Linux-Samsung-soc Archive on lore.kernel.org
 help / color / Atom feed
From: Krzysztof Kozlowski <krzk@kernel.org>
To: Liam Girdwood <lgirdwood@gmail.com>,
	Mark Brown <broonie@kernel.org>,
	Chanwoo Choi <cw00.choi@samsung.com>,
	Krzysztof Kozlowski <krzk@kernel.org>,
	Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>,
	Sangbeom Kim <sbkim73@samsung.com>,
	linux-kernel@vger.kernel.org, linux-samsung-soc@vger.kernel.org
Subject: [PATCH 5/7] regulator: s2mps11: Constify regulator_ops
Date: Sat, 11 Mar 2017 21:01:22 +0200
Message-ID: <20170311190124.11512-5-krzk@kernel.org> (raw)
In-Reply-To: <20170311190124.11512-1-krzk@kernel.org>

Static struct regulator_ops is not modified so can be made const for
code safeness.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 drivers/regulator/s2mps11.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/regulator/s2mps11.c b/drivers/regulator/s2mps11.c
index d838e77dd947..7726b874e539 100644
--- a/drivers/regulator/s2mps11.c
+++ b/drivers/regulator/s2mps11.c
@@ -238,7 +238,7 @@ static int s2mps11_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
 				  1 << enable_shift, 0);
 }
 
-static struct regulator_ops s2mps11_ldo_ops = {
+static const struct regulator_ops s2mps11_ldo_ops = {
 	.list_voltage		= regulator_list_voltage_linear,
 	.map_voltage		= regulator_map_voltage_linear,
 	.is_enabled		= regulator_is_enabled_regmap,
@@ -249,7 +249,7 @@ static struct regulator_ops s2mps11_ldo_ops = {
 	.set_voltage_time_sel	= regulator_set_voltage_time_sel,
 };
 
-static struct regulator_ops s2mps11_buck_ops = {
+static const struct regulator_ops s2mps11_buck_ops = {
 	.list_voltage		= regulator_list_voltage_linear,
 	.map_voltage		= regulator_map_voltage_linear,
 	.is_enabled		= regulator_is_enabled_regmap,
@@ -392,7 +392,7 @@ static const struct regulator_desc s2mps11_regulators[] = {
 	regulator_desc_s2mps11_buck67810(10, MIN_750_MV, STEP_12_5_MV),
 };
 
-static struct regulator_ops s2mps14_reg_ops;
+static const struct regulator_ops s2mps14_reg_ops;
 
 #define regulator_desc_s2mps13_ldo(num, min, step, min_sel) {	\
 	.name		= "LDO"#num,				\
@@ -599,7 +599,7 @@ static int s2mps14_regulator_set_suspend_disable(struct regulator_dev *rdev)
 			rdev->desc->enable_mask, state);
 }
 
-static struct regulator_ops s2mps14_reg_ops = {
+static const struct regulator_ops s2mps14_reg_ops = {
 	.list_voltage		= regulator_list_voltage_linear,
 	.map_voltage		= regulator_map_voltage_linear,
 	.is_enabled		= regulator_is_enabled_regmap,
@@ -681,7 +681,7 @@ static const struct regulator_desc s2mps14_regulators[] = {
 				    S2MPS14_BUCK1235_START_SEL),
 };
 
-static struct regulator_ops s2mps15_reg_ldo_ops = {
+static const struct regulator_ops s2mps15_reg_ldo_ops = {
 	.list_voltage		= regulator_list_voltage_linear_range,
 	.map_voltage		= regulator_map_voltage_linear_range,
 	.is_enabled		= regulator_is_enabled_regmap,
@@ -691,7 +691,7 @@ static struct regulator_ops s2mps15_reg_ldo_ops = {
 	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
 };
 
-static struct regulator_ops s2mps15_reg_buck_ops = {
+static const struct regulator_ops s2mps15_reg_buck_ops = {
 	.list_voltage		= regulator_list_voltage_linear_range,
 	.map_voltage		= regulator_map_voltage_linear_range,
 	.is_enabled		= regulator_is_enabled_regmap,
@@ -886,7 +886,7 @@ static int s2mpu02_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
 				  ramp_val << ramp_shift);
 }
 
-static struct regulator_ops s2mpu02_ldo_ops = {
+static const struct regulator_ops s2mpu02_ldo_ops = {
 	.list_voltage		= regulator_list_voltage_linear,
 	.map_voltage		= regulator_map_voltage_linear,
 	.is_enabled		= regulator_is_enabled_regmap,
@@ -898,7 +898,7 @@ static struct regulator_ops s2mpu02_ldo_ops = {
 	.set_suspend_disable	= s2mps14_regulator_set_suspend_disable,
 };
 
-static struct regulator_ops s2mpu02_buck_ops = {
+static const struct regulator_ops s2mpu02_buck_ops = {
 	.list_voltage		= regulator_list_voltage_linear,
 	.map_voltage		= regulator_map_voltage_linear,
 	.is_enabled		= regulator_is_enabled_regmap,
-- 
2.9.3

  parent reply index

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <CGME20170311190141epcas2p2721283aa79819ca89f11815414ae5b4a@epcas2p2.samsung.com>
2017-03-11 19:01 ` [PATCH 1/7] regulator: max1586: " Krzysztof Kozlowski
2017-03-11 19:01   ` [PATCH 2/7] regulator: max77693: " Krzysztof Kozlowski
2017-03-13  4:55     ` Chanwoo Choi
2017-03-13 16:56     ` Applied "regulator: max77693: Constify regulator_ops" to the regulator tree Mark Brown
2017-03-11 19:01   ` [PATCH 3/7] regulator: max8660: Constify regulator_ops Krzysztof Kozlowski
2017-03-13 16:56     ` Applied "regulator: max8660: Constify regulator_ops" to the regulator tree Mark Brown
2017-03-11 19:01   ` [PATCH 4/7] regulator: s2mpa01: Constify regulator_ops Krzysztof Kozlowski
2017-03-13 16:56     ` Applied "regulator: s2mpa01: Constify regulator_ops" to the regulator tree Mark Brown
2017-03-11 19:01   ` Krzysztof Kozlowski [this message]
2017-03-13 16:56     ` Applied "regulator: s2mps11: " Mark Brown
2017-03-11 19:01   ` [PATCH 6/7] regulator: s5m8767: Constify regulator_ops Krzysztof Kozlowski
2017-03-13 16:56     ` Applied "regulator: s5m8767: Constify regulator_ops" to the regulator tree Mark Brown
2017-03-11 19:01   ` [PATCH 7/7] regulator: s2mpa01: Fix inconsistent indenting Krzysztof Kozlowski
2017-03-13 16:56     ` Applied "regulator: s2mpa01: Fix inconsistent indenting" to the regulator tree Mark Brown
2017-03-13  5:00   ` [PATCH 1/7] regulator: max1586: Constify regulator_ops Chanwoo Choi
2017-03-13 16:56   ` Applied "regulator: max1586: Constify regulator_ops" to the regulator tree Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170311190124.11512-5-krzk@kernel.org \
    --to=krzk@kernel.org \
    --cc=b.zolnierkie@samsung.com \
    --cc=broonie@kernel.org \
    --cc=cw00.choi@samsung.com \
    --cc=lgirdwood@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=sbkim73@samsung.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Samsung-soc Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-samsung-soc/0 linux-samsung-soc/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-samsung-soc linux-samsung-soc/ https://lore.kernel.org/linux-samsung-soc \
		linux-samsung-soc@vger.kernel.org
	public-inbox-index linux-samsung-soc

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-samsung-soc


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git