linux-samsung-soc.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sam Protsenko <semen.protsenko@linaro.org>
To: Chanwoo Choi <cwchoi00@gmail.com>,
	Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>,
	Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: "Paweł Chmiel" <pawel.mikolaj.chmiel@gmail.com>,
	"Chanwoo Choi" <cw00.choi@samsung.com>,
	"Tomasz Figa" <tomasz.figa@gmail.com>,
	"Rob Herring" <robh+dt@kernel.org>,
	"Stephen Boyd" <sboyd@kernel.org>,
	"Michael Turquette" <mturquette@baylibre.com>,
	"Ryu Euiyoul" <ryu.real@samsung.com>,
	"Tom Gall" <tom.gall@linaro.org>,
	"Sumit Semwal" <sumit.semwal@linaro.org>,
	"John Stultz" <john.stultz@linaro.org>,
	"Amit Pundir" <amit.pundir@linaro.org>,
	devicetree <devicetree@vger.kernel.org>,
	"linux-arm Mailing List" <linux-arm-kernel@lists.infradead.org>,
	linux-clk <linux-clk@vger.kernel.org>,
	"Linux Kernel Mailing List" <linux-kernel@vger.kernel.org>,
	"Linux Samsung SOC" <linux-samsung-soc@vger.kernel.org>
Subject: Re: [PATCH 6/6] clk: samsung: Introduce Exynos850 clock driver
Date: Thu, 16 Sep 2021 01:00:51 +0300	[thread overview]
Message-ID: <CAPLW+4k8ZihQtnpYGULcS1uOP+9tvFi_yo27GadP3aa8KNC7aQ@mail.gmail.com> (raw)
In-Reply-To: <1428bfc4-520f-9af3-5255-b17308881243@gmail.com>

On Wed, 15 Sept 2021 at 21:05, Chanwoo Choi <cwchoi00@gmail.com> wrote:
>
> Hi Sam,
>
> On 21. 9. 15. 오전 12:56, Sam Protsenko wrote:
> > This is the initial implementation adding only basic clocks like UART,
> > MMC, I2C and corresponding parent clocks. Design is influenced by
> > Exynos7 and Exynos5433 clock drivers.
> >
> > Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
> > ---
> >   drivers/clk/samsung/Makefile        |   1 +
> >   drivers/clk/samsung/clk-exynos850.c | 700 ++++++++++++++++++++++++++++
> >   2 files changed, 701 insertions(+)
> >   create mode 100644 drivers/clk/samsung/clk-exynos850.c
> >
> > diff --git a/drivers/clk/samsung/Makefile b/drivers/clk/samsung/Makefile
> > index 028b2e27a37e..c46cf11e4d0b 100644
> > --- a/drivers/clk/samsung/Makefile
> > +++ b/drivers/clk/samsung/Makefile
> > @@ -17,6 +17,7 @@ obj-$(CONFIG_EXYNOS_ARM64_COMMON_CLK)       += clk-exynos5433.o
> >   obj-$(CONFIG_EXYNOS_AUDSS_CLK_CON) += clk-exynos-audss.o
> >   obj-$(CONFIG_EXYNOS_CLKOUT) += clk-exynos-clkout.o
> >   obj-$(CONFIG_EXYNOS_ARM64_COMMON_CLK)       += clk-exynos7.o
> > +obj-$(CONFIG_EXYNOS_ARM64_COMMON_CLK)        += clk-exynos850.o
> >   obj-$(CONFIG_S3C2410_COMMON_CLK)+= clk-s3c2410.o
> >   obj-$(CONFIG_S3C2410_COMMON_DCLK)+= clk-s3c2410-dclk.o
> >   obj-$(CONFIG_S3C2412_COMMON_CLK)+= clk-s3c2412.o
> > diff --git a/drivers/clk/samsung/clk-exynos850.c b/drivers/clk/samsung/clk-exynos850.c
> > new file mode 100644
> > index 000000000000..1028caa2102e
> > --- /dev/null
> > +++ b/drivers/clk/samsung/clk-exynos850.c
> > @@ -0,0 +1,700 @@
> > +// SPDX-License-Identifier: GPL-2.0-only
> > +/*
> > + * Copyright (C) 2021 Linaro Ltd.
> > + * Author: Sam Protsenko <semen.protsenko@linaro.org>
> > + *
> > + * Common Clock Framework support for Exynos850 SoC.
> > + */
> > +
> > +#include <linux/clk-provider.h>
> > +#include <linux/of.h>
> > +#include <linux/of_address.h>
> > +
> > +#include <dt-bindings/clock/exynos850.h>
> > +
> > +#include "clk.h"
> > +
> > +/* Gate register bits */
> > +#define GATE_MANUAL          BIT(20)
> > +#define GATE_ENABLE_HWACG    BIT(28)
> > +
> > +/* Gate register offsets range */
> > +#define GATE_OFF_START               0x2000
> > +#define GATE_OFF_END         0x2fff
> > +
> > +/**
> > + * exynos850_init_clocks - Set clocks initial configuration
> > + * @np:                      CMU device tree node with "reg" property (CMU addr)
> > + * @reg_offs:                Register offsets array for clocks to init
> > + * @reg_offs_len:    Number of register offsets in reg_offs array
> > + *
> > + * Set manual control mode for all gate clocks.
> > + */
> > +static void __init exynos850_init_clocks(struct device_node *np,
> > +             const unsigned long *reg_offs, size_t reg_offs_len)
> > +{
> > +     const __be32 *regaddr_p;
> > +     u64 regaddr;
> > +     u32 base;
> > +     size_t i;
> > +
> > +     /* Get the base address ("reg" property in dts) */
> > +     regaddr_p = of_get_address(np, 0, NULL, NULL);
> > +     if (!regaddr_p)
> > +             panic("%s: failed to get reg regaddr\n", __func__);
> > +
> > +     regaddr = of_translate_address(np, regaddr_p);
> > +     if (regaddr == OF_BAD_ADDR || !regaddr)
> > +             panic("%s: bad reg regaddr\n", __func__);
> > +
> > +     base = (u32)regaddr;
> > +
> > +     for (i = 0; i < reg_offs_len; ++i) {
> > +             void __iomem *reg;
> > +             u32 val;
> > +
> > +             /* Modify only gate clock registers */
> > +             if (reg_offs[i] < GATE_OFF_START || reg_offs[i] > GATE_OFF_END)
> > +                     continue; > +
> > +             reg = ioremap(base + reg_offs[i], 4);
> > +             val = ioread32(reg);
> > +             val |= GATE_MANUAL;
> > +             val &= ~GATE_ENABLE_HWACG;
> > +             iowrite32(val, reg);
> > +             iounmap(reg);
>
> I understand your intention for disabling HWACG.
> But, it is not good to execute ioreamp/iounmap for each clock gate
> register. I think that we need to consider the more pretty method
> to initialize the clock register before clock registration.
>
> [snip]
>

Hi guys,

Thanks for the quick review! I'll address all your comments once I get
back from vacation (in two weeks), and will send v2.

> --
> Best Regards,
> Samsung Electronics
> Chanwoo Choi

      reply	other threads:[~2021-09-15 22:01 UTC|newest]

Thread overview: 38+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-09-14 15:56 [PATCH 0/6] clk: samsung: Introduce Exynos850 SoC " Sam Protsenko
2021-09-14 15:56 ` [PATCH 1/6] clk: samsung: Enable bus clock on init Sam Protsenko
2021-09-15  8:21   ` Krzysztof Kozlowski
2021-10-06 10:46     ` Sam Protsenko
2021-10-06 12:38       ` Krzysztof Kozlowski
2021-10-06 13:29         ` Sam Protsenko
2021-10-08  6:50           ` Krzysztof Kozlowski
2021-09-15 12:51   ` Sylwester Nawrocki
2021-10-06 11:18     ` Sam Protsenko
2021-10-06 12:45       ` Krzysztof Kozlowski
2021-10-09 18:49       ` Sylwester Nawrocki
2021-09-14 15:56 ` [PATCH 2/6] clk: samsung: clk-pll: Implement pll0822x PLL type Sam Protsenko
2021-09-15  8:24   ` Krzysztof Kozlowski
2021-09-15 15:59   ` Chanwoo Choi
2021-09-14 15:56 ` [PATCH 3/6] clk: samsung: clk-pll: Implement pll0831x " Sam Protsenko
2021-09-15  8:26   ` Krzysztof Kozlowski
2021-09-15 16:11   ` Chanwoo Choi
2021-09-14 15:56 ` [PATCH 4/6] dt-bindings: clock: Add bindings definitions for Exynos850 CMU Sam Protsenko
2021-09-15  8:27   ` Krzysztof Kozlowski
2021-09-15 16:37   ` Chanwoo Choi
2021-10-05 10:28     ` Sam Protsenko
2021-10-06 10:49       ` Krzysztof Kozlowski
2021-10-06 13:31         ` Sam Protsenko
2021-09-21 21:10   ` Rob Herring
2021-09-14 15:56 ` [PATCH 5/6] dt-bindings: clock: Document Exynos850 CMU bindings Sam Protsenko
2021-09-14 21:35   ` Rob Herring
2021-09-15  8:28   ` Krzysztof Kozlowski
2021-10-05 11:48     ` Sam Protsenko
2021-09-15 16:47   ` Chanwoo Choi
2021-09-14 15:56 ` [PATCH 6/6] clk: samsung: Introduce Exynos850 clock driver Sam Protsenko
2021-09-15  8:59   ` Krzysztof Kozlowski
2021-10-05 11:29     ` Sam Protsenko
2021-10-06 12:50       ` Krzysztof Kozlowski
2021-09-15 13:07   ` Sylwester Nawrocki
2021-10-05 11:36     ` Sam Protsenko
2021-10-06 12:46       ` Krzysztof Kozlowski
2021-09-15 18:04   ` Chanwoo Choi
2021-09-15 22:00     ` Sam Protsenko [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CAPLW+4k8ZihQtnpYGULcS1uOP+9tvFi_yo27GadP3aa8KNC7aQ@mail.gmail.com \
    --to=semen.protsenko@linaro.org \
    --cc=amit.pundir@linaro.org \
    --cc=cw00.choi@samsung.com \
    --cc=cwchoi00@gmail.com \
    --cc=devicetree@vger.kernel.org \
    --cc=john.stultz@linaro.org \
    --cc=krzysztof.kozlowski@canonical.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=pawel.mikolaj.chmiel@gmail.com \
    --cc=robh+dt@kernel.org \
    --cc=ryu.real@samsung.com \
    --cc=s.nawrocki@samsung.com \
    --cc=sboyd@kernel.org \
    --cc=sumit.semwal@linaro.org \
    --cc=tom.gall@linaro.org \
    --cc=tomasz.figa@gmail.com \
    --subject='Re: [PATCH 6/6] clk: samsung: Introduce Exynos850 clock driver' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).