linux-samsung-soc.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sam Protsenko <semen.protsenko@linaro.org>
To: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Cc: "Sylwester Nawrocki" <s.nawrocki@samsung.com>,
	"Chanwoo Choi" <cw00.choi@samsung.com>,
	"Linus Walleij" <linus.walleij@linaro.org>,
	"Tomasz Figa" <tomasz.figa@gmail.com>,
	"Paweł Chmiel" <pawel.mikolaj.chmiel@gmail.com>,
	"Marc Zyngier" <maz@kernel.org>,
	"Rob Herring" <robh+dt@kernel.org>,
	"Stephen Boyd" <sboyd@kernel.org>,
	"Michael Turquette" <mturquette@baylibre.com>,
	"Jiri Slaby" <jirislaby@kernel.org>,
	"Greg Kroah-Hartman" <gregkh@linuxfoundation.org>,
	"Charles Keepax" <ckeepax@opensource.wolfsonmicro.com>,
	"Ryu Euiyoul" <ryu.real@samsung.com>,
	"Tom Gall" <tom.gall@linaro.org>,
	"Sumit Semwal" <sumit.semwal@linaro.org>,
	"John Stultz" <john.stultz@linaro.org>,
	"Amit Pundir" <amit.pundir@linaro.org>,
	devicetree <devicetree@vger.kernel.org>,
	"linux-arm Mailing List" <linux-arm-kernel@lists.infradead.org>,
	linux-clk <linux-clk@vger.kernel.org>,
	"open list:GPIO SUBSYSTEM" <linux-gpio@vger.kernel.org>,
	"Linux Kernel Mailing List" <linux-kernel@vger.kernel.org>,
	"Linux Samsung SOC" <linux-samsung-soc@vger.kernel.org>,
	"open list:SERIAL DRIVERS" <linux-serial@vger.kernel.org>
Subject: Re: [PATCH v2 2/8] pinctrl: samsung: Add Exynos850 SoC specific data
Date: Mon, 9 Aug 2021 21:18:29 +0300	[thread overview]
Message-ID: <CAPLW+4mfTMWWssW8+nTt8Yp3dN5=WJpji=o_rRYYr6+kx_dctA@mail.gmail.com> (raw)
In-Reply-To: <407ee65f-6004-5173-9fcc-99023c85db4e@canonical.com>

On Mon, 9 Aug 2021 at 13:43, Krzysztof Kozlowski
<krzysztof.kozlowski@canonical.com> wrote:
>
> On 06/08/2021 17:21, Sam Protsenko wrote:
> > Add Samsung Exynos850 SoC specific data to enable pinctrl support for
> > all platforms based on Exynos850.
> >
> > Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
> > ---
> > Changes in v2:
> >   - Removed .suspend/.resume callbacks, as retention registers are not
> >     implemented yet for Exynos850
> >   - Removed .eint_gpio_init for AUD domain, as there are no external
> >     interrupts available for that domain
> >
> >  .../pinctrl/samsung/pinctrl-exynos-arm64.c    | 116 ++++++++++++++++++
> >  drivers/pinctrl/samsung/pinctrl-exynos.h      |  29 +++++
> >  drivers/pinctrl/samsung/pinctrl-samsung.c     |   2 +
> >  drivers/pinctrl/samsung/pinctrl-samsung.h     |   1 +
> >  4 files changed, 148 insertions(+)
> >
> > diff --git a/drivers/pinctrl/samsung/pinctrl-exynos-arm64.c b/drivers/pinctrl/samsung/pinctrl-exynos-arm64.c
> > index b6e56422a700..3157bdf0233c 100644
> > --- a/drivers/pinctrl/samsung/pinctrl-exynos-arm64.c
> > +++ b/drivers/pinctrl/samsung/pinctrl-exynos-arm64.c
> > @@ -40,6 +40,24 @@ static const struct samsung_pin_bank_type exynos5433_bank_type_alive = {
> >       .reg_offset = { 0x00, 0x04, 0x08, 0x0c, },
> >  };
> >
> > +/*
> > + * Bank type for non-alive type. Bit fields:
> > + * CON: 4, DAT: 1, PUD: 4, DRV: 4, CONPDN: 2, PUDPDN: 4
> > + */
> > +static struct samsung_pin_bank_type exynos850_bank_type_off  = {
> > +     .fld_width = { 4, 1, 4, 4, 2, 4, },
> > +     .reg_offset = { 0x00, 0x04, 0x08, 0x0c, 0x10, 0x14, },
> > +};
> > +
> > +/*
> > + * Bank type for alive type. Bit fields:
> > + * CON: 4, DAT: 1, PUD: 4, DRV: 4
> > + */
> > +static struct samsung_pin_bank_type exynos850_bank_type_alive = {
>
> I missed that part last time - this and one before should be const.
>
> > +     .fld_width = { 4, 1, 4, 4, },
> > +     .reg_offset = { 0x00, 0x04, 0x08, 0x0c, },
> > +};
> > +
> >  /* Pad retention control code for accessing PMU regmap */
> >  static atomic_t exynos_shared_retention_refcnt;
> >
> > @@ -422,3 +440,101 @@ const struct samsung_pinctrl_of_match_data exynos7_of_data __initconst = {
> >       .ctrl           = exynos7_pin_ctrl,
> >       .num_ctrl       = ARRAY_SIZE(exynos7_pin_ctrl),
> >  };
> > +
> > +/* pin banks of exynos850 pin-controller 0 (ALIVE) */
> > +static struct samsung_pin_bank_data exynos850_pin_banks0[] = {
>
> All these as well - initconst - unless they are somehow different than
> rest of such structures?
>
> > +     /* Must start with EINTG banks, ordered by EINT group number. */
> > +     EXYNOS9_PIN_BANK_EINTW(8, 0x000, "gpa0", 0x00),
> > +     EXYNOS9_PIN_BANK_EINTW(8, 0x020, "gpa1", 0x04),
> > +     EXYNOS9_PIN_BANK_EINTW(8, 0x040, "gpa2", 0x08),
> > +     EXYNOS9_PIN_BANK_EINTW(8, 0x060, "gpa3", 0x0c),
> > +     EXYNOS9_PIN_BANK_EINTW(4, 0x080, "gpa4", 0x10),
> > +     EXYNOS9_PIN_BANK_EINTN(3, 0x0A0, "gpq0"),
> > +};
> > +
> > +/* pin banks of exynos850 pin-controller 1 (CMGP) */
> > +static struct samsung_pin_bank_data exynos850_pin_banks1[] = {
> > +     /* Must start with EINTG banks, ordered by EINT group number. */
> > +     EXYNOS9_PIN_BANK_EINTW(1, 0x000, "gpm0", 0x00),
> > +     EXYNOS9_PIN_BANK_EINTW(1, 0x020, "gpm1", 0x04),
> > +     EXYNOS9_PIN_BANK_EINTW(1, 0x040, "gpm2", 0x08),
> > +     EXYNOS9_PIN_BANK_EINTW(1, 0x060, "gpm3", 0x0C),
> > +     EXYNOS9_PIN_BANK_EINTW(1, 0x080, "gpm4", 0x10),
> > +     EXYNOS9_PIN_BANK_EINTW(1, 0x0A0, "gpm5", 0x14),
> > +     EXYNOS9_PIN_BANK_EINTW(1, 0x0C0, "gpm6", 0x18),
> > +     EXYNOS9_PIN_BANK_EINTW(1, 0x0E0, "gpm7", 0x1C),
> > +};
> > +
> > +/* pin banks of exynos850 pin-controller 2 (AUD) */
> > +static struct samsung_pin_bank_data exynos850_pin_banks2[] = {
> > +     /* Must start with EINTG banks, ordered by EINT group number. */
> > +     EXYNOS9_PIN_BANK_EINTG(5, 0x000, "gpb0", 0x00),
> > +     EXYNOS9_PIN_BANK_EINTG(5, 0x020, "gpb1", 0x04),
> > +};
> > +
> > +/* pin banks of exynos850 pin-controller 3 (HSI) */
> > +static struct samsung_pin_bank_data exynos850_pin_banks3[] = {
> > +     /* Must start with EINTG banks, ordered by EINT group number. */
> > +     EXYNOS9_PIN_BANK_EINTG(6, 0x000, "gpf2", 0x00),
> > +};
> > +
> > +/* pin banks of exynos850 pin-controller 4 (CORE) */
> > +static struct samsung_pin_bank_data exynos850_pin_banks4[] = {
> > +     /* Must start with EINTG banks, ordered by EINT group number. */
> > +     EXYNOS9_PIN_BANK_EINTG(4, 0x000, "gpf0", 0x00),
> > +     EXYNOS9_PIN_BANK_EINTG(8, 0x020, "gpf1", 0x04),
> > +};
> > +
> > +/* pin banks of exynos850 pin-controller 5 (PERI) */
> > +static struct samsung_pin_bank_data exynos850_pin_banks5[] = {
> > +     /* Must start with EINTG banks, ordered by EINT group number. */
> > +     EXYNOS9_PIN_BANK_EINTG(2, 0x000, "gpg0", 0x00),
> > +     EXYNOS9_PIN_BANK_EINTG(6, 0x020, "gpp0", 0x04),
> > +     EXYNOS9_PIN_BANK_EINTG(4, 0x040, "gpp1", 0x08),
> > +     EXYNOS9_PIN_BANK_EINTG(4, 0x060, "gpp2", 0x0C),
> > +     EXYNOS9_PIN_BANK_EINTG(8, 0x080, "gpg1", 0x10),
> > +     EXYNOS9_PIN_BANK_EINTG(8, 0x0A0, "gpg2", 0x14),
> > +     EXYNOS9_PIN_BANK_EINTG(1, 0x0C0, "gpg3", 0x18),
> > +     EXYNOS9_PIN_BANK_EINTG(3, 0x0E0, "gpc0", 0x1C),
> > +     EXYNOS9_PIN_BANK_EINTG(6, 0x100, "gpc1", 0x20),
> > +};
> > +
> > +static const struct samsung_pin_ctrl exynos850_pin_ctrl[] __initconst = {
> > +     {
> > +             /* pin-controller instance 0 ALIVE data */
> > +             .pin_banks      = exynos850_pin_banks0,
> > +             .nr_banks       = ARRAY_SIZE(exynos850_pin_banks0),
> > +             .eint_gpio_init = exynos_eint_gpio_init,
> > +             .eint_wkup_init = exynos_eint_wkup_init,
> > +     }, {
> > +             /* pin-controller instance 1 CMGP data */
> > +             .pin_banks      = exynos850_pin_banks1,
> > +             .nr_banks       = ARRAY_SIZE(exynos850_pin_banks1),
> > +             .eint_gpio_init = exynos_eint_gpio_init,
> > +             .eint_wkup_init = exynos_eint_wkup_init,
> > +     }, {
> > +             /* pin-controller instance 2 AUD data */
> > +             .pin_banks      = exynos850_pin_banks2,
> > +             .nr_banks       = ARRAY_SIZE(exynos850_pin_banks2),
> > +     }, {
> > +             /* pin-controller instance 3 HSI data */
> > +             .pin_banks      = exynos850_pin_banks3,
> > +             .nr_banks       = ARRAY_SIZE(exynos850_pin_banks3),
> > +             .eint_gpio_init = exynos_eint_gpio_init,
> > +     }, {
> > +             /* pin-controller instance 4 CORE data */
> > +             .pin_banks      = exynos850_pin_banks4,
> > +             .nr_banks       = ARRAY_SIZE(exynos850_pin_banks4),
> > +             .eint_gpio_init = exynos_eint_gpio_init,
> > +     }, {
> > +             /* pin-controller instance 5 PERI data */
> > +             .pin_banks      = exynos850_pin_banks5,
> > +             .nr_banks       = ARRAY_SIZE(exynos850_pin_banks5),
> > +             .eint_gpio_init = exynos_eint_gpio_init,
> > +     },
> > +};
> > +
> > +const struct samsung_pinctrl_of_match_data exynos850_of_data __initconst = {
> > +     .ctrl           = exynos850_pin_ctrl,
> > +     .num_ctrl       = ARRAY_SIZE(exynos850_pin_ctrl),
> > +};
> > diff --git a/drivers/pinctrl/samsung/pinctrl-exynos.h b/drivers/pinctrl/samsung/pinctrl-exynos.h
> > index da1ec13697e7..595086f2d5dd 100644
> > --- a/drivers/pinctrl/samsung/pinctrl-exynos.h
> > +++ b/drivers/pinctrl/samsung/pinctrl-exynos.h
> > @@ -108,6 +108,35 @@
> >               .pctl_res_idx   = pctl_idx,                     \
> >       }                                                       \
> >
> > +#define EXYNOS9_PIN_BANK_EINTN(pins, reg, id)                        \
> > +     {                                                       \
> > +             .type           = &exynos850_bank_type_alive,   \
>
> Having the prefix EXYNOS9 is actually confusing because:
> 1. There is no Exynos9 support,
> 2. The type is exynos850.
>
> Let's keep it consistent, so 850 everywhere,
>

Sure. Will send v3 shortly with fixes for everything you mentioned.

> > +             .pctl_offset    = reg,                          \
> > +             .nr_pins        = pins,                         \
> > +             .eint_type      = EINT_TYPE_NONE,               \
> > +             .name           = id                            \
> > +     }
> > +
> > +#define EXYNOS9_PIN_BANK_EINTG(pins, reg, id, offs)          \
> > +     {                                                       \
> > +             .type           = &exynos850_bank_type_off,     \
> > +             .pctl_offset    = reg,                          \
> > +             .nr_pins        = pins,                         \
> > +             .eint_type      = EINT_TYPE_GPIO,               \
> > +             .eint_offset    = offs,                         \
> > +             .name           = id                            \
> > +     }
> > +
> > +#define EXYNOS9_PIN_BANK_EINTW(pins, reg, id, offs)          \
> > +     {                                                       \
> > +             .type           = &exynos850_bank_type_alive,   \
> > +             .pctl_offset    = reg,                          \
> > +             .nr_pins        = pins,                         \
> > +             .eint_type      = EINT_TYPE_WKUP,               \
> > +             .eint_offset    = offs,                         \
> > +             .name           = id                            \
> > +     }
> > +
>
> Best regards,
> Krzysztof

  reply	other threads:[~2021-08-09 18:18 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-06 15:21 [PATCH v2 0/8] Add minimal support for Exynos850 SoC Sam Protsenko
2021-08-06 15:21 ` [PATCH v2 1/8] dt-bindings: pinctrl: samsung: Add Exynos850 doc Sam Protsenko
2021-08-06 15:21 ` [PATCH v2 2/8] pinctrl: samsung: Add Exynos850 SoC specific data Sam Protsenko
2021-08-09 10:43   ` Krzysztof Kozlowski
2021-08-09 18:18     ` Sam Protsenko [this message]
2021-08-06 15:21 ` [PATCH v2 3/8] dt-bindings: serial: samsung: Add Exynos850 doc Sam Protsenko
2021-08-06 15:21 ` [PATCH v2 4/8] tty: serial: samsung: Init USI to keep clocks running Sam Protsenko
2021-08-09 10:45   ` Krzysztof Kozlowski
2021-08-06 15:21 ` [PATCH v2 5/8] tty: serial: samsung: Fix driver data macros style Sam Protsenko
2021-08-06 15:21 ` [PATCH v2 6/8] tty: serial: samsung: Add Exynos850 SoC data Sam Protsenko
2021-08-09 10:46   ` Krzysztof Kozlowski
2021-08-06 15:21 ` [PATCH v2 7/8] clk: samsung: Add Exynos850 clock driver stub Sam Protsenko
2021-08-09 10:55   ` Krzysztof Kozlowski
2021-08-09 18:51     ` Sam Protsenko
2021-08-09 11:22   ` Krzysztof Kozlowski
2021-08-09 19:48     ` Sam Protsenko
2021-08-10  7:55       ` Sylwester Nawrocki
2021-08-11 11:20         ` Sam Protsenko
2021-08-06 15:21 ` [PATCH v2 8/8] arm64: dts: exynos: Add Exynos850 SoC support Sam Protsenko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CAPLW+4mfTMWWssW8+nTt8Yp3dN5=WJpji=o_rRYYr6+kx_dctA@mail.gmail.com' \
    --to=semen.protsenko@linaro.org \
    --cc=amit.pundir@linaro.org \
    --cc=ckeepax@opensource.wolfsonmicro.com \
    --cc=cw00.choi@samsung.com \
    --cc=devicetree@vger.kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=jirislaby@kernel.org \
    --cc=john.stultz@linaro.org \
    --cc=krzysztof.kozlowski@canonical.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=linux-serial@vger.kernel.org \
    --cc=maz@kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=pawel.mikolaj.chmiel@gmail.com \
    --cc=robh+dt@kernel.org \
    --cc=ryu.real@samsung.com \
    --cc=s.nawrocki@samsung.com \
    --cc=sboyd@kernel.org \
    --cc=sumit.semwal@linaro.org \
    --cc=tom.gall@linaro.org \
    --cc=tomasz.figa@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).