[PATCH] hpsa: add missing hunks in reset-patch

* [PATCH] hpsa: add missing hunks in reset-patch
@ 2019-10-14 18:03 Don Brace
  2019-10-18  1:52 ` Martin K. Petersen
  0 siblings, 1 reply; 2+ messages in thread
From: Don Brace @ 2019-10-14 18:03 UTC (permalink / raw)
  To: Kevin.Barnett, scott.teel, Justin.Lindley, scott.benesh,
	bader.alisaleh, gerry.morong, mahesh.rajashekhara, hch, jejb,
	joseph.szczypek, POSWALD, shunyong.yang
  Cc: linux-scsi

- correct returning from reset before outstanding
  commands are completed for the device.

Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
---
 drivers/scsi/hpsa.c |    4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index ac39ed79ccaa..216e557f703e 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -5477,6 +5477,8 @@ static int hpsa_ciss_submit(struct ctlr_info *h,
 		return SCSI_MLQUEUE_HOST_BUSY;
 	}
 
+	c->device = dev;
+
 	enqueue_cmd_and_start_io(h, c);
 	/* the cmd'll come back via intr handler in complete_scsi_command()  */
 	return 0;
@@ -5548,6 +5550,7 @@ static int hpsa_ioaccel_submit(struct ctlr_info *h,
 		hpsa_cmd_init(h, c->cmdindex, c);
 		c->cmd_type = CMD_SCSI;
 		c->scsi_cmd = cmd;
+		c->device = dev;
 		rc = hpsa_scsi_ioaccel_raid_map(h, c);
 		if (rc < 0)     /* scsi_dma_map failed. */
 			rc = SCSI_MLQUEUE_HOST_BUSY;
@@ -5555,6 +5558,7 @@ static int hpsa_ioaccel_submit(struct ctlr_info *h,
 		hpsa_cmd_init(h, c->cmdindex, c);
 		c->cmd_type = CMD_SCSI;
 		c->scsi_cmd = cmd;
+		c->device = dev;
 		rc = hpsa_scsi_ioaccel_direct_map(h, c);
 		if (rc < 0)     /* scsi_dma_map failed. */
 			rc = SCSI_MLQUEUE_HOST_BUSY;


^ permalink raw reply related	[flat|nested] 2+ messages in thread