linux-scsi.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Bodo Stroesser <bstroesser@ts.fujitsu.com>,
	Bart Van Assche <bvanassche@acm.org>,
	Hannes Reinecke <hare@suse.com>,
	"Martin K . Petersen" <martin.petersen@oracle.com>,
	Sasha Levin <sashal@kernel.org>,
	linux-scsi@vger.kernel.org, target-devel@vger.kernel.org
Subject: [PATCH AUTOSEL 4.14 17/24] scsi: target: core: Do not overwrite CDB byte 1
Date: Wed, 30 Oct 2019 11:55:48 -0400	[thread overview]
Message-ID: <20191030155555.10494-17-sashal@kernel.org> (raw)
In-Reply-To: <20191030155555.10494-1-sashal@kernel.org>

From: Bodo Stroesser <bstroesser@ts.fujitsu.com>

[ Upstream commit 27e84243cb63601a10e366afe3e2d05bb03c1cb5 ]

passthrough_parse_cdb() - used by TCMU and PSCSI - attepts to reset the LUN
field of SCSI-2 CDBs (bits 5,6,7 of byte 1).  The current code is wrong as
for newer commands not having the LUN field it overwrites relevant command
bits (e.g. for SECURITY PROTOCOL IN / OUT). We think this code was
unnecessary from the beginning or at least it is no longer useful. So we
remove it entirely.

Link: https://lore.kernel.org/r/12498eab-76fd-eaad-1316-c2827badb76a@ts.fujitsu.com
Signed-off-by: Bodo Stroesser <bstroesser@ts.fujitsu.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/target/target_core_device.c | 21 ---------------------
 1 file changed, 21 deletions(-)

diff --git a/drivers/target/target_core_device.c b/drivers/target/target_core_device.c
index 84742125f7730..92b52d2314b53 100644
--- a/drivers/target/target_core_device.c
+++ b/drivers/target/target_core_device.c
@@ -1151,27 +1151,6 @@ passthrough_parse_cdb(struct se_cmd *cmd,
 	struct se_device *dev = cmd->se_dev;
 	unsigned int size;
 
-	/*
-	 * Clear a lun set in the cdb if the initiator talking to use spoke
-	 * and old standards version, as we can't assume the underlying device
-	 * won't choke up on it.
-	 */
-	switch (cdb[0]) {
-	case READ_10: /* SBC - RDProtect */
-	case READ_12: /* SBC - RDProtect */
-	case READ_16: /* SBC - RDProtect */
-	case SEND_DIAGNOSTIC: /* SPC - SELF-TEST Code */
-	case VERIFY: /* SBC - VRProtect */
-	case VERIFY_16: /* SBC - VRProtect */
-	case WRITE_VERIFY: /* SBC - VRProtect */
-	case WRITE_VERIFY_12: /* SBC - VRProtect */
-	case MAINTENANCE_IN: /* SPC - Parameter Data Format for SA RTPG */
-		break;
-	default:
-		cdb[1] &= 0x1f; /* clear logical unit number */
-		break;
-	}
-
 	/*
 	 * For REPORT LUNS we always need to emulate the response, for everything
 	 * else, pass it up.
-- 
2.20.1


      parent reply	other threads:[~2019-10-30 15:59 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20191030155555.10494-1-sashal@kernel.org>
2019-10-30 15:55 ` [PATCH AUTOSEL 4.14 09/24] scsi: scsi_dh_alua: handle RTPG sense code correctly during state transitions Sasha Levin
2019-10-30 15:55 ` [PATCH AUTOSEL 4.14 10/24] scsi: sni_53c710: fix compilation error Sasha Levin
2019-10-30 15:55 ` [PATCH AUTOSEL 4.14 11/24] scsi: fix kconfig dependency warning related to 53C700_LE_ON_BE Sasha Levin
2019-10-30 15:55 ` Sasha Levin [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191030155555.10494-17-sashal@kernel.org \
    --to=sashal@kernel.org \
    --cc=bstroesser@ts.fujitsu.com \
    --cc=bvanassche@acm.org \
    --cc=hare@suse.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=martin.petersen@oracle.com \
    --cc=stable@vger.kernel.org \
    --cc=target-devel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).