[PATCH v2 08/15] scsi: mpt3sas_scsih: use generic power management

[Vaibhav Gupta <vaibhavgupta40@gmail.com>]

With legacy PM, drivers themselves were responsible for managing the
device's power states and takes care of register states.

After upgrading to the generic structure, PCI core will take care of
required tasks and drivers should do only device-specific operations.

The driver was calling pci_save/restore_state(), pci_choose_state(),
pci_enable/disable_device() and pci_set_power_state() which is no more
needed.

Compile-tested only.

Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
---
 drivers/scsi/mpt3sas/mpt3sas_scsih.c | 36 +++++++++++-----------------
 1 file changed, 14 insertions(+), 22 deletions(-)

diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
index 08fc4b381056..f3c6e68b2921 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
@@ -10829,44 +10829,40 @@ _scsih_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	return rv;
 }
 
-#ifdef CONFIG_PM
 /**
  * scsih_suspend - power management suspend main entry point
- * @pdev: PCI device struct
- * @state: PM state change to (usually PCI_D3)
+ * @dev: Device struct
  *
  * Return: 0 success, anything else error.
  */
-static int
-scsih_suspend(struct pci_dev *pdev, pm_message_t state)
+static int __maybe_unused
+scsih_suspend(struct device *dev)
 {
+	struct pci_dev *pdev = to_pci_dev(dev);
 	struct Scsi_Host *shost = pci_get_drvdata(pdev);
 	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
-	pci_power_t device_state;
 
 	mpt3sas_base_stop_watchdog(ioc);
 	flush_scheduled_work();
 	scsi_block_requests(shost);
 	_scsih_nvme_shutdown(ioc);
-	device_state = pci_choose_state(pdev, state);
-	ioc_info(ioc, "pdev=0x%p, slot=%s, entering operating state [D%d]\n",
-		 pdev, pci_name(pdev), device_state);
+	ioc_info(ioc, "pdev=0x%p, slot=%s, entering suspended state\n",
+		 pdev, pci_name(pdev));
 
-	pci_save_state(pdev);
 	mpt3sas_base_free_resources(ioc);
-	pci_set_power_state(pdev, device_state);
 	return 0;
 }
 
 /**
  * scsih_resume - power management resume main entry point
- * @pdev: PCI device struct
+ * @dev: Device struct
  *
  * Return: 0 success, anything else error.
  */
-static int
-scsih_resume(struct pci_dev *pdev)
+static int __maybe_unused
+scsih_resume(struct device *dev)
 {
+	struct pci_dev *pdev = to_pci_dev(dev);
 	struct Scsi_Host *shost = pci_get_drvdata(pdev);
 	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
 	pci_power_t device_state = pdev->current_state;
@@ -10875,9 +10871,7 @@ scsih_resume(struct pci_dev *pdev)
 	ioc_info(ioc, "pdev=0x%p, slot=%s, previous operating state [D%d]\n",
 		 pdev, pci_name(pdev), device_state);
 
-	pci_set_power_state(pdev, PCI_D0);
-	pci_enable_wake(pdev, PCI_D0, 0);
-	pci_restore_state(pdev);
+	device_wakeup_disable(dev);
 	ioc->pdev = pdev;
 	r = mpt3sas_base_map_resources(ioc);
 	if (r)
@@ -10888,7 +10882,6 @@ scsih_resume(struct pci_dev *pdev)
 	mpt3sas_base_start_watchdog(ioc);
 	return 0;
 }
-#endif /* CONFIG_PM */
 
 /**
  * scsih_pci_error_detected - Called when a PCI error is detected.
@@ -11162,6 +11155,8 @@ static struct pci_error_handlers _mpt3sas_err_handler = {
 	.resume		= scsih_pci_resume,
 };
 
+static SIMPLE_DEV_PM_OPS(scsih_pm_ops, scsih_suspend, scsih_resume);
+
 static struct pci_driver mpt3sas_driver = {
 	.name		= MPT3SAS_DRIVER_NAME,
 	.id_table	= mpt3sas_pci_table,
@@ -11169,10 +11164,7 @@ static struct pci_driver mpt3sas_driver = {
 	.remove		= scsih_remove,
 	.shutdown	= scsih_shutdown,
 	.err_handler	= &_mpt3sas_err_handler,
-#ifdef CONFIG_PM
-	.suspend	= scsih_suspend,
-	.resume		= scsih_resume,
-#endif
+	.driver.pm	= &scsih_pm_ops,
 };
 
 /**
-- 
2.27.0