linux-samsung-soc.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Artur Świgoń" <a.swigon@samsung.com>
To: linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-samsung-soc@vger.kernel.org, linux-pm@vger.kernel.org
Cc: "Artur Świgoń" <a.swigon@samsung.com>,
	cw00.choi@samsung.com, myungjoo.ham@samsung.com,
	kyungmin.park@samsung.com, kgene@kernel.org, krzk@kernel.org,
	b.zolnierkie@samsung.com, m.szyprowski@samsung.com,
	inki.dae@samsung.com, sw0312.kim@samsung.com,
	k.konieczny@samsung.com, leonard.crestez@nxp.com
Subject: [PATCH v3 4/4] devfreq: exynos-bus: Clean up code
Date: Mon,  9 Dec 2019 11:49:02 +0100	[thread overview]
Message-ID: <20191209104902.11904-5-a.swigon@samsung.com> (raw)
In-Reply-To: <20191209104902.11904-1-a.swigon@samsung.com>

This patch adds minor improvements to the exynos-bus driver, including
cleaning up header includes, variables, and return paths.

Signed-off-by: Artur Świgoń <a.swigon@samsung.com>
---
 drivers/devfreq/exynos-bus.c | 56 +++++++++++++++---------------------
 1 file changed, 23 insertions(+), 33 deletions(-)

diff --git a/drivers/devfreq/exynos-bus.c b/drivers/devfreq/exynos-bus.c
index 0b557df63666..3eb6a043284a 100644
--- a/drivers/devfreq/exynos-bus.c
+++ b/drivers/devfreq/exynos-bus.c
@@ -15,11 +15,10 @@
 #include <linux/device.h>
 #include <linux/export.h>
 #include <linux/module.h>
-#include <linux/of_device.h>
+#include <linux/of.h>
 #include <linux/pm_opp.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/consumer.h>
-#include <linux/slab.h>
 
 #define DEFAULT_SATURATION_RATIO	40
 
@@ -178,7 +177,7 @@ static int exynos_bus_parent_parse_of(struct device_node *np,
 	struct device *dev = bus->dev;
 	struct opp_table *opp_table;
 	const char *vdd = "vdd";
-	int i, ret, count, size;
+	int i, ret, count;
 
 	opp_table = dev_pm_opp_set_regulators(dev, &vdd, 1);
 	if (IS_ERR(opp_table)) {
@@ -201,8 +200,7 @@ static int exynos_bus_parent_parse_of(struct device_node *np,
 	}
 	bus->edev_count = count;
 
-	size = sizeof(*bus->edev) * count;
-	bus->edev = devm_kzalloc(dev, size, GFP_KERNEL);
+	bus->edev = devm_kcalloc(dev, count, sizeof(*bus->edev), GFP_KERNEL);
 	if (!bus->edev) {
 		ret = -ENOMEM;
 		goto err_regulator;
@@ -301,10 +299,9 @@ static int exynos_bus_profile_init(struct exynos_bus *bus,
 	profile->exit = exynos_bus_exit;
 
 	ondemand_data = devm_kzalloc(dev, sizeof(*ondemand_data), GFP_KERNEL);
-	if (!ondemand_data) {
-		ret = -ENOMEM;
-		goto err;
-	}
+	if (!ondemand_data)
+		return -ENOMEM;
+
 	ondemand_data->upthreshold = 40;
 	ondemand_data->downdifferential = 5;
 
@@ -314,15 +311,14 @@ static int exynos_bus_profile_init(struct exynos_bus *bus,
 						ondemand_data);
 	if (IS_ERR(bus->devfreq)) {
 		dev_err(dev, "failed to add devfreq device\n");
-		ret = PTR_ERR(bus->devfreq);
-		goto err;
+		return PTR_ERR(bus->devfreq);
 	}
 
 	/* Register opp_notifier to catch the change of OPP  */
 	ret = devm_devfreq_register_opp_notifier(dev, bus->devfreq);
 	if (ret < 0) {
 		dev_err(dev, "failed to register opp notifier\n");
-		goto err;
+		return ret;
 	}
 
 	/*
@@ -332,17 +328,16 @@ static int exynos_bus_profile_init(struct exynos_bus *bus,
 	ret = exynos_bus_enable_edev(bus);
 	if (ret < 0) {
 		dev_err(dev, "failed to enable devfreq-event devices\n");
-		goto err;
+		return ret;
 	}
 
 	ret = exynos_bus_set_event(bus);
 	if (ret < 0) {
 		dev_err(dev, "failed to set event to devfreq-event devices\n");
-		goto err;
+		return ret;
 	}
 
-err:
-	return ret;
+	return 0;
 }
 
 static int exynos_bus_profile_init_passive(struct exynos_bus *bus,
@@ -351,7 +346,6 @@ static int exynos_bus_profile_init_passive(struct exynos_bus *bus,
 	struct device *dev = bus->dev;
 	struct devfreq_passive_data *passive_data;
 	struct devfreq *parent_devfreq;
-	int ret = 0;
 
 	/* Initialize the struct profile and governor data for passive device */
 	profile->target = exynos_bus_target;
@@ -359,30 +353,26 @@ static int exynos_bus_profile_init_passive(struct exynos_bus *bus,
 
 	/* Get the instance of parent devfreq device */
 	parent_devfreq = devfreq_get_devfreq_by_phandle(dev, 0);
-	if (IS_ERR(parent_devfreq)) {
-		ret = -EPROBE_DEFER;
-		goto err;
-	}
+	if (IS_ERR(parent_devfreq))
+		return -EPROBE_DEFER;
 
 	passive_data = devm_kzalloc(dev, sizeof(*passive_data), GFP_KERNEL);
-	if (!passive_data) {
-		ret = -ENOMEM;
-		goto err;
-	}
+	if (!passive_data)
+		return -ENOMEM;
+
 	passive_data->parent = parent_devfreq;
 
 	/* Add devfreq device for exynos bus with passive governor */
-	bus->devfreq = devm_devfreq_add_device(dev, profile, DEVFREQ_GOV_PASSIVE,
+	bus->devfreq = devm_devfreq_add_device(dev, profile,
+						DEVFREQ_GOV_PASSIVE,
 						passive_data);
 	if (IS_ERR(bus->devfreq)) {
 		dev_err(dev,
 			"failed to add devfreq dev with passive governor\n");
-		ret = PTR_ERR(bus->devfreq);
-		goto err;
+		return PTR_ERR(bus->devfreq);
 	}
 
-err:
-	return ret;
+	return 0;
 }
 
 static int exynos_bus_probe(struct platform_device *pdev)
@@ -400,18 +390,18 @@ static int exynos_bus_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
-	bus = devm_kzalloc(&pdev->dev, sizeof(*bus), GFP_KERNEL);
+	bus = devm_kzalloc(dev, sizeof(*bus), GFP_KERNEL);
 	if (!bus)
 		return -ENOMEM;
 	mutex_init(&bus->lock);
-	bus->dev = &pdev->dev;
+	bus->dev = dev;
 	platform_set_drvdata(pdev, bus);
 
 	profile = devm_kzalloc(dev, sizeof(*profile), GFP_KERNEL);
 	if (!profile)
 		return -ENOMEM;
 
-	node = of_parse_phandle(dev->of_node, "devfreq", 0);
+	node = of_parse_phandle(np, "devfreq", 0);
 	if (node) {
 		of_node_put(node);
 		passive = true;
-- 
2.17.1


  parent reply	other threads:[~2019-12-09 10:50 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <CGME20191209105030eucas1p11e28297118da5a1d9f3a8c955584a4bf@eucas1p1.samsung.com>
2019-12-09 10:48 ` [PATCH v3 0/4] devfreq: Clean up exynos-bus driver Artur Świgoń
     [not found]   ` <CGME20191209105031eucas1p137c3c5b0046570453e1ebed2dcd88277@eucas1p1.samsung.com>
2019-12-09 10:48     ` [PATCH v3 1/4] devfreq: exynos-bus: Extract exynos_bus_profile_init() Artur Świgoń
2019-12-10  4:20       ` Chanwoo Choi
     [not found]   ` <CGME20191209105032eucas1p13fa6c46a1e80cdda68ab4bac3e008b8f@eucas1p1.samsung.com>
2019-12-09 10:49     ` [PATCH v3 2/4] devfreq: exynos-bus: Extract exynos_bus_profile_init_passive() Artur Świgoń
2019-12-10  4:20       ` Chanwoo Choi
     [not found]   ` <CGME20191209105033eucas1p21ee8064e1d6917b403c06ee59a97421d@eucas1p2.samsung.com>
2019-12-09 10:49     ` [PATCH v3 3/4] devfreq: exynos-bus: Change goto-based logic to if-else logic Artur Świgoń
     [not found]   ` <CGME20191209105034eucas1p277be9a40363fec76b4241d28e71e40d2@eucas1p2.samsung.com>
2019-12-09 10:49     ` Artur Świgoń [this message]
2019-12-10  4:20       ` [PATCH v3 4/4] devfreq: exynos-bus: Clean up code Chanwoo Choi
2019-12-11 14:39         ` Artur Świgoń
2019-12-12  1:52           ` Chanwoo Choi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191209104902.11904-5-a.swigon@samsung.com \
    --to=a.swigon@samsung.com \
    --cc=b.zolnierkie@samsung.com \
    --cc=cw00.choi@samsung.com \
    --cc=inki.dae@samsung.com \
    --cc=k.konieczny@samsung.com \
    --cc=kgene@kernel.org \
    --cc=krzk@kernel.org \
    --cc=kyungmin.park@samsung.com \
    --cc=leonard.crestez@nxp.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=m.szyprowski@samsung.com \
    --cc=myungjoo.ham@samsung.com \
    --cc=sw0312.kim@samsung.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).