[PATCH v3 06/10] regulator: dt-bindings: samsung,s5m8767: convert to dtschema

[Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>]

Convert the regulators of Samsung S5M8767 PMIC to DT schema format.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
---
 .../bindings/regulator/samsung,s5m8767.txt    | 140 ------------------
 .../bindings/regulator/samsung,s5m8767.yaml   |  74 +++++++++
 MAINTAINERS                                   |   2 +-
 3 files changed, 75 insertions(+), 141 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/regulator/samsung,s5m8767.txt
 create mode 100644 Documentation/devicetree/bindings/regulator/samsung,s5m8767.yaml

diff --git a/Documentation/devicetree/bindings/regulator/samsung,s5m8767.txt b/Documentation/devicetree/bindings/regulator/samsung,s5m8767.txt
deleted file mode 100644
index 6cd83d920155..000000000000
--- a/Documentation/devicetree/bindings/regulator/samsung,s5m8767.txt
+++ /dev/null
@@ -1,140 +0,0 @@
-Binding for Samsung S5M8767 regulator block
-===========================================
-
-This is a part of device tree bindings for S5M family multi-function devices.
-More information can be found in bindings/mfd/sec-core.txt file.
-
-The S5M8767 device provide buck and LDO regulators.
-
-To register these with regulator framework instantiate under main device node
-a sub-node named "regulators" with more sub-nodes for each regulator using the
-common regulator binding documented in:
- - Documentation/devicetree/bindings/regulator/regulator.txt
-
-
-Required properties of the main device node (the parent!):
- - s5m8767,pmic-buck-ds-gpios: GPIO specifiers for three host gpio's used
-   for selecting GPIO DVS lines. It is one-to-one mapped to dvs gpio lines.
-
- [1] If either of the 's5m8767,pmic-buck[2/3/4]-uses-gpio-dvs' optional
-     property is specified, then all the eight voltage values for the
-     's5m8767,pmic-buck[2/3/4]-dvs-voltage' should be specified.
-
-Optional properties of the main device node (the parent!):
- - s5m8767,pmic-buck2-dvs-voltage: A set of 8 voltage values in micro-volt (uV)
-   units for buck2 when changing voltage using gpio dvs. Refer to [1] below
-   for additional information.
-
- - s5m8767,pmic-buck3-dvs-voltage: A set of 8 voltage values in micro-volt (uV)
-   units for buck3 when changing voltage using gpio dvs. Refer to [1] below
-   for additional information.
-
- - s5m8767,pmic-buck4-dvs-voltage: A set of 8 voltage values in micro-volt (uV)
-   units for buck4 when changing voltage using gpio dvs. Refer to [1] below
-   for additional information.
-
- - s5m8767,pmic-buck2-uses-gpio-dvs: 'buck2' can be controlled by gpio dvs.
- - s5m8767,pmic-buck3-uses-gpio-dvs: 'buck3' can be controlled by gpio dvs.
- - s5m8767,pmic-buck4-uses-gpio-dvs: 'buck4' can be controlled by gpio dvs.
-
-Additional properties required if either of the optional properties are used:
-
- - s5m8767,pmic-buck-default-dvs-idx: Default voltage setting selected from
-   the possible 8 options selectable by the dvs gpios. The value of this
-   property should be between 0 and 7. If not specified or if out of range, the
-   default value of this property is set to 0.
-
- - s5m8767,pmic-buck-dvs-gpios: GPIO specifiers for three host gpio's used
-   for dvs. The format of the gpio specifier depends in the gpio controller.
-
-
-Names of regulators supported by S5M8767 device:
-	- LDOn
-		  - valid values for n are 1 to 28
-		  - Example: LDO1, LDO2, LDO28
-	- BUCKn
-		  - valid values for n are 1 to 9.
-		  - Example: BUCK1, BUCK2, BUCK9
-Note: The 'n' in LDOn and BUCKn represents the LDO or BUCK number
-as per the datasheet of device.
-
-
-Optional properties of the nodes under "regulators" sub-node:
- - op_mode: describes the different operating modes of the LDO's with
-            power mode change in SOC. The different possible values are,
-             0 - always off mode
-             1 - on in normal mode
-             2 - low power mode
-             3 - suspend mode
- - s5m8767,pmic-ext-control-gpios: (optional) GPIO specifier for one
-                                   GPIO controlling this regulator
-                                   (enable/disable); This is valid only
-                                   for buck9.
-
-Example:
-
-	s5m8767_pmic@66 {
-		compatible = "samsung,s5m8767-pmic";
-		reg = <0x66>;
-
-		s5m8767,pmic-buck2-uses-gpio-dvs;
-		s5m8767,pmic-buck3-uses-gpio-dvs;
-		s5m8767,pmic-buck4-uses-gpio-dvs;
-
-		s5m8767,pmic-buck-default-dvs-idx = <0>;
-
-		s5m8767,pmic-buck-dvs-gpios = <&gpx0 0 0>, /* DVS1 */
-						 <&gpx0 1 0>, /* DVS2 */
-						 <&gpx0 2 0>; /* DVS3 */
-
-		s5m8767,pmic-buck-ds-gpios = <&gpx2 3 0>, /* SET1 */
-						<&gpx2 4 0>, /* SET2 */
-						<&gpx2 5 0>; /* SET3 */
-
-		s5m8767,pmic-buck2-dvs-voltage = <1350000>, <1300000>,
-						 <1250000>, <1200000>,
-						 <1150000>, <1100000>,
-						 <1000000>, <950000>;
-
-		s5m8767,pmic-buck3-dvs-voltage = <1100000>, <1100000>,
-						 <1100000>, <1100000>,
-						 <1000000>, <1000000>,
-						 <1000000>, <1000000>;
-
-		s5m8767,pmic-buck4-dvs-voltage = <1200000>, <1200000>,
-						 <1200000>, <1200000>,
-						 <1200000>, <1200000>,
-						 <1200000>, <1200000>;
-
-		regulators {
-			ldo1_reg: LDO1 {
-				regulator-name = "VDD_ABB_3.3V";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				op_mode = <1>; /* Normal Mode */
-			};
-
-			ldo2_reg: LDO2 {
-				regulator-name = "VDD_ALIVE_1.1V";
-				regulator-min-microvolt = <1100000>;
-				regulator-max-microvolt = <1100000>;
-				regulator-always-on;
-			};
-
-			buck1_reg: BUCK1 {
-				regulator-name = "VDD_MIF_1.2V";
-				regulator-min-microvolt = <950000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			vemmc_reg: BUCK9 {
-				regulator-name = "VMEM_VDD_2.8V";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-				op_mode = <3>; /* Standby Mode */
-				s5m8767,pmic-ext-control-gpios = <&gpk0 2 0>;
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/regulator/samsung,s5m8767.yaml b/Documentation/devicetree/bindings/regulator/samsung,s5m8767.yaml
new file mode 100644
index 000000000000..80a63d47790a
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/samsung,s5m8767.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/samsung,s5m8767.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S5M8767 Power Management IC regulators
+
+maintainers:
+  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+
+description: |
+  This is a part of device tree bindings for S2M and S5M family of Power
+  Management IC (PMIC).
+
+  The S5M8767 provides buck and LDO regulators.
+
+  See also Documentation/devicetree/bindings/mfd/samsung,s5m8767.yaml for
+  additional information and example.
+
+patternProperties:
+  # 28 LDOs
+  "^LDO([1-9]|1[0-9]|2[0-8])$":
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    description:
+      Properties for single LDO regulator.
+
+    properties:
+      op_mode:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2, 3]
+        default: 1
+        description: |
+          Describes the different operating modes of the LDO's with power mode
+          change in SOC. The different possible values are:
+            0 - always off mode
+            1 - on in normal mode
+            2 - low power mode
+            3 - suspend mode
+
+    required:
+      - regulator-name
+
+  # 8 bucks
+  "^BUCK[1-8]$":
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    description:
+      Properties for single BUCK regulator.
+
+    required:
+      - regulator-name
+
+  # 9 buck
+  "^BUCK9$":
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    description:
+      Properties for single BUCK regulator.
+
+    properties:
+      s5m8767,pmic-ext-control-gpios:
+        maxItems: 1
+        description: |
+          GPIO specifier for one GPIO controlling this regulator on/off.
+
+    required:
+      - regulator-name
+
+additionalProperties: false
diff --git a/MAINTAINERS b/MAINTAINERS
index ac83c22c67d6..7967f735b2e7 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -16602,7 +16602,7 @@ S:	Supported
 F:	Documentation/devicetree/bindings/clock/samsung,s2mps11.yaml
 F:	Documentation/devicetree/bindings/mfd/samsung,sec-core.txt
 F:	Documentation/devicetree/bindings/regulator/samsung,s2m*.yaml
-F:	Documentation/devicetree/bindings/regulator/samsung,s5m*.txt
+F:	Documentation/devicetree/bindings/regulator/samsung,s5m*.yaml
 F:	drivers/clk/clk-s2mps11.c
 F:	drivers/mfd/sec*.c
 F:	drivers/regulator/s2m*.c
-- 
2.30.2