[RFC PATCH v3 0/2] adding panel claa070wp03xg support for exynos

[RFC PATCH v3 0/2] adding panel claa070wp03xg support for exynos

[Randy Li]

The timings issue is still here, this version is just some modifications
in dts file.

Randy Li (2):
  ARM: dts: samsung: add rga-lvds panel in itop elite
  drm/panel: Add support for Chunghwa CLAA070WP03XG panel

 .../display/panel/chunghwa,claa070wp03xg.txt       |  7 +++
 arch/arm/boot/dts/exynos4412-itop-elite.dts        | 54 +++++++++++++++++++++-
 drivers/gpu/drm/panel/panel-simple.c               | 27 +++++++++++
 3 files changed, 86 insertions(+), 2 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/display/panel/chunghwa,claa070wp03xg.txt

-- 
2.7.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[RFC PATCH v3 1/2] ARM: dts: samsung: add rga-lvds panel in itop elite

[Randy Li]

It is actually a lvds panel connected through a rga-lvds bridge.
The touchscreen is communicated with i2c bus but the driver is not
support now.

Signed-off-by: Randy Li <ayaka-xPW3/0Ywev/iB9QmIjCX8w@public.gmane.org>
---
 arch/arm/boot/dts/exynos4412-itop-elite.dts | 54 +++++++++++++++++++++++++++--
 1 file changed, 52 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/exynos4412-itop-elite.dts b/arch/arm/boot/dts/exynos4412-itop-elite.dts
index b08705e..5153522 100644
--- a/arch/arm/boot/dts/exynos4412-itop-elite.dts
+++ b/arch/arm/boot/dts/exynos4412-itop-elite.dts
@@ -138,6 +138,36 @@
 		assigned-clocks = <&clock CLK_MOUT_CAM0>;
 		assigned-clock-parents = <&clock CLK_XUSBXTI>;
 	};
+
+	vcc_sys_lcd: sys-lcd {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>;
+	};
+
+	panel: panel@0 {
+		compatible = "chunghwa,claa070wp03xg";
+
+		power-supply = <&vcc_sys_lcd>;
+		enable-gpios = <&gpl0 2 GPIO_ACTIVE_HIGH>;
+		backlight = <&bl>;
+
+		port {
+			lcd_ep: endpoint {
+				remote-endpoint = <&rga_lvds>;
+			};
+		};
+	};
+
+	bl: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 1 5000000 PWM_POLARITY_INVERTED>;
+		brightness-levels = <0 5 12 16 32 64 128 255>;
+		default-brightness-level = <5>;
+		power-supply = <&vcc_sys_lcd>;
+	};
 };
 
 &adc {
@@ -171,11 +201,31 @@
 	assigned-clock-rates = <0>, <176000000>;
 };
 
+&fimd {
+	pinctrl-0 = <&lcd_clk &lcd_data24>;
+	pinctrl-names = "default";
+	status = "okay";
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		port@3 {
+			reg = <3>;
+			rga_lvds: endpoint {
+				remote-endpoint = <&lcd_ep>;
+			};
+		};
+	};
+};
+
 &hsotg {
 	dr_mode = "peripheral";
 	status = "okay";
 };
 
+&i2c_3 {
+	status = "okay";
+};
+
 &i2c_4 {
 	samsung,i2c-sda-delay = <100>;
 	samsung,i2c-slave-addr = <0x10>;
@@ -215,9 +265,9 @@
 
 &pwm {
 	status = "okay";
-	pinctrl-0 = <&pwm0_out>;
+	pinctrl-0 = <&pwm0_out &pwm1_out>;
 	pinctrl-names = "default";
-	samsung,pwm-outputs = <0>;
+	samsung,pwm-outputs = <0>, <1>;
 };
 
 &sdhci_2 {
-- 
2.7.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[RFC PATCH v3 2/2] drm/panel: Add support for Chunghwa CLAA070WP03XG panel

[Randy Li]

The Chunghwa CLAA070WP03XG is a 7" 1280x800 panel, which can be
supported by the simple panel driver.

Signed-off-by: Randy Li <ayaka@soulik.info>
---
 .../display/panel/chunghwa,claa070wp03xg.txt       |  7 ++++++
 drivers/gpu/drm/panel/panel-simple.c               | 27 ++++++++++++++++++++++
 2 files changed, 34 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/panel/chunghwa,claa070wp03xg.txt

diff --git a/Documentation/devicetree/bindings/display/panel/chunghwa,claa070wp03xg.txt b/Documentation/devicetree/bindings/display/panel/chunghwa,claa070wp03xg.txt
new file mode 100644
index 0000000..dd22685
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/chunghwa,claa070wp03xg.txt
@@ -0,0 +1,7 @@
+Chunghwa Picture Tubes Ltd. 7" WXGA TFT LCD panel
+
+Required properties:
+- compatible: should be "chunghwa,claa070wp03xg"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index f178998..3204e6b 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -583,6 +583,30 @@ static const struct panel_desc avic_tm070ddh03 = {
 	},
 };
 
+static const struct drm_display_mode chunghwa_claa070wp03xg_mode = {
+	.clock = 66770,
+	.hdisplay = 800,
+	.hsync_start = 800 + 49,
+	.hsync_end = 800 + 49 + 33,
+	.htotal = 800 + 49 + 33 + 17,
+	.vdisplay = 1280,
+	.vsync_start = 1280 + 1,
+	.vsync_end = 1280 + 1 + 7,
+	.vtotal = 1280 + 1 + 7 + 15,
+	.vrefresh = 60,
+	.flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC,
+};
+
+static const struct panel_desc chunghwa_claa070wp03xg = {
+	.modes = &chunghwa_claa070wp03xg_mode,
+	.num_modes = 1,
+	.bpc = 6,
+	.size = {
+		.width = 94,
+		.height = 150,
+	},
+};
+
 static const struct drm_display_mode chunghwa_claa101wa01a_mode = {
 	.clock = 72070,
 	.hdisplay = 1366,
@@ -1544,6 +1568,9 @@ static const struct of_device_id platform_of_match[] = {
 		.compatible = "avic,tm070ddh03",
 		.data = &avic_tm070ddh03,
 	}, {
+		.compatible = "chunghwa,claa070wp03xg",
+		.data = &chunghwa_claa070wp03xg,
+	}, {
 		.compatible = "chunghwa,claa101wa01a",
 		.data = &chunghwa_claa101wa01a
 	}, {
-- 
2.7.4

Re: [RFC PATCH v3 1/2] ARM: dts: samsung: add rga-lvds panel in itop elite

[Fabio Estevam]

On Mon, Sep 19, 2016 at 4:02 PM, Randy Li <ayaka@soulik.info> wrote:

> +       vcc_sys_lcd: sys-lcd {
> +               compatible = "regulator-fixed";
> +               regulator-name = "vcc_5v";
> +               regulator-min-microvolt = <5000000>;
> +               regulator-max-microvolt = <5000000>;
> +               gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>;

Is this really active high? If so, you should add the
'enable-active-high' property.
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [RFC PATCH v3 1/2] ARM: dts: samsung: add rga-lvds panel in itop elite

[ayaka]

On 09/20/2016 03:12 AM, Fabio Estevam wrote:
> On Mon, Sep 19, 2016 at 4:02 PM, Randy Li <ayaka@soulik.info> wrote:
>
>> +       vcc_sys_lcd: sys-lcd {
>> +               compatible = "regulator-fixed";
>> +               regulator-name = "vcc_5v";
>> +               regulator-min-microvolt = <5000000>;
>> +               regulator-max-microvolt = <5000000>;
>> +               gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>;
> Is this really active high? If so, you should add the
> 'enable-active-high' property.
I see, thank you. Btw, let me make it clearly, it is really an 
independentTransistor, not be controlled by PMIC.

Re: [RFC PATCH v3 2/2] drm/panel: Add support for Chunghwa CLAA070WP03XG panel

[Rob Herring]

On Tue, Sep 20, 2016 at 03:02:51AM +0800, Randy Li wrote:
> The Chunghwa CLAA070WP03XG is a 7" 1280x800 panel, which can be
> supported by the simple panel driver.
> 
> Signed-off-by: Randy Li <ayaka@soulik.info>
> ---
>  .../display/panel/chunghwa,claa070wp03xg.txt       |  7 ++++++
>  drivers/gpu/drm/panel/panel-simple.c               | 27 ++++++++++++++++++++++
>  2 files changed, 34 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/panel/chunghwa,claa070wp03xg.txt
> 
> diff --git a/Documentation/devicetree/bindings/display/panel/chunghwa,claa070wp03xg.txt b/Documentation/devicetree/bindings/display/panel/chunghwa,claa070wp03xg.txt
> new file mode 100644
> index 0000000..dd22685
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/panel/chunghwa,claa070wp03xg.txt
> @@ -0,0 +1,7 @@
> +Chunghwa Picture Tubes Ltd. 7" WXGA TFT LCD panel
> +
> +Required properties:
> +- compatible: should be "chunghwa,claa070wp03xg"

What about VCC, VLED, LED_EN (PWM), LVBIT, LVFMT, DITHER signals?

> +
> +This binding is compatible with the simple-panel binding, which is specified
> +in simple-panel.txt in this directory.

Re: [RFC PATCH v3 2/2] drm/panel: Add support for Chunghwa CLAA070WP03XG panel

[ayaka]

On 09/24/2016 02:00 AM, Rob Herring wrote:
> On Tue, Sep 20, 2016 at 03:02:51AM +0800, Randy Li wrote:
>> The Chunghwa CLAA070WP03XG is a 7" 1280x800 panel, which can be
>> supported by the simple panel driver.
>>
>> Signed-off-by: Randy Li <ayaka@soulik.info>
>> ---
>>   .../display/panel/chunghwa,claa070wp03xg.txt       |  7 ++++++
>>   drivers/gpu/drm/panel/panel-simple.c               | 27 ++++++++++++++++++++++
>>   2 files changed, 34 insertions(+)
>>   create mode 100644 Documentation/devicetree/bindings/display/panel/chunghwa,claa070wp03xg.txt
>>
>> diff --git a/Documentation/devicetree/bindings/display/panel/chunghwa,claa070wp03xg.txt b/Documentation/devicetree/bindings/display/panel/chunghwa,claa070wp03xg.txt
>> new file mode 100644
>> index 0000000..dd22685
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/display/panel/chunghwa,claa070wp03xg.txt
>> @@ -0,0 +1,7 @@
>> +Chunghwa Picture Tubes Ltd. 7" WXGA TFT LCD panel
>> +
>> +Required properties:
>> +- compatible: should be "chunghwa,claa070wp03xg"
> What about VCC, VLED, LED_EN (PWM), LVBIT, LVFMT, DITHER signals?
I didn't see the other simple-panel has that, so I didn't neither.
And I think it would only have VCC and LED_EN(PWM).
>
>> +
>> +This binding is compatible with the simple-panel binding, which is specified
>> +in simple-panel.txt in this directory.

Re: [RFC PATCH v3 2/2] drm/panel: Add support for Chunghwa CLAA070WP03XG panel

[Thierry Reding]

[-- Attachment #1: Type: text/plain, Size: 542 bytes --]

On Tue, Sep 20, 2016 at 03:02:51AM +0800, Randy Li wrote:
> The Chunghwa CLAA070WP03XG is a 7" 1280x800 panel, which can be
> supported by the simple panel driver.
> 
> Signed-off-by: Randy Li <ayaka@soulik.info>
> ---
>  .../display/panel/chunghwa,claa070wp03xg.txt       |  7 ++++++
>  drivers/gpu/drm/panel/panel-simple.c               | 27 ++++++++++++++++++++++
>  2 files changed, 34 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/panel/chunghwa,claa070wp03xg.txt

Applied, thanks.

Thierry

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 801 bytes --]

Re: [RFC PATCH v3 2/2] drm/panel: Add support for Chunghwa CLAA070WP03XG panel

[Ayaka]

從我的 iPad 傳送

> Thierry Reding <thierry.reding@gmail.com> 於 2016年12月6日 下午11:46 寫道：
> 
>> On Tue, Sep 20, 2016 at 03:02:51AM +0800, Randy Li wrote:
>> The Chunghwa CLAA070WP03XG is a 7" 1280x800 panel, which can be
>> supported by the simple panel driver.
>> 
>> Signed-off-by: Randy Li <ayaka@soulik.info>
>> ---
>> .../display/panel/chunghwa,claa070wp03xg.txt       |  7 ++++++
>> drivers/gpu/drm/panel/panel-simple.c               | 27 ++++++++++++++++++++++
>> 2 files changed, 34 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/display/panel/chunghwa,claa070wp03xg.txt
> 
> Applied, thanks.
Wait, it is RFC, not pass the test.
> 
> Thierry

Re: [RFC PATCH v3 2/2] drm/panel: Add support for Chunghwa CLAA070WP03XG panel

[Daniel Vetter]

On Wed, Dec 07, 2016 at 08:57:23AM +0800, Ayaka wrote:
> 
> 
> 從我的 iPad 傳送
> 
> > Thierry Reding <thierry.reding@gmail.com> 於 2016年12月6日 下午11:46 寫道：
> > 
> >> On Tue, Sep 20, 2016 at 03:02:51AM +0800, Randy Li wrote:
> >> The Chunghwa CLAA070WP03XG is a 7" 1280x800 panel, which can be
> >> supported by the simple panel driver.
> >> 
> >> Signed-off-by: Randy Li <ayaka@soulik.info>
> >> ---
> >> .../display/panel/chunghwa,claa070wp03xg.txt       |  7 ++++++
> >> drivers/gpu/drm/panel/panel-simple.c               | 27 ++++++++++++++++++++++
> >> 2 files changed, 34 insertions(+)
> >> create mode 100644 Documentation/devicetree/bindings/display/panel/chunghwa,claa070wp03xg.txt
> > 
> > Applied, thanks.
> Wait, it is RFC, not pass the test.

Well 2 months of silence, it's reasonable to assume that this works for
you ... I guess you need to supply a fixup patch asap ;-)
-Daniel
-- 
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch

Re: [RFC PATCH v3 2/2] drm/panel: Add support for Chunghwa CLAA070WP03XG panel

[ayaka]

On 12/07/2016 10:55 PM, Daniel Vetter wrote:
> On Wed, Dec 07, 2016 at 08:57:23AM +0800, Ayaka wrote:
>>
>> 從我的 iPad 傳送
>>
>>> Thierry Reding <thierry.reding@gmail.com> 於 2016年12月6日 下午11:46 寫道：
>>>
>>>> On Tue, Sep 20, 2016 at 03:02:51AM +0800, Randy Li wrote:
>>>> The Chunghwa CLAA070WP03XG is a 7" 1280x800 panel, which can be
>>>> supported by the simple panel driver.
>>>>
>>>> Signed-off-by: Randy Li <ayaka@soulik.info>
>>>> ---
>>>> .../display/panel/chunghwa,claa070wp03xg.txt       |  7 ++++++
>>>> drivers/gpu/drm/panel/panel-simple.c               | 27 ++++++++++++++++++++++
>>>> 2 files changed, 34 insertions(+)
>>>> create mode 100644 Documentation/devicetree/bindings/display/panel/chunghwa,claa070wp03xg.txt
>>> Applied, thanks.
>> Wait, it is RFC, not pass the test.
> Well 2 months of silence, it's reasonable to assume that this works for
> you ... I guess you need to supply a fixup patch asap ;-)
Sorry, my exynos 4412 board is broken, I will order one and fix this 
problem, please don't merge this patch until somebody confirm that it is 
adjusted to correct parameter.
> -Daniel