From: Suraj Upadhyay <usuraj35@gmail.com>
To: oliver@neukum.org, aliakc@web.de, lenehan@twibble.org,
jejb@linux.ibm.com, don.brace@microsemi.com
Cc: dc395x@twibble.org, linux-scsi@vger.kernel.org,
linux-kernel@vger.kernel.org, esc.storagedev@microsemi.com
Subject: [PATCH RESEND] scsi: hpsa and dc395x: Remove pci_dma_compat wrapper APIs.
Date: Mon, 27 Jul 2020 19:37:18 +0530 [thread overview]
Message-ID: <20200727140718.GB14759@blackclown> (raw)
[-- Attachment #1: Type: text/plain, Size: 5120 bytes --]
The legacy API wrappers in include/linux/pci-dma-compat.h
should go away as it creates unnecessary midlayering
for include/linux/dma-mapping.h APIs, instead use dma-mapping.h
APIs directly.
The patch has been generated with the coccinelle script below
and compile-tested.
@@@@
- PCI_DMA_BIDIRECTIONAL
+ DMA_BIDIRECTIONAL
@@@@
- PCI_DMA_TODEVICE
+ DMA_TO_DEVICE
@@@@
- PCI_DMA_FROMDEVICE
+ DMA_FROM_DEVICE
@@@@
- PCI_DMA_NONE
+ DMA_NONE
@@ expression E1, E2, E3; @@
- pci_alloc_consistent(E1, E2, E3)
+ dma_alloc_coherent(&E1->dev, E2, E3, GFP_)
@@ expression E1, E2, E3; @@
- pci_zalloc_consistent(E1, E2, E3)
+ dma_alloc_coherent(&E1->dev, E2, E3, GFP_)
@@ expression E1, E2, E3, E4; @@
- pci_free_consistent(E1, E2, E3, E4)
+ dma_free_coherent(&E1->dev, E2, E3, E4)
@@ expression E1, E2, E3, E4; @@
- pci_map_single(E1, E2, E3, E4)
+ dma_map_single(&E1->dev, E2, E3, E4)
@@ expression E1, E2, E3, E4; @@
- pci_unmap_single(E1, E2, E3, E4)
+ dma_unmap_single(&E1->dev, E2, E3, E4)
@@ expression E1, E2, E3, E4, E5; @@
- pci_map_page(E1, E2, E3, E4, E5)
+ dma_map_page(&E1->dev, E2, E3, E4, E5)
@@ expression E1, E2, E3, E4; @@
- pci_unmap_page(E1, E2, E3, E4)
+ dma_unmap_page(&E1->dev, E2, E3, E4)
@@ expression E1, E2, E3, E4; @@
- pci_map_sg(E1, E2, E3, E4)
+ dma_map_sg(&E1->dev, E2, E3, E4)
@@ expression E1, E2, E3, E4; @@
- pci_unmap_sg(E1, E2, E3, E4)
+ dma_unmap_sg(&E1->dev, E2, E3, E4)
@@ expression E1, E2, E3, E4; @@
- pci_dma_sync_single_for_cpu(E1, E2, E3, E4)
+ dma_sync_single_for_cpu(&E1->dev, E2, E3, E4)
@@ expression E1, E2, E3, E4; @@
- pci_dma_sync_single_for_device(E1, E2, E3, E4)
+ dma_sync_single_for_device(&E1->dev, E2, E3, E4)
@@ expression E1, E2, E3, E4; @@
- pci_dma_sync_sg_for_cpu(E1, E2, E3, E4)
+ dma_sync_sg_for_cpu(&E1->dev, E2, E3, E4)
@@ expression E1, E2, E3, E4; @@
- pci_dma_sync_sg_for_device(E1, E2, E3, E4)
+ dma_sync_sg_for_device(&E1->dev, E2, E3, E4)
@@ expression E1, E2; @@
- pci_dma_mapping_error(E1, E2)
+ dma_mapping_error(&E1->dev, E2)
@@ expression E1, E2; @@
- pci_set_consistent_dma_mask(E1, E2)
+ dma_set_coherent_mask(&E1->dev, E2)
@@ expression E1, E2; @@
- pci_set_dma_mask(E1, E2)
+ dma_set_mask(&E1->dev, E2)
Signed-off-by: Suraj Upadhyay <usuraj35@gmail.com>
---
drivers/scsi/dc395x.c | 6 +++---
drivers/scsi/hpsa.c | 16 ++++++++--------
2 files changed, 11 insertions(+), 11 deletions(-)
diff --git a/drivers/scsi/dc395x.c b/drivers/scsi/dc395x.c
index 37c6cc374079..58d4acdb0447 100644
--- a/drivers/scsi/dc395x.c
+++ b/drivers/scsi/dc395x.c
@@ -902,7 +902,7 @@ static void build_srb(struct scsi_cmnd *cmd, struct DeviceCtlBlk *dcb,
nseg = scsi_dma_map(cmd);
BUG_ON(nseg < 0);
- if (dir == PCI_DMA_NONE || !nseg) {
+ if (dir == DMA_NONE || !nseg) {
dprintkdbg(DBG_0,
"build_srb: [0] len=%d buf=%p use_sg=%d !MAP=%08x\n",
cmd->bufflen, scsi_sglist(cmd), scsi_sg_count(cmd),
@@ -3135,7 +3135,7 @@ static void pci_unmap_srb(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb)
struct scsi_cmnd *cmd = srb->cmd;
enum dma_data_direction dir = cmd->sc_data_direction;
- if (scsi_sg_count(cmd) && dir != PCI_DMA_NONE) {
+ if (scsi_sg_count(cmd) && dir != DMA_NONE) {
/* unmap DC395x SG list */
dprintkdbg(DBG_SG, "pci_unmap_srb: list=%08x(%05x)\n",
srb->sg_bus_addr, SEGMENTX_LEN);
@@ -3333,7 +3333,7 @@ static void srb_done(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb,
if (!ckc_only && (cmd->result & RES_DID) == 0
&& cmd->cmnd[2] == 0 && scsi_bufflen(cmd) >= 8
- && dir != PCI_DMA_NONE && ptr && (ptr->Vers & 0x07) >= 2)
+ && dir != DMA_NONE && ptr && (ptr->Vers & 0x07) >= 2)
dcb->inquiry7 = ptr->Flags;
/*if( srb->cmd->cmnd[0] == INQUIRY && */
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index 81d0414e2117..ef90391a0269 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -9310,10 +9310,10 @@ static int hpsa_enter_performant_mode(struct ctlr_info *h, u32 trans_support)
static void hpsa_free_ioaccel1_cmd_and_bft(struct ctlr_info *h)
{
if (h->ioaccel_cmd_pool) {
- pci_free_consistent(h->pdev,
- h->nr_cmds * sizeof(*h->ioaccel_cmd_pool),
- h->ioaccel_cmd_pool,
- h->ioaccel_cmd_pool_dhandle);
+ dma_free_coherent(&h->pdev->dev,
+ h->nr_cmds * sizeof(*h->ioaccel_cmd_pool),
+ h->ioaccel_cmd_pool,
+ h->ioaccel_cmd_pool_dhandle);
h->ioaccel_cmd_pool = NULL;
h->ioaccel_cmd_pool_dhandle = 0;
}
@@ -9363,10 +9363,10 @@ static void hpsa_free_ioaccel2_cmd_and_bft(struct ctlr_info *h)
hpsa_free_ioaccel2_sg_chain_blocks(h);
if (h->ioaccel2_cmd_pool) {
- pci_free_consistent(h->pdev,
- h->nr_cmds * sizeof(*h->ioaccel2_cmd_pool),
- h->ioaccel2_cmd_pool,
- h->ioaccel2_cmd_pool_dhandle);
+ dma_free_coherent(&h->pdev->dev,
+ h->nr_cmds * sizeof(*h->ioaccel2_cmd_pool),
+ h->ioaccel2_cmd_pool,
+ h->ioaccel2_cmd_pool_dhandle);
h->ioaccel2_cmd_pool = NULL;
h->ioaccel2_cmd_pool_dhandle = 0;
}
--
2.17.1
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
reply other threads:[~2020-07-27 14:42 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200727140718.GB14759@blackclown \
--to=usuraj35@gmail.com \
--cc=aliakc@web.de \
--cc=dc395x@twibble.org \
--cc=don.brace@microsemi.com \
--cc=esc.storagedev@microsemi.com \
--cc=jejb@linux.ibm.com \
--cc=lenehan@twibble.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=oliver@neukum.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).