[PATCH AUTOSEL 4.14 132/371] scsi: megaraid_sas: reduce module load time

[PATCH AUTOSEL 4.14 132/371] scsi: megaraid_sas: reduce module load time

[Sasha Levin]

From: Steve Sistare <steven.sistare@oracle.com>

[ Upstream commit 31b6a05f86e690e1818116fd23c3be915cc9d9ed ]

megaraid_sas takes 1+ seconds to load while waiting for firmware:

[2.822603] megaraid_sas 0000:03:00.0: Waiting for FW to come to ready state
[3.871003] megaraid_sas 0000:03:00.0: FW now in Ready state

This is due to the following loop in megasas_transition_to_ready(), which
waits a minimum of 1 second, even though the FW becomes ready in tens of
millisecs:

        /*
         * The cur_state should not last for more than max_wait secs
         */
        for (i = 0; i < max_wait; i++) {
                ...
                msleep(1000);
        ...
        dev_info(&instance->pdev->dev, "FW now in Ready state\n");

This is a regression, caused by a change of the msleep granularity from 1
to 1000 due to concern about waiting too long on systems with coarse
jiffies.

To fix, increase iterations and use msleep(20), which results in:

[2.670627] megaraid_sas 0000:03:00.0: Waiting for FW to come to ready state
[2.739386] megaraid_sas 0000:03:00.0: FW now in Ready state

Fixes: fb2f3e96d80f ("scsi: megaraid_sas: Fix msleep granularity")
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Acked-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/megaraid/megaraid_sas_base.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c
index 577513649afb..6abad63b127a 100644
--- a/drivers/scsi/megaraid/megaraid_sas_base.c
+++ b/drivers/scsi/megaraid/megaraid_sas_base.c
@@ -3823,12 +3823,12 @@ megasas_transition_to_ready(struct megasas_instance *instance, int ocr)
 		/*
 		 * The cur_state should not last for more than max_wait secs
 		 */
-		for (i = 0; i < max_wait; i++) {
+		for (i = 0; i < max_wait * 50; i++) {
 			curr_abs_state = instance->instancet->
 				read_fw_status_reg(instance->reg_set);
 
 			if (abs_state == curr_abs_state) {
-				msleep(1000);
+				msleep(20);
 			} else
 				break;
 		}
-- 
2.20.1

[PATCH AUTOSEL 4.14 158/371] scsi: qla2xxx: Unregister chrdev if module initialization fails

[Sasha Levin]

From: Bart Van Assche <bvanassche@acm.org>

[ Upstream commit c794d24ec9eb6658909955772e70f34bef5b5b91 ]

If module initialization fails after the character device has been
registered, unregister the character device. Additionally, avoid
duplicating error path code.

Cc: Himanshu Madhani <hmadhani@marvell.com>
Cc: Giridhar Malavali <giridhar.malavali@qlogic.com>
Fixes: 6a03b4cd78f3 ("[SCSI] qla2xxx: Add char device to increase driver use count") # v2.6.35.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/qla2xxx/qla_os.c | 34 +++++++++++++++++++++-------------
 1 file changed, 21 insertions(+), 13 deletions(-)

diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 5617bb18c233..5f9d4dbc4a98 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -6714,8 +6714,7 @@ qla2x00_module_init(void)
 	/* Initialize target kmem_cache and mem_pools */
 	ret = qlt_init();
 	if (ret < 0) {
-		kmem_cache_destroy(srb_cachep);
-		return ret;
+		goto destroy_cache;
 	} else if (ret > 0) {
 		/*
 		 * If initiator mode is explictly disabled by qlt_init(),
@@ -6736,11 +6735,10 @@ qla2x00_module_init(void)
 	qla2xxx_transport_template =
 	    fc_attach_transport(&qla2xxx_transport_functions);
 	if (!qla2xxx_transport_template) {
-		kmem_cache_destroy(srb_cachep);
 		ql_log(ql_log_fatal, NULL, 0x0002,
 		    "fc_attach_transport failed...Failing load!.\n");
-		qlt_exit();
-		return -ENODEV;
+		ret = -ENODEV;
+		goto qlt_exit;
 	}
 
 	apidev_major = register_chrdev(0, QLA2XXX_APIDEV, &apidev_fops);
@@ -6752,27 +6750,37 @@ qla2x00_module_init(void)
 	qla2xxx_transport_vport_template =
 	    fc_attach_transport(&qla2xxx_transport_vport_functions);
 	if (!qla2xxx_transport_vport_template) {
-		kmem_cache_destroy(srb_cachep);
-		qlt_exit();
-		fc_release_transport(qla2xxx_transport_template);
 		ql_log(ql_log_fatal, NULL, 0x0004,
 		    "fc_attach_transport vport failed...Failing load!.\n");
-		return -ENODEV;
+		ret = -ENODEV;
+		goto unreg_chrdev;
 	}
 	ql_log(ql_log_info, NULL, 0x0005,
 	    "QLogic Fibre Channel HBA Driver: %s.\n",
 	    qla2x00_version_str);
 	ret = pci_register_driver(&qla2xxx_pci_driver);
 	if (ret) {
-		kmem_cache_destroy(srb_cachep);
-		qlt_exit();
-		fc_release_transport(qla2xxx_transport_template);
-		fc_release_transport(qla2xxx_transport_vport_template);
 		ql_log(ql_log_fatal, NULL, 0x0006,
 		    "pci_register_driver failed...ret=%d Failing load!.\n",
 		    ret);
+		goto release_vport_transport;
 	}
 	return ret;
+
+release_vport_transport:
+	fc_release_transport(qla2xxx_transport_vport_template);
+
+unreg_chrdev:
+	if (apidev_major >= 0)
+		unregister_chrdev(apidev_major, QLA2XXX_APIDEV);
+	fc_release_transport(qla2xxx_transport_template);
+
+qlt_exit:
+	qlt_exit();
+
+destroy_cache:
+	kmem_cache_destroy(srb_cachep);
+	return ret;
 }
 
 /**
-- 
2.20.1

[PATCH AUTOSEL 4.14 159/371] scsi: target/core: Fix a race condition in the LUN lookup code

[Sasha Levin]

From: Bart Van Assche <bvanassche@acm.org>

[ Upstream commit 63f7479439c95bcd49b7dd4af809862c316c71a3 ]

The rcu_dereference(deve->se_lun) expression occurs twice in the LUN lookup
functions. Since these expressions are not serialized against deve->se_lun
assignments each of these expressions may yield a different result. Avoid
that the wrong LUN pointer is stored in se_cmd by reading deve->se_lun only
once.

Cc: Mike Christie <mchristi@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Fixes: 29a05deebf6c ("target: Convert se_node_acl->device_list[] to RCU hlist") # v4.10
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/target/target_core_device.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/target/target_core_device.c b/drivers/target/target_core_device.c
index 92b52d2314b5..cebef8e5a43d 100644
--- a/drivers/target/target_core_device.c
+++ b/drivers/target/target_core_device.c
@@ -85,7 +85,7 @@ transport_lookup_cmd_lun(struct se_cmd *se_cmd, u64 unpacked_lun)
 			goto out_unlock;
 		}
 
-		se_cmd->se_lun = rcu_dereference(deve->se_lun);
+		se_cmd->se_lun = se_lun;
 		se_cmd->pr_res_key = deve->pr_res_key;
 		se_cmd->orig_fe_lun = unpacked_lun;
 		se_cmd->se_cmd_flags |= SCF_SE_LUN_CMD;
@@ -176,7 +176,7 @@ int transport_lookup_tmr_lun(struct se_cmd *se_cmd, u64 unpacked_lun)
 			goto out_unlock;
 		}
 
-		se_cmd->se_lun = rcu_dereference(deve->se_lun);
+		se_cmd->se_lun = se_lun;
 		se_cmd->pr_res_key = deve->pr_res_key;
 		se_cmd->orig_fe_lun = unpacked_lun;
 		se_cmd->se_cmd_flags |= SCF_SE_LUN_CMD;
-- 
2.20.1

[PATCH AUTOSEL 4.14 174/371] scsi: qla2xxx: Fix a format specifier

[Sasha Levin]

From: Bart Van Assche <bvanassche@acm.org>

[ Upstream commit 19ce192cd718e02f880197c0983404ca48236807 ]

Since mcmd->sess->port_name is eight bytes long, use %8phC to format that
port name instead of %phC.

Cc: Himanshu Madhani <hmadhani@marvell.com>
Cc: Giridhar Malavali <gmalavali@marvell.com>
Fixes: 726b85487067 ("qla2xxx: Add framework for async fabric discovery") # v4.11.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/qla2xxx/qla_target.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/qla2xxx/qla_target.c b/drivers/scsi/qla2xxx/qla_target.c
index 55227d20496a..1000422ef4f8 100644
--- a/drivers/scsi/qla2xxx/qla_target.c
+++ b/drivers/scsi/qla2xxx/qla_target.c
@@ -2179,7 +2179,7 @@ void qlt_xmit_tm_rsp(struct qla_tgt_mgmt_cmd *mcmd)
 		    mcmd->orig_iocb.imm_ntfy.u.isp24.status_subcode ==
 		    ELS_TPRLO) {
 			ql_dbg(ql_dbg_disc, vha, 0x2106,
-			    "TM response logo %phC status %#x state %#x",
+			    "TM response logo %8phC status %#x state %#x",
 			    mcmd->sess->port_name, mcmd->fc_tm_rsp,
 			    mcmd->flags);
 			qlt_schedule_sess_for_deletion_lock(mcmd->sess);
-- 
2.20.1

[PATCH AUTOSEL 4.14 175/371] scsi: qla2xxx: Avoid that qlt_send_resp_ctio() corrupts memory

[Sasha Levin]

From: Bart Van Assche <bvanassche@acm.org>

[ Upstream commit a861b49273578e255426a499842cf7f465456351 ]

The "(&ctio->u.status1.sense_data)[i]" where i >= 0 expressions in
qlt_send_resp_ctio() are probably typos and should have been
"(&ctio->u.status1.sense_data[4 * i])" instead. Instead of only fixing
these typos, modify the code for storing sense data such that it becomes
easy to read. This patch fixes a Coverity complaint about accessing an
array outside its bounds.

Cc: Himanshu Madhani <hmadhani@marvell.com>
Cc: Giridhar Malavali <gmalavali@marvell.com>
Fixes: be25152c0d9e ("qla2xxx: Improve T10-DIF/PI handling in driver.") # v4.11.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/qla2xxx/qla_target.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/scsi/qla2xxx/qla_target.c b/drivers/scsi/qla2xxx/qla_target.c
index 1000422ef4f8..21011c5fddeb 100644
--- a/drivers/scsi/qla2xxx/qla_target.c
+++ b/drivers/scsi/qla2xxx/qla_target.c
@@ -2122,14 +2122,14 @@ void qlt_send_resp_ctio(struct qla_qpair *qpair, struct qla_tgt_cmd *cmd,
 		ctio->u.status1.scsi_status |=
 		    cpu_to_le16(SS_RESIDUAL_UNDER);
 
-	/* Response code and sense key */
-	put_unaligned_le32(((0x70 << 24) | (sense_key << 8)),
-	    (&ctio->u.status1.sense_data)[0]);
+	/* Fixed format sense data. */
+	ctio->u.status1.sense_data[0] = 0x70;
+	ctio->u.status1.sense_data[2] = sense_key;
 	/* Additional sense length */
-	put_unaligned_le32(0x0a, (&ctio->u.status1.sense_data)[1]);
+	ctio->u.status1.sense_data[7] = 0xa;
 	/* ASC and ASCQ */
-	put_unaligned_le32(((asc << 24) | (ascq << 16)),
-	    (&ctio->u.status1.sense_data)[3]);
+	ctio->u.status1.sense_data[12] = asc;
+	ctio->u.status1.sense_data[13] = ascq;
 
 	/* Memory Barrier */
 	wmb();
-- 
2.20.1

[PATCH AUTOSEL 4.14 248/371] scsi: libfc: fix null pointer dereference on a null lport

[Sasha Levin]

From: Colin Ian King <colin.king@canonical.com>

[ Upstream commit 41a6bf6529edd10a6def42e3b2c34a7474bcc2f5 ]

Currently if lport is null then the null lport pointer is dereference when
printing out debug via the FC_LPORT_DB macro. Fix this by using the more
generic FC_LIBFC_DBG debug macro instead that does not use lport.

Addresses-Coverity: ("Dereference after null check")
Fixes: 7414705ea4ae ("libfc: Add runtime debugging with debug_logging module parameter")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/libfc/fc_exch.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/libfc/fc_exch.c b/drivers/scsi/libfc/fc_exch.c
index 42bcf7f3a0f9..6ba257cbc6d9 100644
--- a/drivers/scsi/libfc/fc_exch.c
+++ b/drivers/scsi/libfc/fc_exch.c
@@ -2603,7 +2603,7 @@ void fc_exch_recv(struct fc_lport *lport, struct fc_frame *fp)
 
 	/* lport lock ? */
 	if (!lport || lport->state == LPORT_ST_DISABLED) {
-		FC_LPORT_DBG(lport, "Receiving frames for an lport that "
+		FC_LIBFC_DBG("Receiving frames for an lport that "
 			     "has not been initialized correctly\n");
 		fc_frame_free(fp);
 		return;
-- 
2.20.1

[PATCH AUTOSEL 4.14 290/371] scsi: fnic: fix msix interrupt allocation

[Sasha Levin]

From: Govindarajulu Varadarajan <gvaradar@cisco.com>

[ Upstream commit 3ec24fb4c035e9cbb2f02a48640a09aa913442a2 ]

pci_alloc_irq_vectors() returns number of vectors allocated.  Fix the check
for error condition.

Fixes: cca678dfbad49 ("scsi: fnic: switch to pci_alloc_irq_vectors")
Link: https://lore.kernel.org/r/20190827211340.1095-1-gvaradar@cisco.com
Signed-off-by: Govindarajulu Varadarajan <gvaradar@cisco.com>
Acked-by: Satish Kharat <satishkh@cisco.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/fnic/fnic_isr.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/fnic/fnic_isr.c b/drivers/scsi/fnic/fnic_isr.c
index 4e3a50202e8c..d28088218c36 100644
--- a/drivers/scsi/fnic/fnic_isr.c
+++ b/drivers/scsi/fnic/fnic_isr.c
@@ -254,7 +254,7 @@ int fnic_set_intr_mode(struct fnic *fnic)
 		int vecs = n + m + o + 1;
 
 		if (pci_alloc_irq_vectors(fnic->pdev, vecs, vecs,
-				PCI_IRQ_MSIX) < 0) {
+				PCI_IRQ_MSIX) == vecs) {
 			fnic->rq_count = n;
 			fnic->raw_wq_count = m;
 			fnic->wq_copy_count = o;
@@ -280,7 +280,7 @@ int fnic_set_intr_mode(struct fnic *fnic)
 	    fnic->wq_copy_count >= 1 &&
 	    fnic->cq_count >= 3 &&
 	    fnic->intr_count >= 1 &&
-	    pci_alloc_irq_vectors(fnic->pdev, 1, 1, PCI_IRQ_MSI) < 0) {
+	    pci_alloc_irq_vectors(fnic->pdev, 1, 1, PCI_IRQ_MSI) == 1) {
 		fnic->rq_count = 1;
 		fnic->raw_wq_count = 1;
 		fnic->wq_copy_count = 1;
-- 
2.20.1

[PATCH AUTOSEL 4.14 339/371] scsi: esas2r: unlock on error in esas2r_nvram_read_direct()

[Sasha Levin]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit 906ca6353ac09696c1bf0892513c8edffff5e0a6 ]

This error path is missing an unlock.

Fixes: 26780d9e12ed ("[SCSI] esas2r: ATTO Technology ExpressSAS 6G SAS/SATA RAID Adapter Driver")
Link: https://lore.kernel.org/r/20191022102324.GA27540@mwanda
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/esas2r/esas2r_flash.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/scsi/esas2r/esas2r_flash.c b/drivers/scsi/esas2r/esas2r_flash.c
index 7bd376d95ed5..b02ac389e6c6 100644
--- a/drivers/scsi/esas2r/esas2r_flash.c
+++ b/drivers/scsi/esas2r/esas2r_flash.c
@@ -1197,6 +1197,7 @@ bool esas2r_nvram_read_direct(struct esas2r_adapter *a)
 	if (!esas2r_read_flash_block(a, a->nvram, FLS_OFFSET_NVR,
 				     sizeof(struct esas2r_sas_nvram))) {
 		esas2r_hdebug("NVRAM read failed, using defaults");
+		up(&a->nvram_semaphore);
 		return false;
 	}
 
-- 
2.20.1

[PATCH AUTOSEL 4.14 342/371] scsi: core: scsi_trace: Use get_unaligned_be*()

[Sasha Levin]

From: Bart Van Assche <bvanassche@acm.org>

[ Upstream commit b1335f5b0486f61fb66b123b40f8e7a98e49605d ]

This patch fixes an unintended sign extension on left shifts. From Colin
King: "Shifting a u8 left will cause the value to be promoted to an
integer. If the top bit of the u8 is set then the following conversion to
an u64 will sign extend the value causing the upper 32 bits to be set in
the result."

Fix this by using get_unaligned_be*() instead.

Fixes: bf8162354233 ("[SCSI] add scsi trace core functions and put trace points")
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Link: https://lore.kernel.org/r/20191101211447.187151-1-bvanassche@acm.org
Reported-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/scsi_trace.c | 113 +++++++++++---------------------------
 1 file changed, 33 insertions(+), 80 deletions(-)

diff --git a/drivers/scsi/scsi_trace.c b/drivers/scsi/scsi_trace.c
index 617a60737590..22472d140ef7 100644
--- a/drivers/scsi/scsi_trace.c
+++ b/drivers/scsi/scsi_trace.c
@@ -21,7 +21,7 @@
 #include <trace/events/scsi.h>
 
 #define SERVICE_ACTION16(cdb) (cdb[1] & 0x1f)
-#define SERVICE_ACTION32(cdb) ((cdb[8] << 8) | cdb[9])
+#define SERVICE_ACTION32(cdb) (get_unaligned_be16(&cdb[8]))
 
 static const char *
 scsi_trace_misc(struct trace_seq *, unsigned char *, int);
@@ -51,17 +51,12 @@ static const char *
 scsi_trace_rw10(struct trace_seq *p, unsigned char *cdb, int len)
 {
 	const char *ret = trace_seq_buffer_ptr(p);
-	sector_t lba = 0, txlen = 0;
+	u32 lba, txlen;
 
-	lba |= (cdb[2] << 24);
-	lba |= (cdb[3] << 16);
-	lba |= (cdb[4] << 8);
-	lba |=  cdb[5];
-	txlen |= (cdb[7] << 8);
-	txlen |=  cdb[8];
+	lba = get_unaligned_be32(&cdb[2]);
+	txlen = get_unaligned_be16(&cdb[7]);
 
-	trace_seq_printf(p, "lba=%llu txlen=%llu protect=%u",
-			 (unsigned long long)lba, (unsigned long long)txlen,
+	trace_seq_printf(p, "lba=%u txlen=%u protect=%u", lba, txlen,
 			 cdb[1] >> 5);
 
 	if (cdb[0] == WRITE_SAME)
@@ -76,19 +71,12 @@ static const char *
 scsi_trace_rw12(struct trace_seq *p, unsigned char *cdb, int len)
 {
 	const char *ret = trace_seq_buffer_ptr(p);
-	sector_t lba = 0, txlen = 0;
-
-	lba |= (cdb[2] << 24);
-	lba |= (cdb[3] << 16);
-	lba |= (cdb[4] << 8);
-	lba |=  cdb[5];
-	txlen |= (cdb[6] << 24);
-	txlen |= (cdb[7] << 16);
-	txlen |= (cdb[8] << 8);
-	txlen |=  cdb[9];
-
-	trace_seq_printf(p, "lba=%llu txlen=%llu protect=%u",
-			 (unsigned long long)lba, (unsigned long long)txlen,
+	u32 lba, txlen;
+
+	lba = get_unaligned_be32(&cdb[2]);
+	txlen = get_unaligned_be32(&cdb[6]);
+
+	trace_seq_printf(p, "lba=%u txlen=%u protect=%u", lba, txlen,
 			 cdb[1] >> 5);
 	trace_seq_putc(p, 0);
 
@@ -99,23 +87,13 @@ static const char *
 scsi_trace_rw16(struct trace_seq *p, unsigned char *cdb, int len)
 {
 	const char *ret = trace_seq_buffer_ptr(p);
-	sector_t lba = 0, txlen = 0;
-
-	lba |= ((u64)cdb[2] << 56);
-	lba |= ((u64)cdb[3] << 48);
-	lba |= ((u64)cdb[4] << 40);
-	lba |= ((u64)cdb[5] << 32);
-	lba |= (cdb[6] << 24);
-	lba |= (cdb[7] << 16);
-	lba |= (cdb[8] << 8);
-	lba |=  cdb[9];
-	txlen |= (cdb[10] << 24);
-	txlen |= (cdb[11] << 16);
-	txlen |= (cdb[12] << 8);
-	txlen |=  cdb[13];
-
-	trace_seq_printf(p, "lba=%llu txlen=%llu protect=%u",
-			 (unsigned long long)lba, (unsigned long long)txlen,
+	u64 lba;
+	u32 txlen;
+
+	lba = get_unaligned_be64(&cdb[2]);
+	txlen = get_unaligned_be32(&cdb[10]);
+
+	trace_seq_printf(p, "lba=%llu txlen=%u protect=%u", lba, txlen,
 			 cdb[1] >> 5);
 
 	if (cdb[0] == WRITE_SAME_16)
@@ -130,8 +108,8 @@ static const char *
 scsi_trace_rw32(struct trace_seq *p, unsigned char *cdb, int len)
 {
 	const char *ret = trace_seq_buffer_ptr(p), *cmd;
-	sector_t lba = 0, txlen = 0;
-	u32 ei_lbrt = 0;
+	u64 lba;
+	u32 ei_lbrt, txlen;
 
 	switch (SERVICE_ACTION32(cdb)) {
 	case READ_32:
@@ -151,26 +129,12 @@ scsi_trace_rw32(struct trace_seq *p, unsigned char *cdb, int len)
 		goto out;
 	}
 
-	lba |= ((u64)cdb[12] << 56);
-	lba |= ((u64)cdb[13] << 48);
-	lba |= ((u64)cdb[14] << 40);
-	lba |= ((u64)cdb[15] << 32);
-	lba |= (cdb[16] << 24);
-	lba |= (cdb[17] << 16);
-	lba |= (cdb[18] << 8);
-	lba |=  cdb[19];
-	ei_lbrt |= (cdb[20] << 24);
-	ei_lbrt |= (cdb[21] << 16);
-	ei_lbrt |= (cdb[22] << 8);
-	ei_lbrt |=  cdb[23];
-	txlen |= (cdb[28] << 24);
-	txlen |= (cdb[29] << 16);
-	txlen |= (cdb[30] << 8);
-	txlen |=  cdb[31];
-
-	trace_seq_printf(p, "%s_32 lba=%llu txlen=%llu protect=%u ei_lbrt=%u",
-			 cmd, (unsigned long long)lba,
-			 (unsigned long long)txlen, cdb[10] >> 5, ei_lbrt);
+	lba = get_unaligned_be64(&cdb[12]);
+	ei_lbrt = get_unaligned_be32(&cdb[20]);
+	txlen = get_unaligned_be32(&cdb[28]);
+
+	trace_seq_printf(p, "%s_32 lba=%llu txlen=%u protect=%u ei_lbrt=%u",
+			 cmd, lba, txlen, cdb[10] >> 5, ei_lbrt);
 
 	if (SERVICE_ACTION32(cdb) == WRITE_SAME_32)
 		trace_seq_printf(p, " unmap=%u", cdb[10] >> 3 & 1);
@@ -185,7 +149,7 @@ static const char *
 scsi_trace_unmap(struct trace_seq *p, unsigned char *cdb, int len)
 {
 	const char *ret = trace_seq_buffer_ptr(p);
-	unsigned int regions = cdb[7] << 8 | cdb[8];
+	unsigned int regions = get_unaligned_be16(&cdb[7]);
 
 	trace_seq_printf(p, "regions=%u", (regions - 8) / 16);
 	trace_seq_putc(p, 0);
@@ -197,8 +161,8 @@ static const char *
 scsi_trace_service_action_in(struct trace_seq *p, unsigned char *cdb, int len)
 {
 	const char *ret = trace_seq_buffer_ptr(p), *cmd;
-	sector_t lba = 0;
-	u32 alloc_len = 0;
+	u64 lba;
+	u32 alloc_len;
 
 	switch (SERVICE_ACTION16(cdb)) {
 	case SAI_READ_CAPACITY_16:
@@ -212,21 +176,10 @@ scsi_trace_service_action_in(struct trace_seq *p, unsigned char *cdb, int len)
 		goto out;
 	}
 
-	lba |= ((u64)cdb[2] << 56);
-	lba |= ((u64)cdb[3] << 48);
-	lba |= ((u64)cdb[4] << 40);
-	lba |= ((u64)cdb[5] << 32);
-	lba |= (cdb[6] << 24);
-	lba |= (cdb[7] << 16);
-	lba |= (cdb[8] << 8);
-	lba |=  cdb[9];
-	alloc_len |= (cdb[10] << 24);
-	alloc_len |= (cdb[11] << 16);
-	alloc_len |= (cdb[12] << 8);
-	alloc_len |=  cdb[13];
-
-	trace_seq_printf(p, "%s lba=%llu alloc_len=%u", cmd,
-			 (unsigned long long)lba, alloc_len);
+	lba = get_unaligned_be64(&cdb[2]);
+	alloc_len = get_unaligned_be32(&cdb[10]);
+
+	trace_seq_printf(p, "%s lba=%llu alloc_len=%u", cmd, lba, alloc_len);
 
 out:
 	trace_seq_putc(p, 0);
-- 
2.20.1

[PATCH AUTOSEL 4.14 357/371] scsi: qla4xxx: fix double free bug

[Sasha Levin]

From: Pan Bian <bianpan2016@163.com>

[ Upstream commit 3fe3d2428b62822b7b030577cd612790bdd8c941 ]

The variable init_fw_cb is released twice, resulting in a double free
bug. The call to the function dma_free_coherent() before goto is removed to
get rid of potential double free.

Fixes: 2a49a78ed3c8 ("[SCSI] qla4xxx: added IPv6 support.")
Link: https://lore.kernel.org/r/1572945927-27796-1-git-send-email-bianpan2016@163.com
Signed-off-by: Pan Bian <bianpan2016@163.com>
Acked-by: Manish Rangankar <mrangankar@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/qla4xxx/ql4_mbx.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/drivers/scsi/qla4xxx/ql4_mbx.c b/drivers/scsi/qla4xxx/ql4_mbx.c
index 1da04f323d38..c402fc583da3 100644
--- a/drivers/scsi/qla4xxx/ql4_mbx.c
+++ b/drivers/scsi/qla4xxx/ql4_mbx.c
@@ -641,9 +641,6 @@ int qla4xxx_initialize_fw_cb(struct scsi_qla_host * ha)
 
 	if (qla4xxx_get_ifcb(ha, &mbox_cmd[0], &mbox_sts[0], init_fw_cb_dma) !=
 	    QLA_SUCCESS) {
-		dma_free_coherent(&ha->pdev->dev,
-				  sizeof(struct addr_ctrl_blk),
-				  init_fw_cb, init_fw_cb_dma);
 		goto exit_init_fw_cb;
 	}
 
-- 
2.20.1

[PATCH AUTOSEL 4.14 358/371] scsi: bnx2i: fix potential use after free

[Sasha Levin]

From: Pan Bian <bianpan2016@163.com>

[ Upstream commit 29d28f2b8d3736ac61c28ef7e20fda63795b74d9 ]

The member hba->pcidev may be used after its reference is dropped. Move the
put function to where it is never used to avoid potential use after free
issues.

Fixes: a77171806515 ("[SCSI] bnx2i: Removed the reference to the netdev->base_addr")
Link: https://lore.kernel.org/r/1573043541-19126-1-git-send-email-bianpan2016@163.com
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/bnx2i/bnx2i_iscsi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/bnx2i/bnx2i_iscsi.c b/drivers/scsi/bnx2i/bnx2i_iscsi.c
index 03c104b47f31..b832bd0ce202 100644
--- a/drivers/scsi/bnx2i/bnx2i_iscsi.c
+++ b/drivers/scsi/bnx2i/bnx2i_iscsi.c
@@ -915,12 +915,12 @@ void bnx2i_free_hba(struct bnx2i_hba *hba)
 	INIT_LIST_HEAD(&hba->ep_ofld_list);
 	INIT_LIST_HEAD(&hba->ep_active_list);
 	INIT_LIST_HEAD(&hba->ep_destroy_list);
-	pci_dev_put(hba->pcidev);
 
 	if (hba->regview) {
 		pci_iounmap(hba->pcidev, hba->regview);
 		hba->regview = NULL;
 	}
+	pci_dev_put(hba->pcidev);
 	bnx2i_free_mp_bdt(hba);
 	bnx2i_release_free_cid_que(hba);
 	iscsi_host_free(shost);
-- 
2.20.1

[PATCH AUTOSEL 4.14 359/371] scsi: target: core: Fix a pr_debug() argument

[Sasha Levin]

From: Bart Van Assche <bvanassche@acm.org>

[ Upstream commit c941e0d172605731de9b4628bd4146d35cf2e7d6 ]

Print the string for which conversion failed instead of printing the
function name twice.

Fixes: 2650d71e244f ("target: move transport ID handling to the core")
Cc: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20191107215525.64415-1-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/target/target_core_fabric_lib.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/target/target_core_fabric_lib.c b/drivers/target/target_core_fabric_lib.c
index 508da345b73f..95aa47ac4dcd 100644
--- a/drivers/target/target_core_fabric_lib.c
+++ b/drivers/target/target_core_fabric_lib.c
@@ -131,7 +131,7 @@ static int srp_get_pr_transport_id(
 	memset(buf + 8, 0, leading_zero_bytes);
 	rc = hex2bin(buf + 8 + leading_zero_bytes, p, count);
 	if (rc < 0) {
-		pr_debug("hex2bin failed for %s: %d\n", __func__, rc);
+		pr_debug("hex2bin failed for %s: %d\n", p, rc);
 		return rc;
 	}
 
-- 
2.20.1

[PATCH AUTOSEL 4.14 365/371] scsi: qla2xxx: fix rports not being mark as lost in sync fabric scan

[Sasha Levin]

From: Martin Wilck <mwilck@suse.com>

[ Upstream commit d341e9a8f2cffe4000c610225c629f62c7489c74 ]

In qla2x00_find_all_fabric_devs(), fcport->flags & FCF_LOGIN_NEEDED is a
necessary condition for logging into new rports, but not for dropping lost
ones.

Fixes: 726b85487067 ("qla2xxx: Add framework for async fabric discovery")
Link: https://lore.kernel.org/r/20191122221912.20100-2-martin.wilck@suse.com
Tested-by: David Bond <dbond@suse.com>
Signed-off-by: Martin Wilck <mwilck@suse.com>
Acked-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/qla2xxx/qla_init.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index bd2421863510..a66f7cec797c 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -5145,8 +5145,7 @@ qla2x00_find_all_fabric_devs(scsi_qla_host_t *vha)
 		if (test_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags))
 			break;
 
-		if ((fcport->flags & FCF_FABRIC_DEVICE) == 0 ||
-		    (fcport->flags & FCF_LOGIN_NEEDED) == 0)
+		if ((fcport->flags & FCF_FABRIC_DEVICE) == 0)
 			continue;
 
 		if (fcport->scan_state == QLA_FCPORT_SCAN) {
@@ -5171,7 +5170,8 @@ qla2x00_find_all_fabric_devs(scsi_qla_host_t *vha)
 			}
 		}
 
-		if (fcport->scan_state == QLA_FCPORT_FOUND)
+		if (fcport->scan_state == QLA_FCPORT_FOUND &&
+		    (fcport->flags & FCF_LOGIN_NEEDED) != 0)
 			qla24xx_fcport_handle_login(vha, fcport);
 	}
 	return (rval);
-- 
2.20.1

[PATCH AUTOSEL 4.14 366/371] scsi: qla2xxx: Fix qla2x00_request_irqs() for MSI

[Sasha Levin]

From: Huacai Chen <chenhc@lemote.com>

[ Upstream commit 45dc8f2d9c94ed74a5e31e63e9136a19a7e16081 ]

Commit 4fa183455988 ("scsi: qla2xxx: Utilize pci_alloc_irq_vectors/
pci_free_irq_vectors calls.") use pci_alloc_irq_vectors() to replace
pci_enable_msi() but it didn't handle the return value correctly. This bug
make qla2x00 always fail to setup MSI if MSI-X fail, so fix it.

BTW, improve the log message of return value in qla2x00_request_irqs() to
avoid confusion.

Fixes: 4fa183455988 ("scsi: qla2xxx: Utilize pci_alloc_irq_vectors/pci_free_irq_vectors calls.")
Cc: Michael Hernandez <michael.hernandez@cavium.com>
Link: https://lore.kernel.org/r/1574314847-14280-1-git-send-email-chenhc@lemote.com
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Acked-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/qla2xxx/qla_isr.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index 7f2da56274bd..648916a9082c 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -3519,7 +3519,7 @@ qla2x00_request_irqs(struct qla_hw_data *ha, struct rsp_que *rsp)
 skip_msix:
 
 	ql_log(ql_log_info, vha, 0x0037,
-	    "Falling back-to MSI mode -%d.\n", ret);
+	    "Falling back-to MSI mode -- ret=%d.\n", ret);
 
 	if (!IS_QLA24XX(ha) && !IS_QLA2532(ha) && !IS_QLA8432(ha) &&
 	    !IS_QLA8001(ha) && !IS_P3P_TYPE(ha) && !IS_QLAFX00(ha) &&
@@ -3527,13 +3527,13 @@ qla2x00_request_irqs(struct qla_hw_data *ha, struct rsp_que *rsp)
 		goto skip_msi;
 
 	ret = pci_alloc_irq_vectors(ha->pdev, 1, 1, PCI_IRQ_MSI);
-	if (!ret) {
+	if (ret > 0) {
 		ql_dbg(ql_dbg_init, vha, 0x0038,
 		    "MSI: Enabled.\n");
 		ha->flags.msi_enabled = 1;
 	} else
 		ql_log(ql_log_warn, vha, 0x0039,
-		    "Falling back-to INTa mode -- %d.\n", ret);
+		    "Falling back-to INTa mode -- ret=%d.\n", ret);
 skip_msi:
 
 	/* Skip INTx on ISP82xx. */
-- 
2.20.1