From: Krzysztof Kozlowski <krzk@kernel.org>
To: Kukjin Kim <kgene@kernel.org>,
Krzysztof Kozlowski <krzk@kernel.org>,
Javier Martinez Canillas <javier@osg.samsung.com>,
Wim Van Sebroeck <wim@iguana.be>,
Guenter Roeck <linux@roeck-us.net>,
linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org,
linux-watchdog@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v2 3/3] watchdog: s3c2410: Minor code cleanup
Date: Sat, 11 Mar 2017 19:42:55 +0200 [thread overview]
Message-ID: <20170311174255.23327-4-krzk@kernel.org> (raw)
In-Reply-To: <20170311174255.23327-1-krzk@kernel.org>
Cleanup the code from minor readability issues (no functional changes):
1. Fix checkpatch: ERROR: Do not include the paragraph about writing to
the Free Software Foundation's mailing address.
2. Fix checkpatch: WARNING: quoted string split across lines
3. Fix chechpatch: WARNING: Prefer 'unsigned int' to bare use of
'unsigned'
4. Use 'dev' consistently in probe function instead of mixing dev with
&pdev->dev.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
drivers/watchdog/s3c2410_wdt.c | 35 +++++++++++++----------------------
1 file changed, 13 insertions(+), 22 deletions(-)
diff --git a/drivers/watchdog/s3c2410_wdt.c b/drivers/watchdog/s3c2410_wdt.c
index d7ddee0668c3..89c7e98ae278 100644
--- a/drivers/watchdog/s3c2410_wdt.c
+++ b/drivers/watchdog/s3c2410_wdt.c
@@ -1,5 +1,4 @@
-/* linux/drivers/char/watchdog/s3c2410_wdt.c
- *
+/*
* Copyright (c) 2004 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
@@ -17,11 +16,7 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-*/
+ */
#include <linux/module.h>
#include <linux/moduleparam.h>
@@ -95,8 +90,7 @@ MODULE_PARM_DESC(tmr_atboot,
__MODULE_STRING(S3C2410_WATCHDOG_ATBOOT));
MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
-MODULE_PARM_DESC(soft_noboot, "Watchdog action, set to 1 to ignore reboots, "
- "0 to reboot (default 0)");
+MODULE_PARM_DESC(soft_noboot, "Watchdog action, set to 1 to ignore reboots, 0 to reboot (default 0)");
/**
* struct s3c2410_wdt_variant - Per-variant config data
@@ -311,7 +305,8 @@ static inline int s3c2410wdt_is_running(struct s3c2410_wdt *wdt)
return readl(wdt->reg_base + S3C2410_WTCON) & S3C2410_WTCON_ENABLE;
}
-static int s3c2410wdt_set_heartbeat(struct watchdog_device *wdd, unsigned timeout)
+static int s3c2410wdt_set_heartbeat(struct watchdog_device *wdd,
+ unsigned int timeout)
{
struct s3c2410_wdt *wdt = watchdog_get_drvdata(wdd);
unsigned long freq = clk_get_rate(wdt->clock);
@@ -525,7 +520,7 @@ s3c2410_get_wdt_drv_data(struct platform_device *pdev)
static int s3c2410wdt_probe(struct platform_device *pdev)
{
- struct device *dev;
+ struct device *dev = &pdev->dev;
struct s3c2410_wdt *wdt;
struct resource *wdt_mem;
struct resource *wdt_irq;
@@ -533,13 +528,11 @@ static int s3c2410wdt_probe(struct platform_device *pdev)
int started = 0;
int ret;
- dev = &pdev->dev;
-
wdt = devm_kzalloc(dev, sizeof(*wdt), GFP_KERNEL);
if (!wdt)
return -ENOMEM;
- wdt->dev = &pdev->dev;
+ wdt->dev = dev;
spin_lock_init(&wdt->lock);
wdt->wdt_device = s3c2410_wdd;
@@ -595,7 +588,7 @@ static int s3c2410wdt_probe(struct platform_device *pdev)
/* see if we can actually set the requested timer margin, and if
* not, try the default value */
- watchdog_init_timeout(&wdt->wdt_device, tmr_margin, &pdev->dev);
+ watchdog_init_timeout(&wdt->wdt_device, tmr_margin, dev);
ret = s3c2410wdt_set_heartbeat(&wdt->wdt_device,
wdt->wdt_device.timeout);
if (ret) {
@@ -604,11 +597,10 @@ static int s3c2410wdt_probe(struct platform_device *pdev)
if (started == 0)
dev_info(dev,
- "tmr_margin value out of range, default %d used\n",
- S3C2410_WATCHDOG_DEFAULT_TIME);
+ "tmr_margin value out of range, default %d used\n",
+ S3C2410_WATCHDOG_DEFAULT_TIME);
else
- dev_info(dev, "default timer value is out of range, "
- "cannot start\n");
+ dev_info(dev, "default timer value is out of range, cannot start\n");
}
ret = devm_request_irq(dev, wdt_irq->start, s3c2410wdt_irq, 0,
@@ -622,7 +614,7 @@ static int s3c2410wdt_probe(struct platform_device *pdev)
watchdog_set_restart_priority(&wdt->wdt_device, 128);
wdt->wdt_device.bootstatus = s3c2410wdt_get_bootstatus(wdt);
- wdt->wdt_device.parent = &pdev->dev;
+ wdt->wdt_device.parent = dev;
ret = watchdog_register_device(&wdt->wdt_device);
if (ret) {
@@ -757,7 +749,6 @@ static struct platform_driver s3c2410wdt_driver = {
module_platform_driver(s3c2410wdt_driver);
-MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>, "
- "Dimitry Andric <dimitry.andric@tomtom.com>");
+MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>, Dimitry Andric <dimitry.andric@tomtom.com>");
MODULE_DESCRIPTION("S3C2410 Watchdog Device Driver");
MODULE_LICENSE("GPL");
--
2.9.3
next prev parent reply other threads:[~2017-03-11 17:42 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-03-11 17:42 [PATCH v2 0/3] watchdog: s3c2410: Minor cleanups Krzysztof Kozlowski
[not found] ` <20170311174255.23327-1-krzk-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
2017-03-11 17:42 ` [PATCH v2 1/3] watchdog: s3c2410: Constify local structures Krzysztof Kozlowski
[not found] ` <20170311174255.23327-2-krzk-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
2017-03-12 20:56 ` Guenter Roeck
[not found] ` <d91a14cc-d741-f4ff-7411-64d4862b6e50-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org>
2017-03-13 6:47 ` Krzysztof Kozlowski
2017-03-11 17:42 ` [PATCH v2 2/3] watchdog: s3c2410: Simplify getting driver data Krzysztof Kozlowski
2017-03-12 21:00 ` Guenter Roeck
2017-03-11 17:42 ` Krzysztof Kozlowski [this message]
2017-03-12 21:01 ` [PATCH v2 3/3] watchdog: s3c2410: Minor code cleanup Guenter Roeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170311174255.23327-4-krzk@kernel.org \
--to=krzk@kernel.org \
--cc=javier@osg.samsung.com \
--cc=kgene@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=linux-watchdog@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=wim@iguana.be \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).