From: Krzysztof Kozlowski <krzk@kernel.org>
To: "Thierry Reding" <thierry.reding@gmail.com>,
"Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>,
"Lee Jones" <lee.jones@linaro.org>,
"Rob Herring" <robh+dt@kernel.org>,
"Kukjin Kim" <kgene@kernel.org>,
"Krzysztof Kozlowski" <krzk@kernel.org>,
linux-pwm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org
Cc: Marek Szyprowski <m.szyprowski@samsung.com>,
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>,
Sylwester Nawrocki <snawrocki@kernel.org>,
Alim Akhtar <alim.akhtar@samsung.com>,
Chanwoo Choi <cw00.choi@samsung.com>,
Pankaj Dubey <pankaj.dubey@samsung.com>
Subject: [PATCH v2 4/8] arm64: dts: exynos: Remove DMA controller bus node name to fix dtschema warnings
Date: Thu, 2 Jul 2020 17:51:45 +0200 [thread overview]
Message-ID: <20200702155149.12854-4-krzk@kernel.org> (raw)
In-Reply-To: <20200702155149.12854-1-krzk@kernel.org>
There is no need to keep DMA controller nodes under AMBA bus node.
Remove the "amba" node to fix dtschema warnings like:
amba: $nodename:0: 'amba' does not match '^(bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
Changes since v1:
1. Remove the bus, as suggested by Marek
---
arch/arm64/boot/dts/exynos/exynos5433.dtsi | 47 +++++++++-------------
arch/arm64/boot/dts/exynos/exynos7.dtsi | 47 +++++++++-------------
2 files changed, 40 insertions(+), 54 deletions(-)
diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
index 57b433a1c900..74ac4ac75865 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
@@ -1756,33 +1756,26 @@
status = "disabled";
};
- amba {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- pdma0: pdma@15610000 {
- compatible = "arm,pl330", "arm,primecell";
- reg = <0x15610000 0x1000>;
- interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cmu_fsys CLK_PDMA0>;
- clock-names = "apb_pclk";
- #dma-cells = <1>;
- #dma-channels = <8>;
- #dma-requests = <32>;
- };
-
- pdma1: pdma@15600000 {
- compatible = "arm,pl330", "arm,primecell";
- reg = <0x15600000 0x1000>;
- interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cmu_fsys CLK_PDMA1>;
- clock-names = "apb_pclk";
- #dma-cells = <1>;
- #dma-channels = <8>;
- #dma-requests = <32>;
- };
+ pdma0: pdma@15610000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x15610000 0x1000>;
+ interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cmu_fsys CLK_PDMA0>;
+ clock-names = "apb_pclk";
+ #dma-cells = <1>;
+ #dma-channels = <8>;
+ #dma-requests = <32>;
+ };
+
+ pdma1: pdma@15600000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x15600000 0x1000>;
+ interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cmu_fsys CLK_PDMA1>;
+ clock-names = "apb_pclk";
+ #dma-cells = <1>;
+ #dma-channels = <8>;
+ #dma-requests = <32>;
};
audio-subsystem@11400000 {
diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi
index c0b63b0d39ab..b9ed6a33e290 100644
--- a/arch/arm64/boot/dts/exynos/exynos7.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi
@@ -105,33 +105,26 @@
<0x11006000 0x2000>;
};
- amba {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- pdma0: pdma@10e10000 {
- compatible = "arm,pl330", "arm,primecell";
- reg = <0x10E10000 0x1000>;
- interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clock_fsys0 ACLK_PDMA0>;
- clock-names = "apb_pclk";
- #dma-cells = <1>;
- #dma-channels = <8>;
- #dma-requests = <32>;
- };
-
- pdma1: pdma@10eb0000 {
- compatible = "arm,pl330", "arm,primecell";
- reg = <0x10EB0000 0x1000>;
- interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clock_fsys0 ACLK_PDMA1>;
- clock-names = "apb_pclk";
- #dma-cells = <1>;
- #dma-channels = <8>;
- #dma-requests = <32>;
- };
+ pdma0: pdma@10e10000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x10E10000 0x1000>;
+ interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clock_fsys0 ACLK_PDMA0>;
+ clock-names = "apb_pclk";
+ #dma-cells = <1>;
+ #dma-channels = <8>;
+ #dma-requests = <32>;
+ };
+
+ pdma1: pdma@10eb0000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x10EB0000 0x1000>;
+ interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clock_fsys0 ACLK_PDMA1>;
+ clock-names = "apb_pclk";
+ #dma-cells = <1>;
+ #dma-channels = <8>;
+ #dma-requests = <32>;
};
clock_topc: clock-controller@10570000 {
--
2.17.1
next prev parent reply other threads:[~2020-07-02 15:52 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-02 15:51 [PATCH v2 1/8] dt-bindings: pwm: samsung: Do not require interrupts on Exynos SoCs Krzysztof Kozlowski
2020-07-02 15:51 ` [PATCH v2 2/8] arm64: dts: exynos: Describe PWM interrupts on Exynos7 Krzysztof Kozlowski
2020-07-03 17:10 ` Alim Akhtar
2020-07-03 18:01 ` Krzysztof Kozlowski
2020-07-02 15:51 ` [PATCH v2 3/8] arm64: dts: exynos: Remove generic arm,armv8-pmuv3 compatible Krzysztof Kozlowski
2020-07-03 17:17 ` Alim Akhtar
2020-07-03 18:01 ` Krzysztof Kozlowski
2020-07-02 15:51 ` Krzysztof Kozlowski [this message]
2020-07-03 17:23 ` [PATCH v2 4/8] arm64: dts: exynos: Remove DMA controller bus node name to fix dtschema warnings Alim Akhtar
2020-07-07 6:44 ` Krzysztof Kozlowski
2020-07-02 15:51 ` [PATCH v2 5/8] ARM: " Krzysztof Kozlowski
2020-07-02 20:34 ` Marek Szyprowski
2020-07-05 18:13 ` Krzysztof Kozlowski
2020-07-02 15:51 ` [PATCH v2 6/8] ARM: dts: exynos: Define fixed regulators in root node for consistency in Origen Krzysztof Kozlowski
2020-07-02 15:51 ` [PATCH v2 7/8] ARM: dts: exynos: Define fixed regulators in root node for consistency in Arndale Krzysztof Kozlowski
2020-07-02 15:51 ` [PATCH v2 8/8] ARM: dts: exynos: Define fixed regulators in root node for consistency in SMDK5420 Krzysztof Kozlowski
2020-07-06 9:41 ` [PATCH v2 1/8] dt-bindings: pwm: samsung: Do not require interrupts on Exynos SoCs Uwe Kleine-König
2020-07-07 18:50 ` Krzysztof Kozlowski
2020-07-14 2:46 ` Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200702155149.12854-4-krzk@kernel.org \
--to=krzk@kernel.org \
--cc=alim.akhtar@samsung.com \
--cc=b.zolnierkie@samsung.com \
--cc=cw00.choi@samsung.com \
--cc=devicetree@vger.kernel.org \
--cc=kgene@kernel.org \
--cc=lee.jones@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pwm@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=m.szyprowski@samsung.com \
--cc=pankaj.dubey@samsung.com \
--cc=robh+dt@kernel.org \
--cc=snawrocki@kernel.org \
--cc=thierry.reding@gmail.com \
--cc=u.kleine-koenig@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).