linux-scsi.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Bart Van Assche <bvanassche@acm.org>
To: "Martin K . Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org, Jaegeuk Kim <jaegeuk@kernel.org>,
	Bart Van Assche <bvanassche@acm.org>,
	Stanley Chu <stanley.chu@mediatek.com>,
	Can Guo <cang@codeaurora.org>, Bean Huo <beanhuo@micron.com>,
	Asutosh Das <asutoshd@codeaurora.org>,
	"James E.J. Bottomley" <jejb@linux.ibm.com>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	Avri Altman <avri.altman@wdc.com>,
	Adrian Hunter <adrian.hunter@intel.com>,
	Kiwoong Kim <kwmad.kim@samsung.com>,
	Keoseong Park <keosung.park@samsung.com>
Subject: [PATCH v3 12/18] scsi: ufs: Optimize serialization of setup_xfer_req() calls
Date: Wed, 21 Jul 2021 20:34:33 -0700	[thread overview]
Message-ID: <20210722033439.26550-13-bvanassche@acm.org> (raw)
In-Reply-To: <20210722033439.26550-1-bvanassche@acm.org>

Reduce the number of times the host lock is taken in the hot path.
Additionally, inline ufshcd_vops_setup_xfer_req() because that function is
too short to keep it.

Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Stanley Chu <stanley.chu@mediatek.com>
Cc: Can Guo <cang@codeaurora.org>
Cc: Bean Huo <beanhuo@micron.com>
Cc: Asutosh Das <asutoshd@codeaurora.org>
Fixes: a45f937110fa ("scsi: ufs: Optimize host lock on transfer requests send/compl paths")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
 drivers/scsi/ufs/ufshcd.c |  3 ++-
 drivers/scsi/ufs/ufshcd.h | 12 ------------
 2 files changed, 2 insertions(+), 13 deletions(-)

diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index cb588b705fbb..436d814f4c1e 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -2091,12 +2091,13 @@ void ufshcd_send_command(struct ufs_hba *hba, unsigned int task_tag)
 
 	lrbp->issue_time_stamp = ktime_get();
 	lrbp->compl_time_stamp = ktime_set(0, 0);
-	ufshcd_vops_setup_xfer_req(hba, task_tag, (lrbp->cmd ? true : false));
 	ufshcd_add_command_trace(hba, task_tag, UFS_CMD_SEND);
 	ufshcd_clk_scaling_start_busy(hba);
 	if (unlikely(ufshcd_should_inform_monitor(hba, lrbp)))
 		ufshcd_start_monitor(hba, lrbp);
 	spin_lock_irqsave(hba->host->host_lock, flags);
+	if (hba->vops && hba->vops->setup_xfer_req)
+		hba->vops->setup_xfer_req(hba, task_tag, !!lrbp->cmd);
 	set_bit(task_tag, &hba->outstanding_reqs);
 	ufshcd_writel(hba, 1 << task_tag, REG_UTP_TRANSFER_REQ_DOOR_BELL);
 	spin_unlock_irqrestore(hba->host->host_lock, flags);
diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
index a44baec43dd5..6df847facd1d 100644
--- a/drivers/scsi/ufs/ufshcd.h
+++ b/drivers/scsi/ufs/ufshcd.h
@@ -1237,18 +1237,6 @@ static inline int ufshcd_vops_pwr_change_notify(struct ufs_hba *hba,
 	return -ENOTSUPP;
 }
 
-static inline void ufshcd_vops_setup_xfer_req(struct ufs_hba *hba, int tag,
-					bool is_scsi_cmd)
-{
-	if (hba->vops && hba->vops->setup_xfer_req) {
-		unsigned long flags;
-
-		spin_lock_irqsave(hba->host->host_lock, flags);
-		hba->vops->setup_xfer_req(hba, tag, is_scsi_cmd);
-		spin_unlock_irqrestore(hba->host->host_lock, flags);
-	}
-}
-
 static inline void ufshcd_vops_setup_task_mgmt(struct ufs_hba *hba,
 					int tag, u8 tm_function)
 {

  parent reply	other threads:[~2021-07-22  3:35 UTC|newest]

Thread overview: 67+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-07-22  3:34 [PATCH v3 00/18] UFS patches for kernel v5.15 Bart Van Assche
2021-07-22  3:34 ` [PATCH v3 01/18] scsi: ufs: Fix memory corruption by ufshcd_read_desc_param() Bart Van Assche
2021-07-25 12:40   ` Avri Altman
2021-07-22  3:34 ` [PATCH v3 02/18] scsi: ufs: Reduce power management code duplication Bart Van Assche
2021-07-31 14:44   ` Stanley Chu
2021-07-22  3:34 ` [PATCH v3 03/18] scsi: ufs: Only include power management code if necessary Bart Van Assche
2021-07-22  3:34 ` [PATCH v3 04/18] scsi: ufs: Rename the second ufshcd_probe_hba() argument Bart Van Assche
2021-08-02  8:17   ` Stanley Chu
2021-07-22  3:34 ` [PATCH v3 05/18] scsi: ufs: Use DECLARE_COMPLETION_ONSTACK() where appropriate Bart Van Assche
2021-07-22  3:34 ` [PATCH v3 06/18] scsi: ufs: Remove ufshcd_valid_tag() Bart Van Assche
2021-07-22  3:34 ` [PATCH v3 07/18] scsi: ufs: Verify UIC locking requirements at runtime Bart Van Assche
2021-07-22  3:34 ` [PATCH v3 08/18] scsi: ufs: Improve static type checking for the host controller state Bart Van Assche
2021-07-22  3:34 ` [PATCH v3 09/18] scsi: ufs: Remove several wmb() calls Bart Van Assche
2021-07-25 13:20   ` Avri Altman
2021-07-22  3:34 ` [PATCH v3 10/18] scsi: ufs: Inline ufshcd_outstanding_req_clear() Bart Van Assche
2021-07-29  7:42   ` Bean Huo
2021-07-22  3:34 ` [PATCH v3 11/18] scsi: ufs: Revert "Utilize Transfer Request List Completion Notification Register" Bart Van Assche
2021-07-29  8:03   ` Bean Huo
2021-07-29 16:10     ` Bart Van Assche
2021-07-29 16:13       ` Bart Van Assche
2021-07-29 21:14         ` Bean Huo
2021-08-02 15:24   ` Bean Huo
2021-08-03 18:49     ` Bart Van Assche
2021-07-22  3:34 ` Bart Van Assche [this message]
2021-07-29  8:07   ` [PATCH v3 12/18] scsi: ufs: Optimize serialization of setup_xfer_req() calls Bean Huo
2021-07-22  3:34 ` [PATCH v3 13/18] scsi: ufs: Optimize SCSI command processing Bart Van Assche
2021-07-29  9:12   ` Bean Huo
2021-07-29 16:11     ` Bart Van Assche
2021-08-02 12:11   ` Bean Huo
2021-07-22  3:34 ` [PATCH v3 14/18] scsi: ufs: Fix the SCSI abort handler Bart Van Assche
2021-08-02 13:15   ` Bean Huo
2021-07-22  3:34 ` [PATCH v3 15/18] scsi: ufs: Request sense data asynchronously Bart Van Assche
2021-08-02 13:16   ` Bean Huo
2021-07-22  3:34 ` [PATCH v3 16/18] scsi: ufs: Synchronize SCSI and UFS error handling Bart Van Assche
2021-08-02 14:24   ` Bean Huo
2021-08-28  9:47   ` Adrian Hunter
2021-08-29  7:17     ` Avri Altman
2021-08-29 21:33       ` Bart Van Assche
2021-08-29  9:57     ` Adrian Hunter
2021-08-29 22:18     ` Bart Van Assche
2021-08-31  7:24       ` Adrian Hunter
2021-08-31 10:04         ` Adrian Hunter
2021-08-31 17:18         ` Bart Van Assche
2021-09-01  7:42           ` Adrian Hunter
2021-09-01 20:46             ` Bart Van Assche
2021-09-02  6:02               ` Adrian Hunter
2021-07-22  3:34 ` [PATCH v3 17/18] scsi: ufs: Retry aborted SCSI commands instead of completing these successfully Bart Van Assche
2021-08-02 15:03   ` Bean Huo
2021-07-22  3:34 ` [PATCH v3 18/18] scsi: ufs: Add fault injection support Bart Van Assche
2021-08-02 15:03   ` Bean Huo
     [not found] ` <CGME20210722033524epcas2p31e41c1db6883aaa644edf23bbe8a1ca2@epcms2p4>
2021-07-28  6:48   ` [PATCH v3 06/18] scsi: ufs: Remove ufshcd_valid_tag() Daejun Park
2021-07-28 22:48     ` Bart Van Assche
     [not found]     ` <CGME20210722033524epcas2p31e41c1db6883aaa644edf23bbe8a1ca2@epcms2p7>
2021-07-29  0:26       ` Daejun Park
     [not found] ` <CGME20210722033530epcas2p4c76293e5fc5163fed3995acdd02678ce@epcms2p1>
2021-07-28  7:56   ` [PATCH v3 08/18] scsi: ufs: Improve static type checking for the host controller state Keoseong Park
     [not found] ` <CGME20210722033504epcas2p1cc3c6f61e81814004c36b89c7c9e3dd5@epcms2p5>
2021-07-29  0:56   ` [PATCH v3 01/18] scsi: ufs: Fix memory corruption by ufshcd_read_desc_param() Daejun Park
     [not found] ` <CGME20210722033510epcas2p410be4f2f387e98babeefc754a9fc1414@epcms2p2>
2021-07-29  0:56   ` [PATCH v3 02/18] scsi: ufs: Reduce power management code duplication Daejun Park
     [not found] ` <CGME20210722033513epcas2p22e4c2e6ea644992ede2739ebe381d53f@epcms2p8>
2021-07-29  0:56   ` [PATCH v3 03/18] scsi: ufs: Only include power management code if necessary Daejun Park
2021-07-31 14:48     ` Stanley Chu
     [not found] ` <CGME20210722033520epcas2p31c6f801eda7f100491c85e3f9c7d6600@epcms2p6>
2021-07-29  0:56   ` [PATCH v3 04/18] scsi: ufs: Rename the second ufshcd_probe_hba() argument Daejun Park
     [not found] ` <CGME20210722033523epcas2p22ea9a4afaeb46870638ff4429010a3c1@epcms2p7>
2021-07-29  0:57   ` [PATCH v3 05/18] scsi: ufs: Use DECLARE_COMPLETION_ONSTACK() where appropriate Daejun Park
     [not found] ` <CGME20210722033527epcas2p384eefb77dff85f5d8d59beede98b6bdc@epcms2p4>
2021-07-29  0:57   ` [PATCH v3 07/18] scsi: ufs: Verify UIC locking requirements at runtime Daejun Park
     [not found] ` <CGME20210722033531epcas2p4a4a975689ad7966d3db56dd81a7a255f@epcms2p1>
2021-07-29  0:57   ` [PATCH v3 08/18] scsi: ufs: Improve static type checking for the host controller state Daejun Park
     [not found] ` <CGME20210722033536epcas2p133eef1f5e2e5a1022ccef23e9c1035aa@epcms2p5>
2021-07-29  1:24   ` [PATCH v3 09/18] scsi: ufs: Remove several wmb() calls Daejun Park
     [not found] ` <CGME20210722033552epcas2p39f68ea806091ffa9755a25b778d70101@epcms2p2>
2021-07-29  1:25   ` [PATCH v3 12/18] scsi: ufs: Optimize serialization of setup_xfer_req() calls Daejun Park
     [not found] ` <CGME20210722033553epcas2p2818d9c1f046e8514415a72a4ddddc3db@epcms2p1>
2021-07-29  1:25   ` [PATCH v3 13/18] scsi: ufs: Optimize SCSI command processing Daejun Park
2021-08-03  2:13 ` [PATCH v3 00/18] UFS patches for kernel v5.15 Martin K. Petersen
2021-08-10  5:20 ` Martin K. Petersen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210722033439.26550-13-bvanassche@acm.org \
    --to=bvanassche@acm.org \
    --cc=adrian.hunter@intel.com \
    --cc=asutoshd@codeaurora.org \
    --cc=avri.altman@wdc.com \
    --cc=beanhuo@micron.com \
    --cc=cang@codeaurora.org \
    --cc=jaegeuk@kernel.org \
    --cc=jejb@linux.ibm.com \
    --cc=keosung.park@samsung.com \
    --cc=kwmad.kim@samsung.com \
    --cc=linux-scsi@vger.kernel.org \
    --cc=martin.petersen@oracle.com \
    --cc=matthias.bgg@gmail.com \
    --cc=stanley.chu@mediatek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).