From: Hannes Reinecke <hare@suse.de>
To: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: James Bottomley <james.bottomley@hansenpartnership.com>,
Christoph Hellwig <hch@lst.de>,
John Garry <john.garry@huawei.com>,
linux-scsi@vger.kernel.org, Hannes Reinecke <hare@suse.de>,
Don Brace <don.brace@microchip.com>
Subject: [PATCH 13/31] hpsa: move hpsa_hba_inquiry after scsi_add_host()
Date: Mon, 22 Feb 2021 14:23:47 +0100 [thread overview]
Message-ID: <20210222132405.91369-14-hare@suse.de> (raw)
In-Reply-To: <20210222132405.91369-1-hare@suse.de>
Move hpsa_hba_inquiry to after scsi_add_host() so that the host
is fully initialized.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Tested-by: Don Brace <don.brace@microchip.com>
---
drivers/scsi/hpsa.c | 37 +++++++++++++++++++------------------
1 file changed, 19 insertions(+), 18 deletions(-)
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index 337d3aa91945..1603982dd5e8 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -5851,6 +5851,22 @@ static int hpsa_scsi_host_alloc(struct ctlr_info *h)
return 0;
}
+static void hpsa_hba_inquiry(struct ctlr_info *h)
+{
+ int rc;
+
+#define HBA_INQUIRY_BYTE_COUNT 64
+ h->hba_inquiry_data = kmalloc(HBA_INQUIRY_BYTE_COUNT, GFP_KERNEL);
+ if (!h->hba_inquiry_data)
+ return;
+ rc = hpsa_scsi_do_inquiry(h, RAID_CTLR_LUNID, 0,
+ h->hba_inquiry_data, HBA_INQUIRY_BYTE_COUNT);
+ if (rc != 0) {
+ kfree(h->hba_inquiry_data);
+ h->hba_inquiry_data = NULL;
+ }
+}
+
static int hpsa_scsi_add_host(struct ctlr_info *h)
{
int rv;
@@ -5860,6 +5876,9 @@ static int hpsa_scsi_add_host(struct ctlr_info *h)
dev_err(&h->pdev->dev, "scsi_add_host failed\n");
return rv;
}
+
+ hpsa_hba_inquiry(h);
+
scsi_scan_host(h->scsi_host);
return 0;
}
@@ -7912,22 +7931,6 @@ static int hpsa_pci_init(struct ctlr_info *h)
return err;
}
-static void hpsa_hba_inquiry(struct ctlr_info *h)
-{
- int rc;
-
-#define HBA_INQUIRY_BYTE_COUNT 64
- h->hba_inquiry_data = kmalloc(HBA_INQUIRY_BYTE_COUNT, GFP_KERNEL);
- if (!h->hba_inquiry_data)
- return;
- rc = hpsa_scsi_do_inquiry(h, RAID_CTLR_LUNID, 0,
- h->hba_inquiry_data, HBA_INQUIRY_BYTE_COUNT);
- if (rc != 0) {
- kfree(h->hba_inquiry_data);
- h->hba_inquiry_data = NULL;
- }
-}
-
static int hpsa_init_reset_devices(struct pci_dev *pdev, u32 board_id)
{
int rc, i;
@@ -8832,8 +8835,6 @@ static int hpsa_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
/* Turn the interrupts on so we can service requests */
h->access.set_intr_mask(h, HPSA_INTR_ON);
- hpsa_hba_inquiry(h);
-
h->lastlogicals = kzalloc(sizeof(*(h->lastlogicals)), GFP_KERNEL);
if (!h->lastlogicals)
dev_info(&h->pdev->dev,
--
2.29.2
next prev parent reply other threads:[~2021-02-22 13:31 UTC|newest]
Thread overview: 54+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-02-22 13:23 [PATCHv7 00/31] scsi: enable reserved commands for LLDDs Hannes Reinecke
2021-02-22 13:23 ` [PATCH 01/31] block: add flag for internal commands Hannes Reinecke
2021-02-22 13:23 ` [PATCH 02/31] scsi: add scsi_{get,put}_internal_cmd() helper Hannes Reinecke
2021-02-24 12:12 ` John Garry
2021-02-22 13:23 ` [PATCH 03/31] fnic: use internal commands Hannes Reinecke
2021-02-22 13:23 ` [PATCH 04/31] fnic: use scsi_host_busy_iter() to traverse commands Hannes Reinecke
2021-02-22 13:23 ` [PATCH 05/31] fnic: check for started requests in fnic_wq_copy_cleanup_handler() Hannes Reinecke
2021-02-22 13:23 ` [PATCH 06/31] scsi: use real inquiry data when initialising devices Hannes Reinecke
2021-02-22 13:23 ` [PATCH 07/31] scsi: Use dummy inquiry data for the host device Hannes Reinecke
2021-02-22 13:23 ` [PATCH 08/31] scsi: revamp host device handling Hannes Reinecke
2021-02-24 13:12 ` John Garry
2021-02-24 14:24 ` Hannes Reinecke
2021-02-24 14:31 ` John Garry
2021-02-24 14:35 ` Hannes Reinecke
2021-02-22 13:23 ` [PATCH 09/31] snic: use reserved commands Hannes Reinecke
2021-02-22 13:23 ` [PATCH 10/31] snic: use tagset iter for traversing commands Hannes Reinecke
2021-02-22 13:23 ` [PATCH 11/31] snic: check for started requests in snic_hba_reset_cmpl_handler() Hannes Reinecke
2021-02-22 13:23 ` [PATCH 12/31] scsi: implement reserved command handling Hannes Reinecke
2021-02-22 13:23 ` Hannes Reinecke [this message]
2021-02-22 13:23 ` [PATCH 14/31] hpsa: use reserved commands Hannes Reinecke
2021-03-11 22:03 ` michael.christie
2021-05-03 9:36 ` Hannes Reinecke
2021-02-22 13:23 ` [PATCH 15/31] hpsa: use scsi_host_busy_iter() to traverse outstanding commands Hannes Reinecke
2021-02-22 13:23 ` [PATCH 16/31] hpsa: drop refcount field from CommandList Hannes Reinecke
2021-02-22 13:23 ` [PATCH 17/31] aacraid: move scsi_add_host() Hannes Reinecke
2021-02-22 13:23 ` [PATCH 18/31] aacraid: store target id in host_scribble Hannes Reinecke
2021-02-22 13:23 ` [PATCH 19/31] aacraid: use scsi_get_internal_cmd() Hannes Reinecke
2021-02-22 13:23 ` [PATCH 20/31] aacraid: use scsi_host_busy_iter() to traverse outstanding commands Hannes Reinecke
2021-02-22 13:23 ` [PATCH 21/31] mv_sas: kill mvsas_debug_issue_ssp_tmf() Hannes Reinecke
2021-02-22 13:23 ` [PATCH 22/31] pm8001: kill pm8001_issue_ssp_tmf() Hannes Reinecke
2021-02-22 13:23 ` [PATCH 23/31] pm8001: kill 'dev' argument from pm8001_exec_internal_task_abort() Hannes Reinecke
2021-02-22 13:23 ` [PATCH 24/31] pm8001: use libsas-provided domain devices for SATA Hannes Reinecke
2021-02-22 13:23 ` [PATCH 25/31] libsas: add SCSI target pointer to struct domain_device Hannes Reinecke
2021-02-22 13:24 ` [PATCH 26/31] scsi: libsas,hisi_sas,mvsas,pm8001: Allocate Scsi_cmd for slow task Hannes Reinecke
2021-03-09 11:22 ` luojiaxing
2021-03-09 14:05 ` John Garry
2021-03-11 8:51 ` luojiaxing
2021-02-22 13:24 ` [PATCH 27/31] libsas: add tag to struct sas_task Hannes Reinecke
2021-02-22 13:24 ` [PATCH 28/31] scsi: hisi_sas: Use libsas slow task SCSI command Hannes Reinecke
2021-02-22 13:24 ` [PATCH 29/31] hisi_sas: use task tag to reference the slot Hannes Reinecke
2021-03-10 1:54 ` luojiaxing
2021-02-22 13:24 ` [PATCH 30/31] mv_sas: use reserved tags and drop private tag allocation Hannes Reinecke
2021-02-22 13:24 ` [PATCH 31/31] pm8001: use block-layer tags for ccb allocation Hannes Reinecke
2021-02-23 12:31 ` John Garry
2021-02-23 10:16 ` [PATCHv7 00/31] scsi: enable reserved commands for LLDDs John Garry
2021-02-23 17:50 ` John Garry
2021-02-24 6:54 ` Hannes Reinecke
2021-02-24 8:55 ` John Garry
2021-03-06 15:11 ` Don.Brace
2021-03-16 17:57 ` Don.Brace
2021-03-29 21:47 ` Don.Brace
2021-03-11 23:53 ` michael.christie
2021-03-12 16:08 ` Hannes Reinecke
2021-03-17 17:09 ` John Garry
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210222132405.91369-14-hare@suse.de \
--to=hare@suse.de \
--cc=don.brace@microchip.com \
--cc=hch@lst.de \
--cc=james.bottomley@hansenpartnership.com \
--cc=john.garry@huawei.com \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).