From: Douglas Gilbert <dgilbert@interlog.com>
To: linux-scsi@vger.kernel.org
Cc: martin.petersen@oracle.com, jejb@linux.vnet.ibm.com, hare@suse.de
Subject: [PATCH v6 33/37] sg: move procfs objects to avoid forward decls
Date: Mon, 13 Jan 2020 00:57:51 +0100 [thread overview]
Message-ID: <20200112235755.14197-34-dgilbert@interlog.com> (raw)
In-Reply-To: <20200112235755.14197-1-dgilbert@interlog.com>
Move the procfs related file_operations and seq_operations
definitions toward the end of the source file to minimize the
need for forward declarations of the functions they name.
Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
---
drivers/scsi/sg.c | 133 +++++++++++++++++++++-------------------------
1 file changed, 60 insertions(+), 73 deletions(-)
diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c
index 4d3850a43304..73802c7ffea5 100644
--- a/drivers/scsi/sg.c
+++ b/drivers/scsi/sg.c
@@ -3816,79 +3816,6 @@ sg_rq_st_str(enum sg_rq_state rq_st, bool long_str)
#endif
#if IS_ENABLED(CONFIG_SCSI_PROC_FS) /* long, almost to end of file */
-static int sg_proc_seq_show_int(struct seq_file *s, void *v);
-
-static int sg_proc_single_open_adio(struct inode *inode, struct file *filp);
-static ssize_t sg_proc_write_adio(struct file *filp, const char __user *buffer,
- size_t count, loff_t *off);
-static const struct file_operations adio_fops = {
- .owner = THIS_MODULE,
- .open = sg_proc_single_open_adio,
- .read = seq_read,
- .llseek = seq_lseek,
- .write = sg_proc_write_adio,
- .release = single_release,
-};
-
-static int sg_proc_single_open_dressz(struct inode *inode, struct file *filp);
-static ssize_t sg_proc_write_dressz(struct file *filp,
- const char __user *buffer, size_t count, loff_t *off);
-static const struct file_operations dressz_fops = {
- .owner = THIS_MODULE,
- .open = sg_proc_single_open_dressz,
- .read = seq_read,
- .llseek = seq_lseek,
- .write = sg_proc_write_dressz,
- .release = single_release,
-};
-
-static int sg_proc_seq_show_version(struct seq_file *s, void *v);
-static int sg_proc_seq_show_devhdr(struct seq_file *s, void *v);
-static int sg_proc_seq_show_dev(struct seq_file *s, void *v);
-static void * dev_seq_start(struct seq_file *s, loff_t *pos);
-static void * dev_seq_next(struct seq_file *s, void *v, loff_t *pos);
-static void dev_seq_stop(struct seq_file *s, void *v);
-static const struct seq_operations dev_seq_ops = {
- .start = dev_seq_start,
- .next = dev_seq_next,
- .stop = dev_seq_stop,
- .show = sg_proc_seq_show_dev,
-};
-
-static int sg_proc_seq_show_devstrs(struct seq_file *s, void *v);
-static const struct seq_operations devstrs_seq_ops = {
- .start = dev_seq_start,
- .next = dev_seq_next,
- .stop = dev_seq_stop,
- .show = sg_proc_seq_show_devstrs,
-};
-
-static int sg_proc_seq_show_debug(struct seq_file *s, void *v);
-static const struct seq_operations debug_seq_ops = {
- .start = dev_seq_start,
- .next = dev_seq_next,
- .stop = dev_seq_stop,
- .show = sg_proc_seq_show_debug,
-};
-
-static int
-sg_proc_init(void)
-{
- struct proc_dir_entry *p;
-
- p = proc_mkdir("scsi/sg", NULL);
- if (!p)
- return 1;
-
- proc_create("allow_dio", 0644, p, &adio_fops);
- proc_create_seq("debug", 0444, p, &debug_seq_ops);
- proc_create("def_reserved_size", 0644, p, &dressz_fops);
- proc_create_single("device_hdr", 0444, p, sg_proc_seq_show_devhdr);
- proc_create_seq("devices", 0444, p, &dev_seq_ops);
- proc_create_seq("device_strs", 0444, p, &devstrs_seq_ops);
- proc_create_single("version", 0444, p, sg_proc_seq_show_version);
- return 0;
-}
static int
sg_last_dev(void)
@@ -4261,6 +4188,66 @@ sg_proc_seq_show_debug(struct seq_file *s, void *v)
return 0;
}
+static const struct file_operations adio_fops = {
+ .owner = THIS_MODULE,
+ .open = sg_proc_single_open_adio,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .write = sg_proc_write_adio,
+ .release = single_release,
+};
+
+static const struct file_operations dressz_fops = {
+ .owner = THIS_MODULE,
+ .open = sg_proc_single_open_dressz,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .write = sg_proc_write_dressz,
+ .release = single_release,
+};
+
+static const struct seq_operations dev_seq_ops = {
+ .start = dev_seq_start,
+ .next = dev_seq_next,
+ .stop = dev_seq_stop,
+ .show = sg_proc_seq_show_dev,
+};
+
+static const struct seq_operations devstrs_seq_ops = {
+ .start = dev_seq_start,
+ .next = dev_seq_next,
+ .stop = dev_seq_stop,
+ .show = sg_proc_seq_show_devstrs,
+};
+
+static const struct seq_operations debug_seq_ops = {
+ .start = dev_seq_start,
+ .next = dev_seq_next,
+ .stop = dev_seq_stop,
+ .show = sg_proc_seq_show_debug,
+};
+
+static int
+sg_proc_init(void)
+{
+ struct proc_dir_entry *p;
+
+ p = proc_mkdir("scsi/sg", NULL);
+ if (!p)
+ return 1;
+
+ proc_create("allow_dio", 0644, p, &adio_fops);
+ proc_create_seq("debug", 0444, p, &debug_seq_ops);
+ proc_create("def_reserved_size", 0644, p, &dressz_fops);
+ proc_create_single("device_hdr", 0444, p, sg_proc_seq_show_devhdr);
+ proc_create_seq("devices", 0444, p, &dev_seq_ops);
+ proc_create_seq("device_strs", 0444, p, &devstrs_seq_ops);
+ proc_create_single("version", 0444, p, sg_proc_seq_show_version);
+ return 0;
+}
+
+/* remove_proc_subtree("scsi/sg", NULL) in exit_sg() does cleanup */
+
#endif /* CONFIG_SCSI_PROC_FS (~400 lines back) */
module_init(init_sg);
--
2.24.1
next prev parent reply other threads:[~2020-01-12 23:58 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-12 23:57 [PATCH v6 00/37] sg: add v4 interface Douglas Gilbert
2020-01-12 23:57 ` [PATCH v6 01/37] sg: move functions around Douglas Gilbert
2020-01-12 23:57 ` [PATCH v6 02/37] sg: remove typedefs, type+formatting cleanup Douglas Gilbert
2020-01-12 23:57 ` [PATCH v6 03/37] sg: sg_log and is_enabled Douglas Gilbert
2020-01-12 23:57 ` [PATCH v6 04/37] sg: rework sg_poll(), minor changes Douglas Gilbert
2020-01-12 23:57 ` [PATCH v6 05/37] sg: bitops in sg_device Douglas Gilbert
2020-01-12 23:57 ` [PATCH v6 06/37] sg: make open count an atomic Douglas Gilbert
2020-01-12 23:57 ` [PATCH v6 07/37] sg: move header to uapi section Douglas Gilbert
2020-01-13 5:34 ` kbuild test robot
2020-01-14 9:16 ` Douglas Gilbert
2020-01-12 23:57 ` [PATCH v6 08/37] sg: speed sg_poll and sg_get_num_waiting Douglas Gilbert
2020-01-12 23:57 ` [PATCH v6 09/37] sg: sg_allow_if_err_recovery and renames Douglas Gilbert
2020-01-12 23:57 ` [PATCH v6 10/37] sg: improve naming Douglas Gilbert
2020-01-12 23:57 ` [PATCH v6 11/37] sg: change rwlock to spinlock Douglas Gilbert
2020-01-12 23:57 ` [PATCH v6 12/37] sg: ioctl handling Douglas Gilbert
2020-01-12 23:57 ` [PATCH v6 13/37] sg: split sg_read Douglas Gilbert
2020-01-12 23:57 ` [PATCH v6 14/37] sg: sg_common_write add structure for arguments Douglas Gilbert
2020-01-12 23:57 ` [PATCH v6 15/37] sg: rework sg_vma_fault Douglas Gilbert
2020-01-12 23:57 ` [PATCH v6 16/37] sg: rework sg_mmap Douglas Gilbert
2020-01-12 23:57 ` [PATCH v6 17/37] sg: replace sg_allow_access Douglas Gilbert
2020-01-12 23:57 ` [PATCH v6 18/37] sg: rework scatter gather handling Douglas Gilbert
2020-01-12 23:57 ` [PATCH v6 19/37] sg: introduce request state machine Douglas Gilbert
2020-01-12 23:57 ` [PATCH v6 20/37] sg: sg_find_srp_by_id Douglas Gilbert
2020-01-12 23:57 ` [PATCH v6 21/37] sg: sg_fill_request_element Douglas Gilbert
2020-01-12 23:57 ` [PATCH v6 22/37] sg: printk change %p to %pK Douglas Gilbert
2020-01-12 23:57 ` [PATCH v6 23/37] sg: xarray for fds in device Douglas Gilbert
2020-01-12 23:57 ` [PATCH v6 24/37] sg: xarray for reqs in fd Douglas Gilbert
2020-01-12 23:57 ` [PATCH v6 25/37] sg: replace rq array with lists Douglas Gilbert
2020-01-12 23:57 ` [PATCH v6 26/37] sg: sense buffer rework Douglas Gilbert
2020-01-12 23:57 ` [PATCH v6 27/37] sg: add sg v4 interface support Douglas Gilbert
2020-01-13 8:28 ` kbuild test robot
2020-01-14 10:21 ` Douglas Gilbert
2020-01-12 23:57 ` [PATCH v6 28/37] sg: rework debug info Douglas Gilbert
2020-01-12 23:57 ` [PATCH v6 29/37] sg: add 8 byte SCSI LUN to sg_scsi_id Douglas Gilbert
2020-01-12 23:57 ` [PATCH v6 30/37] sg: expand sg_comm_wr_t Douglas Gilbert
2020-01-12 23:57 ` [PATCH v6 31/37] sg: add sg_iosubmit_v3 and sg_ioreceive_v3 ioctls Douglas Gilbert
2020-01-13 0:50 ` Bart Van Assche
2020-01-13 10:39 ` Douglas Gilbert
2020-01-12 23:57 ` [PATCH v6 32/37] sg: add some __must_hold macros Douglas Gilbert
2020-01-12 23:57 ` Douglas Gilbert [this message]
2020-01-12 23:57 ` [PATCH v6 34/37] sg: protect multiple receivers Douglas Gilbert
2020-01-12 23:57 ` [PATCH v6 35/37] sg: first debugfs support Douglas Gilbert
2020-01-12 23:57 ` [PATCH v6 36/37] sg: warn v3 write system call users Douglas Gilbert
2020-01-12 23:57 ` [PATCH v6 37/37] sg: bump version to 4.0.08 Douglas Gilbert
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200112235755.14197-34-dgilbert@interlog.com \
--to=dgilbert@interlog.com \
--cc=hare@suse.de \
--cc=jejb@linux.vnet.ibm.com \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).