From: Hannes Reinecke <hare@suse.de>
To: James Smart <jsmart2021@gmail.com>, linux-scsi@vger.kernel.org
Cc: maier@linux.ibm.com, dwagner@suse.de, bvanassche@acm.org,
Ram Vegesna <ram.vegesna@broadcom.com>
Subject: Re: [PATCH v2 31/32] elx: efct: Add Makefile and Kconfig for efct driver
Date: Thu, 9 Jan 2020 12:47:12 +0100 [thread overview]
Message-ID: <bc57009a-4f5a-3595-8c57-0289a2e1dc03@suse.de> (raw)
In-Reply-To: <20191220223723.26563-32-jsmart2021@gmail.com>
On 12/20/19 11:37 PM, James Smart wrote:
> This patch completes the efct driver population.
>
> This patch adds driver definitions for:
> Adds the efct driver Kconfig and Makefiles
>
> Signed-off-by: Ram Vegesna <ram.vegesna@broadcom.com>
> Signed-off-by: James Smart <jsmart2021@gmail.com>
> ---
> drivers/scsi/elx/Kconfig | 9 +++++++++
> drivers/scsi/elx/Makefile | 30 ++++++++++++++++++++++++++++++
> 2 files changed, 39 insertions(+)
> create mode 100644 drivers/scsi/elx/Kconfig
> create mode 100644 drivers/scsi/elx/Makefile
>
> diff --git a/drivers/scsi/elx/Kconfig b/drivers/scsi/elx/Kconfig
> new file mode 100644
> index 000000000000..ec710ade44f3
> --- /dev/null
> +++ b/drivers/scsi/elx/Kconfig
> @@ -0,0 +1,9 @@
> +config SCSI_EFCT
> + tristate "Emulex Fibre Channel Target"
> + depends on PCI && SCSI
> + depends on TARGET_CORE
> + depends on SCSI_FC_ATTRS
> + select CRC_T10DIF
> + help
> + The efct driver provides enhanced SCSI Target Mode
> + support for specific SLI-4 adapters.
> diff --git a/drivers/scsi/elx/Makefile b/drivers/scsi/elx/Makefile
> new file mode 100644
> index 000000000000..79cc4e57676e
> --- /dev/null
> +++ b/drivers/scsi/elx/Makefile
> @@ -0,0 +1,30 @@
> +#/*******************************************************************
> +# * This file is part of the Emulex Linux Device Driver for *
> +# * Fibre Channel Host Bus Adapters. *
> +# * Copyright (C) 2018 Broadcom. All Rights Reserved. The term *
> +# * “Broadcom” refers to Broadcom Inc. and/or its subsidiaries. *
> +# * *
> +# * This program is free software; you can redistribute it and/or *
> +# * modify it under the terms of version 2 of the GNU General *
> +# * Public License as published by the Free Software Foundation. *
> +# * This program is distributed in the hope that it will be useful. *
> +# * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND *
> +# * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, *
> +# * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE *
> +# * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
> +# * TO BE LEGALLY INVALID. See the GNU General Public License for *
> +# * more details, a copy of which can be found in the file COPYING *
> +# * included with this package. *
> +# ********************************************************************/
> +
Use SPDX identifier here.
> +obj-$(CONFIG_SCSI_EFCT) := efct.o
> +
> +efct-objs := efct/efct_driver.o efct/efct_io.o efct/efct_scsi.o efct/efct_els.o \
> + efct/efct_xport.o efct/efct_hw.o efct/efct_hw_queues.o \
> + efct/efct_utils.o efct/efct_lio.o efct/efct_unsol.o
> +
> +efct-objs += libefc/efc_domain.o libefc/efc_fabric.o libefc/efc_node.o \
> + libefc/efc_sport.o libefc/efc_device.o \
> + libefc/efc_lib.o libefc/efc_sm.o
> +
> +efct-objs += libefc_sli/sli4.o
>
Cheers,
Hannes
--
Dr. Hannes Reinecke Teamlead Storage & Networking
hare@suse.de +49 911 74053 688
SUSE Software Solutions Germany GmbH, Maxfeldstr. 5, 90409 Nürnberg
HRB 36809 (AG Nürnberg), GF: Felix Imendörffer
next prev parent reply other threads:[~2020-01-09 11:47 UTC|newest]
Thread overview: 77+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-20 22:36 [PATCH v2 00/32] [NEW] efct: Broadcom (Emulex) FC Target driver James Smart
2019-12-20 22:36 ` [PATCH v2 01/32] elx: libefc_sli: SLI-4 register offsets and field definitions James Smart
2020-01-08 7:11 ` Hannes Reinecke
2020-01-09 0:59 ` James Smart
2019-12-20 22:36 ` [PATCH v2 02/32] elx: libefc_sli: SLI Descriptors and Queue entries James Smart
2020-01-08 7:24 ` Hannes Reinecke
2020-01-09 1:00 ` James Smart
2019-12-20 22:36 ` [PATCH v2 03/32] elx: libefc_sli: Data structures and defines for mbox commands James Smart
2020-01-08 7:32 ` Hannes Reinecke
2020-01-09 1:03 ` James Smart
2019-12-20 22:36 ` [PATCH v2 04/32] elx: libefc_sli: queue create/destroy/parse routines James Smart
2020-01-08 7:45 ` Hannes Reinecke
2020-01-09 1:04 ` James Smart
2019-12-20 22:36 ` [PATCH v2 05/32] elx: libefc_sli: Populate and post different WQEs James Smart
2020-01-08 7:54 ` Hannes Reinecke
2020-01-09 1:04 ` James Smart
2019-12-20 22:36 ` [PATCH v2 06/32] elx: libefc_sli: bmbx routines and SLI config commands James Smart
2020-01-08 8:05 ` Hannes Reinecke
2019-12-20 22:36 ` [PATCH v2 07/32] elx: libefc_sli: APIs to setup SLI library James Smart
2020-01-08 8:22 ` Hannes Reinecke
2020-01-09 1:29 ` James Smart
2019-12-20 22:36 ` [PATCH v2 08/32] elx: libefc: Generic state machine framework James Smart
2020-01-09 7:05 ` Hannes Reinecke
2019-12-20 22:37 ` [PATCH v2 09/32] elx: libefc: Emulex FC discovery library APIs and definitions James Smart
2020-01-09 7:16 ` Hannes Reinecke
2019-12-20 22:37 ` [PATCH v2 10/32] elx: libefc: FC Domain state machine interfaces James Smart
2020-01-09 7:27 ` Hannes Reinecke
2019-12-20 22:37 ` [PATCH v2 11/32] elx: libefc: SLI and FC PORT " James Smart
2020-01-09 7:34 ` Hannes Reinecke
2019-12-20 22:37 ` [PATCH v2 12/32] elx: libefc: Remote node " James Smart
2020-01-09 8:31 ` Hannes Reinecke
2020-01-09 9:57 ` Daniel Wagner
2019-12-20 22:37 ` [PATCH v2 13/32] elx: libefc: Fabric " James Smart
2020-01-09 8:34 ` Hannes Reinecke
2019-12-20 22:37 ` [PATCH v2 14/32] elx: libefc: FC node ELS and state handling James Smart
2020-01-09 8:39 ` Hannes Reinecke
2019-12-20 22:37 ` [PATCH v2 15/32] elx: efct: Data structures and defines for hw operations James Smart
2020-01-09 8:41 ` Hannes Reinecke
2019-12-20 22:37 ` [PATCH v2 16/32] elx: efct: Driver initialization routines James Smart
2020-01-09 9:01 ` Hannes Reinecke
2019-12-20 22:37 ` [PATCH v2 17/32] elx: efct: Hardware queues creation and deletion James Smart
2020-01-09 9:10 ` Hannes Reinecke
2019-12-20 22:37 ` [PATCH v2 18/32] elx: efct: RQ buffer, memory pool allocation and deallocation APIs James Smart
2020-01-09 9:13 ` Hannes Reinecke
2019-12-20 22:37 ` [PATCH v2 19/32] elx: efct: Hardware IO and SGL initialization James Smart
2020-01-09 9:22 ` Hannes Reinecke
2019-12-20 22:37 ` [PATCH v2 20/32] elx: efct: Hardware queues processing James Smart
2020-01-09 9:24 ` Hannes Reinecke
2019-12-20 22:37 ` [PATCH v2 21/32] elx: efct: Unsolicited FC frame processing routines James Smart
2020-01-09 9:26 ` Hannes Reinecke
2019-12-20 22:37 ` [PATCH v2 22/32] elx: efct: Extended link Service IO handling James Smart
2020-01-09 9:38 ` Hannes Reinecke
2019-12-20 22:37 ` [PATCH v2 23/32] elx: efct: SCSI IO handling routines James Smart
2020-01-09 9:41 ` Hannes Reinecke
2019-12-20 22:37 ` [PATCH v2 24/32] elx: efct: LIO backend interface routines James Smart
2020-01-09 3:56 ` Bart Van Assche
2019-12-20 22:37 ` [PATCH v2 25/32] elx: efct: Hardware IO submission routines James Smart
2020-01-09 9:52 ` Hannes Reinecke
2019-12-20 22:37 ` [PATCH v2 26/32] elx: efct: link statistics and SFP data James Smart
2020-01-09 10:12 ` Hannes Reinecke
2019-12-20 22:37 ` [PATCH v2 27/32] elx: efct: xport and hardware teardown routines James Smart
2020-01-09 10:14 ` Hannes Reinecke
2019-12-20 22:37 ` [PATCH v2 28/32] elx: efct: IO timeout handling routines James Smart
2020-01-09 11:27 ` Hannes Reinecke
2019-12-20 22:37 ` [PATCH v2 29/32] elx: efct: Firmware update, async link processing James Smart
2020-01-09 11:45 ` Hannes Reinecke
2019-12-20 22:37 ` [PATCH v2 30/32] elx: efct: scsi_transport_fc host interface support James Smart
2020-01-09 11:46 ` Hannes Reinecke
2019-12-20 22:37 ` [PATCH v2 31/32] elx: efct: Add Makefile and Kconfig for efct driver James Smart
2019-12-20 23:17 ` Randy Dunlap
2020-01-09 11:47 ` Hannes Reinecke [this message]
2019-12-20 22:37 ` [PATCH v2 32/32] elx: efct: Tie into kernel Kconfig and build process James Smart
2019-12-24 7:45 ` kbuild test robot
2019-12-24 21:01 ` Nathan Chancellor
2019-12-25 16:09 ` James Smart
2020-01-09 11:47 ` Hannes Reinecke
2019-12-29 18:27 ` [PATCH v2 00/32] [NEW] efct: Broadcom (Emulex) FC Target driver Sebastian Herbszt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=bc57009a-4f5a-3595-8c57-0289a2e1dc03@suse.de \
--to=hare@suse.de \
--cc=bvanassche@acm.org \
--cc=dwagner@suse.de \
--cc=jsmart2021@gmail.com \
--cc=linux-scsi@vger.kernel.org \
--cc=maier@linux.ibm.com \
--cc=ram.vegesna@broadcom.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).