: bd71828: Add power-key support Matti Vaittinen
2019-10-17  9:43 ` [RFC PATCH 03/13] clk: bd718x7: Support ROHM BD71828 clk block Matti Vaittinen
2019-10-17  9:44 ` [RFC PATCH 04/13] regulator: bd718x7: Split driver to common and bd718x7 specific parts Matti Vaittinen
2019-10-17  9:44 ` [RFC PATCH 05/13] regulator: bd71828: Basic support for ROHM bd71828 PMIC regulators Matti Vaittinen
2019-10-17  9:48 ` [RFC PATCH 06/13] regulator: bd71828: Add GPIO based run-level control for regulators Matti Vaittinen
2019-10-17  9:50 ` [RFC PATCH 07/13] regulator: bd71828: enhanced run-level support Matti Vaittinen
2019-10-17  9:51 ` [RFC PATCH 08/13] regulator: bd71828: Support in-kernel APIs to change run-level Matti Vaittinen
2019-10-17  9:52 ` [RFC PATCH 09/13] mfd: rtc: support RTC on ROHM BD71828 with BD70528 driver Matti Vaittinen
2019-10-17 10:12   ` Alexandre Belloni
2019-10-17 10:36     ` Vaittinen, Matti
2019-10-17 10:48       ` Alexandre Belloni
2019-10-21  5:29         ` Vaittinen, Matti
2019-10-23 10:27         ` Vaittinen, Matti
2019-10-29 13:50           ` Alexandre Belloni
2019-10-29 14:08             ` Vaittinen, Matti
2019-10-17  9:53 ` [RFC PATCH 10/13] gpio: bd71828: Initial support for ROHM BD71828 PMIC GPIOs Matti Vaittinen
2019-10-17 12:45   ` Bartosz Golaszewski
2019-10-21  7:00     ` Vaittinen, Matti
2019-10-21 14:36       ` Bartosz Golaszewski
2019-10-21 14:56         ` Vaittinen, Matti
2019-10-22 13:19         ` Vaittinen, Matti
2019-10-17  9:53 ` Matti Vaittinen [this message]
2019-10-17 14:04   ` [RFC PATCH 11/13] led: bd71828: Support LED outputs on ROHM BD71828 PMIC Dan Murphy
2019-10-17 14:28     ` Alexandre Belloni
2019-10-21  8:00     ` Vaittinen, Matti
2019-10-21 19:09       ` Jacek Anaszewski
2019-10-22 12:40         ` Vaittinen, Matti
2019-10-22 17:40           ` Jacek Anaszewski
2019-10-23  8:37             ` Vaittinen, Matti
2019-10-23 21:59               ` Jacek Anaszewski
2019-10-24  8:15                 ` Vaittinen, Matti
2019-10-24 22:04                   ` Jacek Anaszewski
2019-10-25  7:07                     ` Vaittinen, Matti
2019-10-25 13:24                       ` Rob Herring
2019-10-25 14:37                         ` Vaittinen, Matti
2019-10-25 15:47                           ` Rob Herring
2019-10-29 13:29                             ` Vaittinen, Matti
2019-10-17  9:55 ` [RFC PATCH 12/13] dt-bindings: mfd: Document ROHM BD71282 bindings Matti Vaittinen
2019-10-17 14:18   ` Dan Murphy
2019-10-21  8:03     ` Vaittinen, Matti
2019-10-17  9:57 ` [RFC PATCH 13/13] dt-bindings: regulator: Document ROHM BD71282 regulator bindings Matti Vaittinen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=af1fb3e010d5f34502d354369b88fa28639f587d.1571302099.git.matti.vaittinen@fi.rohmeurope.com \
    --to=matti.vaittinen@fi.rohmeurope.com \
    --cc=a.zummo@towertech.it \
    --cc=alexandre.belloni@bootlin.com \
    --cc=bgolaszewski@baylibre.com \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dmurphy@ti.com \
    --cc=jacek.anaszewski@gmail.com \
    --cc=lee.jones@linaro.org \
    --cc=lgirdwood@gmail.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-leds@vger.kernel.org \
    --cc=linux-rtc@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=mazziesaccount@gmail.com \
    --cc=mturquette@baylibre.com \
    --cc=pavel@ucw.cz \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).