linux-rtc.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
To: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>,
	mazziesaccount@gmail.com
Cc: Guenter Roeck <linux@roeck-us.net>,
	heikki.haikola@fi.rohmeurope.com,
	mikko.mutanen@fi.rohmeurope.com, lee.jones@linaro.org,
	robh+dt@kernel.org, mark.rutland@arm.com, broonie@kernel.org,
	gregkh@linuxfoundation.org, rafael@kernel.org,
	mturquette@baylibre.com, sboyd@kernel.org,
	linus.walleij@linaro.org, bgolaszewski@baylibre.com,
	sre@kernel.org, lgirdwood@gmail.com, a.zummo@towertech.it,
	alexandre.belloni@bootlin.com, wim@linux-watchdog.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-clk@vger.kernel.org, linux-gpio@vger.kernel.org,
	linux-pm@vger.kernel.org, linux-rtc@vger.kernel.org,
	linux-watchdog@vger.kernel.org
Subject: [PATCH v7 10/10] watchdog: bd70528: Initial support for ROHM BD70528 watchdog block
Date: Wed, 6 Feb 2019 11:41:38 +0200	[thread overview]
Message-ID: <d6cada3dbfe70342db39950fa97093a264dad9f1.1549444366.git.matti.vaittinen@fi.rohmeurope.com> (raw)
In-Reply-To: <cover.1549444366.git.matti.vaittinen@fi.rohmeurope.com>

Initial support for watchdog block included in ROHM BD70528
power management IC.

Configurations for low power states are still to be checked.

Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
---
 drivers/watchdog/Kconfig       |  12 +++
 drivers/watchdog/Makefile      |   1 +
 drivers/watchdog/bd70528_wdt.c | 190 +++++++++++++++++++++++++++++++++++++++++
 3 files changed, 203 insertions(+)
 create mode 100644 drivers/watchdog/bd70528_wdt.c

diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 57f017d74a97..f30e3a3e886e 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -90,6 +90,18 @@ config SOFT_WATCHDOG_PRETIMEOUT
 	  watchdog. Be aware that governors might affect the watchdog because it
 	  is purely software, e.g. the panic governor will stall it!
 
+config BD70528_WATCHDOG
+	tristate "ROHM BD70528 PMIC Watchdog"
+	depends on MFD_ROHM_BD70528
+	select WATCHDOG_CORE
+	help
+	  Support for the watchdog in the ROHM BD70528 PMIC. Watchdog trigger
+	  cause system reset.
+
+	  Say Y here to include support for the ROHM BD70528 watchdog.
+	  Alternatively say M to compile the driver as a module,
+	  which will be called bd70528_wdt.
+
 config DA9052_WATCHDOG
 	tristate "Dialog DA9052 Watchdog"
 	depends on PMIC_DA9052 || COMPILE_TEST
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index a0917ef28e07..1ce87a3b1172 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -204,6 +204,7 @@ obj-$(CONFIG_WATCHDOG_SUN4V)		+= sun4v_wdt.o
 obj-$(CONFIG_XEN_WDT) += xen_wdt.o
 
 # Architecture Independent
+obj-$(CONFIG_BD70528_WATCHDOG) += bd70528_wdt.o
 obj-$(CONFIG_DA9052_WATCHDOG) += da9052_wdt.o
 obj-$(CONFIG_DA9055_WATCHDOG) += da9055_wdt.o
 obj-$(CONFIG_DA9062_WATCHDOG) += da9062_wdt.o
diff --git a/drivers/watchdog/bd70528_wdt.c b/drivers/watchdog/bd70528_wdt.c
new file mode 100644
index 000000000000..cab802ddde06
--- /dev/null
+++ b/drivers/watchdog/bd70528_wdt.c
@@ -0,0 +1,190 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (C) 2018 ROHM Semiconductors
+// ROHM BD70528MWV watchdog driver
+
+#include <linux/bcd.h>
+#include <linux/kernel.h>
+#include <linux/mfd/rohm-bd70528.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/watchdog.h>
+
+/*
+ * Max time we can set is 1 hour, 59 minutes and 59 seconds
+ * and Minimum time is 1 second
+ */
+#define WDT_MAX_MS	((2 * 60 * 60 - 1) * 1000)
+#define WDT_MIN_MS	1000
+#define DEFAULT_TIMEOUT	60
+
+struct wdtbd70528 {
+	struct device *dev;
+	struct regmap *regmap;
+	struct mutex *rtc_lock;
+	struct watchdog_device wdt;
+};
+
+static int bd70528_wdt_set_locked(struct wdtbd70528 *w, int enable)
+{
+	struct bd70528 *bd70528;
+
+	bd70528 = container_of(w->rtc_lock, struct bd70528, rtc_timer_lock);
+	return bd70528->wdt_set(bd70528, enable, NULL);
+}
+
+static int bd70528_wdt_set(struct wdtbd70528 *w, int enable)
+{
+	int ret;
+
+	mutex_lock(w->rtc_lock);
+	ret = bd70528_wdt_set_locked(w, enable);
+	mutex_unlock(w->rtc_lock);
+
+	return ret;
+}
+
+static int bd70528_wdt_start(struct watchdog_device *wdt)
+{
+	struct wdtbd70528 *w = watchdog_get_drvdata(wdt);
+
+	dev_dbg(w->dev, "WDT ping...\n");
+	return bd70528_wdt_set(w, 1);
+}
+
+static int bd70528_wdt_stop(struct watchdog_device *wdt)
+{
+	struct wdtbd70528 *w = watchdog_get_drvdata(wdt);
+
+	dev_dbg(w->dev, "WDT stopping...\n");
+	return bd70528_wdt_set(w, 0);
+}
+
+static int bd70528_wdt_set_timeout(struct watchdog_device *wdt,
+				    unsigned int timeout)
+{
+	unsigned int hours;
+	unsigned int minutes;
+	unsigned int seconds;
+	int ret;
+	struct wdtbd70528 *w = watchdog_get_drvdata(wdt);
+
+	seconds = timeout;
+	hours = timeout / (60 * 60);
+	/* Maximum timeout is 1h 59m 59s => hours is 1 or 0 */
+	if (hours)
+		seconds -= (60 * 60);
+	minutes = seconds / 60;
+	seconds = seconds % 60;
+
+	mutex_lock(w->rtc_lock);
+
+	ret = bd70528_wdt_set_locked(w, 0);
+	if (ret)
+		goto out_unlock;
+
+	ret = regmap_update_bits(w->regmap, BD70528_REG_WDT_HOUR,
+				 BD70528_MASK_WDT_HOUR, hours);
+	if (ret) {
+		dev_err(w->dev, "Failed to set WDT hours\n");
+		goto out_en_unlock;
+	}
+	ret = regmap_update_bits(w->regmap, BD70528_REG_WDT_MINUTE,
+				 BD70528_MASK_WDT_MINUTE, bin2bcd(minutes));
+	if (ret) {
+		dev_err(w->dev, "Failed to set WDT minutes\n");
+		goto out_en_unlock;
+	}
+	ret = regmap_update_bits(w->regmap, BD70528_REG_WDT_SEC,
+				 BD70528_MASK_WDT_SEC, bin2bcd(seconds));
+	if (ret)
+		dev_err(w->dev, "Failed to set WDT seconds\n");
+	else
+		dev_dbg(w->dev, "WDT tmo set to %u\n", timeout);
+
+out_en_unlock:
+	ret = bd70528_wdt_set_locked(w, 1);
+out_unlock:
+	mutex_unlock(w->rtc_lock);
+
+	return ret;
+}
+
+static const struct watchdog_info bd70528_wdt_info = {
+	.identity = "bd70528-wdt",
+	.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
+};
+
+static const struct watchdog_ops bd70528_wdt_ops = {
+	.start		= bd70528_wdt_start,
+	.stop		= bd70528_wdt_stop,
+	.set_timeout	= bd70528_wdt_set_timeout,
+};
+
+static int bd70528_wdt_probe(struct platform_device *pdev)
+{
+	struct bd70528 *bd70528;
+	struct wdtbd70528 *w;
+	int ret;
+	unsigned int reg;
+
+	bd70528 = dev_get_drvdata(pdev->dev.parent);
+	if (!bd70528) {
+		dev_err(&pdev->dev, "No MFD driver data\n");
+		return -EINVAL;
+	}
+	w = devm_kzalloc(&pdev->dev, sizeof(*w), GFP_KERNEL);
+	if (!w)
+		return -ENOMEM;
+
+	w->regmap = bd70528->chip.regmap;
+	w->rtc_lock = &bd70528->rtc_timer_lock;
+	w->dev = &pdev->dev;
+
+	w->wdt.info = &bd70528_wdt_info;
+	w->wdt.ops =  &bd70528_wdt_ops;
+	w->wdt.min_hw_heartbeat_ms = WDT_MIN_MS;
+	w->wdt.max_hw_heartbeat_ms = WDT_MAX_MS;
+	w->wdt.parent = pdev->dev.parent;
+	w->wdt.timeout = DEFAULT_TIMEOUT;
+	watchdog_set_drvdata(&w->wdt, w);
+	watchdog_init_timeout(&w->wdt, 0, pdev->dev.parent);
+
+	ret = bd70528_wdt_set_timeout(&w->wdt, w->wdt.timeout);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to set the watchdog timeout\n");
+		return ret;
+	}
+
+	mutex_lock(w->rtc_lock);
+	ret = regmap_read(w->regmap, BD70528_REG_WDT_CTRL, &reg);
+	mutex_unlock(w->rtc_lock);
+
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to get the watchdog state\n");
+		return ret;
+	}
+	if (reg & BD70528_MASK_WDT_EN) {
+		dev_dbg(&pdev->dev, "watchdog was running during probe\n");
+		set_bit(WDOG_HW_RUNNING, &w->wdt.status);
+	}
+
+	ret = devm_watchdog_register_device(&pdev->dev, &w->wdt);
+	if (ret < 0)
+		dev_err(&pdev->dev, "watchdog registration failed: %d\n", ret);
+
+	return ret;
+}
+static struct platform_driver bd70528_wdt = {
+	.driver = {
+		.name = "bd70528-wdt"
+	},
+	.probe = bd70528_wdt_probe,
+};
+
+module_platform_driver(bd70528_wdt);
+
+MODULE_AUTHOR("Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>");
+MODULE_DESCRIPTION("BD70528 watchdog driver");
+MODULE_LICENSE("GPL");
-- 
2.14.3


-- 
Matti Vaittinen, Linux device drivers
ROHM Semiconductors, Finland SWDC
Kiviharjunlenkki 1E
90220 OULU
FINLAND

~~~ "I don't think so," said Rene Descartes.  Just then, he vanished ~~~

  parent reply	other threads:[~2019-02-06  9:42 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-02-06  9:35 [PATCH v7 00/10] support ROHM BD70528 PMIC Matti Vaittinen
2019-02-06  9:36 ` [PATCH v7 01/10] mfd: bd718x7.h split to ROHM common and bd718x7 specific parts Matti Vaittinen
2019-02-06  9:38 ` [PATCH v7 02/10] regulator: bd718x7 use chip specific and generic data structs Matti Vaittinen
2019-02-06  9:38 ` [PATCH v7 03/10] clk: bd718x7: " Matti Vaittinen
2019-02-06 17:30   ` Stephen Boyd
2019-02-06  9:39 ` [PATCH v7 04/10] mfd: bd70528: Support ROHM bd70528 PMIC - core Matti Vaittinen
2019-02-06  9:39 ` [PATCH v7 05/10] clk: bd718x7: Support ROHM BD70528 clk block Matti Vaittinen
2019-02-06 17:31   ` Stephen Boyd
2019-02-07  6:01     ` Matti Vaittinen
2019-02-06  9:40 ` [PATCH v7 06/10] devicetree: bindings: Document first ROHM BD70528 bindings Matti Vaittinen
2019-02-06  9:40 ` [PATCH v7 07/10] gpio: Initial support for ROHM bd70528 GPIO block Matti Vaittinen
2019-02-06  9:40 ` [PATCH v7 08/10] rtc: bd70528: Initial support for ROHM bd70528 RTC Matti Vaittinen
2019-02-06  9:41 ` [PATCH v7 09/10] power: supply: Initial support for ROHM BD70528 PMIC charger block Matti Vaittinen
2019-02-06  9:41 ` Matti Vaittinen [this message]
2019-02-06 18:31 ` [PATCH v7 00/10] support ROHM BD70528 PMIC Kalle Valo
2019-02-07  5:57   ` Matti Vaittinen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=d6cada3dbfe70342db39950fa97093a264dad9f1.1549444366.git.matti.vaittinen@fi.rohmeurope.com \
    --to=matti.vaittinen@fi.rohmeurope.com \
    --cc=a.zummo@towertech.it \
    --cc=alexandre.belloni@bootlin.com \
    --cc=bgolaszewski@baylibre.com \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=heikki.haikola@fi.rohmeurope.com \
    --cc=lee.jones@linaro.org \
    --cc=lgirdwood@gmail.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux-rtc@vger.kernel.org \
    --cc=linux-watchdog@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=mark.rutland@arm.com \
    --cc=mazziesaccount@gmail.com \
    --cc=mikko.mutanen@fi.rohmeurope.com \
    --cc=mturquette@baylibre.com \
    --cc=rafael@kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=sre@kernel.org \
    --cc=wim@linux-watchdog.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).