From: Marek Szyprowski <m.szyprowski@samsung.com>
To: Dmitry Torokhov <dmitry.torokhov@gmail.com>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
Alim Akhtar <alim.akhtar@samsung.com>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Linus Walleij <linus.walleij@linaro.org>
Cc: linux-media@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 2/2] media: i2c: s5k6a3: switch to using gpiod API
Date: Mon, 19 Sep 2022 16:31:18 +0200 [thread overview]
Message-ID: <4e60f9aa-b2ab-65bc-2c93-cd0324fccb3a@samsung.com> (raw)
In-Reply-To: <20220913164104.203957-2-dmitry.torokhov@gmail.com>
Hi,
On 13.09.2022 18:41, Dmitry Torokhov wrote:
> This patch switches the driver away from legacy gpio/of_gpio API to
> gpiod API, and removes one of the last uses of of_get_gpio_flags().
>
> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Thanks!
> ---
> drivers/media/i2c/s5k6a3.c | 30 +++++++++++-------------------
> 1 file changed, 11 insertions(+), 19 deletions(-)
>
> diff --git a/drivers/media/i2c/s5k6a3.c b/drivers/media/i2c/s5k6a3.c
> index a4efd6d10b43..ef6673b10580 100644
> --- a/drivers/media/i2c/s5k6a3.c
> +++ b/drivers/media/i2c/s5k6a3.c
> @@ -9,12 +9,12 @@
> #include <linux/clk.h>
> #include <linux/delay.h>
> #include <linux/device.h>
> +#include <linux/err.h>
> #include <linux/errno.h>
> -#include <linux/gpio.h>
> +#include <linux/gpio/consumer.h>
> #include <linux/i2c.h>
> #include <linux/kernel.h>
> #include <linux/module.h>
> -#include <linux/of_gpio.h>
> #include <linux/pm_runtime.h>
> #include <linux/regulator/consumer.h>
> #include <linux/slab.h>
> @@ -59,7 +59,7 @@ struct s5k6a3 {
> struct v4l2_subdev subdev;
> struct media_pad pad;
> struct regulator_bulk_data supplies[S5K6A3_NUM_SUPPLIES];
> - int gpio_reset;
> + struct gpio_desc *gpio_reset;
> struct mutex lock;
> struct v4l2_mbus_framefmt format;
> struct clk *clock;
> @@ -216,11 +216,11 @@ static int __s5k6a3_power_on(struct s5k6a3 *sensor)
> goto error_clk;
> }
>
> - gpio_set_value(sensor->gpio_reset, 1);
> + gpiod_set_value_cansleep(sensor->gpio_reset, 0);
> usleep_range(600, 800);
> - gpio_set_value(sensor->gpio_reset, 0);
> + gpiod_set_value_cansleep(sensor->gpio_reset, 1);
> usleep_range(600, 800);
> - gpio_set_value(sensor->gpio_reset, 1);
> + gpiod_set_value_cansleep(sensor->gpio_reset, 0);
>
> /* Delay needed for the sensor initialization */
> msleep(20);
> @@ -240,7 +240,7 @@ static int __s5k6a3_power_off(struct s5k6a3 *sensor)
> {
> int i;
>
> - gpio_set_value(sensor->gpio_reset, 0);
> + gpiod_set_value_cansleep(sensor->gpio_reset, 1);
>
> for (i = S5K6A3_NUM_SUPPLIES - 1; i >= 0; i--)
> regulator_disable(sensor->supplies[i].consumer);
> @@ -285,32 +285,24 @@ static int s5k6a3_probe(struct i2c_client *client)
> struct device *dev = &client->dev;
> struct s5k6a3 *sensor;
> struct v4l2_subdev *sd;
> - int gpio, i, ret;
> + int i, ret;
>
> sensor = devm_kzalloc(dev, sizeof(*sensor), GFP_KERNEL);
> if (!sensor)
> return -ENOMEM;
>
> mutex_init(&sensor->lock);
> - sensor->gpio_reset = -EINVAL;
> - sensor->clock = ERR_PTR(-EINVAL);
> sensor->dev = dev;
>
> sensor->clock = devm_clk_get(sensor->dev, S5K6A3_CLK_NAME);
> if (IS_ERR(sensor->clock))
> return PTR_ERR(sensor->clock);
>
> - gpio = of_get_gpio_flags(dev->of_node, 0, NULL);
> - if (!gpio_is_valid(gpio))
> - return gpio;
> -
> - ret = devm_gpio_request_one(dev, gpio, GPIOF_OUT_INIT_LOW,
> - S5K6A3_DRV_NAME);
> - if (ret < 0)
> + sensor->gpio_reset = devm_gpiod_get(dev, NULL, GPIOD_OUT_HIGH);
> + ret = PTR_ERR_OR_ZERO(sensor->gpio_reset);
> + if (ret)
> return ret;
>
> - sensor->gpio_reset = gpio;
> -
> if (of_property_read_u32(dev->of_node, "clock-frequency",
> &sensor->clock_frequency)) {
> sensor->clock_frequency = S5K6A3_DEFAULT_CLK_FREQ;
Best regards
--
Marek Szyprowski, PhD
Samsung R&D Institute Poland
next prev parent reply other threads:[~2022-09-19 14:31 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-09-13 16:41 [PATCH 1/2] ARM: dts: exynos: correct s5k6a3 reset polarity on Midas family Dmitry Torokhov
2022-09-13 16:41 ` [PATCH 2/2] media: i2c: s5k6a3: switch to using gpiod API Dmitry Torokhov
2022-09-14 12:58 ` Linus Walleij
2022-09-19 14:31 ` Marek Szyprowski [this message]
2022-09-14 12:57 ` [PATCH 1/2] ARM: dts: exynos: correct s5k6a3 reset polarity on Midas family Linus Walleij
2022-09-19 8:26 ` (subset) " Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4e60f9aa-b2ab-65bc-2c93-cd0324fccb3a@samsung.com \
--to=m.szyprowski@samsung.com \
--cc=alim.akhtar@samsung.com \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.torokhov@gmail.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=mchehab@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).