From: Johannes Thumshirn <Johannes.Thumshirn@wdc.com>
To: Damien Le Moal <Damien.LeMoal@wdc.com>, Jens Axboe <axboe@kernel.dk>
Cc: "linux-block@vger.kernel.org" <linux-block@vger.kernel.org>,
"Martin K . Petersen" <martin.petersen@oracle.com>,
"linux-scsi@vger.kernel.org" <linux-scsi@vger.kernel.org>
Subject: Re: [PATCH] block: don't do revalidate zones on invalid devices
Date: Fri, 31 Jul 2020 07:43:49 +0000 [thread overview]
Message-ID: <SN4PR0401MB3598C060632877CA0C46918A9B4E0@SN4PR0401MB3598.namprd04.prod.outlook.com> (raw)
In-Reply-To: CY4PR04MB3751A56EDE1C372CB7531EE0E7710@CY4PR04MB3751.namprd04.prod.outlook.com
On 30/07/2020 14:33, Damien Le Moal wrote:
> On 2020/07/30 20:25, Johannes Thumshirn wrote:
>> When we loose a device for whatever reason while (re)scanning zones, we
>> trip over a NULL pointer in blk_revalidate_zone_cb, like in the following
>> log:
>>
>> sd 0:0:0:0: [sda] 3418095616 4096-byte logical blocks: (14.0 TB/12.7 TiB)
>> sd 0:0:0:0: [sda] 52156 zones of 65536 logical blocks
>> sd 0:0:0:0: [sda] Write Protect is off
>> sd 0:0:0:0: [sda] Mode Sense: 37 00 00 08
>> sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>> sd 0:0:0:0: [sda] REPORT ZONES start lba 1065287680 failed
>> sd 0:0:0:0: [sda] REPORT ZONES: Result: hostbyte=0x00 driverbyte=0x08
>> sd 0:0:0:0: [sda] Sense Key : 0xb [current]
>> sd 0:0:0:0: [sda] ASC=0x0 ASCQ=0x6
>> sda: failed to revalidate zones
>> sd 0:0:0:0: [sda] 0 4096-byte logical blocks: (0 B/0 B)
>> sda: detected capacity change from 14000519643136 to 0
>> ==================================================================
>> BUG: KASAN: null-ptr-deref in blk_revalidate_zone_cb+0x1b7/0x550
>> Write of size 8 at addr 0000000000000010 by task kworker/u4:1/58
>>
>> CPU: 1 PID: 58 Comm: kworker/u4:1 Not tainted 5.8.0-rc1 #692
>> Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4-rebuilt.opensuse.org 04/01/2014
>> Workqueue: events_unbound async_run_entry_fn
>> Call Trace:
>> dump_stack+0x7d/0xb0
>> ? blk_revalidate_zone_cb+0x1b7/0x550
>> kasan_report.cold+0x5/0x37
>> ? blk_revalidate_zone_cb+0x1b7/0x550
>> check_memory_region+0x145/0x1a0
>> blk_revalidate_zone_cb+0x1b7/0x550
>> sd_zbc_parse_report+0x1f1/0x370
>> ? blk_req_zone_write_trylock+0x200/0x200
>> ? sectors_to_logical+0x60/0x60
>> ? blk_req_zone_write_trylock+0x200/0x200
>> ? blk_req_zone_write_trylock+0x200/0x200
>> sd_zbc_report_zones+0x3c4/0x5e0
>> ? sd_dif_config_host+0x500/0x500
>> blk_revalidate_disk_zones+0x231/0x44d
>> ? _raw_write_lock_irqsave+0xb0/0xb0
>> ? blk_queue_free_zone_bitmaps+0xd0/0xd0
>> sd_zbc_read_zones+0x8cf/0x11a0
>> sd_revalidate_disk+0x305c/0x64e0
>> ? __device_add_disk+0x776/0xf20
>> ? read_capacity_16.part.0+0x1080/0x1080
>> ? blk_alloc_devt+0x250/0x250
>> ? create_object.isra.0+0x595/0xa20
>> ? kasan_unpoison_shadow+0x33/0x40
>> sd_probe+0x8dc/0xcd2
>> really_probe+0x20e/0xaf0
>> __driver_attach_async_helper+0x249/0x2d0
>> async_run_entry_fn+0xbe/0x560
>> process_one_work+0x764/0x1290
>> ? _raw_read_unlock_irqrestore+0x30/0x30
>> worker_thread+0x598/0x12f0
>> ? __kthread_parkme+0xc6/0x1b0
>> ? schedule+0xed/0x2c0
>> ? process_one_work+0x1290/0x1290
>> kthread+0x36b/0x440
>> ? kthread_create_worker_on_cpu+0xa0/0xa0
>> ret_from_fork+0x22/0x30
>> ==================================================================
>>
>> When the device is already gone we end up with the following scenario:
>> The device's capacity is 0 and thus the number of zones will be 0 as well. When
>> allocating the bitmap for the conventional zones, we then trip over a NULL
>> pointer.
>>
>> So if we encounter a zoned block device with a 0 capacity, don't dare to
>> revalidate the zones sizes.
>>
>> Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
>> ---
>>
>> Note: This is a hot-fix for 5.8, we're working on something to make a
>> recoverable error recoverable.
>>
>>
>> block/blk-zoned.c | 3 +++
>> 1 file changed, 3 insertions(+)
>>
>> diff --git a/block/blk-zoned.c b/block/blk-zoned.c
>> index 23831fa8701d..480dfff69a00 100644
>> --- a/block/blk-zoned.c
>> +++ b/block/blk-zoned.c
>> @@ -497,6 +497,9 @@ int blk_revalidate_disk_zones(struct gendisk *disk,
>> if (WARN_ON_ONCE(!queue_is_mq(q)))
>> return -EIO;
>>
>> + if (!get_capacity(disk))
>> + return -EIO;
>> +
>> /*
>> * Ensure that all memory allocations in this context are done as if
>> * GFP_NOIO was specified.
>>
>
> I reworked sd_zbc_read_zones() and sd_zbc_revalidate_zones() to allow recovering
> from simple temporary errors and avoid this problem. Will send the patch
> tomorrow or so after some more testing.
>
> But even with that patch applied, I think this patch makes the generic block
> code more solid. So:
>
> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
>
>
Jens any chance we can still get this into 5.8?
next prev parent reply other threads:[~2020-07-31 7:43 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20200730112517.12816-1-johannes.thumshirn@wdc.com>
2020-07-30 12:32 ` [PATCH] block: don't do revalidate zones on invalid devices Damien Le Moal
2020-07-31 7:43 ` Johannes Thumshirn [this message]
2020-07-31 8:01 ` Damien Le Moal
2020-07-31 8:41 ` Johannes Thumshirn
2020-07-31 22:33 ` Jens Axboe
2020-08-03 8:49 ` Johannes Thumshirn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=SN4PR0401MB3598C060632877CA0C46918A9B4E0@SN4PR0401MB3598.namprd04.prod.outlook.com \
--to=johannes.thumshirn@wdc.com \
--cc=Damien.LeMoal@wdc.com \
--cc=axboe@kernel.dk \
--cc=linux-block@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).