From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
To: Mauro Carvalho Chehab <mchehab@kernel.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Alim Akhtar <alim.akhtar@samsung.com>,
linux-media@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Subject: [PATCH 1/3] media: dt-bindings: i2c: samsung,s5k6a3: convert to dtschema
Date: Sat, 11 Feb 2023 14:47:29 +0100 [thread overview]
Message-ID: <20230211134731.85957-1-krzysztof.kozlowski@linaro.org> (raw)
Convert the Samsung S5K6A3(YX) raw image sensor bindings to DT schema.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
.../bindings/media/i2c/samsung,s5k6a3.yaml | 98 +++++++++++++++++++
.../bindings/media/samsung-s5k6a3.txt | 33 -------
2 files changed, 98 insertions(+), 33 deletions(-)
create mode 100644 Documentation/devicetree/bindings/media/i2c/samsung,s5k6a3.yaml
delete mode 100644 Documentation/devicetree/bindings/media/samsung-s5k6a3.txt
diff --git a/Documentation/devicetree/bindings/media/i2c/samsung,s5k6a3.yaml b/Documentation/devicetree/bindings/media/i2c/samsung,s5k6a3.yaml
new file mode 100644
index 000000000000..7e83a94124b5
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/samsung,s5k6a3.yaml
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/samsung,s5k6a3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S5K6A3(YX) raw image sensor
+
+maintainers:
+ - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description:
+ S5K6A3(YX) is a raw image sensor with MIPI CSI-2 and CCP2 image data
+ interfaces and CCI (I2C compatible) control bus.
+
+properties:
+ compatible:
+ const: samsung,s5k6a3
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ items:
+ - const: extclk
+
+ clock-frequency:
+ default: 24000000
+ description: extclk clock frequency
+
+ gpios:
+ maxItems: 1
+ description: GPIO connected to the RESET pin
+
+ afvdd-supply:
+ description: AF (actuator) voltage supply
+
+ svdda-supply:
+ description: Core voltage supply
+
+ svddio-supply:
+ description: I/O voltage supply
+
+ port:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ additionalProperties: false
+
+ properties:
+ endpoint:
+ $ref: /schemas/media/video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ data-lanes:
+ items:
+ - const: 1
+
+required:
+ - compatible
+ - clocks
+ - clock-names
+ - gpios
+ - afvdd-supply
+ - svdda-supply
+ - svddio-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sensor@10 {
+ compatible = "samsung,s5k6a3";
+ reg = <0x10>;
+ clock-frequency = <24000000>;
+ clocks = <&camera 1>;
+ clock-names = "extclk";
+ gpios = <&gpm1 6 GPIO_ACTIVE_LOW>;
+ afvdd-supply = <&ldo19_reg>;
+ svdda-supply = <&cam_io_reg>;
+ svddio-supply = <&ldo19_reg>;
+
+ port {
+ endpoint {
+ remote-endpoint = <&csis1_ep>;
+ data-lanes = <1>;
+ };
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/media/samsung-s5k6a3.txt b/Documentation/devicetree/bindings/media/samsung-s5k6a3.txt
deleted file mode 100644
index cce01e82f3e3..000000000000
--- a/Documentation/devicetree/bindings/media/samsung-s5k6a3.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-Samsung S5K6A3(YX) raw image sensor
----------------------------------
-
-S5K6A3(YX) is a raw image sensor with MIPI CSI-2 and CCP2 image data interfaces
-and CCI (I2C compatible) control bus.
-
-Required properties:
-
-- compatible : "samsung,s5k6a3";
-- reg : I2C slave address of the sensor;
-- svdda-supply : core voltage supply;
-- svddio-supply : I/O voltage supply;
-- afvdd-supply : AF (actuator) voltage supply;
-- gpios : specifier of a GPIO connected to the RESET pin;
-- clocks : should contain list of phandle and clock specifier pairs
- according to common clock bindings for the clocks described
- in the clock-names property;
-- clock-names : should contain "extclk" entry for the sensor's EXTCLK clock;
-
-Optional properties:
-
-- clock-frequency : the frequency at which the "extclk" clock should be
- configured to operate, in Hz; if this property is not
- specified default 24 MHz value will be used.
-
-The common video interfaces bindings (see video-interfaces.txt) should be
-used to specify link to the image data receiver. The S5K6A3(YX) device
-node should contain one 'port' child node with an 'endpoint' subnode.
-
-Following properties are valid for the endpoint node:
-
-- data-lanes : (optional) specifies MIPI CSI-2 data lanes as covered in
- video-interfaces.txt. The sensor supports only one data lane.
--
2.34.1
next reply other threads:[~2023-02-11 13:47 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-02-11 13:47 Krzysztof Kozlowski [this message]
2023-02-11 13:47 ` [PATCH 2/3] media: dt-bindings: i2c: samsung,s5k5baf: convert to dtschema Krzysztof Kozlowski
2023-02-11 13:47 ` [PATCH 3/3] ARM: dts: exynos: drop unused samsung,camclk-out property in Midas Krzysztof Kozlowski
2023-03-06 11:39 ` (subset) " Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230211134731.85957-1-krzysztof.kozlowski@linaro.org \
--to=krzysztof.kozlowski@linaro.org \
--cc=alim.akhtar@samsung.com \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).