Linux-SCSI Archive on lore.kernel.org
 help / color / Atom feed
From: Don Brace <don.brace@microsemi.com>
To: <Kevin.Barnett@microchip.com>, <scott.teel@microchip.com>,
	<Justin.Lindley@microchip.com>, <scott.benesh@microchip.com>,
	<bader.alisaleh@microchip.com>, <gerry.morong@microchip.com>,
	<mahesh.rajashekhara@microchip.com>, <hch@infradead.org>,
	<jejb@linux.vnet.ibm.com>, <joseph.szczypek@hpe.com>,
	<POSWALD@suse.com>
Cc: <linux-scsi@vger.kernel.org>
Subject: [PATCH 3/4] hpsa: increase ctlr eh timeout
Date: Mon, 27 Jul 2020 14:01:33 -0500
Message-ID: <159587649303.27787.8370512556225680281.stgit@brunhilda> (raw)
In-Reply-To: <159587636236.27787.16970342225988726638.stgit@brunhilda>

Increase the timeout value for commands sent to
the controller device.

- controller can become slow to respond to INQUIRIES
  resulting in the SML off-lining the controller
  device.
- when large RAID volumes are created along with
  I/O stress, the controller can be slow to respond
  to INQUIRIES.
  - set/sense config along with device resets
    can delay controller responses.

Reviewed-by: Scott Teel <scott.teel@microsemi.com>
Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
---
 drivers/scsi/hpsa.c |   13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index 9b1edc541ed0..9286e60b8cc4 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -2134,6 +2134,7 @@ static int hpsa_slave_alloc(struct scsi_device *sdev)
 }
 
 /* configure scsi device based on internal per-device structure */
+#define CTLR_TIMEOUT (120 * HZ)
 static int hpsa_slave_configure(struct scsi_device *sdev)
 {
 	struct hpsa_scsi_dev_t *sd;
@@ -2144,17 +2145,21 @@ static int hpsa_slave_configure(struct scsi_device *sdev)
 
 	if (sd) {
 		sd->was_removed = 0;
+		queue_depth = sd->queue_depth != 0 ?
+				sd->queue_depth : sdev->host->can_queue;
 		if (sd->external) {
 			queue_depth = EXTERNAL_QD;
 			sdev->eh_timeout = HPSA_EH_PTRAID_TIMEOUT;
 			blk_queue_rq_timeout(sdev->request_queue,
 						HPSA_EH_PTRAID_TIMEOUT);
-		} else {
-			queue_depth = sd->queue_depth != 0 ?
-					sd->queue_depth : sdev->host->can_queue;
 		}
-	} else
+		if (is_hba_lunid(sd->scsi3addr)) {
+			sdev->eh_timeout = CTLR_TIMEOUT;
+			blk_queue_rq_timeout(sdev->request_queue, CTLR_TIMEOUT);
+		}
+	} else {
 		queue_depth = sdev->host->can_queue;
+	}
 
 	scsi_change_queue_depth(sdev, queue_depth);
 


  parent reply index

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-27 19:01 [PATCH V2 0/4] hpsa updates Don Brace
2020-07-27 19:01 ` [PATCH 1/4] hpsa: correct rare oob condition Don Brace
2020-07-27 19:01 ` [PATCH 2/4] hpsa: increase qd for external luns Don Brace
2020-07-27 19:01 ` Don Brace [this message]
2020-07-27 19:01 ` [PATCH 4/4] hpsa: bump version Don Brace
  -- strict thread matches above, loose matches on Subject: below --
2020-07-20 21:52 [PATCH 0/4] hpsa updates Don Brace
2020-07-20 21:53 ` [PATCH 3/4] hpsa: increase ctlr eh timeout Don Brace

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=159587649303.27787.8370512556225680281.stgit@brunhilda \
    --to=don.brace@microsemi.com \
    --cc=Justin.Lindley@microchip.com \
    --cc=Kevin.Barnett@microchip.com \
    --cc=POSWALD@suse.com \
    --cc=bader.alisaleh@microchip.com \
    --cc=gerry.morong@microchip.com \
    --cc=hch@infradead.org \
    --cc=jejb@linux.vnet.ibm.com \
    --cc=joseph.szczypek@hpe.com \
    --cc=linux-scsi@vger.kernel.org \
    --cc=mahesh.rajashekhara@microchip.com \
    --cc=scott.benesh@microchip.com \
    --cc=scott.teel@microchip.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-SCSI Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-scsi/0 linux-scsi/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-scsi linux-scsi/ https://lore.kernel.org/linux-scsi \
		linux-scsi@vger.kernel.org
	public-inbox-index linux-scsi

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-scsi


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git