Re: [PATCH v11 00/16] Remove nested TPM operations

[Alexander Steffen <Alexander.Steffen@infineon.com>]

On 06.02.2019 13:06, Jarkko Sakkinen wrote:
> On Wed, Feb 06, 2019 at 12:47:07AM +0200, Jarkko Sakkinen wrote:
>> Make the changes necessary to detach TPM space code and TPM activation
>> code out of the tpm_transmit() flow because of both of these can cause
>> nested tpm_transmit() calls. The nesteds calls make the whole flow hard
>> to maintain, and thus, it is better to just fix things now before this
>> turns into a bigger mess.
>>
>> v11:
>> * Drop the patch that tries to flush TPM space on system. Not a proper
>>    fallback + out of scope for this patch set.
>>
>> v10:
>> * Use void pointers to avoid unnecessary casts in functions paramaters
>>    where it makes sense.
>>
>> v9:
>> * Fixed again tpm_try_get_ops().
>> * Added missing reviewed-by's.
>>
>> v8:
>> * Re-add the check for ret < 0 after calling tpm_try_transmit() that
>>    was dropped by mistake while moving code.
>> * Fix error fallback for tpm_try_get_ops() when tpm_chip_start()
>>    fails.
>>
>> v7:
>> *  Reorganize series so that more trivial and self-contained changes are
>>     in the head.
>>
>> v6:
>> * When tpm_validate_commmand() was moved to tpm2-space.c, the struct for
>>    the TPM header was incorrectly declared as struct tpm_input_header.
>> * Fix return value in tpm_validate_command().
>>
>> v5:
>> * Add the missing rev's from Stefan Berger.
>>
>> v4:
>> * Return 0 from pcrs_show() when tpm1_pcr_read() fails.
>> * Fix error handling flow in tpm_try_transmit().
>> * Replace struct tpm_input_header and struct tpm_output_header with
>>    struct tpm_header.
>>
>> v3:
>> * Encapsulate power gating code to tpm_chip_start() and tpm_chip_stop().
>> * Move TPM power gating code and locking to tpm_try_get_ops() and
>>    tpm_put_ops().
>> * Call power gating code directly in tpm_chip_register() and
>>    tpm2_del_space().
>>
>> v2:
>> * Print tpm2_commit_space() error inside tpm2_commit_space()
>> * Error code was not printed when recv() callback failed. It is
>>    fixed in this version.
>> * Added a patch that removes @space from tpm_transmit().
>> * Fixed a regression in earlier series. Forgot to amend the change
>>    from the staging area that renames NESTED to UNLOCKED in tpm2-space.c.
>>
>> Jarkko Sakkinen (16):
>>    tpm: use tpm_buf in tpm_transmit_cmd() as the IO parameter
>>    tpm: fix invalid return value in pubek_show()
>>    tpm: return 0 from pcrs_show() when tpm1_pcr_read() fails
>>    tpm: print tpm2_commit_space() error inside tpm2_commit_space()
>>    tpm: declare struct tpm_header
>>    tpm: access command header through struct in tpm_try_transmit()
>>    tpm: encapsulate tpm_dev_transmit()
>>    tpm: clean up tpm_try_transmit() error handling flow
>>    tpm: move tpm_validate_commmand() to tpm2-space.c
>>    tpm: move TPM space code out of tpm_transmit()
>>    tpm: remove @space from tpm_transmit()
>>    tpm: use tpm_try_get_ops() in tpm-sysfs.c.
>>    tpm: remove TPM_TRANSMIT_UNLOCKED flag
>>    tpm: introduce tpm_chip_start() and tpm_chip_stop()
>>    tpm: take TPM chip power gating out of tpm_transmit()
>>    tpm: remove @flags from tpm_transmit()
>>
>>   drivers/char/tpm/tpm-chip.c       | 109 ++++++++++++
>>   drivers/char/tpm/tpm-dev-common.c |  44 ++++-
>>   drivers/char/tpm/tpm-interface.c  | 264 ++++++------------------------
>>   drivers/char/tpm/tpm-sysfs.c      | 138 ++++++++++------
>>   drivers/char/tpm/tpm.h            |  64 +++-----
>>   drivers/char/tpm/tpm1-cmd.c       |  28 +---
>>   drivers/char/tpm/tpm2-cmd.c       |  72 +++-----
>>   drivers/char/tpm/tpm2-space.c     |  91 +++++++---
>>   drivers/char/tpm/tpm_i2c_atmel.c  |   5 +-
>>   drivers/char/tpm/tpm_vtpm_proxy.c |  12 +-
>>   drivers/char/tpm/xen-tpmfront.c   |   2 +-
>>   11 files changed, 408 insertions(+), 421 deletions(-)
>>
>> -- 
>> 2.19.1
>>
> 
> Applied to master and next.

Something in this series seems to break basic TPM communication for me.

For TPM2.0s the probe command fails, causing them to be misdetected as 
TPM1.2s:

---
tpm tpm0: tpm_try_transmit: tpm_send: error -5
tpm_tis MSFT0101:00: 1.2 TPM (device-id 0x1A, rev-id 22)
tpm tpm0: A TPM error (30) occurred attempting to determine the timeouts
---
tpm tpm0: tpm_try_transmit: tpm_send: error -5
tpm_tis_spi spi0.1: 1.2 TPM (device-id 0x1B, rev-id 22)
tpm tpm0: A TPM error (30) occurred attempting to determine the timeouts
---

And for something that actually is a TPM1.2 it fails in a similar way:

---
tpm_i2c_infineon 1-0020: 1.2 TPM (device-id 0x1A)
tpm tpm0: A TPM error (-14) occurred attempting to determine the timeouts
---
tpm tpm0: tpm_try_transmit: tpm_send: error -5
tpm_tis_spi spi0.1: 1.2 TPM (device-id 0x1B, rev-id 16)
tpm tpm0: A TPM error (-14) occurred attempting to determine the timeouts
tpm_tis_spi: probe of spi0.1 failed with error -14
---

I see this problem across my entire range of TPM devices and test 
platforms. Any idea what could be wrong here?

Alexander