From: Mike Christie <michael.christie@oracle.com>
To: bvanassche@acm.org, mwilck@suse.com, hch@lst.de,
martin.petersen@oracle.com, linux-scsi@vger.kernel.org,
james.bottomley@hansenpartnership.com
Cc: Mike Christie <michael.christie@oracle.com>
Subject: [PATCH v7 06/22] scsi: Have scsi-ml retry read_capacity_16 errors
Date: Mon, 23 Jan 2023 16:10:30 -0600 [thread overview]
Message-ID: <20230123221046.125483-7-michael.christie@oracle.com> (raw)
In-Reply-To: <20230123221046.125483-1-michael.christie@oracle.com>
This has read_capacity_16 have scsi-ml retry errors instead of driving
them itself.
There are 2 behavior changes with ths patch:
1. There is one behavior change where we no longer retry when
scsi_execute_cmd returns < 0, but we should be ok. We don't need to retry
for failures like the queue being removed, and for the case where there
are no tags/reqs the block layer waits/retries for us. For possible memory
allocation failures from blk_rq_map_kern we use GFP_NOIO, so retrying
will probably not help.
2. For the specific UAs we checked for and retried, we would get
READ_CAPACITY_RETRIES_ON_RESET retries plus whatever retries were left
from the loop's retries. Each UA now gets READ_CAPACITY_RETRIES_ON_RESET
reties, and the other errors (not including medium not present) get up
to 3 retries.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
---
drivers/scsi/sd.c | 105 ++++++++++++++++++++++++++++++----------------
1 file changed, 68 insertions(+), 37 deletions(-)
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 2aa3b0393b96..99fb4d72e0f7 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -2308,56 +2308,87 @@ static void read_capacity_error(struct scsi_disk *sdkp, struct scsi_device *sdp,
static int read_capacity_16(struct scsi_disk *sdkp, struct scsi_device *sdp,
unsigned char *buffer)
{
- unsigned char cmd[16];
+ static const u8 cmd[16] = { SERVICE_ACTION_IN_16, SAI_READ_CAPACITY_16,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, RC16_LEN };
struct scsi_sense_hdr sshdr;
- const struct scsi_exec_args exec_args = {
- .sshdr = &sshdr,
- };
int sense_valid = 0;
int the_result;
- int retries = 3, reset_retries = READ_CAPACITY_RETRIES_ON_RESET;
unsigned int alignment;
unsigned long long lba;
unsigned sector_size;
+ struct scsi_failure failures[] = {
+ /*
+ * Fail immediately for Invalid Command Operation Code or
+ * Invalid Field in CDB.
+ */
+ {
+ .sense = ILLEGAL_REQUEST,
+ .asc = 0x20,
+ .allowed = 0,
+ .result = SAM_STAT_CHECK_CONDITION,
+ },
+ {
+ .sense = ILLEGAL_REQUEST,
+ .asc = 0x24,
+ .allowed = 0,
+ .result = SAM_STAT_CHECK_CONDITION,
+ },
+ /* Fail immediately for Medium Not Present */
+ {
+ .sense = UNIT_ATTENTION,
+ .asc = 0x3A,
+ .allowed = 0,
+ .result = SAM_STAT_CHECK_CONDITION,
+ },
+ {
+ .sense = NOT_READY,
+ .asc = 0x3A,
+ .ascq = 0x0,
+ .allowed = 0,
+ .result = SAM_STAT_CHECK_CONDITION,
+ },
+ {
+ .sense = UNIT_ATTENTION,
+ .asc = 0x29,
+ /* Device reset might occur several times */
+ .allowed = READ_CAPACITY_RETRIES_ON_RESET,
+ .result = SAM_STAT_CHECK_CONDITION,
+ },
+ /* Any other error not listed above retry */
+ {
+ .result = SCMD_FAILURE_RESULT_ANY,
+ .allowed = 3,
+ },
+ {},
+ };
+ const struct scsi_exec_args exec_args = {
+ .sshdr = &sshdr,
+ .failures = failures,
+ };
if (sdp->no_read_capacity_16)
return -EINVAL;
- do {
- memset(cmd, 0, 16);
- cmd[0] = SERVICE_ACTION_IN_16;
- cmd[1] = SAI_READ_CAPACITY_16;
- cmd[13] = RC16_LEN;
- memset(buffer, 0, RC16_LEN);
-
- the_result = scsi_execute_cmd(sdp, cmd, REQ_OP_DRV_IN,
- buffer, RC16_LEN, SD_TIMEOUT,
- sdkp->max_retries, &exec_args);
+ memset(buffer, 0, RC16_LEN);
- if (media_not_present(sdkp, &sshdr))
- return -ENODEV;
+ the_result = scsi_execute_cmd(sdp, cmd, REQ_OP_DRV_IN, buffer,
+ RC16_LEN, SD_TIMEOUT, sdkp->max_retries,
+ &exec_args);
- if (the_result > 0) {
- sense_valid = scsi_sense_valid(&sshdr);
- if (sense_valid &&
- sshdr.sense_key == ILLEGAL_REQUEST &&
- (sshdr.asc == 0x20 || sshdr.asc == 0x24) &&
- sshdr.ascq == 0x00)
- /* Invalid Command Operation Code or
- * Invalid Field in CDB, just retry
- * silently with RC10 */
- return -EINVAL;
- if (sense_valid &&
- sshdr.sense_key == UNIT_ATTENTION &&
- sshdr.asc == 0x29 && sshdr.ascq == 0x00)
- /* Device reset might occur several times,
- * give it one more chance */
- if (--reset_retries > 0)
- continue;
- }
- retries--;
+ if (media_not_present(sdkp, &sshdr))
+ return -ENODEV;
- } while (the_result && retries);
+ if (the_result > 0) {
+ sense_valid = scsi_sense_valid(&sshdr);
+ if (sense_valid && sshdr.sense_key == ILLEGAL_REQUEST &&
+ (sshdr.asc == 0x20 || sshdr.asc == 0x24) &&
+ sshdr.ascq == 0x00)
+ /*
+ * Invalid Command Operation Code or Invalid Field in
+ * CDB, just retry silently with RC10
+ */
+ return -EINVAL;
+ }
if (the_result) {
sd_print_result(sdkp, "Read Capacity(16) failed", the_result);
--
2.25.1
next prev parent reply other threads:[~2023-01-23 22:12 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-23 22:10 [PATCH v7 01/22] scsi: Allow scsi_execute users to control retries Mike Christie
2023-01-23 22:10 ` [PATCH v7 01/22] scsi: Add helper to prep sense during error handling Mike Christie
2023-01-23 22:10 ` [PATCH v7 02/22] scsi: Allow passthrough to override what errors to retry Mike Christie
2023-01-23 22:10 ` [PATCH v7 03/22] scsi: Add scsi_failure field to scsi_exec_args Mike Christie
2023-01-23 22:10 ` [PATCH v7 04/22] scsi: Have scsi-ml retry scsi_probe_lun errors Mike Christie
2023-01-23 22:10 ` [PATCH v7 05/22] scsi: retry INQUIRY after timeout Mike Christie
2023-01-23 22:10 ` Mike Christie [this message]
2023-01-23 22:10 ` [PATCH v7 07/22] scsi: Use separate buf for START_STOP in sd_spinup_disk Mike Christie
2023-01-23 22:10 ` [PATCH v7 08/22] scsi: Have scsi-ml retry sd_spinup_disk errors Mike Christie
2023-01-23 22:10 ` [PATCH v7 09/22] scsi: hp_sw: Have scsi-ml retry scsi_exec_req errors Mike Christie
2023-01-23 22:10 ` [PATCH v7 10/22] scsi: rdac: Have scsi-ml retry send_mode_select errors Mike Christie
2023-01-23 22:10 ` [PATCH v7 11/22] scsi: spi: Have scsi-ml retry spi_execute errors Mike Christie
2023-01-23 22:10 ` [PATCH v7 12/22] scsi: sd: Have scsi-ml retry sd_sync_cache errors Mike Christie
2023-01-23 22:10 ` [PATCH v7 13/22] scsi: ch: Remove unit_attention Mike Christie
2023-01-23 22:10 ` [PATCH v7 14/22] scsi: ch: Have scsi-ml retry ch_do_scsi errors Mike Christie
2023-01-23 22:10 ` [PATCH v7 15/22] scsi: Have scsi-ml retry scsi_mode_sense UAs Mike Christie
2023-01-23 22:10 ` [PATCH v7 16/22] scsi: Have scsi-ml retry scsi_report_lun_scan errors Mike Christie
2023-01-23 22:10 ` [PATCH v7 17/22] scsi: sd: Have sd_pr_command retry UAs Mike Christie
2023-01-23 22:10 ` [PATCH v7 18/22] scsi: sd: Have scsi-ml retry read_capacity_10 errors Mike Christie
2023-01-23 22:10 ` [PATCH v7 19/22] scsi: ses: Have scsi-ml retry scsi_exec_req errors Mike Christie
2023-01-23 22:10 ` [PATCH v7 20/22] scsi: sr: Have scsi-ml retry get_sectorsize errors Mike Christie
2023-01-23 22:10 ` [PATCH v7 21/22] scsi: ufs: Have scsi-ml retry start stop errors Mike Christie
2023-01-23 22:10 ` [PATCH v7 22/22] scsi: Add kunit tests for scsi_check_passthrough Mike Christie
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230123221046.125483-7-michael.christie@oracle.com \
--to=michael.christie@oracle.com \
--cc=bvanassche@acm.org \
--cc=hch@lst.de \
--cc=james.bottomley@hansenpartnership.com \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
--cc=mwilck@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).