[Patch 2/3] mpt3sas: Handle FW faults during first half of IOC init

[Suganath Prabu S <suganath-prabu.subramani@broadcom.com>]

[-- Attachment #1: Type: text/plain, Size: 23533 bytes --]

Currently during first half of IOC initialization (i.e.
before going for device scanning), if any firmware faults
occurs then driver is aborting the IOC initialization
operation.

Through this patch, now the driver will issue diag reset
operation to recover IOC from fault state and will
reinitialize the IOC.

Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
---
 drivers/scsi/mpt3sas/mpt3sas_base.c   | 253 ++++++++++++++++++--------
 drivers/scsi/mpt3sas/mpt3sas_base.h   |   7 +
 drivers/scsi/mpt3sas/mpt3sas_config.c |  18 +-
 3 files changed, 201 insertions(+), 77 deletions(-)

diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c
index 68fde05..97e63a5 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_base.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.c
@@ -3365,14 +3365,14 @@ static int
 _base_diag_reset(struct MPT3SAS_ADAPTER *ioc);
 
 /**
- * _base_check_for_fault_and_issue_reset - check if IOC is in fault state
+ * mpt3sas_base_check_for_fault_and_issue_reset - check if IOC is in fault state
  *     and if it is in fault state then issue diag reset.
  * @ioc: per adapter object
  *
  * Return: 0 for success, non-zero for failure.
  */
-static int
-_base_check_for_fault_and_issue_reset(struct MPT3SAS_ADAPTER *ioc)
+int
+mpt3sas_base_check_for_fault_and_issue_reset(struct MPT3SAS_ADAPTER *ioc)
 {
 	u32 ioc_state;
 	int rc = -EFAULT;
@@ -3386,12 +3386,14 @@ _base_check_for_fault_and_issue_reset(struct MPT3SAS_ADAPTER *ioc)
 	if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT) {
 		mpt3sas_print_fault_code(ioc, ioc_state &
 		    MPI2_DOORBELL_DATA_MASK);
+		mpt3sas_base_mask_interrupts(ioc);
 		rc = _base_diag_reset(ioc);
 	} else if ((ioc_state & MPI2_IOC_STATE_MASK) ==
 	    MPI2_IOC_STATE_COREDUMP) {
 		mpt3sas_print_coredump_info(ioc, ioc_state &
 		     MPI2_DOORBELL_DATA_MASK);
 		mpt3sas_base_wait_for_coredump_completion(ioc, __func__);
+		mpt3sas_base_mask_interrupts(ioc);
 		rc = _base_diag_reset(ioc);
 	}
 
@@ -3473,7 +3475,7 @@ mpt3sas_base_map_resources(struct MPT3SAS_ADAPTER *ioc)
 
 	r = _base_get_ioc_facts(ioc);
 	if (r) {
-		rc = _base_check_for_fault_and_issue_reset(ioc);
+		rc = mpt3sas_base_check_for_fault_and_issue_reset(ioc);
 		if (rc || (_base_get_ioc_facts(ioc)))
 			goto out_fail;
 	}
@@ -4454,7 +4456,7 @@ _base_display_fwpkg_version(struct MPT3SAS_ADAPTER *ioc)
 	Mpi26ComponentImageHeader_t *cmp_img_hdr;
 	Mpi25FWUploadRequest_t *mpi_request;
 	Mpi2FWUploadReply_t mpi_reply;
-	int r = 0;
+	int r = 0, issue_diag_reset = 0;
 	u32  package_version = 0;
 	void *fwpkg_data = NULL;
 	dma_addr_t fwpkg_data_dma;
@@ -4504,7 +4506,7 @@ _base_display_fwpkg_version(struct MPT3SAS_ADAPTER *ioc)
 		ioc_err(ioc, "%s: timeout\n", __func__);
 		_debug_dump_mf(mpi_request,
 				sizeof(Mpi25FWUploadRequest_t)/4);
-		r = -ETIME;
+		issue_diag_reset = 1;
 	} else {
 		memset(&mpi_reply, 0, sizeof(Mpi2FWUploadReply_t));
 		if (ioc->base_cmds.status & MPT3_CMD_REPLY_VALID) {
@@ -4544,6 +4546,13 @@ out:
 	if (fwpkg_data)
 		dma_free_coherent(&ioc->pdev->dev, data_length, fwpkg_data,
 				fwpkg_data_dma);
+	if (issue_diag_reset) {
+		if (ioc->drv_internal_flags & MPT_DRV_INERNAL_FIRST_PE_ISSUED)
+			return -EFAULT;
+		if (mpt3sas_base_check_for_fault_and_issue_reset(ioc))
+			return -EFAULT;
+		r = -EAGAIN;
+	}
 	return r;
 }
 
@@ -4751,15 +4760,19 @@ out:
  *    according to performance mode.
  * @ioc : per adapter object
  *
- * Return: nothing.
+ * Return: zero on success; otherwise return EAGAIN error code asking the
+ * caller to retry.
  */
-static void
+static int
 _base_update_ioc_page1_inlinewith_perf_mode(struct MPT3SAS_ADAPTER *ioc)
 {
 	Mpi2IOCPage1_t ioc_pg1;
 	Mpi2ConfigReply_t mpi_reply;
+	int rc;
 
-	mpt3sas_config_get_ioc_pg1(ioc, &mpi_reply, &ioc->ioc_pg1_copy);
+	rc = mpt3sas_config_get_ioc_pg1(ioc, &mpi_reply, &ioc->ioc_pg1_copy);
+	if (rc)
+		return rc;
 	memcpy(&ioc_pg1, &ioc->ioc_pg1_copy, sizeof(Mpi2IOCPage1_t));
 
 	switch (perf_mode) {
@@ -4781,9 +4794,11 @@ _base_update_ioc_page1_inlinewith_perf_mode(struct MPT3SAS_ADAPTER *ioc)
 			 */
 			ioc_pg1.ProductSpecific = cpu_to_le32(0x80000000 |
 			    ((1 << MPT3SAS_HIGH_IOPS_REPLY_QUEUES/8) - 1));
-			mpt3sas_config_set_ioc_pg1(ioc, &mpi_reply, &ioc_pg1);
+			rc = mpt3sas_config_set_ioc_pg1(ioc, &mpi_reply, &ioc_pg1);
+			if (rc)
+				return rc;
 			ioc_info(ioc, "performance mode: balanced\n");
-			return;
+			return 0;
 		}
 		fallthrough;
 	case MPT_PERF_MODE_LATENCY:
@@ -4794,7 +4809,9 @@ _base_update_ioc_page1_inlinewith_perf_mode(struct MPT3SAS_ADAPTER *ioc)
 		ioc_pg1.CoalescingTimeout = cpu_to_le32(0xa);
 		ioc_pg1.Flags |= cpu_to_le32(MPI2_IOCPAGE1_REPLY_COALESCING);
 		ioc_pg1.ProductSpecific = 0;
-		mpt3sas_config_set_ioc_pg1(ioc, &mpi_reply, &ioc_pg1);
+		rc = mpt3sas_config_set_ioc_pg1(ioc, &mpi_reply, &ioc_pg1);
+		if (rc)
+			return rc;
 		ioc_info(ioc, "performance mode: latency\n");
 		break;
 	case MPT_PERF_MODE_IOPS:
@@ -4806,9 +4823,12 @@ _base_update_ioc_page1_inlinewith_perf_mode(struct MPT3SAS_ADAPTER *ioc)
 		    le32_to_cpu(ioc_pg1.CoalescingTimeout));
 		ioc_pg1.Flags |= cpu_to_le32(MPI2_IOCPAGE1_REPLY_COALESCING);
 		ioc_pg1.ProductSpecific = 0;
-		mpt3sas_config_set_ioc_pg1(ioc, &mpi_reply, &ioc_pg1);
+		rc = mpt3sas_config_set_ioc_pg1(ioc, &mpi_reply, &ioc_pg1);
+		if (rc)
+			return rc;
 		break;
 	}
+	return 0;
 }
 
 /**
@@ -4818,7 +4838,7 @@ _base_update_ioc_page1_inlinewith_perf_mode(struct MPT3SAS_ADAPTER *ioc)
  *
  * Return: nothing.
  */
-static void
+static int
 _base_get_event_diag_triggers(struct MPT3SAS_ADAPTER *ioc)
 {
 	Mpi26DriverTriggerPage2_t trigger_pg2;
@@ -4832,7 +4852,7 @@ _base_get_event_diag_triggers(struct MPT3SAS_ADAPTER *ioc)
 	r = mpt3sas_config_get_driver_trigger_pg2(ioc, &mpi_reply,
 	    &trigger_pg2);
 	if (r)
-		return;
+		return r;
 
 	ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
 	    MPI2_IOCSTATUS_MASK;
@@ -4841,7 +4861,7 @@ _base_get_event_diag_triggers(struct MPT3SAS_ADAPTER *ioc)
 		    ioc_err(ioc,
 		    "%s: Failed to get trigger pg2, ioc_status(0x%04x)\n",
 		   __func__, ioc_status));
-		return;
+		return 0;
 	}
 
 	if (le16_to_cpu(trigger_pg2.NumMPIEventTrigger)) {
@@ -4860,6 +4880,7 @@ _base_get_event_diag_triggers(struct MPT3SAS_ADAPTER *ioc)
 			mpi_event_tg++;
 		}
 	}
+	return 0;
 }
 
 /**
@@ -4867,9 +4888,9 @@ _base_get_event_diag_triggers(struct MPT3SAS_ADAPTER *ioc)
  *				persistent pages
  * @ioc : per adapter object
  *
- * Return: nothing.
+ * Return: 0 on success; otherwise return failure status.
  */
-static void
+static int
 _base_get_scsi_diag_triggers(struct MPT3SAS_ADAPTER *ioc)
 {
 	Mpi26DriverTriggerPage3_t trigger_pg3;
@@ -4883,7 +4904,7 @@ _base_get_scsi_diag_triggers(struct MPT3SAS_ADAPTER *ioc)
 	r = mpt3sas_config_get_driver_trigger_pg3(ioc, &mpi_reply,
 	    &trigger_pg3);
 	if (r)
-		return;
+		return r;
 
 	ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
 	    MPI2_IOCSTATUS_MASK;
@@ -4892,7 +4913,7 @@ _base_get_scsi_diag_triggers(struct MPT3SAS_ADAPTER *ioc)
 		    ioc_err(ioc,
 		    "%s: Failed to get trigger pg3, ioc_status(0x%04x)\n",
 		    __func__, ioc_status));
-		return;
+		return 0;
 	}
 
 	if (le16_to_cpu(trigger_pg3.NumSCSISenseTrigger)) {
@@ -4911,6 +4932,7 @@ _base_get_scsi_diag_triggers(struct MPT3SAS_ADAPTER *ioc)
 			mpi_scsi_tg++;
 		}
 	}
+	return 0;
 }
 
 /**
@@ -4918,9 +4940,9 @@ _base_get_scsi_diag_triggers(struct MPT3SAS_ADAPTER *ioc)
  *				persistent pages
  * @ioc : per adapter object
  *
- * Return: nothing.
+ * Return: 0 on success; otherwise return failure status.
  */
-static void
+static int
 _base_get_mpi_diag_triggers(struct MPT3SAS_ADAPTER *ioc)
 {
 	Mpi26DriverTriggerPage4_t trigger_pg4;
@@ -4934,7 +4956,7 @@ _base_get_mpi_diag_triggers(struct MPT3SAS_ADAPTER *ioc)
 	r = mpt3sas_config_get_driver_trigger_pg4(ioc, &mpi_reply,
 	    &trigger_pg4);
 	if (r)
-		return;
+		return r;
 
 	ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
 	    MPI2_IOCSTATUS_MASK;
@@ -4943,7 +4965,7 @@ _base_get_mpi_diag_triggers(struct MPT3SAS_ADAPTER *ioc)
 		    ioc_err(ioc,
 		    "%s: Failed to get trigger pg4, ioc_status(0x%04x)\n",
 		    __func__, ioc_status));
-		return;
+		return 0;
 	}
 
 	if (le16_to_cpu(trigger_pg4.NumIOCStatusLogInfoTrigger)) {
@@ -4964,6 +4986,7 @@ _base_get_mpi_diag_triggers(struct MPT3SAS_ADAPTER *ioc)
 			mpi_status_tg++;
 		}
 	}
+	return 0;
 }
 
 /**
@@ -4973,7 +4996,7 @@ _base_get_mpi_diag_triggers(struct MPT3SAS_ADAPTER *ioc)
  *
  * Return: nothing.
  */
-static void
+static int
 _base_get_master_diag_triggers(struct MPT3SAS_ADAPTER *ioc)
 {
 	Mpi26DriverTriggerPage1_t trigger_pg1;
@@ -4984,7 +5007,7 @@ _base_get_master_diag_triggers(struct MPT3SAS_ADAPTER *ioc)
 	r = mpt3sas_config_get_driver_trigger_pg1(ioc, &mpi_reply,
 	    &trigger_pg1);
 	if (r)
-		return;
+		return r;
 
 	ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
 	    MPI2_IOCSTATUS_MASK;
@@ -4993,25 +5016,30 @@ _base_get_master_diag_triggers(struct MPT3SAS_ADAPTER *ioc)
 		    ioc_err(ioc,
 		    "%s: Failed to get trigger pg1, ioc_status(0x%04x)\n",
 		   __func__, ioc_status));
-		return;
+		return 0;
 	}
 
 	if (le16_to_cpu(trigger_pg1.NumMasterTrigger))
 		ioc->diag_trigger_master.MasterData |=
 		    le32_to_cpu(
 		    trigger_pg1.MasterTriggers[0].MasterTriggerFlags);
+	return 0;
 }
 
 /**
  * _base_check_for_trigger_pages_support - checks whether HBA FW supports
  *					driver trigger pages or not
  * @ioc : per adapter object
+ * @trigger_flags : address where trigger page0's TriggerFlags value is copied
+ *
+ * Return: trigger flags mask if HBA FW supports driver trigger pages;
+ * otherwise returns %-EFAULT if driver trigger pages are not supported by FW or
+ * return EAGAIN if diag reset occurred due to FW fault and asking the
+ * caller to retry the command.
  *
- * Return: trigger flags mask if HBA FW supports driver trigger pages,
- * otherwise returns %-EFAULT.
  */
 static int
-_base_check_for_trigger_pages_support(struct MPT3SAS_ADAPTER *ioc)
+_base_check_for_trigger_pages_support(struct MPT3SAS_ADAPTER *ioc, u32 *trigger_flags)
 {
 	Mpi26DriverTriggerPage0_t trigger_pg0;
 	int r = 0;
@@ -5021,14 +5049,15 @@ _base_check_for_trigger_pages_support(struct MPT3SAS_ADAPTER *ioc)
 	r = mpt3sas_config_get_driver_trigger_pg0(ioc, &mpi_reply,
 	    &trigger_pg0);
 	if (r)
-		return -EFAULT;
+		return r;
 
 	ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
 	    MPI2_IOCSTATUS_MASK;
 	if (ioc_status != MPI2_IOCSTATUS_SUCCESS)
 		return -EFAULT;
 
-	return le16_to_cpu(trigger_pg0.TriggerFlags);
+	*trigger_flags = le16_to_cpu(trigger_pg0.TriggerFlags);
+	return 0;
 }
 
 /**
@@ -5036,12 +5065,14 @@ _base_check_for_trigger_pages_support(struct MPT3SAS_ADAPTER *ioc)
  *				persistent pages.
  * @ioc : per adapter object
  *
- * Return: nothing.
+ * Return: zero on success; otherwise return EAGAIN error codes
+ * asking the caller to retry.
  */
-static void
+static int
 _base_get_diag_triggers(struct MPT3SAS_ADAPTER *ioc)
 {
 	int trigger_flags;
+	int r;
 
 	/*
 	 * Default setting of master trigger.
@@ -5049,9 +5080,16 @@ _base_get_diag_triggers(struct MPT3SAS_ADAPTER *ioc)
 	ioc->diag_trigger_master.MasterData =
 	    (MASTER_TRIGGER_FW_FAULT + MASTER_TRIGGER_ADAPTER_RESET);
 
-	trigger_flags = _base_check_for_trigger_pages_support(ioc);
-	if (trigger_flags < 0)
-		return;
+	r = _base_check_for_trigger_pages_support(ioc, &trigger_flags);
+	if (r) {
+		if (r == -EAGAIN)
+			return r;
+		/*
+		 * Don't go for error handling when FW doesn't support
+		 * driver trigger pages.
+		 */
+		return 0;
+	}
 
 	ioc->supports_trigger_pages = 1;
 
@@ -5060,31 +5098,44 @@ _base_get_diag_triggers(struct MPT3SAS_ADAPTER *ioc)
 	 * if master trigger bit enabled in TriggerFlags.
 	 */
 	if ((u16)trigger_flags &
-	    MPI26_DRIVER_TRIGGER0_FLAG_MASTER_TRIGGER_VALID)
-		_base_get_master_diag_triggers(ioc);
+	    MPI26_DRIVER_TRIGGER0_FLAG_MASTER_TRIGGER_VALID) {
+		r = _base_get_master_diag_triggers(ioc);
+		if (r)
+			return r;
+	}
 
 	/*
 	 * Retrieve event diag trigger values from driver trigger pg2
 	 * if event trigger bit enabled in TriggerFlags.
 	 */
 	if ((u16)trigger_flags &
-	    MPI26_DRIVER_TRIGGER0_FLAG_MPI_EVENT_TRIGGER_VALID)
-		_base_get_event_diag_triggers(ioc);
+	    MPI26_DRIVER_TRIGGER0_FLAG_MPI_EVENT_TRIGGER_VALID) {
+		r = _base_get_event_diag_triggers(ioc);
+		if (r)
+			return r;
+	}
 
 	/*
 	 * Retrieve scsi diag trigger values from driver trigger pg3
 	 * if scsi trigger bit enabled in TriggerFlags.
 	 */
 	if ((u16)trigger_flags &
-	    MPI26_DRIVER_TRIGGER0_FLAG_SCSI_SENSE_TRIGGER_VALID)
-		_base_get_scsi_diag_triggers(ioc);
+	    MPI26_DRIVER_TRIGGER0_FLAG_SCSI_SENSE_TRIGGER_VALID) {
+		r = _base_get_scsi_diag_triggers(ioc);
+		if (r)
+			return r;
+	}
 	/*
 	 * Retrieve mpi error diag trigger values from driver trigger pg4
 	 * if loginfo trigger bit enabled in TriggerFlags.
 	 */
 	if ((u16)trigger_flags &
-	    MPI26_DRIVER_TRIGGER0_FLAG_LOGINFO_TRIGGER_VALID)
-		_base_get_mpi_diag_triggers(ioc);
+	    MPI26_DRIVER_TRIGGER0_FLAG_LOGINFO_TRIGGER_VALID) {
+		r = _base_get_mpi_diag_triggers(ioc);
+		if (r)
+			return r;
+	}
+	return 0;
 }
 
 /**
@@ -5120,23 +5171,33 @@ _base_update_diag_trigger_pages(struct MPT3SAS_ADAPTER *ioc)
  * _base_static_config_pages - static start of day config pages
  * @ioc: per adapter object
  */
-static void
+static int
 _base_static_config_pages(struct MPT3SAS_ADAPTER *ioc)
 {
 	Mpi2ConfigReply_t mpi_reply;
 	u32 iounit_pg1_flags;
 	int tg_flags = 0;
+	int rc;
 	ioc->nvme_abort_timeout = 30;
-	mpt3sas_config_get_manufacturing_pg0(ioc, &mpi_reply, &ioc->manu_pg0);
-	if (ioc->ir_firmware)
-		mpt3sas_config_get_manufacturing_pg10(ioc, &mpi_reply,
-		    &ioc->manu_pg10);
 
+	rc = mpt3sas_config_get_manufacturing_pg0(ioc, &mpi_reply,
+	    &ioc->manu_pg0);
+	if (rc)
+		return rc;
+	if (ioc->ir_firmware) {
+		rc = mpt3sas_config_get_manufacturing_pg10(ioc, &mpi_reply,
+		    &ioc->manu_pg10);
+		if (rc)
+			return rc;
+	}
 	/*
 	 * Ensure correct T10 PI operation if vendor left EEDPTagMode
 	 * flag unset in NVDATA.
 	 */
-	mpt3sas_config_get_manufacturing_pg11(ioc, &mpi_reply, &ioc->manu_pg11);
+	rc = mpt3sas_config_get_manufacturing_pg11(ioc, &mpi_reply,
+	    &ioc->manu_pg11);
+	if (rc)
+		return rc;
 	if (!ioc->is_gen35_ioc && ioc->manu_pg11.EEDPTagMode == 0) {
 		pr_err("%s: overriding NVDATA EEDPTagMode setting\n",
 		    ioc->name);
@@ -5175,12 +5236,24 @@ _base_static_config_pages(struct MPT3SAS_ADAPTER *ioc)
 			ioc_warn(ioc,
 			    "TimeSync Interval in Manuf page-11 is not enabled. Periodic Time-Sync will be disabled\n");
 	}
-	mpt3sas_config_get_bios_pg2(ioc, &mpi_reply, &ioc->bios_pg2);
-	mpt3sas_config_get_bios_pg3(ioc, &mpi_reply, &ioc->bios_pg3);
-	mpt3sas_config_get_ioc_pg8(ioc, &mpi_reply, &ioc->ioc_pg8);
-	mpt3sas_config_get_iounit_pg0(ioc, &mpi_reply, &ioc->iounit_pg0);
-	mpt3sas_config_get_iounit_pg1(ioc, &mpi_reply, &ioc->iounit_pg1);
-	mpt3sas_config_get_iounit_pg8(ioc, &mpi_reply, &ioc->iounit_pg8);
+	rc = mpt3sas_config_get_bios_pg2(ioc, &mpi_reply, &ioc->bios_pg2);
+	if (rc)
+		return rc;
+	rc = mpt3sas_config_get_bios_pg3(ioc, &mpi_reply, &ioc->bios_pg3);
+	if (rc)
+		return rc;
+	rc = mpt3sas_config_get_ioc_pg8(ioc, &mpi_reply, &ioc->ioc_pg8);
+	if (rc)
+		return rc;
+	rc = mpt3sas_config_get_iounit_pg0(ioc, &mpi_reply, &ioc->iounit_pg0);
+	if (rc)
+		return rc;
+	rc = mpt3sas_config_get_iounit_pg1(ioc, &mpi_reply, &ioc->iounit_pg1);
+	if (rc)
+		return rc;
+	rc = mpt3sas_config_get_iounit_pg8(ioc, &mpi_reply, &ioc->iounit_pg8);
+	if (rc)
+		return rc;
 	_base_display_ioc_capabilities(ioc);
 
 	/*
@@ -5196,16 +5269,23 @@ _base_static_config_pages(struct MPT3SAS_ADAPTER *ioc)
 		iounit_pg1_flags |=
 		    MPI2_IOUNITPAGE1_DISABLE_TASK_SET_FULL_HANDLING;
 	ioc->iounit_pg1.Flags = cpu_to_le32(iounit_pg1_flags);
-	mpt3sas_config_set_iounit_pg1(ioc, &mpi_reply, &ioc->iounit_pg1);
+	rc = mpt3sas_config_set_iounit_pg1(ioc, &mpi_reply, &ioc->iounit_pg1);
+	if (rc)
+		return rc;
 
 	if (ioc->iounit_pg8.NumSensors)
 		ioc->temp_sensors_count = ioc->iounit_pg8.NumSensors;
-	if (ioc->is_aero_ioc)
-		_base_update_ioc_page1_inlinewith_perf_mode(ioc);
+	if (ioc->is_aero_ioc) {
+		rc = _base_update_ioc_page1_inlinewith_perf_mode(ioc);
+		if (rc)
+			return rc;
+	}
 	if (ioc->is_gen35_ioc) {
-		if (ioc->is_driver_loading)
-			_base_get_diag_triggers(ioc);
-		else {
+		if (ioc->is_driver_loading) {
+			rc = _base_get_diag_triggers(ioc);
+			if (rc)
+				return rc;
+		} else {
 			/*
 			 * In case of online HBA FW update operation,
 			 * check whether updated FW supports the driver trigger
@@ -5217,7 +5297,7 @@ _base_static_config_pages(struct MPT3SAS_ADAPTER *ioc)
 			 *   and new FW doesn't support them then disable
 			 *   support_trigger_pages flag.
 			 */
-			tg_flags = _base_check_for_trigger_pages_support(ioc);
+			_base_check_for_trigger_pages_support(ioc, &tg_flags);
 			if (!ioc->supports_trigger_pages && tg_flags != -EFAULT)
 				_base_update_diag_trigger_pages(ioc);
 			else if (ioc->supports_trigger_pages &&
@@ -5225,6 +5305,7 @@ _base_static_config_pages(struct MPT3SAS_ADAPTER *ioc)
 				ioc->supports_trigger_pages = 0;
 		}
 	}
+	return 0;
 }
 
 /**
@@ -6481,6 +6562,17 @@ mpt3sas_wait_for_ioc(struct MPT3SAS_ADAPTER *ioc, int timeout)
 		ioc_state = mpt3sas_base_get_iocstate(ioc, 1);
 		if (ioc_state == MPI2_IOC_STATE_OPERATIONAL)
 			break;
+
+		/*
+		 * Watchdog thread will be started after IOC Initialization, so
+		 * no need to wait here for IOC state to become operational
+		 * when IOC Initialization is on. Instead the driver will
+		 * return ETIME status, so that calling function can issue
+		 * diag reset operation and retry the command.
+		 */
+		if (ioc->is_driver_loading)
+			return -ETIME;
+
 		ssleep(1);
 		ioc_info(ioc, "%s: waiting for operational state(count=%d)\n",
 				__func__, ++wait_state_count);
@@ -7214,7 +7306,7 @@ mpt3sas_port_enable(struct MPT3SAS_ADAPTER *ioc)
 		ioc_err(ioc, "%s: failed obtaining a smid\n", __func__);
 		return -EAGAIN;
 	}
-
+	ioc->drv_internal_flags |= MPT_DRV_INERNAL_FIRST_PE_ISSUED;
 	ioc->port_enable_cmds.status = MPT3_CMD_PENDING;
 	mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
 	ioc->port_enable_cmds.smid = smid;
@@ -7312,7 +7404,7 @@ _base_event_notification(struct MPT3SAS_ADAPTER *ioc)
 	Mpi2EventNotificationRequest_t *mpi_request;
 	u16 smid;
 	int r = 0;
-	int i;
+	int i, issue_diag_reset = 0;
 
 	dinitprintk(ioc, ioc_info(ioc, "%s\n", __func__));
 
@@ -7346,10 +7438,19 @@ _base_event_notification(struct MPT3SAS_ADAPTER *ioc)
 		if (ioc->base_cmds.status & MPT3_CMD_RESET)
 			r = -EFAULT;
 		else
-			r = -ETIME;
+			issue_diag_reset = 1;
+
 	} else
 		dinitprintk(ioc, ioc_info(ioc, "%s: complete\n", __func__));
 	ioc->base_cmds.status = MPT3_CMD_NOT_USED;
+
+	if (issue_diag_reset) {
+		if (ioc->drv_internal_flags & MPT_DRV_INERNAL_FIRST_PE_ISSUED)
+			return -EFAULT;
+		if (mpt3sas_base_check_for_fault_and_issue_reset(ioc))
+			return -EFAULT;
+		r = -EAGAIN;
+	}
 	return r;
 }
 
@@ -7713,7 +7814,7 @@ _base_make_ioc_operational(struct MPT3SAS_ADAPTER *ioc)
 		if (!ioc->is_driver_loading)
 			return r;
 
-		rc = _base_check_for_fault_and_issue_reset(ioc);
+		rc = mpt3sas_base_check_for_fault_and_issue_reset(ioc);
 		if (rc || (_base_send_ioc_init(ioc)))
 			return r;
 	}
@@ -7747,7 +7848,10 @@ _base_make_ioc_operational(struct MPT3SAS_ADAPTER *ioc)
 			return r;
 	}
 
-	_base_static_config_pages(ioc);
+	rc = _base_static_config_pages(ioc);
+	if (r)
+		return r;
+
 	r = _base_event_notification(ioc);
 	if (r)
 		return r;
@@ -7852,7 +7956,7 @@ mpt3sas_base_attach(struct MPT3SAS_ADAPTER *ioc)
 	pci_set_drvdata(ioc->pdev, ioc->shost);
 	r = _base_get_ioc_facts(ioc);
 	if (r) {
-		rc = _base_check_for_fault_and_issue_reset(ioc);
+		rc = mpt3sas_base_check_for_fault_and_issue_reset(ioc);
 		if (rc || (_base_get_ioc_facts(ioc)))
 			goto out_free_resources;
 	}
@@ -7924,7 +8028,7 @@ mpt3sas_base_attach(struct MPT3SAS_ADAPTER *ioc)
 	for (i = 0 ; i < ioc->facts.NumberOfPorts; i++) {
 		r = _base_get_port_facts(ioc, i);
 		if (r) {
-			rc = _base_check_for_fault_and_issue_reset(ioc);
+			rc = mpt3sas_base_check_for_fault_and_issue_reset(ioc);
 			if (rc || (_base_get_port_facts(ioc, i)))
 				goto out_free_resources;
 		}
@@ -8050,8 +8154,11 @@ mpt3sas_base_attach(struct MPT3SAS_ADAPTER *ioc)
 		}
 	}
 	r = _base_make_ioc_operational(ioc);
-	if (r)
-		goto out_free_resources;
+	if (r == -EAGAIN) {
+		r = _base_make_ioc_operational(ioc);
+		if (r)
+			goto out_free_resources;
+	}
 
 	/*
 	 * Copy current copy of IOCFacts in prev_fw_facts
diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h b/drivers/scsi/mpt3sas/mpt3sas_base.h
index 98558d9..a8100a9 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_base.h
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.h
@@ -1175,6 +1175,7 @@ typedef void (*MPT3SAS_FLUSH_RUNNING_CMDS)(struct MPT3SAS_ADAPTER *ioc);
  * @schedule_dead_ioc_flush_running_cmds: callback to flush pending commands
  * @thresh_hold: Max number of reply descriptors processed
  *				before updating Host Index
+ * @drv_internal_flags: Bit map internal to driver
  * @drv_support_bitmap: driver's supported feature bit map
  * @use_32bit_dma: Flag to use 32 bit consistent dma mask
  * @scsi_io_cb_idx: shost generated commands
@@ -1370,6 +1371,7 @@ struct MPT3SAS_ADAPTER {
 	bool            msix_load_balance;
 	u16		thresh_hold;
 	u8		high_iops_queues;
+	u32             drv_internal_flags;
 	u32		drv_support_bitmap;
 	u32             dma_mask;
 	bool		enable_sdev_max_qd;
@@ -1615,6 +1617,8 @@ struct mpt3sas_debugfs_buffer {
 #define MPT_DRV_SUPPORT_BITMAP_MEMMOVE 0x00000001
 #define MPT_DRV_SUPPORT_BITMAP_ADDNLQUERY	0x00000002
 
+#define MPT_DRV_INERNAL_FIRST_PE_ISSUED		0x00000001
+
 typedef u8 (*MPT_CALLBACK)(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
 	u32 reply);
 
@@ -1709,6 +1713,9 @@ void mpt3sas_halt_firmware(struct MPT3SAS_ADAPTER *ioc);
 void mpt3sas_base_update_missing_delay(struct MPT3SAS_ADAPTER *ioc,
 	u16 device_missing_delay, u8 io_missing_delay);
 
+int mpt3sas_base_check_for_fault_and_issue_reset(
+	struct MPT3SAS_ADAPTER *ioc);
+
 int mpt3sas_port_enable(struct MPT3SAS_ADAPTER *ioc);
 
 void
diff --git a/drivers/scsi/mpt3sas/mpt3sas_config.c b/drivers/scsi/mpt3sas/mpt3sas_config.c
index 55cd329..3b2c4f1 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_config.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_config.c
@@ -359,8 +359,11 @@ _config_request(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigRequest_t
 	}
 
 	r = mpt3sas_wait_for_ioc(ioc, MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT);
-	if (r)
+	if (r) {
+		if (r == -ETIME)
+			issue_host_reset = 1;
 		goto free_mem;
+	}
 
 	smid = mpt3sas_base_get_smid(ioc, ioc->config_cb_idx);
 	if (!smid) {
@@ -395,7 +398,6 @@ _config_request(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigRequest_t
 		    MPT3_CMD_RESET) || ioc->pci_error_recovery)
 			goto retry_config;
 		issue_host_reset = 1;
-		r = -EFAULT;
 		goto free_mem;
 	}
 
@@ -486,8 +488,16 @@ _config_request(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigRequest_t
 	ioc->config_cmds.status = MPT3_CMD_NOT_USED;
 	mutex_unlock(&ioc->config_cmds.mutex);
 
-	if (issue_host_reset)
-		mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER);
+	if (issue_host_reset) {
+		if (ioc->drv_internal_flags & MPT_DRV_INERNAL_FIRST_PE_ISSUED) {
+			mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER);
+			r = -EFAULT;
+		} else {
+			if (mpt3sas_base_check_for_fault_and_issue_reset(ioc))
+				return -EFAULT;
+			r = -EAGAIN;
+		}
+	}
 	return r;
 }
 
-- 
2.27.0


[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4245 bytes --]