[PATCH 04/11] scsi: isci: port: link down: Pass gfp_t flags

["Ahmed S. Darwish" <a.darwish@linutronix.de>]

Use the new libsas event notifiers API, which requires callers to
explicitly pass the gfp_t memory allocation flags.

The libsas ->notify_phy_event() hook is exclusively called from
isci_port_link_down(). Below is the context analysis for all of its
call chains:

port.c: port_timeout(), atomic, timer callback                  (*)
spin_lock_irqsave(isci_host::scic_lock, )
  -> port_state_machine_change(..., SCI_PORT_FAILED)
    -> enter SCI port state: *SCI_PORT_FAILED*
      -> sci_port_failed_state_enter()
        -> isci_port_hard_reset_complete()
          -> isci_port_link_down()

port.c: isci_port_perform_hard_reset()
spin_lock_irqsave(isci_host::scic_lock, )
  -> port.c: sci_port_hard_reset(), atomic                      (*)
    -> phy.c: sci_phy_reset()
      -> sci_change_state(SCI_PHY_RESETTING)
        -> enter SCI PHY state: *SCI_PHY_RESETTING*
          -> sci_phy_resetting_state_enter()
            -> port.c: sci_port_deactivate_phy()
	      -> isci_port_link_down()

port.c: enter SCI port state: *SCI_PORT_READY*                  # Cont. from [1]
  -> sci_port_ready_state_enter()
    -> isci_port_hard_reset_complete()
      -> isci_port_link_down()

phy.c: enter SCI state: *SCI_PHY_STOPPED*                       # Cont. from [2]
  -> sci_phy_stopped_state_enter()
    -> host.c: sci_controller_link_down()
      -> ->link_down_handler()
      == port_config.c: sci_apc_agent_link_down()
        -> port.c: sci_port_remove_phy()
          -> sci_port_deactivate_phy()
            -> isci_port_link_down()
      == port_config.c: sci_mpc_agent_link_down()
        -> port.c: sci_port_link_down()
          -> sci_port_deactivate_phy()
            -> isci_port_link_down()

phy.c: enter SCI state: *SCI_PHY_STARTING*                      # Cont. from [3]
  -> sci_phy_starting_state_enter()
    -> host.c: sci_controller_link_down()
      -> ->link_down_handler()
      == port_config.c: sci_apc_agent_link_down()
        -> port.c: sci_port_remove_phy()
          -> isci_port_link_down()
      == port_config.c: sci_mpc_agent_link_down()
        -> port.c: sci_port_link_down()
          -> sci_port_deactivate_phy()
            -> isci_port_link_down()

[1] Call chains for 'enter SCI port state: *SCI_PORT_READY*'
------------------------------------------------------------

host.c: isci_host_init()                                        (@)
spin_lock_irq(isci_host::scic_lock)
  -> sci_controller_initialize(), atomic                        (*)
    -> port_config.c: sci_port_configuration_agent_initialize()
      -> sci_mpc_agent_validate_phy_configuration()
        -> port.c: sci_port_add_phy()
          -> sci_port_general_link_up_handler()
            -> port_state_machine_change(, SCI_PORT_READY)
              -> enter port state *SCI_PORT_READY*

host.c: isci_host_start()                                       (@)
spin_lock_irq(isci_host::scic_lock)
  -> host.c: sci_controller_start(), atomic                     (*)
    -> host.c: sci_port_start()
      -> port.c: port_state_machine_change(, SCI_PORT_READY)
        -> enter port state *SCI_PORT_READY*

port_config.c: apc_agent_timeout(), atomic, timer callback      (*)
  -> sci_apc_agent_configure_ports()
    -> port.c: sci_port_add_phy()
      -> sci_port_general_link_up_handler()
        -> port_state_machine_change(, SCI_PORT_READY)
          -> enter port state *SCI_PORT_READY*

port_config.c: mpc_agent_timeout(), atomic, timer callback      (*)
spin_lock_irqsave(isci_host::scic_lock, )
  -> ->link_up_handler()
  == port.c: sci_apc_agent_link_up()
    -> sci_port_general_link_up_handler()
      -> port_state_machine_change(, SCI_PORT_READY)
        -> enter port state *SCI_PORT_READY*
  == port.c: sci_mpc_agent_link_up()
    -> port.c: sci_port_link_up()
      -> sci_port_general_link_up_handler()
        -> port_state_machine_change(, SCI_PORT_READY)
          -> enter port state *SCI_PORT_READY*

phy.c: enter SCI state: SCI_PHY_SUB_FINAL                       # Cont. from [1A]
  -> sci_phy_starting_final_substate_enter()
    -> sci_change_state(SCI_PHY_READY)
      -> enter SCI state: *SCI_PHY_READY*
        -> sci_phy_ready_state_enter()
          -> host.c: sci_controller_link_up()
            -> port_agent.link_up_handler()
              -> port_config.c: [->link_up_handler = sci_apc_agent_link_up]
                 sci_apc_agent_link_up()
                  -> port.c: sci_port_link_up()
                    -> sci_port_general_link_up_handler()
                      -> port_state_machine_change(, SCI_PORT_READY)
                        -> enter port state *SCI_PORT_READY*
              -> port_config.c: [->link_up_handler = sci_mpc_agent_link_up]
                 sci_mpc_agent_link_up()
                  -> port.c: sci_port_link_up()
                    -> sci_port_general_link_up_handler()
                      -> port_state_machine_change(, SCI_PORT_READY)
                        -> enter port state *SCI_PORT_READY*

[1A] Call chains for entering SCI state: *SCI_PHY_SUB_FINAL*
------------------------------------------------------------

host.c: power_control_timeout(), atomic, timer callback         (*)
spin_lock_irqsave(isci_host::scic_lock, )
  -> phy.c: sci_phy_consume_power_handler()
    -> phy.c: sci_change_state(SCI_PHY_SUB_FINAL)

host.c: sci_controller_error_handler(): atomic, irq handler     (*)
OR host.c: sci_controller_completion_handler(), atomic, tasklet (*)
  -> sci_controller_process_completions()
    -> sci_controller_unsolicited_frame()
      -> phy.c: sci_phy_frame_handler()
        -> sci_change_state(SCI_PHY_SUB_AWAIT_SAS_POWER)
          -> sci_phy_starting_await_sas_power_substate_enter()
            -> host.c: sci_controller_power_control_queue_insert()
              -> phy.c: sci_phy_consume_power_handler()
                -> sci_change_state(SCI_PHY_SUB_FINAL)
        -> sci_change_state(SCI_PHY_SUB_FINAL)
    -> sci_controller_event_completion()
      -> phy.c: sci_phy_event_handler()
        -> sci_phy_start_sata_link_training()
          -> sci_change_state(SCI_PHY_SUB_AWAIT_SATA_POWER)
            -> sci_phy_starting_await_sata_power_substate_enter
              -> host.c: sci_controller_power_control_queue_insert()
                -> phy.c: sci_phy_consume_power_handler()
                  -> sci_change_state(SCI_PHY_SUB_FINAL)

[2] Call chains for entering state: *SCI_PHY_STOPPED*
-----------------------------------------------------

host.c: isci_host_init()                                        (@)
spin_lock_irq(isci_host::scic_lock)
  -> sci_controller_initialize(), atomic                        (*)
      -> phy.c: sci_phy_initialize()
        -> phy.c: sci_phy_link_layer_initialization()
          -> phy.c: sci_change_state(SCI_PHY_STOPPED)

init.c: PCI ->remove() || PM_OPS ->suspend,  process context    (+)
  -> host.c: isci_host_deinit()
    -> sci_controller_stop_phys()
      -> phy.c: sci_phy_stop()
	-> sci_change_state(SCI_PHY_STOPPED)

phy.c: isci_phy_control()
spin_lock_irqsave(isci_host::scic_lock, )
  -> sci_phy_stop(), atomic                                     (*)
    -> sci_change_state(SCI_PHY_STOPPED)

[3] Call chains for entering state: *SCI_PHY_STARTING*
------------------------------------------------------

phy.c: phy_sata_timeout(), atimer, timer callback               (*)
spin_lock_irqsave(isci_host::scic_lock, )
  -> sci_change_state(SCI_PHY_STARTING)

host.c: phy_startup_timeout(), atomic, timer callback           (*)
spin_lock_irqsave(isci_host::scic_lock, )
  -> sci_controller_start_next_phy()
    -> sci_phy_start()
      -> sci_change_state(SCI_PHY_STARTING)

host.c: isci_host_start()                                       (@)
spin_lock_irq(isci_host::scic_lock)
  -> sci_controller_start(), atomic                             (*)
    -> sci_controller_start_next_phy()
      -> sci_phy_start()
        -> sci_change_state(SCI_PHY_STARTING)

phy.c: Enter SCI state *SCI_PHY_SUB_FINAL*, atomic, check above (*)
  -> sci_change_state(SCI_PHY_SUB_FINAL)
    -> sci_phy_starting_final_substate_enter()
      -> sci_change_state(SCI_PHY_READY)
        -> Enter SCI state: *SCI_PHY_READY*
          -> sci_phy_ready_state_enter()
            -> host.c: sci_controller_link_up()
              -> sci_controller_start_next_phy()
                -> sci_phy_start()
                  -> sci_change_state(SCI_PHY_STARTING)

phy.c: sci_phy_event_handler(), atomic, discussed earlier       (*)
  -> sci_change_state(SCI_PHY_STARTING), 11 instances

phy.c: enter SCI state: *SCI_PHY_RESETTING*, atomic, discussed  (*)
  -> sci_phy_resetting_state_enter()
    -> sci_change_state(SCI_PHY_STARTING)

As can be seen from the "(*)" markers above, almost all the call-chains
are atomic. The only exception, marked with "(+)", is a PCI ->remove()
and PM_OPS ->suspend() cold path. Thus, pass GFP_ATOMIC to the libsas
phy event notifier.

Note, The now-replaced libsas APIs used in_interrupt() to implicitly
decide which memory allocation type to use.  This was only partially
correct, as it fails to choose the correct GFP flags when just
preemption or interrupts are disabled. Such buggy code paths are marked
with "(@)" in the call chains above.

Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Cc: stable@vger.kernel.org
Cc: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
---
 drivers/scsi/isci/port.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/isci/port.c b/drivers/scsi/isci/port.c
index 1df45f028ea7..c3a8c84b19a2 100644
--- a/drivers/scsi/isci/port.c
+++ b/drivers/scsi/isci/port.c
@@ -270,8 +270,9 @@ static void isci_port_link_down(struct isci_host *isci_host,
 	 * isci_port_deformed and isci_dev_gone functions.
 	 */
 	sas_phy_disconnected(&isci_phy->sas_phy);
-	isci_host->sas_ha.notify_phy_event(&isci_phy->sas_phy,
-					   PHYE_LOSS_OF_SIGNAL);
+	isci_host->sas_ha.notify_phy_event_gfp(&isci_phy->sas_phy,
+					       PHYE_LOSS_OF_SIGNAL,
+					       GFP_ATOMIC);
 
 	dev_dbg(&isci_host->pdev->dev,
 		"%s: isci_port = %p - Done\n", __func__, isci_port);
-- 
2.29.2