The legacy API wrappers in include/linux/pci-dma-compat.h
should go away as it creates unnecessary midlayering
for include/linux/dma-mapping.h APIs, instead use dma-mapping.h
APIs directly.

The patch has been generated with the coccinelle script below
and compile-tested.

@@@@
- PCI_DMA_BIDIRECTIONAL
+ DMA_BIDIRECTIONAL

@@@@
- PCI_DMA_TODEVICE
+ DMA_TO_DEVICE

@@@@
- PCI_DMA_FROMDEVICE
+ DMA_FROM_DEVICE

@@@@
- PCI_DMA_NONE
+ DMA_NONE

@@ expression E1, E2, E3; @@
- pci_alloc_consistent(E1, E2, E3)
+ dma_alloc_coherent(&E1->dev, E2, E3, GFP_)

@@ expression E1, E2, E3; @@
- pci_zalloc_consistent(E1, E2, E3)
+ dma_alloc_coherent(&E1->dev, E2, E3, GFP_)

@@ expression E1, E2, E3, E4; @@
- pci_free_consistent(E1, E2, E3, E4)
+ dma_free_coherent(&E1->dev, E2, E3, E4)

@@ expression E1, E2, E3, E4; @@
- pci_map_single(E1, E2, E3, E4)
+ dma_map_single(&E1->dev, E2, E3, E4)

@@ expression E1, E2, E3, E4; @@
- pci_unmap_single(E1, E2, E3, E4)
+ dma_unmap_single(&E1->dev, E2, E3, E4)

@@ expression E1, E2, E3, E4, E5; @@
- pci_map_page(E1, E2, E3, E4, E5)
+ dma_map_page(&E1->dev, E2, E3, E4, E5)

@@ expression E1, E2, E3, E4; @@
- pci_unmap_page(E1, E2, E3, E4)
+ dma_unmap_page(&E1->dev, E2, E3, E4)

@@ expression E1, E2, E3, E4; @@
- pci_map_sg(E1, E2, E3, E4)
+ dma_map_sg(&E1->dev, E2, E3, E4)

@@ expression E1, E2, E3, E4; @@
- pci_unmap_sg(E1, E2, E3, E4)
+ dma_unmap_sg(&E1->dev, E2, E3, E4)

@@ expression E1, E2, E3, E4; @@
- pci_dma_sync_single_for_cpu(E1, E2, E3, E4)
+ dma_sync_single_for_cpu(&E1->dev, E2, E3, E4)

@@ expression E1, E2, E3, E4; @@
- pci_dma_sync_single_for_device(E1, E2, E3, E4)
+ dma_sync_single_for_device(&E1->dev, E2, E3, E4)

@@ expression E1, E2, E3, E4; @@
- pci_dma_sync_sg_for_cpu(E1, E2, E3, E4)
+ dma_sync_sg_for_cpu(&E1->dev, E2, E3, E4)

@@ expression E1, E2, E3, E4; @@
- pci_dma_sync_sg_for_device(E1, E2, E3, E4)
+ dma_sync_sg_for_device(&E1->dev, E2, E3, E4)

@@ expression E1, E2; @@
- pci_dma_mapping_error(E1, E2)
+ dma_mapping_error(&E1->dev, E2)

@@ expression E1, E2; @@
- pci_set_consistent_dma_mask(E1, E2)
+ dma_set_coherent_mask(&E1->dev, E2)

@@ expression E1, E2; @@
- pci_set_dma_mask(E1, E2)
+ dma_set_mask(&E1->dev, E2)

Signed-off-by: Suraj Upadhyay <usuraj35@gmail.com>
---
 drivers/scsi/qla2xxx/qla_os.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 9b59f032a569..8b4e3da1de5a 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -1885,7 +1885,7 @@ qla2x00_config_dma_addressing(struct qla_hw_data *ha)
 	if (!dma_set_mask(&ha->pdev->dev, DMA_BIT_MASK(64))) {
 		/* Any upper-dword bits set? */
 		if (MSD(dma_get_required_mask(&ha->pdev->dev)) &&
-		    !pci_set_consistent_dma_mask(ha->pdev, DMA_BIT_MASK(64))) {
+		    !dma_set_coherent_mask(&ha->pdev->dev, DMA_BIT_MASK(64))) {
 			/* Ok, a 64bit DMA mask is applicable. */
 			ha->flags.enable_64bit_addressing = 1;
 			ha->isp_ops->calc_req_entries = qla2x00_calc_iocbs_64;
@@ -1895,7 +1895,7 @@ qla2x00_config_dma_addressing(struct qla_hw_data *ha)
 	}
 
 	dma_set_mask(&ha->pdev->dev, DMA_BIT_MASK(32));
-	pci_set_consistent_dma_mask(ha->pdev, DMA_BIT_MASK(32));
+	dma_set_coherent_mask(&ha->pdev->dev, DMA_BIT_MASK(32));
 }
 
 static void
-- 
2.17.1