linux-samsung-soc.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Krzysztof Kozlowski <krzk@kernel.org>
To: "David S. Miller" <davem@davemloft.net>,
	Jakub Kicinski <kuba@kernel.org>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Opasiak <k.opasiak@samsung.com>,
	Kukjin Kim <kgene@kernel.org>,
	Krzysztof Kozlowski <krzk@kernel.org>,
	netdev@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-nfc@lists.01.org,
	linux-arm-kernel@lists.infradead.org,
	linux-samsung-soc@vger.kernel.org
Cc: Marek Szyprowski <m.szyprowski@samsung.com>,
	Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>,
	Sylwester Nawrocki <snawrocki@kernel.org>,
	Chanwoo Choi <cw00.choi@samsung.com>,
	Inki Dae <inki.dae@samsung.com>
Subject: [PATCH 1/4] dt-bindings: net: nfc: s3fwrn5: Convert to dtschema
Date: Sat, 29 Aug 2020 16:29:45 +0200	[thread overview]
Message-ID: <20200829142948.32365-1-krzk@kernel.org> (raw)

Convert the Samsung S3FWRN5 NCI NFC controller bindings to dtschema.
This is conversion only so it includes properties with invalid prefixes
(s3fwrn5,en-gpios) which should be addressed later.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 .../devicetree/bindings/net/nfc/s3fwrn5.txt   | 25 --------
 .../devicetree/bindings/net/nfc/s3fwrn5.yaml  | 59 +++++++++++++++++++
 MAINTAINERS                                   |  1 +
 3 files changed, 60 insertions(+), 25 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/net/nfc/s3fwrn5.txt
 create mode 100644 Documentation/devicetree/bindings/net/nfc/s3fwrn5.yaml

diff --git a/Documentation/devicetree/bindings/net/nfc/s3fwrn5.txt b/Documentation/devicetree/bindings/net/nfc/s3fwrn5.txt
deleted file mode 100644
index f02f6fb7f81c..000000000000
--- a/Documentation/devicetree/bindings/net/nfc/s3fwrn5.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-* Samsung S3FWRN5 NCI NFC Controller
-
-Required properties:
-- compatible: Should be "samsung,s3fwrn5-i2c".
-- reg: address on the bus
-- interrupts: GPIO interrupt to which the chip is connected
-- s3fwrn5,en-gpios: Output GPIO pin used for enabling/disabling the chip
-- s3fwrn5,fw-gpios: Output GPIO pin used to enter firmware mode and
-  sleep/wakeup control
-
-Example:
-
-&hsi2c_4 {
-	s3fwrn5@27 {
-		compatible = "samsung,s3fwrn5-i2c";
-
-		reg = <0x27>;
-
-		interrupt-parent = <&gpa1>;
-		interrupts = <3 0 0>;
-
-		s3fwrn5,en-gpios = <&gpf1 4 0>;
-		s3fwrn5,fw-gpios = <&gpj0 2 0>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/net/nfc/s3fwrn5.yaml b/Documentation/devicetree/bindings/net/nfc/s3fwrn5.yaml
new file mode 100644
index 000000000000..c22451dea350
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/nfc/s3fwrn5.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/nfc/s3fwrn5.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S3FWRN5 NCI NFC Controller
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Krzysztof Opasiak <k.opasiak@samsung.com>
+
+properties:
+  compatible:
+    const: samsung,s3fwrn5-i2c
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  s3fwrn5,en-gpios:
+    maxItems: 1
+    description:
+      Output GPIO pin used for enabling/disabling the chip
+
+  s3fwrn5,fw-gpios:
+    maxItems: 1
+    description:
+      Output GPIO pin used to enter firmware mode and sleep/wakeup control
+
+required:
+  - compatible
+  - interrupts
+  - reg
+  - s3fwrn5,en-gpios
+  - s3fwrn5,fw-gpios
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c4 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        s3fwrn5@27 {
+            compatible = "samsung,s3fwrn5-i2c";
+            reg = <0x27>;
+
+            interrupt-parent = <&gpa1>;
+            interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+
+            s3fwrn5,en-gpios = <&gpf1 4 GPIO_ACTIVE_HIGH>;
+            s3fwrn5,fw-gpios = <&gpj0 2 GPIO_ACTIVE_HIGH>;
+        };
+    };
diff --git a/MAINTAINERS b/MAINTAINERS
index ac79fdbdf8d0..91b3d5c349d8 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -15273,6 +15273,7 @@ M:	Robert Baldyga <r.baldyga@samsung.com>
 M:	Krzysztof Opasiak <k.opasiak@samsung.com>
 L:	linux-nfc@lists.01.org (moderated for non-subscribers)
 S:	Supported
+F:	Documentation/devicetree/bindings/net/nfc/s3fwrn5.yaml
 F:	drivers/nfc/s3fwrn5
 
 SAMSUNG S5C73M3 CAMERA DRIVER
-- 
2.17.1


             reply	other threads:[~2020-08-29 14:30 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-08-29 14:29 Krzysztof Kozlowski [this message]
2020-08-29 14:29 ` [PATCH 2/4] dt-bindings: net: nfc: s3fwrn5: Remove wrong vendor prefix from GPIOs Krzysztof Kozlowski
2020-08-29 14:29 ` [RFT 3/4] " Krzysztof Kozlowski
2020-08-31 13:16   ` Marek Szyprowski
2020-08-29 14:29 ` [PATCH 4/4] arm64: dts: exynos: Use newer S3FWRN5 GPIO properties in Exynos5433 TM2 Krzysztof Kozlowski
2020-08-31 13:16   ` Marek Szyprowski
2020-08-31 13:51     ` Krzysztof Kozlowski
2020-09-03 16:32 ` [PATCH 1/4] dt-bindings: net: nfc: s3fwrn5: Convert to dtschema Rob Herring
2020-09-06 14:38   ` Krzysztof Kozlowski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200829142948.32365-1-krzk@kernel.org \
    --to=krzk@kernel.org \
    --cc=b.zolnierkie@samsung.com \
    --cc=cw00.choi@samsung.com \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=inki.dae@samsung.com \
    --cc=k.opasiak@samsung.com \
    --cc=kgene@kernel.org \
    --cc=kuba@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-nfc@lists.01.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=m.szyprowski@samsung.com \
    --cc=netdev@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=snawrocki@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).