[PATCH] scsi: libcxgbi: use kvzalloc instead of opencoded kzalloc/vzalloc

[PATCH] scsi: libcxgbi: use kvzalloc instead of opencoded kzalloc/vzalloc

[Denis Efremov]

Remove cxgbi_alloc_big_mem(), cxgbi_free_big_mem() functions
and use kvzalloc/kvfree instead.

Signed-off-by: Denis Efremov <efremov@linux.com>
---
 drivers/scsi/cxgbi/libcxgbi.c |  8 ++++----
 drivers/scsi/cxgbi/libcxgbi.h | 16 ----------------
 2 files changed, 4 insertions(+), 20 deletions(-)

diff --git a/drivers/scsi/cxgbi/libcxgbi.c b/drivers/scsi/cxgbi/libcxgbi.c
index 4bc794d2f51c..a98b870eb1f3 100644
--- a/drivers/scsi/cxgbi/libcxgbi.c
+++ b/drivers/scsi/cxgbi/libcxgbi.c
@@ -77,9 +77,9 @@ int cxgbi_device_portmap_create(struct cxgbi_device *cdev, unsigned int base,
 {
 	struct cxgbi_ports_map *pmap = &cdev->pmap;
 
-	pmap->port_csk = cxgbi_alloc_big_mem(max_conn *
-					     sizeof(struct cxgbi_sock *),
-					     GFP_KERNEL);
+	pmap->port_csk = kvzalloc(array_size(max_conn,
+					     sizeof(struct cxgbi_sock *)),
+				  GFP_KERNEL);
 	if (!pmap->port_csk) {
 		pr_warn("cdev 0x%p, portmap OOM %u.\n", cdev, max_conn);
 		return -ENOMEM;
@@ -124,7 +124,7 @@ static inline void cxgbi_device_destroy(struct cxgbi_device *cdev)
 	if (cdev->cdev2ppm)
 		cxgbi_ppm_release(cdev->cdev2ppm(cdev));
 	if (cdev->pmap.max_connect)
-		cxgbi_free_big_mem(cdev->pmap.port_csk);
+		kvfree(cdev->pmap.port_csk);
 	kfree(cdev);
 }
 
diff --git a/drivers/scsi/cxgbi/libcxgbi.h b/drivers/scsi/cxgbi/libcxgbi.h
index 84b96af52655..321426242be4 100644
--- a/drivers/scsi/cxgbi/libcxgbi.h
+++ b/drivers/scsi/cxgbi/libcxgbi.h
@@ -537,22 +537,6 @@ struct cxgbi_task_data {
 #define iscsi_task_cxgbi_data(task) \
 	((task)->dd_data + sizeof(struct iscsi_tcp_task))
 
-static inline void *cxgbi_alloc_big_mem(unsigned int size,
-					gfp_t gfp)
-{
-	void *p = kzalloc(size, gfp | __GFP_NOWARN);
-
-	if (!p)
-		p = vzalloc(size);
-
-	return p;
-}
-
-static inline void cxgbi_free_big_mem(void *addr)
-{
-	kvfree(addr);
-}
-
 static inline void cxgbi_set_iscsi_ipv4(struct cxgbi_hba *chba, __be32 ipaddr)
 {
 	if (chba->cdev->flags & CXGBI_FLAG_IPV4_SET)
-- 
2.26.2

Re: [PATCH] scsi: libcxgbi: use kvzalloc instead of opencoded kzalloc/vzalloc

[Joe Perches]

On Sat, 2020-08-01 at 00:55 +0300, Denis Efremov wrote:
> Remove cxgbi_alloc_big_mem(), cxgbi_free_big_mem() functions
> and use kvzalloc/kvfree instead.

Sensible, thanks.

> diff --git a/drivers/scsi/cxgbi/libcxgbi.c b/drivers/scsi/cxgbi/libcxgbi.c
[]
> @@ -77,9 +77,9 @@ int cxgbi_device_portmap_create(struct cxgbi_device *cdev, unsigned int base,
>  {
>  	struct cxgbi_ports_map *pmap = &cdev->pmap;
>  
> -	pmap->port_csk = cxgbi_alloc_big_mem(max_conn *
> -					     sizeof(struct cxgbi_sock *),
> -					     GFP_KERNEL);
> +	pmap->port_csk = kvzalloc(array_size(max_conn,
> +					     sizeof(struct cxgbi_sock *)),
> +				  GFP_KERNEL);

missing __GFP_NOWARN

> diff --git a/drivers/scsi/cxgbi/libcxgbi.h b/drivers/scsi/cxgbi/libcxgbi.h
[]
> @@ -537,22 +537,6 @@ struct cxgbi_task_data {
>  #define iscsi_task_cxgbi_data(task) \
>  	((task)->dd_data + sizeof(struct iscsi_tcp_task))
>  
> -static inline void *cxgbi_alloc_big_mem(unsigned int size,
> -					gfp_t gfp)
> -{
> -	void *p = kzalloc(size, gfp | __GFP_NOWARN);

Re: [PATCH] scsi: libcxgbi: use kvzalloc instead of opencoded kzalloc/vzalloc

[Denis Efremov]

On 8/1/20 12:58 AM, Joe Perches wrote:
> On Sat, 2020-08-01 at 00:55 +0300, Denis Efremov wrote:
>> Remove cxgbi_alloc_big_mem(), cxgbi_free_big_mem() functions
>> and use kvzalloc/kvfree instead.
> 
> Sensible, thanks.
> 
>> diff --git a/drivers/scsi/cxgbi/libcxgbi.c b/drivers/scsi/cxgbi/libcxgbi.c
> []
>> @@ -77,9 +77,9 @@ int cxgbi_device_portmap_create(struct cxgbi_device *cdev, unsigned int base,
>>  {
>>  	struct cxgbi_ports_map *pmap = &cdev->pmap;
>>  
>> -	pmap->port_csk = cxgbi_alloc_big_mem(max_conn *
>> -					     sizeof(struct cxgbi_sock *),
>> -					     GFP_KERNEL);
>> +	pmap->port_csk = kvzalloc(array_size(max_conn,
>> +					     sizeof(struct cxgbi_sock *)),
>> +				  GFP_KERNEL);
> 
> missing __GFP_NOWARN
> 

kvmalloc_node adds __GFP_NOWARN internally to kmalloc call
https://elixir.bootlin.com/linux/v5.8-rc4/source/mm/util.c#L568

Thanks,
Denis

Re: [PATCH] scsi: libcxgbi: use kvzalloc instead of opencoded kzalloc/vzalloc

[Joe Perches]

On Sat, 2020-08-01 at 01:10 +0300, Denis Efremov wrote:
> 
> On 8/1/20 12:58 AM, Joe Perches wrote:
> > On Sat, 2020-08-01 at 00:55 +0300, Denis Efremov wrote:
> > > Remove cxgbi_alloc_big_mem(), cxgbi_free_big_mem() functions
> > > and use kvzalloc/kvfree instead.
> > 
> > Sensible, thanks.
> > 
> > > diff --git a/drivers/scsi/cxgbi/libcxgbi.c b/drivers/scsi/cxgbi/libcxgbi.c
> > []
> > > @@ -77,9 +77,9 @@ int cxgbi_device_portmap_create(struct cxgbi_device *cdev, unsigned int base,
> > >  {
> > >  	struct cxgbi_ports_map *pmap = &cdev->pmap;
> > >  
> > > -	pmap->port_csk = cxgbi_alloc_big_mem(max_conn *
> > > -					     sizeof(struct cxgbi_sock *),
> > > -					     GFP_KERNEL);
> > > +	pmap->port_csk = kvzalloc(array_size(max_conn,
> > > +					     sizeof(struct cxgbi_sock *)),
> > > +				  GFP_KERNEL);
> > 
> > missing __GFP_NOWARN
> > 
> 
> kvmalloc_node adds __GFP_NOWARN internally to kmalloc call
> https://elixir.bootlin.com/linux/v5.8-rc4/source/mm/util.c#L568

Only when there's a fallback, and the fallback does not.

Re: [PATCH] scsi: libcxgbi: use kvzalloc instead of opencoded kzalloc/vzalloc

[Denis Efremov]

On 8/1/20 1:24 AM, Joe Perches wrote:
> On Sat, 2020-08-01 at 01:10 +0300, Denis Efremov wrote:
>>
>> On 8/1/20 12:58 AM, Joe Perches wrote:
>>> On Sat, 2020-08-01 at 00:55 +0300, Denis Efremov wrote:
>>>> Remove cxgbi_alloc_big_mem(), cxgbi_free_big_mem() functions
>>>> and use kvzalloc/kvfree instead.
>>>
>>> Sensible, thanks.
>>>
>>>> diff --git a/drivers/scsi/cxgbi/libcxgbi.c b/drivers/scsi/cxgbi/libcxgbi.c
>>> []
>>>> @@ -77,9 +77,9 @@ int cxgbi_device_portmap_create(struct cxgbi_device *cdev, unsigned int base,
>>>>  {
>>>>  	struct cxgbi_ports_map *pmap = &cdev->pmap;
>>>>  
>>>> -	pmap->port_csk = cxgbi_alloc_big_mem(max_conn *
>>>> -					     sizeof(struct cxgbi_sock *),
>>>> -					     GFP_KERNEL);
>>>> +	pmap->port_csk = kvzalloc(array_size(max_conn,
>>>> +					     sizeof(struct cxgbi_sock *)),
>>>> +				  GFP_KERNEL);
>>>
>>> missing __GFP_NOWARN
>>>
>>
>> kvmalloc_node adds __GFP_NOWARN internally to kmalloc call
>> https://elixir.bootlin.com/linux/v5.8-rc4/source/mm/util.c#L568
> 
> Only when there's a fallback, and the fallback does not.
> 

Sorry, Joe, I don't understand why do we need to add __GFP_NOWARN here.

We use GFP_KERNEL for allocation. cxgbi_alloc_big_mem adds __GFP_NOWARN only to kzalloc().
kvzalloc is: kvmalloc(size, flags | __GFP_ZERO)
kvmalloc is: kvmalloc_node(size, flags, NUMA_NO_NODE)
kvmalloc_node: 
	if ((flags & GFP_KERNEL) != GFP_KERNEL)           // false, flags == GFP_KERNEL|__GFP_ZERO
		return kmalloc_node(size, flags, node);

	if (size > PAGE_SIZE) {
		kmalloc_flags |= __GFP_NOWARN;            // add __GFP_NOWARN for "big" allocations

		if (!(kmalloc_flags & __GFP_RETRY_MAYFAIL))
			kmalloc_flags |= __GFP_NORETRY;
	}

	// kmalloc_flags == GFP_KERNEL|__GFP_ZERO|__GFP_NOWARN if size > PAGE_SIZE
	ret = kmalloc_node(size, kmalloc_flags, node);    

	if (ret || size <= PAGE_SIZE)
		return ret;

	// flags == GFP_KERNEL|__GFP_ZERO
	return __vmalloc_node(size, 1, flags, node,
			__builtin_return_address(0));

So, to my understanding the difference is only that cxgbi_alloc_big_mem adds __GFP_NOWARN
to kzalloc unconditionally, kvzalloc adds __GFP_NOWARN to kmalloc_node if size > PAGE_SIZE.
We use: max_conn * sizeof(struct cxgbi_sock *) in allocation. max_conn can be either
CXGBI_MAX_CONN or CXGB4I_MAX_CONN. CXGBI_MAX_CONN == 16384, CXGB4I_MAX_CONN == 16384.
Thus the allocation is bigger than PAGE_SIZE and kvmalloc_node adds __GFP_NOWARN to the
kmalloc_node call. Maybe I missed something?

Thanks,
Denis

Re: [PATCH] scsi: libcxgbi: use kvzalloc instead of opencoded kzalloc/vzalloc

[Denis Efremov]

On 8/1/20 10:51 AM, Denis Efremov wrote:
> 
> 
> On 8/1/20 1:24 AM, Joe Perches wrote:
>> On Sat, 2020-08-01 at 01:10 +0300, Denis Efremov wrote:
>>>
>>> On 8/1/20 12:58 AM, Joe Perches wrote:
>>>> On Sat, 2020-08-01 at 00:55 +0300, Denis Efremov wrote:
>>>>> Remove cxgbi_alloc_big_mem(), cxgbi_free_big_mem() functions
>>>>> and use kvzalloc/kvfree instead.
>>>>
>>>> Sensible, thanks.
>>>>
>>>>> diff --git a/drivers/scsi/cxgbi/libcxgbi.c b/drivers/scsi/cxgbi/libcxgbi.c
>>>> []
>>>>> @@ -77,9 +77,9 @@ int cxgbi_device_portmap_create(struct cxgbi_device *cdev, unsigned int base,
>>>>>  {
>>>>>  	struct cxgbi_ports_map *pmap = &cdev->pmap;
>>>>>  
>>>>> -	pmap->port_csk = cxgbi_alloc_big_mem(max_conn *
>>>>> -					     sizeof(struct cxgbi_sock *),
>>>>> -					     GFP_KERNEL);
>>>>> +	pmap->port_csk = kvzalloc(array_size(max_conn,
>>>>> +					     sizeof(struct cxgbi_sock *)),
>>>>> +				  GFP_KERNEL);
>>>>
>>>> missing __GFP_NOWARN
>>>>
>>>
>>> kvmalloc_node adds __GFP_NOWARN internally to kmalloc call
>>> https://elixir.bootlin.com/linux/v5.8-rc4/source/mm/util.c#L568
>>
>> Only when there's a fallback, and the fallback does not.
>>
> 
> Sorry, Joe, I don't understand why do we need to add __GFP_NOWARN here.
> 
> We use GFP_KERNEL for allocation. cxgbi_alloc_big_mem adds __GFP_NOWARN only to kzalloc().
> kvzalloc is: kvmalloc(size, flags | __GFP_ZERO)
> kvmalloc is: kvmalloc_node(size, flags, NUMA_NO_NODE)
> kvmalloc_node: 
> 	if ((flags & GFP_KERNEL) != GFP_KERNEL)           // false, flags == GFP_KERNEL|__GFP_ZERO
> 		return kmalloc_node(size, flags, node);
> 
> 	if (size > PAGE_SIZE) {
> 		kmalloc_flags |= __GFP_NOWARN;            // add __GFP_NOWARN for "big" allocations
> 
> 		if (!(kmalloc_flags & __GFP_RETRY_MAYFAIL))
> 			kmalloc_flags |= __GFP_NORETRY;
> 	}
> 
> 	// kmalloc_flags == GFP_KERNEL|__GFP_ZERO|__GFP_NOWARN if size > PAGE_SIZE
> 	ret = kmalloc_node(size, kmalloc_flags, node);    
> 
> 	if (ret || size <= PAGE_SIZE)
> 		return ret;
> 
> 	// flags == GFP_KERNEL|__GFP_ZERO
> 	return __vmalloc_node(size, 1, flags, node,
> 			__builtin_return_address(0));
> 
> So, to my understanding the difference is only that cxgbi_alloc_big_mem adds __GFP_NOWARN
> to kzalloc unconditionally, kvzalloc adds __GFP_NOWARN to kmalloc_node if size > PAGE_SIZE.
> We use: max_conn * sizeof(struct cxgbi_sock *) in allocation. max_conn can be either
> CXGBI_MAX_CONN or CXGB4I_MAX_CONN. CXGBI_MAX_CONN == 16384, CXGB4I_MAX_CONN == 16384.
> Thus the allocation is bigger than PAGE_SIZE and kvmalloc_node adds __GFP_NOWARN to the
> kmalloc_node call. Maybe I missed something?
> 

Of course max_conn can be smaller than CXGBI_MAX_CONN and CXGB4I_MAX_CONN and size < PAGE_SIZE.
However, it's by design not to warn on "small" allocations in kvmalloc_node and it will not even
try to call __vmalloc_node if "small" allocation will fail with kmalloc_node. I think that this
behavior fits the cxgbi_device_portmap_create() context call.

Re: [PATCH] scsi: libcxgbi: use kvzalloc instead of opencoded kzalloc/vzalloc

[Joe Perches]

On Sat, 2020-08-01 at 10:51 +0300, Denis Efremov wrote:
> On 8/1/20 1:24 AM, Joe Perches wrote:
> > On Sat, 2020-08-01 at 01:10 +0300, Denis Efremov wrote:
> > > On 8/1/20 12:58 AM, Joe Perches wrote:
> > > > On Sat, 2020-08-01 at 00:55 +0300, Denis Efremov wrote:
> > > > > Remove cxgbi_alloc_big_mem(), cxgbi_free_big_mem() functions
> > > > > and use kvzalloc/kvfree instead.
> > > > 
> > > > Sensible, thanks.
> > > > 
> > > > > diff --git a/drivers/scsi/cxgbi/libcxgbi.c b/drivers/scsi/cxgbi/libcxgbi.c
> > > > []
> > > > > @@ -77,9 +77,9 @@ int cxgbi_device_portmap_create(struct cxgbi_device *cdev, unsigned int base,
> > > > >  {
> > > > >  	struct cxgbi_ports_map *pmap = &cdev->pmap;
> > > > >  
> > > > > -	pmap->port_csk = cxgbi_alloc_big_mem(max_conn *
> > > > > -					     sizeof(struct cxgbi_sock *),
> > > > > -					     GFP_KERNEL);
> > > > > +	pmap->port_csk = kvzalloc(array_size(max_conn,
> > > > > +					     sizeof(struct cxgbi_sock *)),
> > > > > +				  GFP_KERNEL);
> > > > 
> > > > missing __GFP_NOWARN
> > > > 
> > > 
> > > kvmalloc_node adds __GFP_NOWARN internally to kmalloc call
> > > https://elixir.bootlin.com/linux/v5.8-rc4/source/mm/util.c#L568
> > 
> > Only when there's a fallback, and the fallback does not.
> Sorry, Joe, I don't understand why do we need to add __GFP_NOWARN here.

Hi.

The reason to add __GFP_NOWARN is so you don't get a
dump_stack() as there's an existing error message
output below this when OOM.

You should either remove the error message as it just
effectively duplicates the dump_stack or add __GFP_NOWARN.

Your choice.

cheers, Joe

Re: [PATCH] scsi: libcxgbi: use kvzalloc instead of opencoded kzalloc/vzalloc

[Denis Efremov]

On 8/1/20 11:10 AM, Joe Perches wrote:
> On Sat, 2020-08-01 at 10:51 +0300, Denis Efremov wrote:
>> On 8/1/20 1:24 AM, Joe Perches wrote:
>>> On Sat, 2020-08-01 at 01:10 +0300, Denis Efremov wrote:
>>>> On 8/1/20 12:58 AM, Joe Perches wrote:
>>>>> On Sat, 2020-08-01 at 00:55 +0300, Denis Efremov wrote:
>>>>>> Remove cxgbi_alloc_big_mem(), cxgbi_free_big_mem() functions
>>>>>> and use kvzalloc/kvfree instead.
>>>>>
>>>>> Sensible, thanks.
>>>>>
>>>>>> diff --git a/drivers/scsi/cxgbi/libcxgbi.c b/drivers/scsi/cxgbi/libcxgbi.c
>>>>> []
>>>>>> @@ -77,9 +77,9 @@ int cxgbi_device_portmap_create(struct cxgbi_device *cdev, unsigned int base,
>>>>>>  {
>>>>>>  	struct cxgbi_ports_map *pmap = &cdev->pmap;
>>>>>>  
>>>>>> -	pmap->port_csk = cxgbi_alloc_big_mem(max_conn *
>>>>>> -					     sizeof(struct cxgbi_sock *),
>>>>>> -					     GFP_KERNEL);
>>>>>> +	pmap->port_csk = kvzalloc(array_size(max_conn,
>>>>>> +					     sizeof(struct cxgbi_sock *)),
>>>>>> +				  GFP_KERNEL);
>>>>>
>>>>> missing __GFP_NOWARN
>>>>>
>>>>
>>>> kvmalloc_node adds __GFP_NOWARN internally to kmalloc call
>>>> https://elixir.bootlin.com/linux/v5.8-rc4/source/mm/util.c#L568
>>>
>>> Only when there's a fallback, and the fallback does not.
>> Sorry, Joe, I don't understand why do we need to add __GFP_NOWARN here.
> 
> Hi.
> 
> The reason to add __GFP_NOWARN is so you don't get a
> dump_stack() as there's an existing error message
> output below this when OOM.
> 
> You should either remove the error message as it just
> effectively duplicates the dump_stack or add __GFP_NOWARN.

Now I see, thanks! I will send v2.

Regards,
Denis

[PATCH v2] scsi: libcxgbi: use kvzalloc instead of opencoded kzalloc/vzalloc

[Denis Efremov]

Remove cxgbi_alloc_big_mem(), cxgbi_free_big_mem() functions
and use kvzalloc/kvfree instead. __GFP_NOWARN added to kvzalloc()
call because we already print a warning in case of allocation fail.

Signed-off-by: Denis Efremov <efremov@linux.com>
---
 drivers/scsi/cxgbi/libcxgbi.c |  8 ++++----
 drivers/scsi/cxgbi/libcxgbi.h | 16 ----------------
 2 files changed, 4 insertions(+), 20 deletions(-)

diff --git a/drivers/scsi/cxgbi/libcxgbi.c b/drivers/scsi/cxgbi/libcxgbi.c
index 4bc794d2f51c..51f4d34da73f 100644
--- a/drivers/scsi/cxgbi/libcxgbi.c
+++ b/drivers/scsi/cxgbi/libcxgbi.c
@@ -77,9 +77,9 @@ int cxgbi_device_portmap_create(struct cxgbi_device *cdev, unsigned int base,
 {
 	struct cxgbi_ports_map *pmap = &cdev->pmap;
 
-	pmap->port_csk = cxgbi_alloc_big_mem(max_conn *
-					     sizeof(struct cxgbi_sock *),
-					     GFP_KERNEL);
+	pmap->port_csk = kvzalloc(array_size(max_conn,
+					     sizeof(struct cxgbi_sock *)),
+				  GFP_KERNEL | __GFP_NOWARN);
 	if (!pmap->port_csk) {
 		pr_warn("cdev 0x%p, portmap OOM %u.\n", cdev, max_conn);
 		return -ENOMEM;
@@ -124,7 +124,7 @@ static inline void cxgbi_device_destroy(struct cxgbi_device *cdev)
 	if (cdev->cdev2ppm)
 		cxgbi_ppm_release(cdev->cdev2ppm(cdev));
 	if (cdev->pmap.max_connect)
-		cxgbi_free_big_mem(cdev->pmap.port_csk);
+		kvfree(cdev->pmap.port_csk);
 	kfree(cdev);
 }
 
diff --git a/drivers/scsi/cxgbi/libcxgbi.h b/drivers/scsi/cxgbi/libcxgbi.h
index 84b96af52655..321426242be4 100644
--- a/drivers/scsi/cxgbi/libcxgbi.h
+++ b/drivers/scsi/cxgbi/libcxgbi.h
@@ -537,22 +537,6 @@ struct cxgbi_task_data {
 #define iscsi_task_cxgbi_data(task) \
 	((task)->dd_data + sizeof(struct iscsi_tcp_task))
 
-static inline void *cxgbi_alloc_big_mem(unsigned int size,
-					gfp_t gfp)
-{
-	void *p = kzalloc(size, gfp | __GFP_NOWARN);
-
-	if (!p)
-		p = vzalloc(size);
-
-	return p;
-}
-
-static inline void cxgbi_free_big_mem(void *addr)
-{
-	kvfree(addr);
-}
-
 static inline void cxgbi_set_iscsi_ipv4(struct cxgbi_hba *chba, __be32 ipaddr)
 {
 	if (chba->cdev->flags & CXGBI_FLAG_IPV4_SET)
-- 
2.26.2

Re: [PATCH v2] scsi: libcxgbi: use kvzalloc instead of opencoded kzalloc/vzalloc

[Denis Efremov]

Ping?

On 8/1/20 4:31 PM, Denis Efremov wrote:
> Remove cxgbi_alloc_big_mem(), cxgbi_free_big_mem() functions
> and use kvzalloc/kvfree instead. __GFP_NOWARN added to kvzalloc()
> call because we already print a warning in case of allocation fail.
> 
> Signed-off-by: Denis Efremov <efremov@linux.com>
> ---
>  drivers/scsi/cxgbi/libcxgbi.c |  8 ++++----
>  drivers/scsi/cxgbi/libcxgbi.h | 16 ----------------
>  2 files changed, 4 insertions(+), 20 deletions(-)
> 
> diff --git a/drivers/scsi/cxgbi/libcxgbi.c b/drivers/scsi/cxgbi/libcxgbi.c
> index 4bc794d2f51c..51f4d34da73f 100644
> --- a/drivers/scsi/cxgbi/libcxgbi.c
> +++ b/drivers/scsi/cxgbi/libcxgbi.c
> @@ -77,9 +77,9 @@ int cxgbi_device_portmap_create(struct cxgbi_device *cdev, unsigned int base,
>  {
>  	struct cxgbi_ports_map *pmap = &cdev->pmap;
>  
> -	pmap->port_csk = cxgbi_alloc_big_mem(max_conn *
> -					     sizeof(struct cxgbi_sock *),
> -					     GFP_KERNEL);
> +	pmap->port_csk = kvzalloc(array_size(max_conn,
> +					     sizeof(struct cxgbi_sock *)),
> +				  GFP_KERNEL | __GFP_NOWARN);
>  	if (!pmap->port_csk) {
>  		pr_warn("cdev 0x%p, portmap OOM %u.\n", cdev, max_conn);
>  		return -ENOMEM;
> @@ -124,7 +124,7 @@ static inline void cxgbi_device_destroy(struct cxgbi_device *cdev)
>  	if (cdev->cdev2ppm)
>  		cxgbi_ppm_release(cdev->cdev2ppm(cdev));
>  	if (cdev->pmap.max_connect)
> -		cxgbi_free_big_mem(cdev->pmap.port_csk);
> +		kvfree(cdev->pmap.port_csk);
>  	kfree(cdev);
>  }
>  
> diff --git a/drivers/scsi/cxgbi/libcxgbi.h b/drivers/scsi/cxgbi/libcxgbi.h
> index 84b96af52655..321426242be4 100644
> --- a/drivers/scsi/cxgbi/libcxgbi.h
> +++ b/drivers/scsi/cxgbi/libcxgbi.h
> @@ -537,22 +537,6 @@ struct cxgbi_task_data {
>  #define iscsi_task_cxgbi_data(task) \
>  	((task)->dd_data + sizeof(struct iscsi_tcp_task))
>  
> -static inline void *cxgbi_alloc_big_mem(unsigned int size,
> -					gfp_t gfp)
> -{
> -	void *p = kzalloc(size, gfp | __GFP_NOWARN);
> -
> -	if (!p)
> -		p = vzalloc(size);
> -
> -	return p;
> -}
> -
> -static inline void cxgbi_free_big_mem(void *addr)
> -{
> -	kvfree(addr);
> -}
> -
>  static inline void cxgbi_set_iscsi_ipv4(struct cxgbi_hba *chba, __be32 ipaddr)
>  {
>  	if (chba->cdev->flags & CXGBI_FLAG_IPV4_SET)
> 

Re: [PATCH v2] scsi: libcxgbi: use kvzalloc instead of opencoded kzalloc/vzalloc

[Martin K. Petersen]

Denis,

> Ping?

It's in my staging branch.

-- 
Martin K. Petersen	Oracle Linux Engineering

Re: [PATCH v2] scsi: libcxgbi: use kvzalloc instead of opencoded kzalloc/vzalloc

[Martin K. Petersen]

On Sat, 1 Aug 2020 16:31:23 +0300, Denis Efremov wrote:

> Remove cxgbi_alloc_big_mem(), cxgbi_free_big_mem() functions
> and use kvzalloc/kvfree instead. __GFP_NOWARN added to kvzalloc()
> call because we already print a warning in case of allocation fail.

Applied to 5.10/scsi-queue, thanks!

[1/1] scsi: libcxgbi: Use kvzalloc instead of opencoded kzalloc/vzalloc
      https://git.kernel.org/mkp/scsi/c/ee9108fedf63

-- 
Martin K. Petersen	Oracle Linux Engineering