Linux-Samsung-soc Archive on lore.kernel.org
 help / color / Atom feed
From: Marek Szyprowski <m.szyprowski@samsung.com>
To: linux-kernel@vger.kernel.org, linux-pm@vger.kernel.org,
	Mark Brown <broonie@kernel.org>,
	Dmitry Osipenko <digetx@gmail.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>,
	Liam Girdwood <lgirdwood@gmail.com>,
	Lucas Stach <l.stach@pengutronix.de>,
	Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>,
	Krzysztof Kozlowski <krzk@kernel.org>,
	Viresh Kumar <viresh.kumar@linaro.org>,
	peron.clem@gmail.com, Nishanth Menon <nm@ti.com>,
	Stephen Boyd <sboyd@kernel.org>,
	Vincent Guittot <vincent.guittot@linaro.org>,
	Rafael Wysocki <rjw@rjwysocki.net>,
	linux-samsung-soc@vger.kernel.org,
	Chanwoo Choi <cw00.choi@samsung.com>
Subject: [PATCH 1/2] regulator: extract voltage balancing code to the separate function
Date: Fri, 29 May 2020 14:49:39 +0200
Message-ID: <20200529124940.10675-2-m.szyprowski@samsung.com> (raw)
In-Reply-To: <20200529124940.10675-1-m.szyprowski@samsung.com>

Move the coupled regulators voltage balancing code to the separate
function and allow to call it from the custom regulator couplers.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
---
 drivers/regulator/core.c          | 49 ++++++++++++++++++-------------
 include/linux/regulator/coupler.h |  8 +++++
 2 files changed, 37 insertions(+), 20 deletions(-)

diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index 941783a14b45..370c655ad8f6 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -3642,36 +3642,19 @@ static int regulator_get_optimal_voltage(struct regulator_dev *rdev,
 	return done;
 }
 
-static int regulator_balance_voltage(struct regulator_dev *rdev,
-				     suspend_state_t state)
+int regulator_do_balance_voltage(struct regulator_dev *rdev,
+				 suspend_state_t state, bool skip_coupled)
 {
 	struct regulator_dev **c_rdevs;
 	struct regulator_dev *best_rdev;
 	struct coupling_desc *c_desc = &rdev->coupling_desc;
-	struct regulator_coupler *coupler = c_desc->coupler;
 	int i, ret, n_coupled, best_min_uV, best_max_uV, best_c_rdev;
 	unsigned int delta, best_delta;
 	unsigned long c_rdev_done = 0;
 	bool best_c_rdev_done;
 
 	c_rdevs = c_desc->coupled_rdevs;
-	n_coupled = c_desc->n_coupled;
-
-	/*
-	 * If system is in a state other than PM_SUSPEND_ON, don't check
-	 * other coupled regulators.
-	 */
-	if (state != PM_SUSPEND_ON)
-		n_coupled = 1;
-
-	if (c_desc->n_resolved < n_coupled) {
-		rdev_err(rdev, "Not all coupled regulators registered\n");
-		return -EPERM;
-	}
-
-	/* Invoke custom balancer for customized couplers */
-	if (coupler && coupler->balance_voltage)
-		return coupler->balance_voltage(coupler, rdev, state);
+	n_coupled = skip_coupled ? 1 : c_desc->n_coupled;
 
 	/*
 	 * Find the best possible voltage change on each loop. Leave the loop
@@ -3742,6 +3725,32 @@ static int regulator_balance_voltage(struct regulator_dev *rdev,
 	return ret;
 }
 
+static int regulator_balance_voltage(struct regulator_dev *rdev,
+				     suspend_state_t state)
+{
+	struct coupling_desc *c_desc = &rdev->coupling_desc;
+	struct regulator_coupler *coupler = c_desc->coupler;
+	bool skip_coupled = false;
+
+	/*
+	 * If system is in a state other than PM_SUSPEND_ON, don't check
+	 * other coupled regulators.
+	 */
+	if (state != PM_SUSPEND_ON)
+		skip_coupled = true;
+
+	if (c_desc->n_resolved < c_desc->n_coupled) {
+		rdev_err(rdev, "Not all coupled regulators registered\n");
+		return -EPERM;
+	}
+
+	/* Invoke custom balancer for customized couplers */
+	if (coupler && coupler->balance_voltage)
+		return coupler->balance_voltage(coupler, rdev, state);
+
+	return regulator_do_balance_voltage(rdev, state, skip_coupled);
+}
+
 /**
  * regulator_set_voltage - set regulator output voltage
  * @regulator: regulator source
diff --git a/include/linux/regulator/coupler.h b/include/linux/regulator/coupler.h
index 0212d6255e4e..5f86824bd117 100644
--- a/include/linux/regulator/coupler.h
+++ b/include/linux/regulator/coupler.h
@@ -62,6 +62,8 @@ int regulator_get_voltage_rdev(struct regulator_dev *rdev);
 int regulator_set_voltage_rdev(struct regulator_dev *rdev,
 			       int min_uV, int max_uV,
 			       suspend_state_t state);
+int regulator_do_balance_voltage(struct regulator_dev *rdev,
+				 suspend_state_t state, bool skip_coupled);
 #else
 static inline int regulator_coupler_register(struct regulator_coupler *coupler)
 {
@@ -92,6 +94,12 @@ static inline int regulator_set_voltage_rdev(struct regulator_dev *rdev,
 {
 	return -EINVAL;
 }
+static inline int regulator_do_balance_voltage(struct regulator_dev *rdev,
+					       suspend_state_t state,
+					       bool skip_coupled)
+{
+	return -EINVAL;
+}
 #endif
 
 #endif
-- 
2.17.1


  parent reply index

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <CGME20200529124948eucas1p175379ead8afd1932f7b7ae61e35cf632@eucas1p1.samsung.com>
2020-05-29 12:49 ` [PATCH 0/2] Fix regulators coupling for Exynos5800 Marek Szyprowski
     [not found]   ` <CGME20200529124951eucas1p213c748fb481a37cf98918caae5e30fd2@eucas1p2.samsung.com>
2020-05-29 12:49     ` Marek Szyprowski [this message]
     [not found]   ` <CGME20200529124952eucas1p2565c598c3c0164b5dec6ed83e19148b8@eucas1p2.samsung.com>
2020-05-29 12:49     ` [PATCH 2/2] soc: samsung: Add simple voltage coupler " Marek Szyprowski
2020-05-29 17:43       ` Krzysztof Kozlowski
2020-06-01  6:28         ` Marek Szyprowski
     [not found]           ` <CGME20200602130931eucas1p1cd784c8f692fa91dc566504543a927de@eucas1p1.samsung.com>
2020-06-02 13:02             ` [PATCH v2] " Marek Szyprowski
2020-06-02 15:15               ` Dmitry Osipenko
2020-06-04 13:28                 ` Marek Szyprowski
2020-05-29 16:52   ` [PATCH 0/2] Fix regulators coupling " Mark Brown
2020-05-29 16:58     ` Mark Brown
2020-05-29 17:33       ` Krzysztof Kozlowski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200529124940.10675-2-m.szyprowski@samsung.com \
    --to=m.szyprowski@samsung.com \
    --cc=b.zolnierkie@samsung.com \
    --cc=broonie@kernel.org \
    --cc=cw00.choi@samsung.com \
    --cc=digetx@gmail.com \
    --cc=krzk@kernel.org \
    --cc=l.stach@pengutronix.de \
    --cc=lgirdwood@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=nm@ti.com \
    --cc=peron.clem@gmail.com \
    --cc=rjw@rjwysocki.net \
    --cc=sboyd@kernel.org \
    --cc=vincent.guittot@linaro.org \
    --cc=viresh.kumar@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Samsung-soc Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-samsung-soc/0 linux-samsung-soc/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-samsung-soc linux-samsung-soc/ https://lore.kernel.org/linux-samsung-soc \
		linux-samsung-soc@vger.kernel.org
	public-inbox-index linux-samsung-soc

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-samsung-soc


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git