From: Niklas Cassel <niklas.cassel@wdc.com>
To: "James E.J. Bottomley" <jejb@linux.ibm.com>,
"Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>, Hannes Reinecke <hare@suse.de>,
Damien Le Moal <damien.lemoal@opensource.wdc.com>,
linux-scsi@vger.kernel.org, linux-ide@vger.kernel.org,
linux-block@vger.kernel.org,
Niklas Cassel <niklas.cassel@wdc.com>
Subject: [PATCH v4 09/19] scsi: allow enabling and disabling command duration limits
Date: Thu, 9 Mar 2023 22:55:01 +0100 [thread overview]
Message-ID: <20230309215516.3800571-10-niklas.cassel@wdc.com> (raw)
In-Reply-To: <20230309215516.3800571-1-niklas.cassel@wdc.com>
From: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Add the sysfs scsi device attribute cdl_enable to allow a user to turn
enable or disable a device command duration limits feature. CDL is
disabled by default. This feature must be explicitly enabled by a user by
setting the cdl_enable attribute to 1.
The new function scsi_cdl_enable() does not do anything beside setting
the cdl_enable field of struct scsi_device in the case of a (real) scsi
device (e.g. a SAS HDD). For ATA devices, the command duration limits
feature needs to be enabled/disabled using the ATA feature sub-page of
the control mode page. To do so, the scsi_cdl_enable() function checks
if this mode page is supported using scsi_mode_sense(). If it is,
scsi_mode_select() is used to enable and disable CDL.
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Co-developed-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
---
Documentation/ABI/testing/sysfs-block-device | 13 ++++
drivers/scsi/scsi.c | 62 ++++++++++++++++++++
drivers/scsi/scsi_sysfs.c | 31 ++++++++++
include/scsi/scsi_device.h | 2 +
4 files changed, 108 insertions(+)
diff --git a/Documentation/ABI/testing/sysfs-block-device b/Documentation/ABI/testing/sysfs-block-device
index ee3610a25845..626d48ac504b 100644
--- a/Documentation/ABI/testing/sysfs-block-device
+++ b/Documentation/ABI/testing/sysfs-block-device
@@ -104,3 +104,16 @@ Contact: linux-scsi@vger.kernel.org
Description:
(RO) Indicates if the device supports the command duration
limits feature found in some ATA and SCSI devices.
+
+
+What: /sys/block/*/device/cdl_enable
+Date: Mar, 2023
+KernelVersion: v6.4
+Contact: linux-scsi@vger.kernel.org
+Description:
+ (RW) For a device supporting the command duration limits
+ feature, write to the file to turn on or off the feature.
+ By default this feature is turned off.
+ Writing "1" to this file enables the use of command duration
+ limits for read and write commands in the kernel and turns on
+ the feature on the device. Writing "0" disables the feature.
diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c
index e233eb6cce11..385a09a387b2 100644
--- a/drivers/scsi/scsi.c
+++ b/drivers/scsi/scsi.c
@@ -641,6 +641,68 @@ void scsi_cdl_check(struct scsi_device *sdev)
kfree(buf);
}
+/**
+ * scsi_cdl_enable - Enable or disable a SCSI device supports for Command
+ * Duration Limits
+ * @sdev: The target device
+ * @enable: the target state
+ */
+int scsi_cdl_enable(struct scsi_device *sdev, bool enable)
+{
+ struct scsi_mode_data data;
+ struct scsi_sense_hdr sshdr;
+ struct scsi_vpd *vpd;
+ bool is_ata = false;
+ char buf[64];
+ int ret;
+
+ if (!sdev->cdl_supported)
+ return -EOPNOTSUPP;
+
+ rcu_read_lock();
+ vpd = rcu_dereference(sdev->vpd_pg89);
+ if (vpd)
+ is_ata = true;
+ rcu_read_unlock();
+
+ /*
+ * For ATA devices, CDL needs to be enabled with a SET FEATURES command.
+ */
+ if (is_ata) {
+ char *buf_data;
+ int len;
+
+ ret = scsi_mode_sense(sdev, 0x08, 0x0a, 0xf2, buf, sizeof(buf),
+ 5 * HZ, 3, &data, NULL);
+ if (ret)
+ return -EINVAL;
+
+ /* Enable CDL using the ATA feature page */
+ len = min_t(size_t, sizeof(buf),
+ data.length - data.header_length -
+ data.block_descriptor_length);
+ buf_data = buf + data.header_length +
+ data.block_descriptor_length;
+ if (enable)
+ buf_data[4] = 0x02;
+ else
+ buf_data[4] = 0;
+
+ ret = scsi_mode_select(sdev, 1, 0, buf_data, len, 5 * HZ, 3,
+ &data, &sshdr);
+ if (ret) {
+ if (scsi_sense_valid(&sshdr))
+ scsi_print_sense_hdr(sdev,
+ dev_name(&sdev->sdev_gendev), &sshdr);
+ return ret;
+ }
+ }
+
+ sdev->cdl_enable = enable;
+
+ return 0;
+}
+
/**
* scsi_device_get - get an additional reference to a scsi_device
* @sdev: device to get a reference to
diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c
index 4994148e685b..9a54b2c0fee7 100644
--- a/drivers/scsi/scsi_sysfs.c
+++ b/drivers/scsi/scsi_sysfs.c
@@ -1222,6 +1222,36 @@ static DEVICE_ATTR(queue_ramp_up_period, S_IRUGO | S_IWUSR,
sdev_show_queue_ramp_up_period,
sdev_store_queue_ramp_up_period);
+static ssize_t sdev_show_cdl_enable(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct scsi_device *sdev = to_scsi_device(dev);
+
+ return sysfs_emit(buf, "%d\n", (int)sdev->cdl_enable);
+}
+
+static ssize_t sdev_store_cdl_enable(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ int ret;
+ bool v;
+
+ if (!capable(CAP_SYS_ADMIN))
+ return -EACCES;
+
+ if (kstrtobool(buf, &v))
+ return -EINVAL;
+
+ ret = scsi_cdl_enable(to_scsi_device(dev), v);
+ if (ret)
+ return ret;
+
+ return count;
+}
+static DEVICE_ATTR(cdl_enable, S_IRUGO | S_IWUSR,
+ sdev_show_cdl_enable, sdev_store_cdl_enable);
+
static umode_t scsi_sdev_attr_is_visible(struct kobject *kobj,
struct attribute *attr, int i)
{
@@ -1302,6 +1332,7 @@ static struct attribute *scsi_sdev_attrs[] = {
#endif
&dev_attr_queue_ramp_up_period.attr,
&dev_attr_cdl_supported.attr,
+ &dev_attr_cdl_enable.attr,
REF_EVT(media_change),
REF_EVT(inquiry_change_reported),
REF_EVT(capacity_change_reported),
diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h
index 1cce42ad9f5c..970467d451bf 100644
--- a/include/scsi/scsi_device.h
+++ b/include/scsi/scsi_device.h
@@ -217,6 +217,7 @@ struct scsi_device {
unsigned silence_suspend:1; /* Do not print runtime PM related messages */
unsigned cdl_supported:1; /* Command duration limits supported */
+ unsigned cdl_enable:1; /* Enable/disable Command duration limits */
unsigned int queue_stopped; /* request queue is quiesced */
bool offline_already; /* Device offline message logged */
@@ -365,6 +366,7 @@ extern void scsi_remove_device(struct scsi_device *);
extern int scsi_unregister_device_handler(struct scsi_device_handler *scsi_dh);
void scsi_attach_vpd(struct scsi_device *sdev);
void scsi_cdl_check(struct scsi_device *sdev);
+int scsi_cdl_enable(struct scsi_device *sdev, bool enable);
extern struct scsi_device *scsi_device_from_queue(struct request_queue *q);
extern int __must_check scsi_device_get(struct scsi_device *);
--
2.39.2
next prev parent reply other threads:[~2023-03-09 21:56 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-09 21:54 [PATCH v4 00/19] Add Command Duration Limits support Niklas Cassel
2023-03-09 21:54 ` [PATCH v4 01/19] ioprio: cleanup interface definition Niklas Cassel
2023-03-16 17:58 ` Bart Van Assche
2023-03-16 18:09 ` Bart Van Assche
2023-03-09 21:54 ` [PATCH v4 02/19] block: introduce ioprio hints Niklas Cassel
2023-03-16 2:00 ` Damien Le Moal
2023-03-16 18:41 ` Bart Van Assche
2023-03-17 9:23 ` Niklas Cassel
2023-03-17 16:56 ` Bart Van Assche
2023-03-09 21:54 ` [PATCH v4 03/19] block: introduce BLK_STS_DURATION_LIMIT Niklas Cassel
2023-03-09 21:54 ` [PATCH v4 04/19] scsi: core: allow libata to complete successful commands via EH Niklas Cassel
2023-03-09 21:54 ` [PATCH v4 05/19] scsi: rename and move get_scsi_ml_byte() Niklas Cassel
2023-03-09 21:54 ` [PATCH v4 06/19] scsi: support retrieving sub-pages of mode pages Niklas Cassel
2023-03-09 21:54 ` [PATCH v4 07/19] scsi: support service action in scsi_report_opcode() Niklas Cassel
2023-03-09 21:55 ` [PATCH v4 08/19] scsi: detect support for command duration limits Niklas Cassel
2023-03-09 21:55 ` Niklas Cassel [this message]
2023-03-09 21:55 ` [PATCH v4 10/19] scsi: sd: set read/write commands CDL index Niklas Cassel
2023-03-09 21:55 ` [PATCH v4 11/19] scsi: sd: handle read/write CDL timeout failures Niklas Cassel
2023-03-09 21:55 ` [PATCH v4 12/19] ata: libata-scsi: remove unnecessary !cmd checks Niklas Cassel
2023-03-09 21:55 ` [PATCH v4 13/19] ata: libata: change ata_eh_request_sense() to not set CHECK_CONDITION Niklas Cassel
2023-03-09 21:55 ` [PATCH v4 14/19] ata: libata: detect support for command duration limits Niklas Cassel
2023-03-09 21:55 ` [PATCH v4 15/19] ata: libata-scsi: handle CDL bits in ata_scsiop_maint_in() Niklas Cassel
2023-03-09 21:55 ` [PATCH v4 16/19] ata: libata-scsi: add support for CDL pages mode sense Niklas Cassel
2023-03-09 21:55 ` [PATCH v4 17/19] ata: libata: add ATA feature control sub-page translation Niklas Cassel
2023-03-09 21:55 ` [PATCH v4 18/19] ata: libata: set read/write commands CDL index Niklas Cassel
2023-03-09 21:55 ` [PATCH v4 19/19] ata: libata: handle completion of CDL commands using policy 0xD Niklas Cassel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230309215516.3800571-10-niklas.cassel@wdc.com \
--to=niklas.cassel@wdc.com \
--cc=damien.lemoal@opensource.wdc.com \
--cc=hare@suse.de \
--cc=hch@lst.de \
--cc=jejb@linux.ibm.com \
--cc=linux-block@vger.kernel.org \
--cc=linux-ide@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).