From: Don Brace <don.brace@microchip.com>
To: <Kevin.Barnett@microchip.com>, <scott.teel@microchip.com>,
<Justin.Lindley@microchip.com>, <scott.benesh@microchip.com>,
<gerry.morong@microchip.com>, <mahesh.rajashekhara@microchip.com>,
<hch@infradead.org>, <jejb@linux.vnet.ibm.com>,
<joseph.szczypek@hpe.com>, <POSWALD@suse.com>
Cc: <linux-scsi@vger.kernel.org>
Subject: [PATCH V2 01/25] smartpqi: add support for product id
Date: Tue, 8 Dec 2020 13:36:40 -0600 [thread overview]
Message-ID: <160745620079.13450.2594468040754332209.stgit@brunhilda> (raw)
In-Reply-To: <160745609917.13450.11882890596851148601.stgit@brunhilda>
From: Kevin Barnett <kevin.barnett@microchip.com>
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
---
drivers/scsi/smartpqi/smartpqi.h | 11 ++++++++++-
drivers/scsi/smartpqi/smartpqi_init.c | 11 +++++++++--
drivers/scsi/smartpqi/smartpqi_sis.c | 5 +++++
drivers/scsi/smartpqi/smartpqi_sis.h | 1 +
4 files changed, 25 insertions(+), 3 deletions(-)
diff --git a/drivers/scsi/smartpqi/smartpqi.h b/drivers/scsi/smartpqi/smartpqi.h
index 3e54590e6e92..7d3f956e949f 100644
--- a/drivers/scsi/smartpqi/smartpqi.h
+++ b/drivers/scsi/smartpqi/smartpqi.h
@@ -79,7 +79,8 @@ struct pqi_ctrl_registers {
__le32 sis_ctrl_to_host_doorbell_clear; /* A0h */
u8 reserved4[0xb0 - (0xa0 + sizeof(__le32))];
__le32 sis_driver_scratch; /* B0h */
- u8 reserved5[0xbc - (0xb0 + sizeof(__le32))];
+ __le32 sis_product_identifier; /* B4h */
+ u8 reserved5[0xbc - (0xb4 + sizeof(__le32))];
__le32 sis_firmware_status; /* BCh */
u8 reserved6[0x1000 - (0xbc + sizeof(__le32))];
__le32 sis_mailbox[8]; /* 1000h */
@@ -585,6 +586,7 @@ struct pqi_raid_error_info {
/* these values are defined by the PQI spec */
#define PQI_MAX_NUM_ELEMENTS_ADMIN_QUEUE 255
#define PQI_MAX_NUM_ELEMENTS_OPERATIONAL_QUEUE 65535
+
#define PQI_QUEUE_ELEMENT_ARRAY_ALIGNMENT 64
#define PQI_QUEUE_ELEMENT_LENGTH_ALIGNMENT 16
#define PQI_ADMIN_INDEX_ALIGNMENT 64
@@ -1082,6 +1084,11 @@ struct pqi_event {
(PQI_RESERVED_IO_SLOTS_LUN_RESET + PQI_RESERVED_IO_SLOTS_EVENT_ACK + \
PQI_RESERVED_IO_SLOTS_SYNCHRONOUS_REQUESTS)
+#define PQI_CTRL_PRODUCT_ID_GEN1 0
+#define PQI_CTRL_PRODUCT_ID_GEN2 7
+#define PQI_CTRL_PRODUCT_REVISION_A 0
+#define PQI_CTRL_PRODUCT_REVISION_B 1
+
struct pqi_ctrl_info {
unsigned int ctrl_id;
struct pci_dev *pci_dev;
@@ -1089,6 +1096,8 @@ struct pqi_ctrl_info {
char serial_number[17];
char model[17];
char vendor[9];
+ u8 product_id;
+ u8 product_revision;
void __iomem *iomem_base;
struct pqi_ctrl_registers __iomem *registers;
struct pqi_device_registers __iomem *pqi_registers;
diff --git a/drivers/scsi/smartpqi/smartpqi_init.c b/drivers/scsi/smartpqi/smartpqi_init.c
index c53f456fbd09..68fc4327944e 100644
--- a/drivers/scsi/smartpqi/smartpqi_init.c
+++ b/drivers/scsi/smartpqi/smartpqi_init.c
@@ -6259,8 +6259,8 @@ static DEVICE_ATTR(model, 0444, pqi_model_show, NULL);
static DEVICE_ATTR(serial_number, 0444, pqi_serial_number_show, NULL);
static DEVICE_ATTR(vendor, 0444, pqi_vendor_show, NULL);
static DEVICE_ATTR(rescan, 0200, NULL, pqi_host_rescan_store);
-static DEVICE_ATTR(lockup_action, 0644,
- pqi_lockup_action_show, pqi_lockup_action_store);
+static DEVICE_ATTR(lockup_action, 0644, pqi_lockup_action_show,
+ pqi_lockup_action_store);
static struct device_attribute *pqi_shost_attrs[] = {
&dev_attr_driver_version,
@@ -7146,6 +7146,7 @@ static int pqi_force_sis_mode(struct pqi_ctrl_info *ctrl_info)
static int pqi_ctrl_init(struct pqi_ctrl_info *ctrl_info)
{
int rc;
+ u32 product_id;
if (reset_devices) {
sis_soft_reset(ctrl_info);
@@ -7182,6 +7183,10 @@ static int pqi_ctrl_init(struct pqi_ctrl_info *ctrl_info)
return rc;
}
+ product_id = sis_get_product_id(ctrl_info);
+ ctrl_info->product_id = (u8)product_id;
+ ctrl_info->product_revision = (u8)(product_id >> 8);
+
if (reset_devices) {
if (ctrl_info->max_outstanding_requests >
PQI_MAX_OUTSTANDING_REQUESTS_KDUMP)
@@ -8602,6 +8607,8 @@ static void __attribute__((unused)) verify_structures(void)
sis_ctrl_to_host_doorbell_clear) != 0xa0);
BUILD_BUG_ON(offsetof(struct pqi_ctrl_registers,
sis_driver_scratch) != 0xb0);
+ BUILD_BUG_ON(offsetof(struct pqi_ctrl_registers,
+ sis_product_identifier) != 0xb4);
BUILD_BUG_ON(offsetof(struct pqi_ctrl_registers,
sis_firmware_status) != 0xbc);
BUILD_BUG_ON(offsetof(struct pqi_ctrl_registers,
diff --git a/drivers/scsi/smartpqi/smartpqi_sis.c b/drivers/scsi/smartpqi/smartpqi_sis.c
index 26ea6b9d4199..f0199bd87dd1 100644
--- a/drivers/scsi/smartpqi/smartpqi_sis.c
+++ b/drivers/scsi/smartpqi/smartpqi_sis.c
@@ -149,6 +149,11 @@ bool sis_is_kernel_up(struct pqi_ctrl_info *ctrl_info)
SIS_CTRL_KERNEL_UP;
}
+u32 sis_get_product_id(struct pqi_ctrl_info *ctrl_info)
+{
+ return readl(&ctrl_info->registers->sis_product_identifier);
+}
+
/* used for passing command parameters/results when issuing SIS commands */
struct sis_sync_cmd_params {
u32 mailbox[6]; /* mailboxes 0-5 */
diff --git a/drivers/scsi/smartpqi/smartpqi_sis.h b/drivers/scsi/smartpqi/smartpqi_sis.h
index 878d34ca6532..12cd2ab1aead 100644
--- a/drivers/scsi/smartpqi/smartpqi_sis.h
+++ b/drivers/scsi/smartpqi/smartpqi_sis.h
@@ -27,5 +27,6 @@ int sis_reenable_sis_mode(struct pqi_ctrl_info *ctrl_info);
void sis_write_driver_scratch(struct pqi_ctrl_info *ctrl_info, u32 value);
u32 sis_read_driver_scratch(struct pqi_ctrl_info *ctrl_info);
void sis_soft_reset(struct pqi_ctrl_info *ctrl_info);
+u32 sis_get_product_id(struct pqi_ctrl_info *ctrl_info);
#endif /* _SMARTPQI_SIS_H */
next prev parent reply other threads:[~2020-12-08 21:06 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-08 19:36 [PATCH V2 00/25] smartpqi updates Don Brace
2020-12-08 19:36 ` Don Brace [this message]
2020-12-08 19:36 ` [PATCH V2 02/25] smartpqi: refactor aio submission code Don Brace
2020-12-08 19:36 ` [PATCH V2 03/25] smartpqi: refactor build sg list code Don Brace
2020-12-08 19:36 ` [PATCH V2 04/25] smartpqi: add support for raid5 and raid6 writes Don Brace
2020-12-08 19:37 ` [PATCH V2 05/25] smartpqi: add support for raid1 writes Don Brace
2020-12-08 19:37 ` [PATCH V2 06/25] smartpqi: add support for BMIC sense feature cmd and feature bits Don Brace
2020-12-08 19:37 ` [PATCH V2 07/25] smartpqi: update AIO Sub Page 0x02 support Don Brace
2020-12-08 19:37 ` [PATCH V2 08/25] smartpqi: add support for long firmware version Don Brace
2020-12-08 19:37 ` [PATCH V2 09/25] smartpqi: align code with oob driver Don Brace
2020-12-08 19:37 ` [PATCH V2 10/25] smartpqi: add stream detection Don Brace
2020-12-08 19:37 ` [PATCH V2 11/25] smartpqi: add host level stream detection enable Don Brace
2020-12-08 19:37 ` [PATCH V2 12/25] smartpqi: enable support for NVMe encryption Don Brace
2020-12-08 19:37 ` [PATCH V2 13/25] smartpqi: disable write_same for nvme hba disks Don Brace
2020-12-08 19:37 ` [PATCH V2 14/25] smartpqi: fix driver synchronization issues Don Brace
2020-12-08 19:38 ` [PATCH V2 15/25] smartpqi: fix host qdepth limit Don Brace
2020-12-08 19:38 ` [PATCH V2 16/25] smartpqi: convert snprintf to scnprintf Don Brace
2020-12-08 19:38 ` [PATCH V2 17/25] smartpqi: change timing of release of QRM memory during OFA Don Brace
2020-12-08 19:38 ` [PATCH V2 18/25] smartpqi: return busy indication for IOCTLs when ofa is active Don Brace
2020-12-08 19:38 ` [PATCH V2 19/25] smartpqi: add phy id support for the physical drives Don Brace
2020-12-08 19:38 ` [PATCH V2 20/25] smartpqi: update sas initiator_port_protocols and target_port_protocols Don Brace
2020-12-08 19:38 ` [PATCH V2 21/25] smartpqi: add additional logging for LUN resets Don Brace
2020-12-08 19:38 ` [PATCH V2 22/25] smartpqi: update enclosure identifier in sysf Don Brace
2020-12-08 19:38 ` [PATCH V2 23/25] smartpqi: correct system hangs when resuming from hibernation Don Brace
2020-12-08 19:38 ` [PATCH V2 24/25] smartpqi: add new pci ids Don Brace
2020-12-08 19:39 ` [PATCH V2 25/25] smartpqi: update version to 2.1.6-005 Don Brace
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=160745620079.13450.2594468040754332209.stgit@brunhilda \
--to=don.brace@microchip.com \
--cc=Justin.Lindley@microchip.com \
--cc=Kevin.Barnett@microchip.com \
--cc=POSWALD@suse.com \
--cc=gerry.morong@microchip.com \
--cc=hch@infradead.org \
--cc=jejb@linux.vnet.ibm.com \
--cc=joseph.szczypek@hpe.com \
--cc=linux-scsi@vger.kernel.org \
--cc=mahesh.rajashekhara@microchip.com \
--cc=scott.benesh@microchip.com \
--cc=scott.teel@microchip.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).