From: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
To: Xin Long <lucien.xin@gmail.com>
Cc: network dev <netdev@vger.kernel.org>,
linux-sctp@vger.kernel.org, Neil Horman <nhorman@tuxdriver.com>,
Michael Tuexen <tuexen@fh-muenster.de>,
Tom Herbert <therbert@google.com>,
davem@davemloft.net
Subject: Re: [PATCH net-next 11/15] sctp: add udphdr to overhead when udp_port is set
Date: Sat, 03 Oct 2020 04:07:29 +0000 [thread overview]
Message-ID: <20201003040729.GF70998@localhost.localdomain> (raw)
In-Reply-To: <7ff312f910ada8893fa4db57d341c628d1122640.1601387231.git.lucien.xin@gmail.com>
On Tue, Sep 29, 2020 at 09:49:03PM +0800, Xin Long wrote:
> sctp_mtu_payload() is for calculating the frag size before making
> chunks from a msg. So we should only add udphdr size to overhead
> when udp socks are listening, as only then sctp can handling the
"handle" ^^^^
> incoming sctp over udp packets and outgoing sctp over udp packets
> will be possible.
>
> Note that we can't do this according to transport->encap_port, as
> different transports may be set to different values, while the
> chunks were made before choosing the transport, we could not be
> able to meet all rfc6951#section-5.6 requires.
I don't follow this last part. I guess you're referring to the fact
that it won't grow back the PMTU if it is not encapsulating anymore.
If that's it, then changelog should be different here. As is, it
seems it is not abiding by the RFC, but it is, as that's a 'SHOULD'.
Maybe s/requires\.$/recommends./ ?
WARNING: multiple messages have this Message-ID (diff)
From: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
To: Xin Long <lucien.xin@gmail.com>
Cc: network dev <netdev@vger.kernel.org>,
linux-sctp@vger.kernel.org, Neil Horman <nhorman@tuxdriver.com>,
Michael Tuexen <tuexen@fh-muenster.de>,
Tom Herbert <therbert@google.com>,
davem@davemloft.net
Subject: Re: [PATCH net-next 11/15] sctp: add udphdr to overhead when udp_port is set
Date: Sat, 3 Oct 2020 01:07:29 -0300 [thread overview]
Message-ID: <20201003040729.GF70998@localhost.localdomain> (raw)
Message-ID: <20201003040729.QsJyE0ikLsglwriPU8R-CcooMBEaTGAqXZB-fNihjG4@z> (raw)
In-Reply-To: <7ff312f910ada8893fa4db57d341c628d1122640.1601387231.git.lucien.xin@gmail.com>
On Tue, Sep 29, 2020 at 09:49:03PM +0800, Xin Long wrote:
> sctp_mtu_payload() is for calculating the frag size before making
> chunks from a msg. So we should only add udphdr size to overhead
> when udp socks are listening, as only then sctp can handling the
"handle" ^^^^
> incoming sctp over udp packets and outgoing sctp over udp packets
> will be possible.
>
> Note that we can't do this according to transport->encap_port, as
> different transports may be set to different values, while the
> chunks were made before choosing the transport, we could not be
> able to meet all rfc6951#section-5.6 requires.
I don't follow this last part. I guess you're referring to the fact
that it won't grow back the PMTU if it is not encapsulating anymore.
If that's it, then changelog should be different here. As is, it
seems it is not abiding by the RFC, but it is, as that's a 'SHOULD'.
Maybe s/requires\.$/recommends./ ?
next prev parent reply other threads:[~2020-10-03 4:07 UTC|newest]
Thread overview: 82+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-29 13:48 [PATCH net-next 00/15] sctp: Implement RFC6951: UDP Encapsulation of SCTP Xin Long
2020-09-29 13:48 ` Xin Long
2020-09-29 13:48 ` [PATCH net-next 01/15] udp: check udp sock encap_type in __udp_lib_err Xin Long
2020-09-29 13:48 ` Xin Long
2020-09-29 13:48 ` [PATCH net-next 02/15] udp6: move the mss check after udp gso tunnel processing Xin Long
2020-09-29 13:48 ` Xin Long
2020-09-29 13:48 ` [PATCH net-next 03/15] udp: do checksum properly in skb_udp_tunnel_segment Xin Long
2020-09-29 13:48 ` Xin Long
2020-09-29 13:48 ` [PATCH net-next 04/15] udp: support sctp over udp " Xin Long
2020-09-29 13:48 ` Xin Long
2020-09-29 13:48 ` [PATCH net-next 05/15] sctp: create udp4 sock and add its encap_rcv Xin Long
2020-09-29 13:48 ` Xin Long
2020-09-29 13:48 ` [PATCH net-next 06/15] sctp: create udp6 sock and set " Xin Long
2020-09-29 13:48 ` Xin Long
2020-09-29 13:48 ` [PATCH net-next 07/15] sctp: add encap_err_lookup for udp encap socks Xin Long
2020-09-29 13:48 ` Xin Long
2020-09-29 13:49 ` [PATCH net-next 08/15] sctp: add encap_port for netns sock asoc and transport Xin Long
2020-09-29 13:49 ` Xin Long
2020-09-29 13:49 ` [PATCH net-next 09/15] sctp: add SCTP_REMOTE_UDP_ENCAPS_PORT sockopt Xin Long
2020-09-29 13:49 ` Xin Long
2020-09-29 13:49 ` [PATCH net-next 10/15] sctp: allow changing transport encap_port by peer packets Xin Long
2020-09-29 13:49 ` Xin Long
2020-09-29 13:49 ` [PATCH net-next 11/15] sctp: add udphdr to overhead when udp_port is set Xin Long
2020-09-29 13:49 ` Xin Long
2020-09-29 13:49 ` [PATCH net-next 12/15] sctp: call sk_setup_caps in sctp_packet_transmit instead Xin Long
2020-09-29 13:49 ` Xin Long
2020-09-29 13:49 ` [PATCH net-next 13/15] sctp: support for sending packet over udp4 sock Xin Long
2020-09-29 13:49 ` Xin Long
2020-09-29 13:49 ` [PATCH net-next 14/15] sctp: support for sending packet over udp6 sock Xin Long
2020-09-29 13:49 ` Xin Long
2020-09-29 13:49 ` [PATCH net-next 15/15] sctp: enable udp tunneling socks Xin Long
2020-09-29 13:49 ` Xin Long
2020-10-03 4:12 ` Marcelo Ricardo Leitner
2020-10-03 4:12 ` Marcelo Ricardo Leitner
2020-10-03 8:20 ` Xin Long
2020-10-03 8:20 ` Xin Long
2020-09-29 16:25 ` [PATCH net-next 13/15] sctp: support for sending packet over udp4 sock kernel test robot
2020-09-29 16:25 ` kernel test robot
2020-09-30 6:26 ` Xin Long
2020-09-30 6:26 ` Xin Long
2020-09-29 19:19 ` kernel test robot
2020-09-29 19:19 ` kernel test robot
2020-10-03 4:09 ` [PATCH net-next 12/15] sctp: call sk_setup_caps in sctp_packet_transmit instead Marcelo Ricardo Leitner
2020-10-03 4:09 ` Marcelo Ricardo Leitner
2020-10-03 7:45 ` Xin Long
2020-10-03 7:45 ` Xin Long
2020-09-29 19:00 ` [PATCH net-next 11/15] sctp: add udphdr to overhead when udp_port is set kernel test robot
2020-09-29 19:00 ` kernel test robot
2020-10-03 4:08 ` Marcelo Ricardo Leitner
2020-10-03 4:08 ` Marcelo Ricardo Leitner
2020-10-03 7:57 ` Xin Long
2020-10-03 8:12 ` Xin Long
2020-10-03 11:23 ` Xin Long
2020-10-03 11:23 ` Xin Long
2020-10-03 12:24 ` Xin Long
2020-10-03 12:24 ` Xin Long
2020-10-05 19:01 ` Marcelo Ricardo Leitner
2020-10-05 19:01 ` Marcelo Ricardo Leitner
2020-10-05 20:08 ` Michael Tuexen
2020-10-05 20:08 ` Michael Tuexen
2020-10-08 9:37 ` Xin Long
2020-10-08 9:37 ` Xin Long
2020-10-03 4:07 ` Marcelo Ricardo Leitner [this message]
2020-10-03 4:07 ` Marcelo Ricardo Leitner
2020-10-03 7:54 ` Xin Long
2020-10-03 7:54 ` Xin Long
2020-10-03 4:06 ` [PATCH net-next 10/15] sctp: allow changing transport encap_port by peer packets Marcelo Ricardo Leitner
2020-10-03 4:06 ` Marcelo Ricardo Leitner
2020-10-03 4:05 ` [PATCH net-next 09/15] sctp: add SCTP_REMOTE_UDP_ENCAPS_PORT sockopt Marcelo Ricardo Leitner
2020-10-03 4:05 ` Marcelo Ricardo Leitner
2020-10-03 7:41 ` Xin Long
2020-10-03 7:41 ` Xin Long
2020-10-03 4:04 ` [PATCH net-next 03/15] udp: do checksum properly in skb_udp_tunnel_segment Marcelo Ricardo Leitner
2020-10-03 4:04 ` Marcelo Ricardo Leitner
2020-10-03 7:40 ` Xin Long
2020-10-03 7:40 ` Xin Long
2020-09-29 16:39 ` [PATCH net-next 00/15] sctp: Implement RFC6951: UDP Encapsulation of SCTP Michael Tuexen
2020-09-29 16:39 ` Michael Tuexen
2020-09-29 17:49 ` Xin Long
2020-09-29 18:04 ` Xin Long
2020-10-01 12:41 ` Marcelo Ricardo Leitner
2020-10-01 12:41 ` Marcelo Ricardo Leitner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201003040729.GF70998@localhost.localdomain \
--to=marcelo.leitner@gmail.com \
--cc=davem@davemloft.net \
--cc=linux-sctp@vger.kernel.org \
--cc=lucien.xin@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=nhorman@tuxdriver.com \
--cc=therbert@google.com \
--cc=tuexen@fh-muenster.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).