From: Thomas Bogendoerfer <tbogendoerfer@suse.de>
To: Michael Reed <mdr@sgi.com>,
"James E.J. Bottomley" <jejb@linux.ibm.com>,
"Martin K. Petersen" <martin.petersen@oracle.com>,
linux-scsi@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH] scsi: qla1280: Fix dma firmware download, if dma address is 64bit
Date: Tue, 14 Jan 2020 17:09:36 +0100 [thread overview]
Message-ID: <20200114160936.1517-1-tbogendoerfer@suse.de> (raw)
Do firmware download with 64bit LOAD_RAM command, if driver is using
64bit addressing.
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
---
drivers/scsi/qla1280.c | 20 ++++++++++++++------
drivers/scsi/qla1280.h | 2 ++
2 files changed, 16 insertions(+), 6 deletions(-)
diff --git a/drivers/scsi/qla1280.c b/drivers/scsi/qla1280.c
index 832af4213046..607cbddcdd14 100644
--- a/drivers/scsi/qla1280.c
+++ b/drivers/scsi/qla1280.c
@@ -1699,6 +1699,16 @@ qla1280_load_firmware_pio(struct scsi_qla_host *ha)
return err;
}
+#if QLA_64BIT_PTR
+#define LOAD_CMD MBC_LOAD_RAM_A64_ROM
+#define DUMP_CMD MBC_DUMP_RAM_A64_ROM
+#define CMD_ARGS (BIT_7 | BIT_6 | BIT_4 | BIT_3 | BIT_2 | BIT_1 | BIT_0)
+#else
+#define LOAD_CMD MBC_LOAD_RAM
+#define DUMP_CMD MBC_DUMP_RAM
+#define CMD_ARGS (BIT_4 | BIT_3 | BIT_2 | BIT_1 | BIT_0)
+#endif
+
#define DUMP_IT_BACK 0 /* for debug of RISC loading */
static int
qla1280_load_firmware_dma(struct scsi_qla_host *ha)
@@ -1748,7 +1758,7 @@ qla1280_load_firmware_dma(struct scsi_qla_host *ha)
for(i = 0; i < cnt; i++)
((__le16 *)ha->request_ring)[i] = fw_data[i];
- mb[0] = MBC_LOAD_RAM;
+ mb[0] = LOAD_CMD;
mb[1] = risc_address;
mb[4] = cnt;
mb[3] = ha->request_dma & 0xffff;
@@ -1759,8 +1769,7 @@ qla1280_load_firmware_dma(struct scsi_qla_host *ha)
__func__, mb[0],
(void *)(long)ha->request_dma,
mb[6], mb[7], mb[2], mb[3]);
- err = qla1280_mailbox_command(ha, BIT_4 | BIT_3 | BIT_2 |
- BIT_1 | BIT_0, mb);
+ err = qla1280_mailbox_command(ha, CMD_ARGS, mb);
if (err) {
printk(KERN_ERR "scsi(%li): Failed to load partial "
"segment of f\n", ha->host_no);
@@ -1768,7 +1777,7 @@ qla1280_load_firmware_dma(struct scsi_qla_host *ha)
}
#if DUMP_IT_BACK
- mb[0] = MBC_DUMP_RAM;
+ mb[0] = DUMP_CMD;
mb[1] = risc_address;
mb[4] = cnt;
mb[3] = p_tbuf & 0xffff;
@@ -1776,8 +1785,7 @@ qla1280_load_firmware_dma(struct scsi_qla_host *ha)
mb[7] = upper_32_bits(p_tbuf) & 0xffff;
mb[6] = upper_32_bits(p_tbuf) >> 16;
- err = qla1280_mailbox_command(ha, BIT_4 | BIT_3 | BIT_2 |
- BIT_1 | BIT_0, mb);
+ err = qla1280_mailbox_command(ha, CMD_ARGS, mb);
if (err) {
printk(KERN_ERR
"Failed to dump partial segment of f/w\n");
diff --git a/drivers/scsi/qla1280.h b/drivers/scsi/qla1280.h
index a1a8aefc7cc3..e7820b5bca38 100644
--- a/drivers/scsi/qla1280.h
+++ b/drivers/scsi/qla1280.h
@@ -277,6 +277,8 @@ struct device_reg {
#define MBC_MAILBOX_REGISTER_TEST 6 /* Wrap incoming mailboxes */
#define MBC_VERIFY_CHECKSUM 7 /* Verify checksum */
#define MBC_ABOUT_FIRMWARE 8 /* Get firmware revision */
+#define MBC_LOAD_RAM_A64_ROM 9 /* Load RAM 64bit ROM version */
+#define MBC_DUMP_RAM_A64_ROM 0x0a /* Dump RAM 64bit ROM version */
#define MBC_INIT_REQUEST_QUEUE 0x10 /* Initialize request queue */
#define MBC_INIT_RESPONSE_QUEUE 0x11 /* Initialize response queue */
#define MBC_EXECUTE_IOCB 0x12 /* Execute IOCB command */
--
2.24.1
next reply other threads:[~2020-01-14 16:09 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-14 16:09 Thomas Bogendoerfer [this message]
2020-01-16 4:09 ` [PATCH] scsi: qla1280: Fix dma firmware download, if dma address is 64bit Martin K. Petersen
2020-01-16 11:43 ` Thomas Bogendoerfer
2020-01-17 1:29 ` Martin K. Petersen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200114160936.1517-1-tbogendoerfer@suse.de \
--to=tbogendoerfer@suse.de \
--cc=jejb@linux.ibm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
--cc=mdr@sgi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).