* [PATCH V4 1/2] pm80xx : Support for get phy profile functionality.
2020-07-29 12:50 [PATCH V4 0/2] pm80xx : Updates for the driver version 0.1.39 Deepak Ukey
@ 2020-07-29 12:50 ` Deepak Ukey
2020-07-29 13:05 ` Johannes Thumshirn
2020-07-29 12:50 ` [PATCH V4 2/2] pm80xx : Staggered spin up support Deepak Ukey
1 sibling, 1 reply; 4+ messages in thread
From: Deepak Ukey @ 2020-07-29 12:50 UTC (permalink / raw)
To: linux-scsi
Cc: Vasanthalakshmi.Tharmarajan, Viswas.G, deepak.ukey, jinpu.wang,
martin.petersen, yuuzheng, auradkar, vishakhavc, bjashnani,
radha, akshatzen
From: Viswas G <Viswas.G@microchip.com>
Added the support to get the phy profile which gives information
about the phy states, port and errors on phy.
Signed-off-by: Deepak Ukey <deepak.ukey@microchip.com>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Signed-off-by: Radha Ramachandran <radha@google.com>
Reported-by: kernel test robot <lkp@intel.com>
---
drivers/scsi/pm8001/pm8001_ctl.h | 20 +++++++++
drivers/scsi/pm8001/pm8001_init.c | 2 +
drivers/scsi/pm8001/pm8001_sas.h | 5 +++
drivers/scsi/pm8001/pm80xx_hwi.c | 88 ++++++++++++++++++++++++++++++++++++++-
drivers/scsi/pm8001/pm80xx_hwi.h | 2 +
5 files changed, 115 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/pm8001/pm8001_ctl.h b/drivers/scsi/pm8001/pm8001_ctl.h
index d0d43a250b9e..02dc04a1fbe8 100644
--- a/drivers/scsi/pm8001/pm8001_ctl.h
+++ b/drivers/scsi/pm8001/pm8001_ctl.h
@@ -41,6 +41,26 @@
#ifndef PM8001_CTL_H_INCLUDED
#define PM8001_CTL_H_INCLUDED
+struct phy_status {
+ char phy_id;
+ unsigned int phy_state:4;
+ unsigned int nlr:4;
+ unsigned int plr:4;
+ unsigned int reserved1:12;
+ unsigned char port_id;
+ unsigned int prts:4;
+ unsigned int reserved2:20;
+} __packed;
+
+struct phy_errcnt {
+ unsigned int InvalidDword;
+ unsigned int runningDisparityError;
+ unsigned int codeViolation;
+ unsigned int LossOfSyncDW;
+ unsigned int phyResetProblem;
+ unsigned int inboundCRCError;
+};
+
#define IOCTL_BUF_SIZE 4096
#define HEADER_LEN 28
#define SIZE_OFFSET 16
diff --git a/drivers/scsi/pm8001/pm8001_init.c b/drivers/scsi/pm8001/pm8001_init.c
index 9e99262a2b9d..ff65d6cf6d31 100644
--- a/drivers/scsi/pm8001/pm8001_init.c
+++ b/drivers/scsi/pm8001/pm8001_init.c
@@ -398,6 +398,8 @@ static int pm8001_alloc(struct pm8001_hba_info *pm8001_ha,
pm8001_ha->ccb_info[i].task = NULL;
pm8001_ha->ccb_info[i].ccb_tag = 0xffffffff;
pm8001_ha->ccb_info[i].device = NULL;
+ pm8001_ha->ccb_info[i].completion = NULL;
+ pm8001_ha->ccb_info[i].resp_buf = NULL;
++pm8001_ha->tags_num;
}
pm8001_ha->flags = PM8001F_INIT_TIME;
diff --git a/drivers/scsi/pm8001/pm8001_sas.h b/drivers/scsi/pm8001/pm8001_sas.h
index ae7ba9b3c4bc..488af79dec47 100644
--- a/drivers/scsi/pm8001/pm8001_sas.h
+++ b/drivers/scsi/pm8001/pm8001_sas.h
@@ -56,6 +56,7 @@
#include <scsi/sas_ata.h>
#include <linux/atomic.h>
#include "pm8001_defs.h"
+#include "pm8001_ctl.h"
#define DRV_NAME "pm80xx"
#define DRV_VERSION "0.1.39"
@@ -244,6 +245,8 @@ struct pm8001_dispatch {
int (*sas_diag_execute_req)(struct pm8001_hba_info *pm8001_ha,
u32 state);
int (*sas_re_init_req)(struct pm8001_hba_info *pm8001_ha);
+ int (*get_phy_profile_req)(struct pm8001_hba_info *pm8001_ha,
+ int phy, int page, struct completion *comp, void *buf);
};
struct pm8001_chip_info {
@@ -318,6 +321,8 @@ struct pm8001_ccb_info {
struct pm8001_prd buf_prd[PM8001_MAX_DMA_SG];
struct fw_control_ex *fw_control_context;
u8 open_retry;
+ struct completion *completion;
+ void *resp_buf;
};
struct mpi_mem {
diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c
index 4d205ebaee87..baccb082e65f 100644
--- a/drivers/scsi/pm8001/pm80xx_hwi.c
+++ b/drivers/scsi/pm8001/pm80xx_hwi.c
@@ -3792,7 +3792,6 @@ static int mpi_set_controller_config_resp(struct pm8001_hba_info *pm8001_ha,
PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
"SET CONTROLLER RESP: status 0x%x qlfr_pgcd 0x%x\n",
status, err_qlfr_pgcd));
-
return 0;
}
@@ -3818,9 +3817,63 @@ static int mpi_get_controller_config_resp(struct pm8001_hba_info *pm8001_ha,
static int mpi_get_phy_profile_resp(struct pm8001_hba_info *pm8001_ha,
void *piomb)
{
+ u32 tag, page_code;
+ struct phy_status *phy_status, *phy_stat;
+ struct phy_errcnt *phy_err, *phy_err_cnt;
+ struct pm8001_ccb_info *ccb;
+ struct get_phy_profile_resp *pPayload =
+ (struct get_phy_profile_resp *)(piomb + 4);
+ u32 status = le32_to_cpu(pPayload->status);
+
+ page_code = (u8)((pPayload->ppc_phyid & 0xFF00) >> 8);
+
PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk(" pm80xx_addition_functionality\n"));
+ pm8001_printk(" pm80xx_addition_functionality\n"));
+ if (status) {
+ /* status is FAILED */
+ PM8001_FAIL_DBG(pm8001_ha, pm8001_printk(
+ "mpiGetPhyProfileReq failed with status 0x%08x\n",
+ status));
+ }
+ tag = le32_to_cpu(pPayload->tag);
+ ccb = &pm8001_ha->ccb_info[tag];
+ if (ccb->completion != NULL) {
+ if (status) {
+ /* signal fail status */
+ memset(&ccb->resp_buf, 0xff, sizeof(ccb->resp_buf));
+ } else if (page_code == SAS_PHY_GENERAL_STATUS_PAGE) {
+ phy_status = (struct phy_status *)ccb->resp_buf;
+ phy_stat =
+ (struct phy_status *)pPayload->ppc_specific_rsp;
+ phy_status->phy_id =
+ le32_to_cpu((__force __le32)phy_stat->phy_id);
+ phy_status->phy_state =
+ le32_to_cpu((__force __le32)phy_stat->phy_state);
+ phy_status->plr =
+ le32_to_cpu((__force __le32)phy_stat->plr);
+ phy_status->nlr =
+ le32_to_cpu((__force __le32)phy_stat->nlr);
+ phy_status->port_id =
+ le32_to_cpu((__force __le32)phy_stat->port_id);
+ phy_status->prts =
+ le32_to_cpu((__force __le32)phy_stat->prts);
+ } else if (page_code == SAS_PHY_ERR_COUNTERS_PAGE) {
+ phy_err = (struct phy_errcnt *)ccb->resp_buf;
+ phy_err_cnt =
+ (struct phy_errcnt *)pPayload->ppc_specific_rsp;
+ phy_err->InvalidDword =
+ le32_to_cpu((__force __le32)phy_err_cnt->InvalidDword);
+ phy_err->runningDisparityError = le32_to_cpu
+ ((__force __le32)phy_err_cnt->runningDisparityError);
+ phy_err->LossOfSyncDW = le32_to_cpu
+ ((__force __le32)phy_err_cnt->LossOfSyncDW);
+ phy_err->phyResetProblem = le32_to_cpu
+ ((__force __le32)phy_err_cnt->phyResetProblem);
+ }
+ complete(ccb->completion);
+ }
+ pm8001_tag_free(pm8001_ha, tag);
return 0;
}
@@ -5013,6 +5066,36 @@ pm80xx_chip_isr(struct pm8001_hba_info *pm8001_ha, u8 vec)
return IRQ_HANDLED;
}
+static int pm8001_chip_get_phy_profile(struct pm8001_hba_info *pm8001_ha,
+ int phy_id, int page_code, struct completion *comp, void *buf)
+{
+ u32 tag;
+ struct get_phy_profile_req payload;
+ struct inbound_queue_table *circularQ;
+ struct pm8001_ccb_info *ccb;
+ int rc, ppc_phyid;
+ u32 opc = OPC_INB_GET_PHY_PROFILE;
+
+ memset(&payload, 0, sizeof(payload));
+
+ rc = pm8001_tag_alloc(pm8001_ha, &tag);
+ if (rc)
+ PM8001_FAIL_DBG(pm8001_ha, pm8001_printk("Invalid tag\n"));
+
+ ccb = &pm8001_ha->ccb_info[tag];
+ ccb->completion = comp;
+ ccb->resp_buf = buf;
+ circularQ = &pm8001_ha->inbnd_q_tbl[0];
+
+ payload.tag = cpu_to_le32(tag);
+ ppc_phyid = (page_code & 0xFF) << 8 | (phy_id & 0xFF);
+ payload.ppc_phyid = cpu_to_le32(ppc_phyid);
+
+ pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &payload,
+ sizeof(payload), 0);
+ return rc;
+}
+
void mpi_set_phy_profile_req(struct pm8001_hba_info *pm8001_ha,
u32 operation, u32 phyid, u32 length, u32 *buf)
{
@@ -5113,4 +5196,5 @@ const struct pm8001_dispatch pm8001_80xx_dispatch = {
.set_nvmd_req = pm8001_chip_set_nvmd_req,
.fw_flash_update_req = pm8001_chip_fw_flash_update_req,
.set_dev_state_req = pm8001_chip_set_dev_state_req,
+ .get_phy_profile_req = pm8001_chip_get_phy_profile,
};
diff --git a/drivers/scsi/pm8001/pm80xx_hwi.h b/drivers/scsi/pm8001/pm80xx_hwi.h
index 701951a0f715..b5119c5479da 100644
--- a/drivers/scsi/pm8001/pm80xx_hwi.h
+++ b/drivers/scsi/pm8001/pm80xx_hwi.h
@@ -175,7 +175,9 @@
#define PHY_STOP_ERR_DEVICE_ATTACHED 0x1046
/* phy_profile */
+#define SAS_PHY_ERR_COUNTERS_PAGE 0x01
#define SAS_PHY_ANALOG_SETTINGS_PAGE 0x04
+#define SAS_PHY_GENERAL_STATUS_PAGE 0x05
#define PHY_DWORD_LENGTH 0xC
/* Thermal related */
--
2.16.3
^ permalink raw reply related [flat|nested] 4+ messages in thread* [PATCH V4 2/2] pm80xx : Staggered spin up support.
2020-07-29 12:50 [PATCH V4 0/2] pm80xx : Updates for the driver version 0.1.39 Deepak Ukey
2020-07-29 12:50 ` [PATCH V4 1/2] pm80xx : Support for get phy profile functionality Deepak Ukey
@ 2020-07-29 12:50 ` Deepak Ukey
1 sibling, 0 replies; 4+ messages in thread
From: Deepak Ukey @ 2020-07-29 12:50 UTC (permalink / raw)
To: linux-scsi
Cc: Vasanthalakshmi.Tharmarajan, Viswas.G, deepak.ukey, jinpu.wang,
martin.petersen, yuuzheng, auradkar, vishakhavc, bjashnani,
radha, akshatzen
From: Viswas G <Viswas.G@microchip.com>
As a part of drive discovery, driver will initaite the drive spin up.
If all drives do spin up together, it will result in large power
consumption. To reduce the power consumption, driver provide an option
to make a small group of drives (say 3 or 4 drives together) to do the
spin up. The delay between two spin up group and no of drives to
spin up (group) can be programmed by the customer in seeprom and
driver will use it to control the spinup.
Signed-off-by: Deepak Ukey <Deepak.Ukey@microchip.com>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Signed-off-by: Radha Ramachandran <radha@google.com>
Signed-off-by: kernel test robot <lkp@intel.com>
Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com>
---
drivers/scsi/pm8001/pm8001_defs.h | 3 +
drivers/scsi/pm8001/pm8001_hwi.c | 14 ++++-
drivers/scsi/pm8001/pm8001_init.c | 53 +++++++++++++++-
drivers/scsi/pm8001/pm8001_sas.c | 36 ++++++++++-
drivers/scsi/pm8001/pm8001_sas.h | 13 ++++
drivers/scsi/pm8001/pm80xx_hwi.c | 125 +++++++++++++++++++++++++++++++++-----
6 files changed, 221 insertions(+), 23 deletions(-)
diff --git a/drivers/scsi/pm8001/pm8001_defs.h b/drivers/scsi/pm8001/pm8001_defs.h
index 1c7f15fd69ce..fd700ce5e80c 100644
--- a/drivers/scsi/pm8001/pm8001_defs.h
+++ b/drivers/scsi/pm8001/pm8001_defs.h
@@ -101,6 +101,9 @@ enum port_type {
#define USI_MAX_MEMCNT (PI + PM8001_MAX_SPCV_OUTB_NUM)
#define CONFIG_SCSI_PM8001_MAX_DMA_SG 528
#define PM8001_MAX_DMA_SG CONFIG_SCSI_PM8001_MAX_DMA_SG
+#define SPINUP_DELAY_OFFSET 0x890 /* 0x890 - delay */
+#define SPINUP_GROUP_OFFSET 0x892 /* 0x892 - group */
+#define PM80XX_MAX_SPINUP_DELAY 10000 /* 10000 ms */
enum memory_region_num {
AAP1 = 0x0, /* application acceleration processor */
IOP, /* IO processor */
diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
index fb9848e1d481..6378c8e8d6b2 100644
--- a/drivers/scsi/pm8001/pm8001_hwi.c
+++ b/drivers/scsi/pm8001/pm8001_hwi.c
@@ -3237,7 +3237,7 @@ int pm8001_mpi_local_phy_ctl(struct pm8001_hba_info *pm8001_ha, void *piomb)
(struct local_phy_ctl_resp *)(piomb + 4);
u32 status = le32_to_cpu(pPayload->status);
u32 phy_id = le32_to_cpu(pPayload->phyop_phyid) & ID_BITS;
- u32 phy_op = le32_to_cpu(pPayload->phyop_phyid) & OP_BITS;
+ u32 phy_op = (le32_to_cpu(pPayload->phyop_phyid) & OP_BITS) >> 8;
tag = le32_to_cpu(pPayload->tag);
if (status != 0) {
PM8001_MSG_DBG(pm8001_ha,
@@ -3248,6 +3248,13 @@ int pm8001_mpi_local_phy_ctl(struct pm8001_hba_info *pm8001_ha, void *piomb)
pm8001_printk("%x phy execute %x phy op success!\n",
phy_id, phy_op));
pm8001_ha->phy[phy_id].reset_success = true;
+ if (phy_op == PHY_NOTIFY_ENABLE_SPINUP &&
+ !pm8001_ha->reset_in_progress){
+ /* Notify the sas layer to discover
+ * the the whole sas domain
+ */
+ pm8001_bytes_dmaed(pm8001_ha, phy_id);
+ }
}
if (pm8001_ha->phy[phy_id].enable_completion) {
complete(pm8001_ha->phy[phy_id].enable_completion);
@@ -3643,7 +3650,10 @@ int pm8001_mpi_reg_resp(struct pm8001_hba_info *pm8001_ha, void *piomb)
pm8001_printk("DEVREG_FAILURE_DEVICE_TYPE_NOT_SUPPORTED\n"));
break;
}
- complete(pm8001_dev->dcompletion);
+ if (pm8001_dev->dcompletion) {
+ complete(pm8001_dev->dcompletion);
+ pm8001_dev->dcompletion = NULL;
+ }
ccb->task = NULL;
ccb->ccb_tag = 0xFFFFFFFF;
pm8001_tag_free(pm8001_ha, htag);
diff --git a/drivers/scsi/pm8001/pm8001_init.c b/drivers/scsi/pm8001/pm8001_init.c
index ff65d6cf6d31..05f1b355d68e 100644
--- a/drivers/scsi/pm8001/pm8001_init.c
+++ b/drivers/scsi/pm8001/pm8001_init.c
@@ -55,6 +55,12 @@ MODULE_PARM_DESC(link_rate, "Enable link rate.\n"
" 4: Link rate 6.0G\n"
" 8: Link rate 12.0G\n");
+bool staggered_spinup;
+module_param(staggered_spinup, bool, 0644);
+MODULE_PARM_DESC(staggered_spinup, "enable the staggered spinup feature.\n"
+ " 0/N: false\n"
+ " 1/Y: true\n");
+
static struct scsi_transport_template *pm8001_stt;
/**
@@ -165,7 +171,7 @@ static void pm8001_free(struct pm8001_hba_info *pm8001_ha)
if (!pm8001_ha)
return;
-
+ del_timer(&pm8001_ha->spinup_timer);
for (i = 0; i < USI_MAX_MEMCNT; i++) {
if (pm8001_ha->memoryMap.region[i].virt_ptr != NULL) {
dma_free_coherent(&pm8001_ha->pdev->dev,
@@ -489,6 +495,7 @@ static struct pm8001_hba_info *pm8001_pci_alloc(struct pci_dev *pdev,
pm8001_ha->shost = shost;
pm8001_ha->id = pm8001_id++;
pm8001_ha->logging_level = logging_level;
+ pm8001_ha->staggered_spinup = staggered_spinup;
pm8001_ha->non_fatal_count = 0;
if (link_rate >= 1 && link_rate <= 15)
pm8001_ha->link_rate = (link_rate << 8);
@@ -622,7 +629,8 @@ static void pm8001_post_sas_ha_init(struct Scsi_Host *shost,
* Currently we just set the fixed SAS address to our HBA,for manufacture,
* it should read from the EEPROM
*/
-static void pm8001_init_sas_add(struct pm8001_hba_info *pm8001_ha)
+static void pm8001_init_sas_add_and_spinup_config
+ (struct pm8001_hba_info *pm8001_ha)
{
u8 i, j;
u8 sas_add[8];
@@ -708,6 +716,45 @@ static void pm8001_init_sas_add(struct pm8001_hba_info *pm8001_ha)
memcpy(pm8001_ha->sas_addr, &pm8001_ha->phy[0].dev_sas_addr,
SAS_ADDR_SIZE);
#endif
+
+ /* For spinning up drives in group */
+ pm8001_ha->phy_head = -1;
+ pm8001_ha->phy_tail = -1;
+
+ for (i = 0; i < PM8001_MAX_PHYS; i++)
+ pm8001_ha->phy_up[i] = 0xff;
+
+ timer_setup(&pm8001_ha->spinup_timer,
+ (void *)pm8001_spinup_timedout, 0);
+
+ if (pm8001_ha->staggered_spinup == true) {
+ /* spinup interval in unit of 100 ms */
+ pm8001_ha->spinup_interval =
+ payload.func_specific[SPINUP_DELAY_OFFSET] * 100;
+ pm8001_ha->spinup_group =
+ payload.func_specific[SPINUP_GROUP_OFFSET];
+ } else {
+ pm8001_ha->spinup_interval = 0;
+ pm8001_ha->spinup_group = pm8001_ha->chip->n_phy;
+ }
+
+ if (pm8001_ha->spinup_interval > PM80XX_MAX_SPINUP_DELAY) {
+ PM8001_DISC_DBG(pm8001_ha, pm8001_printk(
+ "Spinup delay from Seeprom is %d ms, reset to %d ms\n",
+ pm8001_ha->spinup_interval * 100, PM80XX_MAX_SPINUP_DELAY));
+ pm8001_ha->spinup_interval = PM80XX_MAX_SPINUP_DELAY;
+ }
+
+ if (pm8001_ha->spinup_group > pm8001_ha->chip->n_phy) {
+ PM8001_DISC_DBG(pm8001_ha, pm8001_printk(
+ "Spinup group from Seeprom is %d, reset to %d\n",
+ pm8001_ha->spinup_group, pm8001_ha->chip->n_phy));
+ pm8001_ha->spinup_group = pm8001_ha->chip->n_phy;
+ }
+
+ PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
+ "Spinup interval : %d Spinup group %d\n",
+ pm8001_ha->spinup_interval, pm8001_ha->spinup_group));
}
/*
@@ -1106,7 +1153,7 @@ static int pm8001_pci_probe(struct pci_dev *pdev,
pm80xx_set_thermal_config(pm8001_ha);
}
- pm8001_init_sas_add(pm8001_ha);
+ pm8001_init_sas_add_and_spinup_config(pm8001_ha);
/* phy setting support for motherboard controller */
if (pm8001_configure_phy_settings(pm8001_ha))
goto err_out_shost;
diff --git a/drivers/scsi/pm8001/pm8001_sas.c b/drivers/scsi/pm8001/pm8001_sas.c
index b7cbc312843e..cf1c5e68953b 100644
--- a/drivers/scsi/pm8001/pm8001_sas.c
+++ b/drivers/scsi/pm8001/pm8001_sas.c
@@ -265,14 +265,39 @@ int pm8001_phy_control(struct asd_sas_phy *sas_phy, enum phy_func func,
void pm8001_scan_start(struct Scsi_Host *shost)
{
int i;
+ unsigned long lock_flags;
struct pm8001_hba_info *pm8001_ha;
struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+ DECLARE_COMPLETION(comp);
pm8001_ha = sha->lldd_ha;
/* SAS_RE_INITIALIZATION not available in SPCv/ve */
if (pm8001_ha->chip_id == chip_8001)
PM8001_CHIP_DISP->sas_re_init_req(pm8001_ha);
- for (i = 0; i < pm8001_ha->chip->n_phy; ++i)
- PM8001_CHIP_DISP->phy_start_req(pm8001_ha, i);
+
+ if (pm8001_ha->pdev->device == 0x8001 ||
+ pm8001_ha->pdev->device == 0x8081 ||
+ (pm8001_ha->spinup_interval != 0)) {
+ for (i = 0; i < pm8001_ha->chip->n_phy; ++i)
+ PM8001_CHIP_DISP->phy_start_req(pm8001_ha, i);
+ } else {
+ for (i = 0; i < pm8001_ha->chip->n_phy; ++i) {
+ spin_lock_irqsave(&pm8001_ha->lock, lock_flags);
+ pm8001_ha->phy_started = i;
+ pm8001_ha->scan_completion = ∁
+ pm8001_ha->phystart_timedout = 1;
+ spin_unlock_irqrestore(&pm8001_ha->lock, lock_flags);
+ PM8001_CHIP_DISP->phy_start_req(pm8001_ha, i);
+ wait_for_completion_timeout(&comp,
+ msecs_to_jiffies(500));
+ if (pm8001_ha->phystart_timedout)
+ PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
+ "Timeout happened for phyid = %d\n", i));
+ }
+ spin_lock_irqsave(&pm8001_ha->lock, lock_flags);
+ pm8001_ha->phy_started = -1;
+ pm8001_ha->scan_completion = NULL;
+ spin_unlock_irqrestore(&pm8001_ha->lock, lock_flags);
+ }
}
int pm8001_scan_finished(struct Scsi_Host *shost, unsigned long time)
@@ -662,6 +687,13 @@ static int pm8001_dev_found_notify(struct domain_device *dev)
flag = 1; /* directly sata */
}
} /*register this device to HBA*/
+
+ if (pm8001_ha->phy_started == pm8001_device->attached_phy) {
+ if (pm8001_ha->scan_completion != NULL) {
+ pm8001_ha->phystart_timedout = 0;
+ complete(pm8001_ha->scan_completion);
+ }
+ }
PM8001_DISC_DBG(pm8001_ha, pm8001_printk("Found device\n"));
PM8001_CHIP_DISP->reg_dev_req(pm8001_ha, pm8001_device, flag);
spin_unlock_irqrestore(&pm8001_ha->lock, flags);
diff --git a/drivers/scsi/pm8001/pm8001_sas.h b/drivers/scsi/pm8001/pm8001_sas.h
index 488af79dec47..d2d73cba7f41 100644
--- a/drivers/scsi/pm8001/pm8001_sas.h
+++ b/drivers/scsi/pm8001/pm8001_sas.h
@@ -261,6 +261,7 @@ struct pm8001_port {
u8 port_attached;
u16 wide_port_phymap;
u8 port_state;
+ u8 port_id;
struct list_head list;
};
@@ -566,6 +567,17 @@ struct pm8001_hba_info {
u32 reset_in_progress;
u32 non_fatal_count;
u32 non_fatal_read_length;
+ bool staggered_spinup;
+ struct completion *scan_completion;
+ u32 phy_started;
+ u16 phystart_timedout;
+ int spinup_group;
+ int spinup_interval;
+ int phy_up[PM8001_MAX_PHYS];
+ struct timer_list spinup_timer;
+ int phy_head;
+ int phy_tail;
+ spinlock_t phy_q_lock;
};
struct pm8001_work {
@@ -684,6 +696,7 @@ void pm8001_open_reject_retry(
int pm8001_mem_alloc(struct pci_dev *pdev, void **virt_addr,
dma_addr_t *pphys_addr, u32 *pphys_addr_hi, u32 *pphys_addr_lo,
u32 mem_size, u32 align);
+void pm8001_spinup_timedout(struct timer_list *t);
void pm8001_chip_iounmap(struct pm8001_hba_info *pm8001_ha);
int pm8001_mpi_build_cmd(struct pm8001_hba_info *pm8001_ha,
diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c
index baccb082e65f..92145109ab4e 100644
--- a/drivers/scsi/pm8001/pm80xx_hwi.c
+++ b/drivers/scsi/pm8001/pm80xx_hwi.c
@@ -46,6 +46,72 @@
#define SMP_DIRECT 1
#define SMP_INDIRECT 2
+static int pm80xx_chip_phy_ctl_req(struct pm8001_hba_info *pm8001_ha,
+ u32 phyId, u32 phy_op);
+
+static void pm8001_queue_phyup(struct pm8001_hba_info *pm8001_ha, int phy_id)
+{
+ int i;
+
+ if (pm8001_ha->phy_head == -1) {
+ pm8001_ha->phy_head = pm8001_ha->phy_tail = 0;
+ } else {
+ /* If the phy id is already queued , discard the phy up */
+ for (i = 0; i < pm8001_ha->chip->n_phy; i++)
+ if (pm8001_ha->phy_up[i] == phy_id)
+ return;
+ pm8001_ha->phy_tail =
+ (pm8001_ha->phy_tail + 1) % PM8001_MAX_PHYS;
+ }
+ pm8001_ha->phy_up[pm8001_ha->phy_tail] = phy_id;
+}
+
+void pm8001_spinup_timedout(struct timer_list *t)
+{
+ struct pm8001_hba_info *pm8001_ha =
+ from_timer(pm8001_ha, t, spinup_timer);
+ struct pm8001_phy *phy;
+ unsigned long flags;
+ int i = 0, phy_id = 0xff;
+
+ spin_lock_irqsave(&pm8001_ha->phy_q_lock, flags);
+
+ do {
+ if (i++ >= pm8001_ha->spinup_group && pm8001_ha->spinup_group)
+ break;
+
+ if (pm8001_ha->phy_head == -1 || pm8001_ha->reset_in_progress)
+ break; /* No phys to spinup */
+
+ phy_id = pm8001_ha->phy_up[pm8001_ha->phy_head];
+ /* Processed phy id, make it invalid 0xff for
+ * checking repeated phy ups
+ */
+ pm8001_ha->phy_up[pm8001_ha->phy_head] = 0xff;
+ if (pm8001_ha->phy_head == pm8001_ha->phy_tail) {
+ pm8001_ha->phy_head = pm8001_ha->phy_tail = -1;
+ } else {
+ pm8001_ha->phy_head =
+ (pm8001_ha->phy_head+1) % PM8001_MAX_PHYS;
+ }
+
+ if (phy_id == 0xff)
+ break;
+ phy = &pm8001_ha->phy[phy_id];
+ if (phy->phy_type & PORT_TYPE_SAS) {
+ PM8001_CHIP_DISP->phy_ctl_req(pm8001_ha, phy_id,
+ PHY_NOTIFY_ENABLE_SPINUP);
+ } else {
+ PM8001_CHIP_DISP->phy_ctl_req(pm8001_ha, phy_id,
+ PHY_LINK_RESET);
+ }
+ } while (1);
+
+ if (pm8001_ha->phy_head != -1 && pm8001_ha->spinup_group)
+ mod_timer(&pm8001_ha->spinup_timer,
+ jiffies + msecs_to_jiffies(pm8001_ha->spinup_interval));
+ spin_unlock_irqrestore(&pm8001_ha->phy_q_lock, flags);
+}
int pm80xx_bar4_shift(struct pm8001_hba_info *pm8001_ha, u32 shift_value)
{
@@ -3302,11 +3368,12 @@ hw_event_sas_phy_up(struct pm8001_hba_info *pm8001_ha, void *piomb)
port->port_state = portstate;
port->wide_port_phymap |= (1U << phy_id);
phy->phy_state = PHY_STATE_LINK_UP_SPCV;
+ phy->port = port;
PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
"portid:%d; phyid:%d; linkrate:%d; "
"portstate:%x; devicetype:%x\n",
port_id, phy_id, link_rate, portstate, deviceType));
-
+ port->port_id = port_id;
switch (deviceType) {
case SAS_PHY_UNUSED:
PM8001_MSG_DBG(pm8001_ha,
@@ -3314,8 +3381,12 @@ hw_event_sas_phy_up(struct pm8001_hba_info *pm8001_ha, void *piomb)
break;
case SAS_END_DEVICE:
PM8001_MSG_DBG(pm8001_ha, pm8001_printk("end device.\n"));
- pm80xx_chip_phy_ctl_req(pm8001_ha, phy_id,
- PHY_NOTIFY_ENABLE_SPINUP);
+ spin_lock_irqsave(&pm8001_ha->phy_q_lock, flags);
+ pm8001_queue_phyup(pm8001_ha, phy_id);
+ spin_unlock_irqrestore(&pm8001_ha->phy_q_lock, flags);
+ if (!timer_pending(&pm8001_ha->spinup_timer))
+ mod_timer(&pm8001_ha->spinup_timer,
+ jiffies + msecs_to_jiffies(pm8001_ha->spinup_interval));
port->port_attached = 1;
pm8001_get_lrate_mode(phy, link_rate);
break;
@@ -3351,9 +3422,10 @@ hw_event_sas_phy_up(struct pm8001_hba_info *pm8001_ha, void *piomb)
phy->frame_rcvd_size = sizeof(struct sas_identify_frame) - 4;
pm8001_get_attached_sas_addr(phy, phy->sas_phy.attached_sas_addr);
spin_unlock_irqrestore(&phy->sas_phy.frame_rcvd_lock, flags);
- if (pm8001_ha->flags == PM8001F_RUN_TIME)
- msleep(200);/*delay a moment to wait disk to spinup*/
- pm8001_bytes_dmaed(pm8001_ha, phy_id);
+ if (!pm8001_ha->reset_in_progress) {
+ if (deviceType != SAS_END_DEVICE)
+ pm8001_bytes_dmaed(pm8001_ha, phy_id);
+ }
}
/**
@@ -3388,11 +3460,17 @@ hw_event_sata_phy_up(struct pm8001_hba_info *pm8001_ha, void *piomb)
port->port_state = portstate;
phy->phy_state = PHY_STATE_LINK_UP_SPCV;
port->port_attached = 1;
+ phy->port = port;
+ port->port_id = port_id;
pm8001_get_lrate_mode(phy, link_rate);
phy->phy_type |= PORT_TYPE_SATA;
phy->phy_attached = 1;
phy->sas_phy.oob_mode = SATA_OOB_MODE;
- sas_ha->notify_phy_event(&phy->sas_phy, PHYE_OOB_DONE);
+ if (!pm8001_ha->reset_in_progress) {
+ sas_ha->notify_phy_event(&phy->sas_phy, PHYE_OOB_DONE);
+ } else
+ PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
+ "HW_EVENT_PHY_UP: not notified to host\n"));
spin_lock_irqsave(&phy->sas_phy.frame_rcvd_lock, flags);
memcpy(phy->frame_rcvd, ((u8 *)&pPayload->sata_fis - 4),
sizeof(struct dev_to_host_fis));
@@ -3401,7 +3479,8 @@ hw_event_sata_phy_up(struct pm8001_hba_info *pm8001_ha, void *piomb)
phy->identify.device_type = SAS_SATA_DEV;
pm8001_get_attached_sas_addr(phy, phy->sas_phy.attached_sas_addr);
spin_unlock_irqrestore(&phy->sas_phy.frame_rcvd_lock, flags);
- pm8001_bytes_dmaed(pm8001_ha, phy_id);
+ if (!pm8001_ha->reset_in_progress)
+ pm8001_bytes_dmaed(pm8001_ha, phy_id);
}
/**
@@ -3497,12 +3576,14 @@ static int mpi_phy_start_resp(struct pm8001_hba_info *pm8001_ha, void *piomb)
status, phy_id));
if (status == 0) {
phy->phy_state = PHY_LINK_DOWN;
- if (pm8001_ha->flags == PM8001F_RUN_TIME &&
- phy->enable_completion != NULL) {
- complete(phy->enable_completion);
- phy->enable_completion = NULL;
- }
}
+
+ if (pm8001_ha->flags == PM8001F_RUN_TIME &&
+ phy->enable_completion != NULL) {
+ complete(phy->enable_completion);
+ phy->enable_completion = NULL;
+ }
+
return 0;
}
@@ -3580,7 +3661,14 @@ static int mpi_hw_event(struct pm8001_hba_info *pm8001_ha, void *piomb)
case HW_EVENT_SATA_SPINUP_HOLD:
PM8001_MSG_DBG(pm8001_ha,
pm8001_printk("HW_EVENT_SATA_SPINUP_HOLD\n"));
- sas_ha->notify_phy_event(&phy->sas_phy, PHYE_SPINUP_HOLD);
+ spin_lock_irqsave(&pm8001_ha->phy_q_lock, flags);
+ pm8001_queue_phyup(pm8001_ha, phy_id);
+ spin_unlock_irqrestore(&pm8001_ha->phy_q_lock, flags);
+
+ /* Start the timer if not started */
+ if (!timer_pending(&pm8001_ha->spinup_timer))
+ mod_timer(&pm8001_ha->spinup_timer,
+ jiffies + msecs_to_jiffies(pm8001_ha->spinup_interval));
break;
case HW_EVENT_PHY_DOWN:
PM8001_MSG_DBG(pm8001_ha,
@@ -4893,7 +4981,7 @@ pm80xx_chip_phy_start_req(struct pm8001_hba_info *pm8001_ha, u8 phy_id)
PM8001_INIT_DBG(pm8001_ha,
pm8001_printk("PHY START REQ for phy_id %d\n", phy_id));
- payload.ase_sh_lm_slr_phyid = cpu_to_le32(SPINHOLD_DISABLE |
+ payload.ase_sh_lm_slr_phyid = cpu_to_le32(SPINHOLD_ENABLE |
LINKMODE_AUTO | pm8001_ha->link_rate | phy_id);
/* SSC Disable and SAS Analog ST configuration */
/**
@@ -4955,6 +5043,8 @@ static int pm80xx_chip_reg_dev_req(struct pm8001_hba_info *pm8001_ha,
u16 ITNT = 2000;
struct domain_device *dev = pm8001_dev->sas_device;
struct domain_device *parent_dev = dev->parent;
+ struct pm8001_phy *phy;
+ struct pm8001_port *port;
circularQ = &pm8001_ha->inbnd_q_tbl[0];
memset(&payload, 0, sizeof(payload));
@@ -4986,8 +5076,11 @@ static int pm80xx_chip_reg_dev_req(struct pm8001_hba_info *pm8001_ha,
linkrate = (pm8001_dev->sas_device->linkrate < dev->port->linkrate) ?
pm8001_dev->sas_device->linkrate : dev->port->linkrate;
+ phy = &pm8001_ha->phy[phy_id];
+ port = phy->port;
+
payload.phyid_portid =
- cpu_to_le32(((pm8001_dev->sas_device->port->id) & 0xFF) |
+ cpu_to_le32(((port->port_id) & 0xFF) |
((phy_id & 0xFF) << 8));
payload.dtype_dlr_mcn_ir_retry = cpu_to_le32((retryFlag & 0x01) |
--
2.16.3
^ permalink raw reply related [flat|nested] 4+ messages in thread