linux-scsi.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Manivannan Sadhasivam <mani@kernel.org>
To: Asutosh Das <quic_asutoshd@quicinc.com>
Cc: quic_cang@quicinc.com, martin.petersen@oracle.com,
	linux-scsi@vger.kernel.org, quic_nguyenb@quicinc.com,
	quic_xiaosenh@quicinc.com, stanley.chu@mediatek.com,
	eddie.huang@mediatek.com, daejun7.park@samsung.com,
	bvanassche@acm.org, avri.altman@wdc.com, beanhuo@micron.com,
	linux-arm-msm@vger.kernel.org,
	Alim Akhtar <alim.akhtar@samsung.com>,
	"James E.J. Bottomley" <jejb@linux.ibm.com>,
	Andy Gross <agross@kernel.org>,
	Bjorn Andersson <andersson@kernel.org>,
	Konrad Dybcio <konrad.dybcio@somainline.org>,
	Jinyoung Choi <j-young.choi@samsung.com>,
	Arthur Simchaev <Arthur.Simchaev@wdc.com>,
	Kiwoong Kim <kwmad.kim@samsung.com>,
	open list <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v5 07/16] ufs: core: mcq: Calculate queue depth
Date: Mon, 28 Nov 2022 20:45:12 +0530	[thread overview]
Message-ID: <20221128151512.GF62721@thinkpad> (raw)
In-Reply-To: <ae139f730dcec6462f9218856bf974eda4a29e1d.1669176158.git.quic_asutoshd@quicinc.com>

On Tue, Nov 22, 2022 at 08:10:20PM -0800, Asutosh Das wrote:
> The ufs device defines the supported queuedepth by
> bqueuedepth which has a max value of 256.
> The HC defines MAC (Max Active Commands) that define
> the max number of commands that in flight to the ufs
> device.
> Calculate and configure the nutrs based on both these
> values.
> 
> Co-developed-by: Can Guo <quic_cang@quicinc.com>
> Signed-off-by: Can Guo <quic_cang@quicinc.com>
> Signed-off-by: Asutosh Das <quic_asutoshd@quicinc.com>
> ---
>  drivers/ufs/core/ufs-mcq.c     | 32 ++++++++++++++++++++++++++++++++
>  drivers/ufs/core/ufshcd-priv.h |  9 +++++++++
>  drivers/ufs/core/ufshcd.c      | 17 ++++++++++++++++-
>  drivers/ufs/host/ufs-qcom.c    |  8 ++++++++
>  include/ufs/ufs.h              |  2 ++
>  include/ufs/ufshcd.h           |  2 ++
>  include/ufs/ufshci.h           |  1 +
>  7 files changed, 70 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/ufs/core/ufs-mcq.c b/drivers/ufs/core/ufs-mcq.c
> index 4aaa6aa..e95f748 100644
> --- a/drivers/ufs/core/ufs-mcq.c
> +++ b/drivers/ufs/core/ufs-mcq.c
> @@ -18,6 +18,8 @@
>  #define UFS_MCQ_NUM_DEV_CMD_QUEUES 1
>  #define UFS_MCQ_MIN_POLL_QUEUES 0
>  
> +#define MAX_DEV_CMD_ENTRIES	2
> +#define MCQ_CFG_MAC_MASK	GENMASK(16, 8)
>  #define MCQ_QCFGPTR_MASK	GENMASK(7, 0)
>  #define MCQ_QCFGPTR_UNIT	0x200
>  #define MCQ_SQATTR_OFFSET(c) \
> @@ -88,6 +90,36 @@ static const struct ufshcd_res_info ufs_res_info[RES_MAX] = {
>  	{.name = "mcq_vs",},
>  };
>  
> +/**
> + * ufshcd_mcq_decide_queue_depth - decide the queue depth
> + * @hba - per adapter instance
> + *

Kernel doc should define the return value also.

> + * MAC - Max. Active Command of the Host Controller (HC)
> + * HC wouldn't send more than this commands to the device.
> + * It is mandatory to implement get_hba_mac() to enable MCQ mode.
> + * Calculates and adjusts the queue depth based on the depth
> + * supported by the HC and ufs device.
> + */
> +int ufshcd_mcq_decide_queue_depth(struct ufs_hba *hba)
> +{
> +	int mac;
> +
> +	/* Mandatory to implement get_hba_mac() */
> +	mac = ufshcd_mcq_vops_get_hba_mac(hba);
> +	if (mac < 0) {
> +		dev_err(hba->dev, "Failed to get mac, err=%d\n", mac);
> +		return mac;
> +	}
> +
> +	WARN_ON(!hba->dev_info.bqueuedepth);

Instead of panic, you could just print and return an error.

> +	/*
> +	 * max. value of bqueuedepth = 256, mac is host dependent.
> +	 * It is mandatory for UFS device to define bQueueDepth if
> +	 * shared queuing architecture is enabled.
> +	 */
> +	return min_t(int, mac, hba->dev_info.bqueuedepth);
> +}
> +
>  static int ufshcd_mcq_config_resource(struct ufs_hba *hba)
>  {
>  	struct platform_device *pdev = to_platform_device(hba->dev);
> diff --git a/drivers/ufs/core/ufshcd-priv.h b/drivers/ufs/core/ufshcd-priv.h
> index 9368ba2..9f40fa5 100644
> --- a/drivers/ufs/core/ufshcd-priv.h
> +++ b/drivers/ufs/core/ufshcd-priv.h
> @@ -62,6 +62,7 @@ int ufshcd_query_flag(struct ufs_hba *hba, enum query_opcode opcode,
>  	enum flag_idn idn, u8 index, bool *flag_res);
>  void ufshcd_auto_hibern8_update(struct ufs_hba *hba, u32 ahit);
>  int ufshcd_mcq_init(struct ufs_hba *hba);
> +int ufshcd_mcq_decide_queue_depth(struct ufs_hba *hba);
>  
>  #define SD_ASCII_STD true
>  #define SD_RAW false
> @@ -227,6 +228,14 @@ static inline void ufshcd_vops_config_scaling_param(struct ufs_hba *hba,
>  		hba->vops->config_scaling_param(hba, p, data);
>  }
>  
> +static inline int ufshcd_mcq_vops_get_hba_mac(struct ufs_hba *hba)

Again, no inline please.

> +{
> +	if (hba->vops && hba->vops->get_hba_mac)
> +		return hba->vops->get_hba_mac(hba);
> +
> +	return -EOPNOTSUPP;
> +}
> +
>  extern const struct ufs_pm_lvl_states ufs_pm_lvl_states[];
>  
>  /**
> diff --git a/drivers/ufs/core/ufshcd.c b/drivers/ufs/core/ufshcd.c
> index 0c4cd8f..ae065da 100644
> --- a/drivers/ufs/core/ufshcd.c
> +++ b/drivers/ufs/core/ufshcd.c
> @@ -7783,6 +7783,7 @@ static int ufs_get_device_desc(struct ufs_hba *hba)
>  	/* getting Specification Version in big endian format */
>  	dev_info->wspecversion = desc_buf[DEVICE_DESC_PARAM_SPEC_VER] << 8 |
>  				      desc_buf[DEVICE_DESC_PARAM_SPEC_VER + 1];
> +	dev_info->bqueuedepth = desc_buf[DEVICE_DESC_PARAM_Q_DPTH];
>  	b_ufs_feature_sup = desc_buf[DEVICE_DESC_PARAM_UFS_FEAT];
>  
>  	model_index = desc_buf[DEVICE_DESC_PARAM_PRDCT_NAME];
> @@ -8198,7 +8199,21 @@ static int ufshcd_add_lus(struct ufs_hba *hba)
>  
>  static int ufshcd_alloc_mcq(struct ufs_hba *hba)
>  {
> -	return ufshcd_mcq_init(hba);
> +	int ret;
> +	int old_nutrs = hba->nutrs;
> +
> +	ret = ufshcd_mcq_decide_queue_depth(hba);
> +	if (ret < 0)
> +		return ret;
> +
> +	hba->nutrs = ret;
> +	ret = ufshcd_mcq_init(hba);
> +	if (ret) {
> +		hba->nutrs = old_nutrs;
> +		return ret;
> +	}
> +
> +	return 0;
>  }
>  
>  /**
> diff --git a/drivers/ufs/host/ufs-qcom.c b/drivers/ufs/host/ufs-qcom.c
> index 8ad1415..7bd3c37 100644
> --- a/drivers/ufs/host/ufs-qcom.c
> +++ b/drivers/ufs/host/ufs-qcom.c
> @@ -25,6 +25,7 @@
>  #define UFS_QCOM_DEFAULT_DBG_PRINT_EN	\
>  	(UFS_QCOM_DBG_PRINT_REGS_EN | UFS_QCOM_DBG_PRINT_TEST_BUS_EN)
>  
> +#define MAX_SUPP_MAC 64

Similar definitions are part of ufs-qcom.h.

Thanks,
Mani

>  enum {
>  	TSTBUS_UAWM,
>  	TSTBUS_UARM,
> @@ -1424,6 +1425,12 @@ static void ufs_qcom_config_scaling_param(struct ufs_hba *hba,
>  }
>  #endif
>  
> +static int ufs_qcom_get_hba_mac(struct ufs_hba *hba)
> +{
> +	/* Qualcomm HC supports up to 64 */
> +	return MAX_SUPP_MAC;
> +}
> +
>  /*
>   * struct ufs_hba_qcom_vops - UFS QCOM specific variant operations
>   *
> @@ -1447,6 +1454,7 @@ static const struct ufs_hba_variant_ops ufs_hba_qcom_vops = {
>  	.device_reset		= ufs_qcom_device_reset,
>  	.config_scaling_param = ufs_qcom_config_scaling_param,
>  	.program_key		= ufs_qcom_ice_program_key,
> +	.get_hba_mac		= ufs_qcom_get_hba_mac,
>  };
>  
>  /**
> diff --git a/include/ufs/ufs.h b/include/ufs/ufs.h
> index ba2a1d8..5112418 100644
> --- a/include/ufs/ufs.h
> +++ b/include/ufs/ufs.h
> @@ -591,6 +591,8 @@ struct ufs_dev_info {
>  	u8	*model;
>  	u16	wspecversion;
>  	u32	clk_gating_wait_us;
> +	/* Stores the depth of queue in UFS device */
> +	u8	bqueuedepth;
>  
>  	/* UFS HPB related flag */
>  	bool	hpb_enabled;
> diff --git a/include/ufs/ufshcd.h b/include/ufs/ufshcd.h
> index 7bf7599..e03b310 100644
> --- a/include/ufs/ufshcd.h
> +++ b/include/ufs/ufshcd.h
> @@ -297,6 +297,7 @@ struct ufs_pwr_mode_info {
>   * @config_scaling_param: called to configure clock scaling parameters
>   * @program_key: program or evict an inline encryption key
>   * @event_notify: called to notify important events
> + * @get_hba_mac: called to get vendor specific mac value, mandatory for mcq mode
>   */
>  struct ufs_hba_variant_ops {
>  	const char *name;
> @@ -335,6 +336,7 @@ struct ufs_hba_variant_ops {
>  			       const union ufs_crypto_cfg_entry *cfg, int slot);
>  	void	(*event_notify)(struct ufs_hba *hba,
>  				enum ufs_event_type evt, void *data);
> +	int	(*get_hba_mac)(struct ufs_hba *hba);
>  };
>  
>  /* clock gating state  */
> diff --git a/include/ufs/ufshci.h b/include/ufs/ufshci.h
> index 4d4da06..67fcebd 100644
> --- a/include/ufs/ufshci.h
> +++ b/include/ufs/ufshci.h
> @@ -57,6 +57,7 @@ enum {
>  	REG_UFS_CCAP				= 0x100,
>  	REG_UFS_CRYPTOCAP			= 0x104,
>  
> +	REG_UFS_MCQ_CFG				= 0x380,
>  	UFSHCI_CRYPTO_REG_SPACE_SIZE		= 0x400,
>  };
>  
> -- 
> 2.7.4
> 

-- 
மணிவண்ணன் சதாசிவம்

  parent reply	other threads:[~2022-11-28 15:15 UTC|newest]

Thread overview: 45+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-11-23  4:10 [PATCH v5 00/16] Add Multi Circular Queue Support Asutosh Das
2022-11-23  4:10 ` [PATCH v5 01/16] ufs: core: Optimize duplicate code to read extended feature Asutosh Das
2022-11-28 12:20   ` Manivannan Sadhasivam
2022-11-23  4:10 ` [PATCH v5 02/16] ufs: core: Probe for ext_iid support Asutosh Das
2022-11-28 12:53   ` Manivannan Sadhasivam
2022-11-23  4:10 ` [PATCH v5 03/16] ufs: core: Introduce Multi-circular queue capability Asutosh Das
2022-11-26  0:20   ` Bart Van Assche
2022-11-28 14:29   ` Manivannan Sadhasivam
2022-11-23  4:10 ` [PATCH v5 04/16] ufs: core: Defer adding host to scsi if mcq is supported Asutosh Das
2022-11-26  0:28   ` Bart Van Assche
2022-11-28 14:42   ` Manivannan Sadhasivam
2022-11-28 17:50     ` Asutosh Das
2022-11-23  4:10 ` [PATCH v5 05/16] ufs: core: mcq: Add Multi Circular Queue support Asutosh Das
2022-11-26  0:52   ` Bart Van Assche
2022-11-28 14:53   ` Manivannan Sadhasivam
2022-11-23  4:10 ` [PATCH v5 06/16] ufs: core: mcq: Configure resource regions Asutosh Das
2022-11-26  1:10   ` Bart Van Assche
2022-11-23  4:10 ` [PATCH v5 07/16] ufs: core: mcq: Calculate queue depth Asutosh Das
2022-11-26  1:14   ` Bart Van Assche
2022-11-28 15:15   ` Manivannan Sadhasivam [this message]
2022-11-28 19:54     ` Asutosh Das
2022-11-28 20:33       ` Bart Van Assche
2022-11-23  4:10 ` [PATCH v5 08/16] ufs: core: mcq: Allocate memory for mcq mode Asutosh Das
2022-11-26  1:20   ` Bart Van Assche
2022-11-28 15:48   ` Manivannan Sadhasivam
2022-11-23  4:10 ` [PATCH v5 09/16] ufs: core: mcq: Configure operation and runtime interface Asutosh Das
2022-11-26  1:28   ` Bart Van Assche
2022-11-28 22:08     ` Asutosh Das
2022-11-28 22:50       ` Bart Van Assche
2022-11-28 15:55   ` Manivannan Sadhasivam
2022-11-23  4:10 ` [PATCH v5 10/16] ufs: core: mcq: Use shared tags for MCQ mode Asutosh Das
2022-11-28 15:59   ` Manivannan Sadhasivam
2022-11-23  4:10 ` [PATCH v5 11/16] ufs: core: Prepare ufshcd_send_command for mcq Asutosh Das
2022-11-28 16:05   ` Manivannan Sadhasivam
2022-11-23  4:10 ` [PATCH v5 12/16] ufs: core: mcq: Find hardware queue to queue request Asutosh Das
2022-11-28 16:08   ` Manivannan Sadhasivam
2022-11-23  4:10 ` [PATCH v5 13/16] ufs: core: Prepare for completion in mcq Asutosh Das
2022-11-28 16:11   ` Manivannan Sadhasivam
2022-11-23  4:10 ` [PATCH v5 14/16] ufs: mcq: Add completion support of a cqe Asutosh Das
2022-11-28 17:00   ` Manivannan Sadhasivam
2022-11-28 17:47     ` Bart Van Assche
2022-11-23  4:10 ` [PATCH v5 15/16] ufs: core: mcq: Add completion support in poll Asutosh Das
2022-11-28 17:02   ` Manivannan Sadhasivam
2022-11-23  4:10 ` [PATCH v5 16/16] ufs: core: mcq: Enable Multi Circular Queue Asutosh Das
2022-11-28 17:03   ` Manivannan Sadhasivam

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20221128151512.GF62721@thinkpad \
    --to=mani@kernel.org \
    --cc=Arthur.Simchaev@wdc.com \
    --cc=agross@kernel.org \
    --cc=alim.akhtar@samsung.com \
    --cc=andersson@kernel.org \
    --cc=avri.altman@wdc.com \
    --cc=beanhuo@micron.com \
    --cc=bvanassche@acm.org \
    --cc=daejun7.park@samsung.com \
    --cc=eddie.huang@mediatek.com \
    --cc=j-young.choi@samsung.com \
    --cc=jejb@linux.ibm.com \
    --cc=konrad.dybcio@somainline.org \
    --cc=kwmad.kim@samsung.com \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=martin.petersen@oracle.com \
    --cc=quic_asutoshd@quicinc.com \
    --cc=quic_cang@quicinc.com \
    --cc=quic_nguyenb@quicinc.com \
    --cc=quic_xiaosenh@quicinc.com \
    --cc=stanley.chu@mediatek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).