From: Don Brace <don.brace@microchip.com>
To: <Kevin.Barnett@microchip.com>, <scott.teel@microchip.com>,
<Justin.Lindley@microchip.com>, <scott.benesh@microchip.com>,
<gerry.morong@microchip.com>, <mahesh.rajashekhara@microchip.com>,
<mike.mcgowen@microchip.com>, <murthy.bhat@microchip.com>,
<hch@infradead.org>, <jejb@linux.vnet.ibm.com>,
<joseph.szczypek@hpe.com>, <POSWALD@suse.com>
Cc: <linux-scsi@vger.kernel.org>
Subject: [PATCH V5 11/31] smartpqi: add stream detection
Date: Thu, 11 Mar 2021 14:15:56 -0600 [thread overview]
Message-ID: <161549375693.25025.2962141451773219796.stgit@brunhilda> (raw)
In-Reply-To: <161549045434.25025.17473629602756431540.stgit@brunhilda>
* Enhance performance by adding sequential stream detection.
for R5/R6 sequential write requests.
* Reduce stripe lock contention with full-stripe write
operations.
* There is one common stripe lock for each RAID volume
that can be set by either the RAID engine or the AIO engine.
* The AIO path has I/O request sizes well below the
stripe size resulting in many Read-Modify-Write operations.
* Sending the request to the RAID engine allows for coalescing
requests into full stripe operations resulting in reduced
Read-Modify-Write operations.
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
---
drivers/scsi/smartpqi/smartpqi.h | 9 +++
drivers/scsi/smartpqi/smartpqi_init.c | 87 +++++++++++++++++++++++++++++++--
2 files changed, 90 insertions(+), 6 deletions(-)
diff --git a/drivers/scsi/smartpqi/smartpqi.h b/drivers/scsi/smartpqi/smartpqi.h
index 6639432f3dab..976bfd8c5192 100644
--- a/drivers/scsi/smartpqi/smartpqi.h
+++ b/drivers/scsi/smartpqi/smartpqi.h
@@ -1043,6 +1043,13 @@ struct pqi_scsi_dev_raid_map_data {
#define RAID_CTLR_LUNID "\0\0\0\0\0\0\0\0"
+#define NUM_STREAMS_PER_LUN 8
+
+struct pqi_stream_data {
+ u64 next_lba;
+ u32 last_accessed;
+};
+
struct pqi_scsi_dev {
int devtype; /* as reported by INQUIRY commmand */
u8 device_type; /* as reported by */
@@ -1097,6 +1104,7 @@ struct pqi_scsi_dev {
struct list_head add_list_entry;
struct list_head delete_list_entry;
+ struct pqi_stream_data stream_data[NUM_STREAMS_PER_LUN];
atomic_t scsi_cmds_outstanding;
atomic_t raid_bypass_cnt;
};
@@ -1296,6 +1304,7 @@ struct pqi_ctrl_info {
u8 enable_r5_writes : 1;
u8 enable_r6_writes : 1;
u8 lv_drive_type_mix_valid : 1;
+ u8 enable_stream_detection : 1;
u8 ciss_report_log_flags;
u32 max_transfer_encrypted_sas_sata;
diff --git a/drivers/scsi/smartpqi/smartpqi_init.c b/drivers/scsi/smartpqi/smartpqi_init.c
index 143bb7b64095..27bd3d9a3810 100644
--- a/drivers/scsi/smartpqi/smartpqi_init.c
+++ b/drivers/scsi/smartpqi/smartpqi_init.c
@@ -5688,8 +5688,82 @@ void pqi_prep_for_scsi_done(struct scsi_cmnd *scmd)
atomic_dec(&device->scsi_cmds_outstanding);
}
-static int pqi_scsi_queue_command(struct Scsi_Host *shost,
+static bool pqi_is_parity_write_stream(struct pqi_ctrl_info *ctrl_info,
struct scsi_cmnd *scmd)
+{
+ u32 oldest_jiffies;
+ u8 lru_index;
+ int i;
+ int rc;
+ struct pqi_scsi_dev *device;
+ struct pqi_stream_data *pqi_stream_data;
+ struct pqi_scsi_dev_raid_map_data rmd;
+
+ if (!ctrl_info->enable_stream_detection)
+ return false;
+
+ rc = pqi_get_aio_lba_and_block_count(scmd, &rmd);
+ if (rc)
+ return false;
+
+ /* Check writes only. */
+ if (!rmd.is_write)
+ return false;
+
+ device = scmd->device->hostdata;
+
+ /* Check for RAID 5/6 streams. */
+ if (device->raid_level != SA_RAID_5 && device->raid_level != SA_RAID_6)
+ return false;
+
+ /*
+ * If controller does not support AIO RAID{5,6} writes, need to send
+ * requests down non-AIO path.
+ */
+ if ((device->raid_level == SA_RAID_5 && !ctrl_info->enable_r5_writes) ||
+ (device->raid_level == SA_RAID_6 && !ctrl_info->enable_r6_writes))
+ return true;
+
+ lru_index = 0;
+ oldest_jiffies = INT_MAX;
+ for (i = 0; i < NUM_STREAMS_PER_LUN; i++) {
+ pqi_stream_data = &device->stream_data[i];
+ /*
+ * Check for adjacent request or request is within
+ * the previous request.
+ */
+ if ((pqi_stream_data->next_lba &&
+ rmd.first_block >= pqi_stream_data->next_lba) &&
+ rmd.first_block <= pqi_stream_data->next_lba +
+ rmd.block_cnt) {
+ pqi_stream_data->next_lba = rmd.first_block +
+ rmd.block_cnt;
+ pqi_stream_data->last_accessed = jiffies;
+ return true;
+ }
+
+ /* unused entry */
+ if (pqi_stream_data->last_accessed == 0) {
+ lru_index = i;
+ break;
+ }
+
+ /* Find entry with oldest last accessed time. */
+ if (pqi_stream_data->last_accessed <= oldest_jiffies) {
+ oldest_jiffies = pqi_stream_data->last_accessed;
+ lru_index = i;
+ }
+ }
+
+ /* Set LRU entry. */
+ pqi_stream_data = &device->stream_data[lru_index];
+ pqi_stream_data->last_accessed = jiffies;
+ pqi_stream_data->next_lba = rmd.first_block + rmd.block_cnt;
+
+ return false;
+}
+
+static int pqi_scsi_queue_command(struct Scsi_Host *shost, struct scsi_cmnd *scmd)
{
int rc;
struct pqi_ctrl_info *ctrl_info;
@@ -5736,11 +5810,12 @@ static int pqi_scsi_queue_command(struct Scsi_Host *shost,
raid_bypassed = false;
if (device->raid_bypass_enabled &&
!blk_rq_is_passthrough(scmd->request)) {
- rc = pqi_raid_bypass_submit_scsi_cmd(ctrl_info, device,
- scmd, queue_group);
- if (rc == 0 || rc == SCSI_MLQUEUE_HOST_BUSY) {
- raid_bypassed = true;
- atomic_inc(&device->raid_bypass_cnt);
+ if (!pqi_is_parity_write_stream(ctrl_info, scmd)) {
+ rc = pqi_raid_bypass_submit_scsi_cmd(ctrl_info, device, scmd, queue_group);
+ if (rc == 0 || rc == SCSI_MLQUEUE_HOST_BUSY) {
+ raid_bypassed = true;
+ atomic_inc(&device->raid_bypass_cnt);
+ }
}
}
if (!raid_bypassed)
next prev parent reply other threads:[~2021-03-11 20:16 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-11 20:14 [PATCH V5 00/31] smartpqi updates Don Brace
2021-03-11 20:14 ` [PATCH V5 01/31] smartpqi: use host wide tagspace Don Brace
2021-03-11 20:15 ` [PATCH V5 02/31] smartpqi: fix request leakage Don Brace
2021-03-11 20:15 ` [PATCH V5 03/31] smartpqi: add support for product id Don Brace
2021-03-11 20:15 ` [PATCH V5 04/31] smartpqi: refactor aio submission code Don Brace
2021-03-11 20:15 ` [PATCH V5 05/31] smartpqi: refactor build sg list code Don Brace
2021-03-11 20:15 ` [PATCH V5 06/31] smartpqi: add support for raid5 and raid6 writes Don Brace
2021-03-11 20:15 ` [PATCH V5 07/31] smartpqi: add support for raid1 writes Don Brace
2021-03-11 20:15 ` [PATCH V5 08/31] smartpqi: add support for BMIC sense feature cmd and feature bits Don Brace
2021-03-11 20:15 ` [PATCH V5 09/31] smartpqi: add support for long firmware version Don Brace
2021-03-11 20:15 ` [PATCH V5 10/31] smartpqi: align code with oob driver Don Brace
2021-03-11 20:15 ` Don Brace [this message]
2021-03-11 20:16 ` [PATCH V5 12/31] smartpqi: add host level stream detection enable Don Brace
2021-03-11 20:16 ` [PATCH V5 13/31] smartpqi: disable write_same for nvme hba disks Don Brace
2021-03-11 20:16 ` [PATCH V5 14/31] smartpqi: remove timeouts from internal cmds Don Brace
2021-03-11 20:16 ` [PATCH V5 15/31] smartpqi: add support for wwid Don Brace
2021-03-11 20:16 ` [PATCH V5 16/31] smartpqi: update event handler Don Brace
2021-03-11 20:16 ` [PATCH V5 17/31] smartpqi: update soft reset management for OFA Don Brace
2021-03-11 20:16 ` [PATCH V5 18/31] smartpqi: synchronize device resets with mutex Don Brace
2021-03-11 20:16 ` [PATCH V5 19/31] smartpqi: update suspend resume and shutdown Don Brace
2021-03-11 20:16 ` [PATCH V5 20/31] smartpqi: update raid bypass handling Don Brace
2021-03-11 20:16 ` [PATCH V5 21/31] smartpqi: update ofa management Don Brace
2021-03-11 20:17 ` [PATCH V5 22/31] smartpqi: update device scan operations Don Brace
2021-03-11 20:17 ` [PATCH V5 23/31] smartpqi: fix driver synchronization issues Don Brace
2021-03-11 20:17 ` [PATCH V5 24/31] smartpqi: convert snprintf to scnprintf Don Brace
2021-03-11 20:17 ` [PATCH V5 25/31] smartpqi: add phy id support for the physical drives Don Brace
2021-03-11 20:17 ` [PATCH V5 26/31] smartpqi: update sas initiator_port_protocols and target_port_protocols Don Brace
2021-03-11 20:17 ` [PATCH V5 27/31] smartpqi: add additional logging for LUN resets Don Brace
2021-03-11 20:17 ` [PATCH V5 28/31] smartpqi: update enclosure identifier in sysfs Don Brace
2021-03-11 20:17 ` [PATCH V5 29/31] smartpqi: correct system hangs when resuming from hibernation Don Brace
2021-03-11 20:17 ` [PATCH V5 30/31] smartpqi: add new pci ids Don Brace
2021-03-11 20:17 ` [PATCH V5 31/31] smartpqi: update version to 2.1.8-045 Don Brace
2021-04-06 19:55 ` [PATCH V5 00/31] smartpqi updates Don.Brace
2021-04-07 3:16 ` Martin K. Petersen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=161549375693.25025.2962141451773219796.stgit@brunhilda \
--to=don.brace@microchip.com \
--cc=Justin.Lindley@microchip.com \
--cc=Kevin.Barnett@microchip.com \
--cc=POSWALD@suse.com \
--cc=gerry.morong@microchip.com \
--cc=hch@infradead.org \
--cc=jejb@linux.vnet.ibm.com \
--cc=joseph.szczypek@hpe.com \
--cc=linux-scsi@vger.kernel.org \
--cc=mahesh.rajashekhara@microchip.com \
--cc=mike.mcgowen@microchip.com \
--cc=murthy.bhat@microchip.com \
--cc=scott.benesh@microchip.com \
--cc=scott.teel@microchip.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).