Linux-SCSI Archive on lore.kernel.org
 help / color / Atom feed
From: Arnd Bergmann <arnd@arndb.de>
To: Satish Kharat <satishkh@cisco.com>,
	Sesidhar Baddela <sebaddel@cisco.com>,
	Karan Tilak Kumar <kartilak@cisco.com>,
	"James E.J. Bottomley" <jejb@linux.ibm.com>,
	"Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Oleksandr Natalenko <oleksandr@redhat.com>,
	Arnd Bergmann <arnd@arndb.de>,
	stable@vger.kernel.org, Joe Eykholt <jeykholt@cisco.com>,
	Mike Christie <michaelc@cs.wisc.edu>,
	Abhijeet Joglekar <abjoglek@cisco.com>,
	James Bottomley <James.Bottomley@HansenPartnership.com>,
	Colin Ian King <colin.king@canonical.com>,
	linux-scsi@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH] fnic: fix invalid stack access
Date: Tue,  7 Jan 2020 21:15:49 +0100
Message-ID: <20200107201602.4096790-1-arnd@arndb.de> (raw)

gcc -O3 warns that some local variables are not properly initialized:

drivers/scsi/fnic/vnic_dev.c: In function 'fnic_dev_hang_notify':
drivers/scsi/fnic/vnic_dev.c:511:16: error: 'a0' is used uninitialized in this function [-Werror=uninitialized]
  vdev->args[0] = *a0;
  ~~~~~~~~~~~~~~^~~~~
drivers/scsi/fnic/vnic_dev.c:691:6: note: 'a0' was declared here
  u64 a0, a1;
      ^~
drivers/scsi/fnic/vnic_dev.c:512:16: error: 'a1' is used uninitialized in this function [-Werror=uninitialized]
  vdev->args[1] = *a1;
  ~~~~~~~~~~~~~~^~~~~
drivers/scsi/fnic/vnic_dev.c:691:10: note: 'a1' was declared here
  u64 a0, a1;
          ^~
drivers/scsi/fnic/vnic_dev.c: In function 'fnic_dev_mac_addr':
drivers/scsi/fnic/vnic_dev.c:512:16: error: 'a1' is used uninitialized in this function [-Werror=uninitialized]
  vdev->args[1] = *a1;
  ~~~~~~~~~~~~~~^~~~~
drivers/scsi/fnic/vnic_dev.c:698:10: note: 'a1' was declared here
  u64 a0, a1;
          ^~

Apparently the code relies on the local variables occupying
adjacent memory locations in the same order, but this is of
course not guaranteed.

Use an array of two u64 variables where needed to make it work
correctly.

I suspect there is also an endianess bug here, but have not
digged in deep enough to be sure.

Cc: stable@vger.kernel.org
Fixes: 5df6d737dd4b ("[SCSI] fnic: Add new Cisco PCI-Express FCoE HBA")
Fixes: mmtom ("init/Kconfig: enable -O3 for all arches")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
 drivers/scsi/fnic/vnic_dev.c | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/drivers/scsi/fnic/vnic_dev.c b/drivers/scsi/fnic/vnic_dev.c
index 1f55b9e4e74a..1b88a3b53eee 100644
--- a/drivers/scsi/fnic/vnic_dev.c
+++ b/drivers/scsi/fnic/vnic_dev.c
@@ -688,26 +688,26 @@ int vnic_dev_soft_reset_done(struct vnic_dev *vdev, int *done)
 
 int vnic_dev_hang_notify(struct vnic_dev *vdev)
 {
-	u64 a0, a1;
+	u64 a0 = 0, a1 = 0;
 	int wait = 1000;
 	return vnic_dev_cmd(vdev, CMD_HANG_NOTIFY, &a0, &a1, wait);
 }
 
 int vnic_dev_mac_addr(struct vnic_dev *vdev, u8 *mac_addr)
 {
-	u64 a0, a1;
+	u64 a[2] = {};
 	int wait = 1000;
 	int err, i;
 
 	for (i = 0; i < ETH_ALEN; i++)
 		mac_addr[i] = 0;
 
-	err = vnic_dev_cmd(vdev, CMD_MAC_ADDR, &a0, &a1, wait);
+	err = vnic_dev_cmd(vdev, CMD_MAC_ADDR, &a[0], &a[1], wait);
 	if (err)
 		return err;
 
 	for (i = 0; i < ETH_ALEN; i++)
-		mac_addr[i] = ((u8 *)&a0)[i];
+		mac_addr[i] = ((u8 *)&a)[i];
 
 	return 0;
 }
@@ -732,30 +732,30 @@ void vnic_dev_packet_filter(struct vnic_dev *vdev, int directed, int multicast,
 
 void vnic_dev_add_addr(struct vnic_dev *vdev, u8 *addr)
 {
-	u64 a0 = 0, a1 = 0;
+	u64 a[2] = {};
 	int wait = 1000;
 	int err;
 	int i;
 
 	for (i = 0; i < ETH_ALEN; i++)
-		((u8 *)&a0)[i] = addr[i];
+		((u8 *)&a)[i] = addr[i];
 
-	err = vnic_dev_cmd(vdev, CMD_ADDR_ADD, &a0, &a1, wait);
+	err = vnic_dev_cmd(vdev, CMD_ADDR_ADD, &a[0], &a[1], wait);
 	if (err)
 		pr_err("Can't add addr [%pM], %d\n", addr, err);
 }
 
 void vnic_dev_del_addr(struct vnic_dev *vdev, u8 *addr)
 {
-	u64 a0 = 0, a1 = 0;
+	u64 a[2] = {};
 	int wait = 1000;
 	int err;
 	int i;
 
 	for (i = 0; i < ETH_ALEN; i++)
-		((u8 *)&a0)[i] = addr[i];
+		((u8 *)&a)[i] = addr[i];
 
-	err = vnic_dev_cmd(vdev, CMD_ADDR_DEL, &a0, &a1, wait);
+	err = vnic_dev_cmd(vdev, CMD_ADDR_DEL, &a[0], &a[1], wait);
 	if (err)
 		pr_err("Can't del addr [%pM], %d\n", addr, err);
 }
-- 
2.20.0


             reply index

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-01-07 20:15 Arnd Bergmann [this message]
2020-01-16  4:01 ` Martin K. Petersen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200107201602.4096790-1-arnd@arndb.de \
    --to=arnd@arndb.de \
    --cc=James.Bottomley@HansenPartnership.com \
    --cc=abjoglek@cisco.com \
    --cc=colin.king@canonical.com \
    --cc=jejb@linux.ibm.com \
    --cc=jeykholt@cisco.com \
    --cc=kartilak@cisco.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=martin.petersen@oracle.com \
    --cc=michaelc@cs.wisc.edu \
    --cc=oleksandr@redhat.com \
    --cc=satishkh@cisco.com \
    --cc=sebaddel@cisco.com \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-SCSI Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-scsi/0 linux-scsi/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-scsi linux-scsi/ https://lore.kernel.org/linux-scsi \
		linux-scsi@vger.kernel.org
	public-inbox-index linux-scsi

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-scsi


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git