From: John Garry <john.garry@huawei.com>
To: <jejb@linux.vnet.ibm.com>, <martin.petersen@oracle.com>
Cc: <linux-scsi@vger.kernel.org>, <linuxarm@huawei.com>,
<linux-kernel@vger.kernel.org>,
Xiang Chen <chenxiang66@hisilicon.com>,
"John Garry" <john.garry@huawei.com>
Subject: [PATCH 05/13] scsi: hisi_sas: Retry 3 times TMF IO for SAS disks when init device
Date: Fri, 6 Sep 2019 20:55:29 +0800 [thread overview]
Message-ID: <1567774537-20003-6-git-send-email-john.garry@huawei.com> (raw)
In-Reply-To: <1567774537-20003-1-git-send-email-john.garry@huawei.com>
From: Xiang Chen <chenxiang66@hisilicon.com>
When init device for SAS disks, it will send TMF IO to clear disks. At that
times TMF IO is broken by some operations such as injecting controller
reset from HW RAs event, the TMF IO will be timeout, and at last device
will be gone. Print is as followed:
hisi_sas_v3_hw 0000:74:02.0: dev[240:1] found
...
hisi_sas_v3_hw 0000:74:02.0: controller resetting...
hisi_sas_v3_hw 0000:74:02.0: phyup: phy7 link_rate=10(sata)
hisi_sas_v3_hw 0000:74:02.0: phyup: phy0 link_rate=9(sata)
hisi_sas_v3_hw 0000:74:02.0: phyup: phy1 link_rate=9(sata)
hisi_sas_v3_hw 0000:74:02.0: phyup: phy2 link_rate=9(sata)
hisi_sas_v3_hw 0000:74:02.0: phyup: phy3 link_rate=9(sata)
hisi_sas_v3_hw 0000:74:02.0: phyup: phy6 link_rate=10(sata)
hisi_sas_v3_hw 0000:74:02.0: phyup: phy5 link_rate=11
hisi_sas_v3_hw 0000:74:02.0: phyup: phy4 link_rate=11
hisi_sas_v3_hw 0000:74:02.0: controller reset complete
hisi_sas_v3_hw 0000:74:02.0: abort tmf: TMF task timeout and not done
hisi_sas_v3_hw 0000:74:02.0: dev[240:1] is gone
sas: driver on host 0000:74:02.0 cannot handle device 5000c500a75a860d,
error:5
To improve the reliability, retry TMF IO max of 3 times for SAS disks which
is the same as softreset does.
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
---
drivers/scsi/hisi_sas/hisi_sas_main.c | 16 ++++++++++------
1 file changed, 10 insertions(+), 6 deletions(-)
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index 247268983df9..4c279a285c20 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -698,13 +698,13 @@ static struct hisi_sas_device *hisi_sas_alloc_dev(struct domain_device *device)
return sas_dev;
}
-#define HISI_SAS_SRST_ATA_DISK_CNT 3
+#define HISI_SAS_DISK_RECOVER_CNT 3
static int hisi_sas_init_device(struct domain_device *device)
{
int rc = TMF_RESP_FUNC_COMPLETE;
struct scsi_lun lun;
struct hisi_sas_tmf_task tmf_task;
- int retry = HISI_SAS_SRST_ATA_DISK_CNT;
+ int retry = HISI_SAS_DISK_RECOVER_CNT;
struct hisi_hba *hisi_hba = dev_to_hisi_hba(device);
struct device *dev = hisi_hba->dev;
struct sas_phy *local_phy;
@@ -714,10 +714,14 @@ static int hisi_sas_init_device(struct domain_device *device)
int_to_scsilun(0, &lun);
tmf_task.tmf = TMF_CLEAR_TASK_SET;
- rc = hisi_sas_debug_issue_ssp_tmf(device, lun.scsi_lun,
- &tmf_task);
- if (rc == TMF_RESP_FUNC_COMPLETE)
- hisi_sas_release_task(hisi_hba, device);
+ while (retry-- > 0) {
+ rc = hisi_sas_debug_issue_ssp_tmf(device, lun.scsi_lun,
+ &tmf_task);
+ if (rc == TMF_RESP_FUNC_COMPLETE) {
+ hisi_sas_release_task(hisi_hba, device);
+ break;
+ }
+ }
break;
case SAS_SATA_DEV:
case SAS_SATA_PM:
--
2.17.1
next prev parent reply other threads:[~2019-09-06 12:59 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-06 12:55 [PATCH 00/13] hisi_sas: Some misc patches John Garry
2019-09-06 12:55 ` [PATCH 01/13] scsi: hisi_sas: add debugfs auto-trigger for internal abort time out John Garry
2019-09-06 12:55 ` [PATCH 02/13] scsi: hisi_sas: Use true/false as input parameter of sas_phy_reset() John Garry
2019-09-06 12:55 ` [PATCH 03/13] scsi: hisi_sas: Directly return when running I_T_nexus reset if phy disabled John Garry
2019-09-06 12:55 ` [PATCH 04/13] scsi: hisi_sas: Remove sleep after issue phy reset if sas_smp_phy_control() fails John Garry
2019-09-06 12:55 ` John Garry [this message]
2019-09-06 12:55 ` [PATCH 06/13] scsi: hisi_sas: Update all the registers after suspend and resume John Garry
2019-09-06 12:55 ` [PATCH 07/13] scsi: hisi_sas: Assign NCQ tag for all NCQ commands John Garry
2019-09-06 12:55 ` [PATCH 08/13] scsi: hisi_sas: Remove hisi_sas_hw.slot_complete John Garry
2019-09-06 12:55 ` [PATCH 09/13] scsi: hisi_sas: Remove redundant work declaration John Garry
2019-09-06 12:55 ` [PATCH 10/13] scsi: hisi_sas: Remove some unused function arguments John Garry
2019-09-06 12:55 ` [PATCH 11/13] scsi: hisi_sas: Add hisi_sas_debugfs_alloc() to centralise allocation John Garry
2019-09-06 12:55 ` [PATCH 12/13] scsi: hisi_sas: Add BIST support for phy loopback John Garry
2019-09-06 12:55 ` [PATCH 13/13] scsi: hisi_sas: Fix the conflict between device gone and host reset John Garry
2019-09-11 2:29 ` [PATCH 00/13] hisi_sas: Some misc patches Martin K. Petersen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1567774537-20003-6-git-send-email-john.garry@huawei.com \
--to=john.garry@huawei.com \
--cc=chenxiang66@hisilicon.com \
--cc=jejb@linux.vnet.ibm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=linuxarm@huawei.com \
--cc=martin.petersen@oracle.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).