From: Krzysztof Kozlowski <krzk@kernel.org>
To: Lee Jones <lee.jones@linaro.org>, Kukjin Kim <kgene@kernel.org>,
Krzysztof Kozlowski <krzk@kernel.org>,
Javier Martinez Canillas <javier@osg.samsung.com>,
Kishon Vijay Abraham I <kishon@ti.com>,
Sylwester Nawrocki <s.nawrocki@samsung.com>,
Beomho Seo <beomho.seo@samsung.com>,
Inha Song <ideal.song@samsung.com>,
Marek Szyprowski <m.szyprowski@samsung.com>,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org
Subject: [PATCH v3 3/5] phy: exynos-mipi-video: Use consistent method to address phy registers
Date: Sat, 11 Mar 2017 22:00:19 +0200 [thread overview]
Message-ID: <20170311200021.5827-4-krzk@kernel.org> (raw)
In-Reply-To: <20170311200021.5827-1-krzk@kernel.org>
Exynos4 MIPI phy registers are defined with macro calculating the offset
for given phyN. Use the same method for Exynos5420 to be consistent.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
drivers/phy/phy-exynos-mipi-video.c | 20 ++++++++++----------
include/linux/soc/samsung/exynos-regs-pmu.h | 4 +---
2 files changed, 11 insertions(+), 13 deletions(-)
diff --git a/drivers/phy/phy-exynos-mipi-video.c b/drivers/phy/phy-exynos-mipi-video.c
index d7fe1f8c3ac8..acef1d92691e 100644
--- a/drivers/phy/phy-exynos-mipi-video.c
+++ b/drivers/phy/phy-exynos-mipi-video.c
@@ -110,46 +110,46 @@ static const struct mipi_phy_device_desc exynos5420_mipi_phy = {
/* EXYNOS_MIPI_PHY_ID_CSIS0 */
.coupled_phy_id = EXYNOS_MIPI_PHY_ID_DSIM0,
.enable_val = EXYNOS5_PHY_ENABLE,
- .enable_reg = EXYNOS5420_MIPI_PHY0_CONTROL,
+ .enable_reg = EXYNOS5420_MIPI_PHY_CONTROL(0),
.enable_map = EXYNOS_MIPI_REGMAP_PMU,
.resetn_val = EXYNOS5_MIPI_PHY_S_RESETN,
- .resetn_reg = EXYNOS5420_MIPI_PHY0_CONTROL,
+ .resetn_reg = EXYNOS5420_MIPI_PHY_CONTROL(0),
.resetn_map = EXYNOS_MIPI_REGMAP_PMU,
}, {
/* EXYNOS_MIPI_PHY_ID_DSIM0 */
.coupled_phy_id = EXYNOS_MIPI_PHY_ID_CSIS0,
.enable_val = EXYNOS5_PHY_ENABLE,
- .enable_reg = EXYNOS5420_MIPI_PHY0_CONTROL,
+ .enable_reg = EXYNOS5420_MIPI_PHY_CONTROL(0),
.enable_map = EXYNOS_MIPI_REGMAP_PMU,
.resetn_val = EXYNOS5_MIPI_PHY_M_RESETN,
- .resetn_reg = EXYNOS5420_MIPI_PHY0_CONTROL,
+ .resetn_reg = EXYNOS5420_MIPI_PHY_CONTROL(0),
.resetn_map = EXYNOS_MIPI_REGMAP_PMU,
}, {
/* EXYNOS_MIPI_PHY_ID_CSIS1 */
.coupled_phy_id = EXYNOS_MIPI_PHY_ID_DSIM1,
.enable_val = EXYNOS5_PHY_ENABLE,
- .enable_reg = EXYNOS5420_MIPI_PHY1_CONTROL,
+ .enable_reg = EXYNOS5420_MIPI_PHY_CONTROL(1),
.enable_map = EXYNOS_MIPI_REGMAP_PMU,
.resetn_val = EXYNOS5_MIPI_PHY_S_RESETN,
- .resetn_reg = EXYNOS5420_MIPI_PHY1_CONTROL,
+ .resetn_reg = EXYNOS5420_MIPI_PHY_CONTROL(1),
.resetn_map = EXYNOS_MIPI_REGMAP_PMU,
}, {
/* EXYNOS_MIPI_PHY_ID_DSIM1 */
.coupled_phy_id = EXYNOS_MIPI_PHY_ID_CSIS1,
.enable_val = EXYNOS5_PHY_ENABLE,
- .enable_reg = EXYNOS5420_MIPI_PHY1_CONTROL,
+ .enable_reg = EXYNOS5420_MIPI_PHY_CONTROL(1),
.enable_map = EXYNOS_MIPI_REGMAP_PMU,
.resetn_val = EXYNOS5_MIPI_PHY_M_RESETN,
- .resetn_reg = EXYNOS5420_MIPI_PHY1_CONTROL,
+ .resetn_reg = EXYNOS5420_MIPI_PHY_CONTROL(1),
.resetn_map = EXYNOS_MIPI_REGMAP_PMU,
}, {
/* EXYNOS_MIPI_PHY_ID_CSIS2 */
.coupled_phy_id = EXYNOS_MIPI_PHY_ID_NONE,
.enable_val = EXYNOS5_PHY_ENABLE,
- .enable_reg = EXYNOS5420_MIPI_PHY2_CONTROL,
+ .enable_reg = EXYNOS5420_MIPI_PHY_CONTROL(2),
.enable_map = EXYNOS_MIPI_REGMAP_PMU,
.resetn_val = EXYNOS5_MIPI_PHY_S_RESETN,
- .resetn_reg = EXYNOS5420_MIPI_PHY2_CONTROL,
+ .resetn_reg = EXYNOS5420_MIPI_PHY_CONTROL(2),
.resetn_map = EXYNOS_MIPI_REGMAP_PMU,
},
},
diff --git a/include/linux/soc/samsung/exynos-regs-pmu.h b/include/linux/soc/samsung/exynos-regs-pmu.h
index 4ee54b3fcd57..c261ed927e1e 100644
--- a/include/linux/soc/samsung/exynos-regs-pmu.h
+++ b/include/linux/soc/samsung/exynos-regs-pmu.h
@@ -505,9 +505,7 @@
((EXYNOS5420_KFC_CORE_RESET0 | EXYNOS5420_KFC_ETM_RESET0) << (_nr))
#define EXYNOS5420_USBDRD1_PHY_CONTROL 0x0708
-#define EXYNOS5420_MIPI_PHY0_CONTROL 0x0714
-#define EXYNOS5420_MIPI_PHY1_CONTROL 0x0718
-#define EXYNOS5420_MIPI_PHY2_CONTROL 0x071C
+#define EXYNOS5420_MIPI_PHY_CONTROL(n) (0x0714 + (n) * 4)
#define EXYNOS5420_DPTX_PHY_CONTROL 0x0728
#define EXYNOS5420_ARM_CORE2_SYS_PWR_REG 0x1020
#define EXYNOS5420_DIS_IRQ_ARM_CORE2_LOCAL_SYS_PWR_REG 0x1024
--
2.9.3
next prev parent reply other threads:[~2017-03-11 20:01 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-03-11 20:00 [PATCH v3 0/5] phy/mfd/soc: exynos: Header cleanup Krzysztof Kozlowski
2017-03-11 20:00 ` [PATCH v3 1/5] phy: exynos4: Remove duplicated defines of PHY register defines Krzysztof Kozlowski
2017-03-11 20:00 ` [PATCH v3 2/5] phy: exynos5: " Krzysztof Kozlowski
2017-03-11 20:00 ` Krzysztof Kozlowski [this message]
2017-03-11 20:00 ` [PATCH v3 4/5] mfd: exynos-lpass: Use common soc/exynos-regs-pmu.h header Krzysztof Kozlowski
2017-03-11 20:00 ` [PATCH v3 5/5] phy: exynos: Use one define for enable bit Krzysztof Kozlowski
2017-03-15 11:13 ` Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170311200021.5827-4-krzk@kernel.org \
--to=krzk@kernel.org \
--cc=beomho.seo@samsung.com \
--cc=ideal.song@samsung.com \
--cc=javier@osg.samsung.com \
--cc=kgene@kernel.org \
--cc=kishon@ti.com \
--cc=lee.jones@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=m.szyprowski@samsung.com \
--cc=s.nawrocki@samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).