Linux-SCSI Archive on lore.kernel.org
 help / color / Atom feed
From: Alan Stern <stern@rowland.harvard.edu>
To: Martin Kepplinger <martin.kepplinger@puri.sm>
Cc: James Bottomley <James.Bottomley@hansenpartnership.com>,
	Bart Van Assche <bvanassche@acm.org>,
	Can Guo <cang@codeaurora.org>,
	martin.petersen@oracle.com, linux-scsi@vger.kernel.org,
	linux-kernel@vger.kernel.org, kernel@puri.sm
Subject: Re: [PATCH] scsi: sd: add runtime pm to open / release
Date: Thu, 30 Jul 2020 11:10:30 -0400
Message-ID: <20200730151030.GB6332@rowland.harvard.edu> (raw)
In-Reply-To: <d3fe36a9-b785-a5c4-c90d-b8fa10f4272f@puri.sm>

On Thu, Jul 30, 2020 at 10:52:14AM +0200, Martin Kepplinger wrote:
> Maybe I should just start a new discussion with a patch, but the below
> is what makes sense to me (when I understand you correctly) and seems to
> work. I basically add a new flag, so that the old flags behave unchanged
> and only call it during *runtime* resume for SD cards:
> 
> 
> --- a/drivers/scsi/scsi_error.c
> +++ b/drivers/scsi/scsi_error.c
> @@ -553,15 +553,21 @@ int scsi_check_sense(struct scsi_cmnd *scmd)
>                  * information that we should pass up to the upper-level
> driver
>                  * so that we can deal with it there.
>                  */
> -               if (scmd->device->expecting_cc_ua) {
> +               if (scmd->device->expecting_cc_ua ||
> +                   scmd->device->expecting_media_change) {
>                         /*
>                          * Because some device does not queue unit
>                          * attentions correctly, we carefully check
>                          * additional sense code and qualifier so as
> -                        * not to squash media change unit attention.
> +                        * not to squash media change unit attention;
> +                        * unless expecting_media_change is set, indicating
> +                        * that the media (most likely) didn't change
> +                        * but a device only believes so (for example
> +                        * because of suspend/resume).
>                          */
> -                       if (sshdr.asc != 0x28 || sshdr.ascq != 0x00) {
> -                               scmd->device->expecting_cc_ua = 0;
> +                       if ((sshdr.asc != 0x28 || sshdr.ascq != 0x00) ||
> +                           scmd->device->expecting_media_change) {
> +                               scmd->device->expecting_media_change = 0;
>                                 return NEEDS_RETRY;
>                         }
>                 }
> diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
> index d90fefffe31b..b647fab2b663 100644
> --- a/drivers/scsi/sd.c
> +++ b/drivers/scsi/sd.c
> @@ -114,6 +114,7 @@ static void sd_shutdown(struct device *);
>  static int sd_suspend_system(struct device *);
>  static int sd_suspend_runtime(struct device *);
>  static int sd_resume(struct device *);
> +static int sd_resume_runtime(struct device *);
>  static void sd_rescan(struct device *);
>  static blk_status_t sd_init_command(struct scsi_cmnd *SCpnt);
>  static void sd_uninit_command(struct scsi_cmnd *SCpnt);
> @@ -574,7 +575,7 @@ static const struct dev_pm_ops sd_pm_ops = {
>         .poweroff               = sd_suspend_system,
>         .restore                = sd_resume,
>         .runtime_suspend        = sd_suspend_runtime,
> -       .runtime_resume         = sd_resume,
> +       .runtime_resume         = sd_resume_runtime,
>  };
> 
>  static struct scsi_driver sd_template = {
> @@ -3652,6 +3653,21 @@ static int sd_resume(struct device *dev)
>         return ret;
>  }
> 
> +static int sd_resume_runtime(struct device *dev)
> +{
> +       struct scsi_disk *sdkp = dev_get_drvdata(dev);
> +
> +       /* Some SD cardreaders report media change when resuming from
> suspend
> +        * because they can't keep track during suspend. */
> +
> +       /* XXX This is not unproblematic though: We won't notice when a card
> +        * was really changed during runtime suspend! We basically rely
> on users
> +        * to unmount or suspend before doing so. */
> +       sdkp->device->expecting_media_change = 1;
> +
> +       return sd_resume(dev);
> +}
> +
>  /**
>   *     init_sd - entry point for this driver (both when built in or when
>   *     a module).
> diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h
> index bc5909033d13..8c8f053f71c8 100644
> --- a/include/scsi/scsi_device.h
> +++ b/include/scsi/scsi_device.h
> @@ -169,6 +169,8 @@ struct scsi_device {
>                                  * this device */
>         unsigned expecting_cc_ua:1; /* Expecting a CHECK_CONDITION/UNIT_ATTN
>                                      * because we did a bus reset. */
> +       unsigned expecting_media_change:1; /* Expecting media change
> ASC/ASCQ
> +                                             when it actually doesn't
> change */
>         unsigned use_10_for_rw:1; /* first try 10-byte read / write */
>         unsigned use_10_for_ms:1; /* first try 10-byte mode sense/select */
>         unsigned set_dbd_for_ms:1; /* Set "DBD" field in mode sense */

That's pretty much what James was suggesting, except for one thing: You 
must not set sdkp->device->expecting_media_change to 1 for all devices 
in sd_runtime_resume().  Only for devices which may generate a spurious 
Unit Attention following runtime resume -- and maybe not even for all of 
them, depending on what the user wants.

Alan Stern

  parent reply index

Thread overview: 68+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-06-23 11:10 Martin Kepplinger
2020-06-24 13:33 ` Bart Van Assche
2020-06-25  8:16   ` Martin Kepplinger
2020-06-25 14:52     ` Alan Stern
2020-06-26  3:53     ` Bart Van Assche
2020-06-26 15:07     ` Bart Van Assche
2020-06-26 15:44       ` Alan Stern
2020-06-28  2:37         ` Bart Van Assche
2020-06-28 13:10           ` Alan Stern
2020-06-29  9:42         ` Martin Kepplinger
2020-06-29 16:15           ` Alan Stern
2020-06-29 16:56             ` Bart Van Assche
2020-06-29 17:40               ` Alan Stern
2020-06-30  3:33             ` Martin Kepplinger
2020-06-30 13:38               ` Alan Stern
2020-06-30 15:59             ` Bart Van Assche
2020-06-30 18:02               ` Alan Stern
2020-06-30 19:23                 ` Bart Van Assche
2020-06-30 19:38                   ` Alan Stern
2020-06-30 23:31                     ` Bart Van Assche
2020-07-01  0:49                       ` Alan Stern
2020-07-06 16:41                         ` Alan Stern
2020-07-28  7:02                           ` Martin Kepplinger
2020-07-28 20:02                             ` Alan Stern
2020-07-29 14:12                               ` Martin Kepplinger
2020-07-29 14:32                                 ` Alan Stern
2020-07-29 14:44                                   ` Martin K. Petersen
2020-07-29 14:56                                     ` Alan Stern
2020-07-29 14:46                                   ` James Bottomley
2020-07-29 14:53                                     ` James Bottomley
2020-07-29 15:40                                       ` Martin Kepplinger
2020-07-29 15:44                                         ` James Bottomley
2020-07-29 16:43                                           ` Martin Kepplinger
2020-07-29 18:25                                             ` Alan Stern
2020-07-29 18:29                                               ` James Bottomley
2020-07-30  8:52                                                 ` Martin Kepplinger
2020-07-30  8:54                                                   ` Martin Kepplinger
2020-07-30 15:10                                                   ` Alan Stern [this message]
2020-08-04  9:39                                                     ` Martin Kepplinger
2020-08-07  9:51                                                       ` Martin Kepplinger
2020-08-07 14:30                                                         ` Alan Stern
2020-08-08  6:59                                                           ` Martin Kepplinger
2020-08-08 15:05                                                             ` Alan Stern
2020-08-09  9:20                                                               ` Martin Kepplinger
2020-08-09 15:26                                                                 ` Alan Stern
2020-08-10 12:03                                                                   ` Martin Kepplinger
2020-08-10 14:13                                                                     ` Alan Stern
2020-08-11  7:55                                                                       ` Martin Kepplinger
2020-08-11 13:48                                                                         ` Alan Stern
2020-08-23 14:57                                                                         ` [PATCH] block: Fix bug in runtime-resume handling Alan Stern
2020-08-24 17:48                                                                           ` Bart Van Assche
2020-08-24 20:13                                                                             ` Alan Stern
2020-08-26  7:48                                                                               ` Martin Kepplinger
2020-08-27 17:42                                                                                 ` Martin Kepplinger
2020-08-27 20:29                                                                                   ` Alan Stern
2020-08-29  7:24                                                                                     ` Martin Kepplinger
2020-08-29 15:26                                                                                       ` Alan Stern
2020-08-29 16:33                                                                                         ` Martin Kepplinger
2020-08-29 18:56                                                                                           ` Alan Stern
2020-08-30  0:38                                                                                             ` Bart Van Assche
2020-08-30  1:06                                                                                               ` Alan Stern
2020-07-29 15:40                                       ` [PATCH] scsi: sd: add runtime pm to open / release Alan Stern
2020-07-29 15:49                                         ` James Bottomley
2020-07-29 16:17                                           ` Alan Stern
2020-07-29 15:52                                         ` Martin Kepplinger
2020-07-29 18:10                                   ` Douglas Gilbert
2020-07-30  8:05             ` Martin Kepplinger
2020-07-30 15:14               ` Alan Stern

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200730151030.GB6332@rowland.harvard.edu \
    --to=stern@rowland.harvard.edu \
    --cc=James.Bottomley@hansenpartnership.com \
    --cc=bvanassche@acm.org \
    --cc=cang@codeaurora.org \
    --cc=kernel@puri.sm \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=martin.kepplinger@puri.sm \
    --cc=martin.petersen@oracle.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-SCSI Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-scsi/0 linux-scsi/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-scsi linux-scsi/ https://lore.kernel.org/linux-scsi \
		linux-scsi@vger.kernel.org
	public-inbox-index linux-scsi

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-scsi


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git