Linux-SCSI Archive on lore.kernel.org
 help / color / Atom feed
From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Finn Thain <fthain@telegraphics.com.au>,
	Michael Schmitz <schmitzmic@gmail.com>,
	"Martin K . Petersen" <martin.petersen@oracle.com>,
	Sasha Levin <sashal@kernel.org>,
	linux-scsi@vger.kernel.org
Subject: [PATCH AUTOSEL 4.19 175/191] scsi: NCR5380: Handle BUS FREE during reselection
Date: Sat,  9 Nov 2019 21:39:57 -0500
Message-ID: <20191110024013.29782-175-sashal@kernel.org> (raw)
In-Reply-To: <20191110024013.29782-1-sashal@kernel.org>

From: Finn Thain <fthain@telegraphics.com.au>

[ Upstream commit ca694afad707cb3ae2fdef3b28454444d9ac726e ]

The X3T9.2 specification (draft) says, under "6.1.4.2 RESELECTION time-out
procedure", that a target may assert RST or go to BUS FREE phase if the
initiator does not respond within 200 us. Something like this has been
observed with AztecMonster II target. When it happens, all we can do is wait
for the target to try again.

Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/NCR5380.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/scsi/NCR5380.c b/drivers/scsi/NCR5380.c
index 5c3ffb466bb10..bce6c990d060a 100644
--- a/drivers/scsi/NCR5380.c
+++ b/drivers/scsi/NCR5380.c
@@ -2039,6 +2039,9 @@ static void NCR5380_reselect(struct Scsi_Host *instance)
 
 	if (NCR5380_poll_politely(hostdata,
 	                          STATUS_REG, SR_REQ, SR_REQ, 2 * HZ) < 0) {
+		if ((NCR5380_read(STATUS_REG) & (SR_BSY | SR_SEL)) == 0)
+			/* BUS FREE phase */
+			return;
 		shost_printk(KERN_ERR, instance, "reselect: REQ timeout\n");
 		do_abort(instance);
 		return;
-- 
2.20.1


  parent reply index

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20191110024013.29782-1-sashal@kernel.org>
2019-11-10  2:39 ` [PATCH AUTOSEL 4.19 127/191] scsi: libsas: always unregister the old device if going to discover new Sasha Levin
2019-11-10  2:39 ` [PATCH AUTOSEL 4.19 168/191] scsi: NCR5380: Clear all unissued commands on host reset Sasha Levin
2019-11-10  2:39 ` [PATCH AUTOSEL 4.19 169/191] scsi: NCR5380: Have NCR5380_select() return a bool Sasha Levin
2019-11-10  2:39 ` [PATCH AUTOSEL 4.19 170/191] scsi: NCR5380: Withhold disconnect privilege for REQUEST SENSE Sasha Levin
2019-11-10  2:39 ` [PATCH AUTOSEL 4.19 171/191] scsi: NCR5380: Use DRIVER_SENSE to indicate valid sense data Sasha Levin
2019-11-10  2:39 ` [PATCH AUTOSEL 4.19 172/191] scsi: NCR5380: Check for invalid reselection target Sasha Levin
2019-11-10  2:39 ` [PATCH AUTOSEL 4.19 173/191] scsi: NCR5380: Don't clear busy flag when abort fails Sasha Levin
2019-11-10  2:39 ` [PATCH AUTOSEL 4.19 174/191] scsi: NCR5380: Don't call dsprintk() following reselection interrupt Sasha Levin
2019-11-10  2:39 ` Sasha Levin [this message]
2019-11-10  2:39 ` [PATCH AUTOSEL 4.19 176/191] scsi: NCR5380: Check for bus reset Sasha Levin

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191110024013.29782-175-sashal@kernel.org \
    --to=sashal@kernel.org \
    --cc=fthain@telegraphics.com.au \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=martin.petersen@oracle.com \
    --cc=schmitzmic@gmail.com \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-SCSI Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-scsi/0 linux-scsi/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-scsi linux-scsi/ https://lore.kernel.org/linux-scsi \
		linux-scsi@vger.kernel.org
	public-inbox-index linux-scsi

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-scsi


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git