Linux-SCSI Archive on lore.kernel.org
 help / color / Atom feed
From: James Bottomley <James.Bottomley@HansenPartnership.com>
To: Andrew Morton <akpm@linux-foundation.org>,
	Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-scsi <linux-scsi@vger.kernel.org>,
	linux-kernel <linux-kernel@vger.kernel.org>
Subject: [GIT PULL] SCSI fixes for 5.7-rc6
Date: Fri, 22 May 2020 17:43:40 -0700
Message-ID: <1590194620.14721.28.camel@HansenPartnership.com> (raw)

Three minor fixes, two in drivers, one to fix a hang after reset with
iSCSI, and one to avoid a spurious log message; and the final core one
to correct a suspend/resume miscount with quiesced devices.

The patch is available here:

git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi.git scsi-fixes

The short changelog is:

Bodo Stroesser (1):
      scsi: target: Put lun_ref at end of tmr processing

Can Guo (1):
      scsi: pm: Balance pm_only counter of request queue during system resume

Ewan D. Milne (1):
      scsi: qla2xxx: Do not log message when reading port speed via sysfs

And the diffstat:

 drivers/scsi/qla2xxx/qla_attr.c        |  3 ---
 drivers/scsi/scsi_pm.c                 | 10 ++++++++--
 drivers/target/target_core_transport.c |  1 +
 3 files changed, 9 insertions(+), 5 deletions(-)

With full diff below.

James

---

diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c
index 33255968f03a..2c9e5ac24692 100644
--- a/drivers/scsi/qla2xxx/qla_attr.c
+++ b/drivers/scsi/qla2xxx/qla_attr.c
@@ -1850,9 +1850,6 @@ qla2x00_port_speed_show(struct device *dev, struct device_attribute *attr,
 		return -EINVAL;
 	}
 
-	ql_log(ql_log_info, vha, 0x70d6,
-	    "port speed:%d\n", ha->link_data_rate);
-
 	return scnprintf(buf, PAGE_SIZE, "%s\n", spd[ha->link_data_rate]);
 }
 
diff --git a/drivers/scsi/scsi_pm.c b/drivers/scsi/scsi_pm.c
index 3717eea37ecb..5f0ad8b32e3a 100644
--- a/drivers/scsi/scsi_pm.c
+++ b/drivers/scsi/scsi_pm.c
@@ -80,6 +80,10 @@ static int scsi_dev_type_resume(struct device *dev,
 	dev_dbg(dev, "scsi resume: %d\n", err);
 
 	if (err == 0) {
+		bool was_runtime_suspended;
+
+		was_runtime_suspended = pm_runtime_suspended(dev);
+
 		pm_runtime_disable(dev);
 		err = pm_runtime_set_active(dev);
 		pm_runtime_enable(dev);
@@ -93,8 +97,10 @@ static int scsi_dev_type_resume(struct device *dev,
 		 */
 		if (!err && scsi_is_sdev_device(dev)) {
 			struct scsi_device *sdev = to_scsi_device(dev);
-
-			blk_set_runtime_active(sdev->request_queue);
+			if (was_runtime_suspended)
+				blk_post_runtime_resume(sdev->request_queue, 0);
+			else
+				blk_set_runtime_active(sdev->request_queue);
 		}
 	}
 
diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c
index 594b724bbf79..264a822c0bfa 100644
--- a/drivers/target/target_core_transport.c
+++ b/drivers/target/target_core_transport.c
@@ -3350,6 +3350,7 @@ static void target_tmr_work(struct work_struct *work)
 
 	cmd->se_tfo->queue_tm_rsp(cmd);
 
+	transport_lun_remove_cmd(cmd);
 	transport_cmd_check_stop_to_fabric(cmd);
 	return;
 

             reply index

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-23  0:43 James Bottomley [this message]
2020-05-23  5:05 ` pr-tracker-bot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1590194620.14721.28.camel@HansenPartnership.com \
    --to=james.bottomley@hansenpartnership.com \
    --cc=akpm@linux-foundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=torvalds@linux-foundation.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-SCSI Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-scsi/0 linux-scsi/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-scsi linux-scsi/ https://lore.kernel.org/linux-scsi \
		linux-scsi@vger.kernel.org
	public-inbox-index linux-scsi

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-scsi


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git