Linux-Security-Module Archive on lore.kernel.org
 help / color / Atom feed
From: Stephen Smalley <stephen.smalley.work@gmail.com>
To: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>,
	zohar@linux.ibm.com, casey@schaufler-ca.com
Cc: tyhicks@linux.microsoft.com, sashal@kernel.org,
	jmorris@namei.org, linux-integrity@vger.kernel.org,
	selinux@vger.kernel.org, linux-security-module@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH v5 3/4] LSM: Define SELinux function to measure state and policy
Date: Mon, 3 Aug 2020 11:11:24 -0400
Message-ID: <dfd6f9c8-d62a-d278-9b0e-6b1f5ad03d3e@gmail.com> (raw)
In-Reply-To: <20200730034724.3298-4-nramas@linux.microsoft.com>

On 7/29/20 11:47 PM, Lakshmi Ramasubramanian wrote:

> SELinux configuration and policy are some of the critical data for this
> security module that needs to be measured. This measurement can be used
> by an attestation service, for instance, to verify if the configuration
> and policies have been setup correctly and that they haven't been tampered
> with at runtime.
>
> Measure SELinux configuration, policy capabilities settings, and the
> loaded policy by calling the IMA hooks ima_measure_lsm_state() and
> ima_measure_lsm_policy() respectively.
>
> Sample measurement of SELinux state and hash of the policy:
>
> 10 e32e...5ac3 ima-buf sha256:86e8...4594 selinux-state-1595389364:287899386 696e697469616c697a65643d313b656e61626c65643d313b656e666f7263696e673d303b636865636b72657170726f743d313b6e6574776f726b5f706565725f636f6e74726f6c733d313b6f70656e5f7065726d733d313b657874656e6465645f736f636b65745f636c6173733d313b616c776179735f636865636b5f6e6574776f726b3d303b6367726f75705f7365636c6162656c3d313b6e6e705f6e6f737569645f7472616e736974696f6e3d313b67656e66735f7365636c6162656c5f73796d6c696e6b733d303
> 10 f4a7...9408 ima-ng sha256:8d1d...1834 selinux-policy-hash-1595389353:863934271
>
> To verify the measurement check the following:
>
> Execute the following command to extract the measured data
> from the IMA log for SELinux configuration (selinux-state).
>
>    grep -m 1 "selinux-state" /sys/kernel/security/integrity/ima/ascii_runtime_measurements | cut -d' ' -f 6 | xxd -r -p
>
> The output should be the list of key-value pairs. For example,
>   initialized=1;enabled=1;enforcing=0;checkreqprot=1;network_peer_controls=1;open_perms=1;extended_socket_class=1;always_check_network=0;cgroup_seclabel=1;nnp_nosuid_transition=1;genfs_seclabel_symlinks=0;
>
> To verify the measured data with the current SELinux state:
>
>   => enabled should be set to 1 if /sys/fs/selinux folder exists,
>      0 otherwise
>
> For other entries, compare the integer value in the files
>   => /sys/fs/selinux/enforce
>   => /sys/fs/selinux/checkreqprot
> And, each of the policy capabilities files under
>   => /sys/fs/selinux/policy_capabilities
>
> For selinux-policy-hash, the hash of SELinux policy is included
> in the IMA log entry.
>
> To verify the measured data with the current SELinux policy run
> the following commands and verify the output hash values match.
>
>    sha256sum /sys/fs/selinux/policy | cut -d' ' -f 1
>
>    grep -m 1 "selinux-policy-hash" /sys/kernel/security/integrity/ima/ascii_runtime_measurements | cut -d' ' -f 4
>
> Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
> Suggested-by: Stephen Smalley <stephen.smalley.work@gmail.com>
> Reported-by: kernel test robot <lkp@intel.com> # error: implicit declaration of function 'vfree'
> Reported-by: kernel test robot <lkp@intel.com> # error: implicit declaration of function 'crypto_alloc_shash'
> Reported-by: kernel test robot <lkp@intel.com> # sparse: symbol 'security_read_selinux_policy' was not declared. Should it be static?

Possibly I'm missing something but with these patches applied on top of 
next-integrity, and the following lines added to /etc/ima/ima-policy:

measure func=LSM_STATE template=ima-buf
measure func=LSM_POLICY

I still don't get the selinux-state or selinux-policy-hash entries in 
the ascii_runtime_measurements file.  No errors during loading of the 
ima policy as far as I can see.



  reply index

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-30  3:47 [PATCH v5 0/4] LSM: Measure security module data Lakshmi Ramasubramanian
2020-07-30  3:47 ` [PATCH v5 1/4] IMA: Add func to measure LSM state and policy Lakshmi Ramasubramanian
2020-07-30 15:02   ` Tyler Hicks
2020-07-30 15:15     ` Lakshmi Ramasubramanian
2020-07-30 15:17       ` Tyler Hicks
2020-07-30 16:19     ` Casey Schaufler
2020-07-30 16:33       ` Lakshmi Ramasubramanian
2020-07-30  3:47 ` [PATCH v5 2/4] IMA: Define IMA hooks " Lakshmi Ramasubramanian
2020-07-30 15:04   ` Tyler Hicks
2020-07-30  3:47 ` [PATCH v5 3/4] LSM: Define SELinux function to measure " Lakshmi Ramasubramanian
2020-08-03 15:11   ` Stephen Smalley [this message]
2020-08-03 16:14     ` Lakshmi Ramasubramanian
2020-08-03 20:00       ` Stephen Smalley
2020-08-03 20:29         ` Stephen Smalley
2020-08-03 20:37           ` Lakshmi Ramasubramanian
2020-08-03 21:07             ` Stephen Smalley
2020-08-03 22:08               ` Lakshmi Ramasubramanian
2020-08-04 15:20                 ` Stephen Smalley
2020-08-04 15:29                   ` Stephen Smalley
2020-08-04 15:57                     ` Lakshmi Ramasubramanian
2020-07-30  3:47 ` [PATCH v5 4/4] IMA: Handle early boot data measurement Lakshmi Ramasubramanian
2020-07-30 18:02   ` Lakshmi Ramasubramanian
2020-07-30 20:04     ` Tyler Hicks

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=dfd6f9c8-d62a-d278-9b0e-6b1f5ad03d3e@gmail.com \
    --to=stephen.smalley.work@gmail.com \
    --cc=casey@schaufler-ca.com \
    --cc=jmorris@namei.org \
    --cc=linux-integrity@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-security-module@vger.kernel.org \
    --cc=nramas@linux.microsoft.com \
    --cc=sashal@kernel.org \
    --cc=selinux@vger.kernel.org \
    --cc=tyhicks@linux.microsoft.com \
    --cc=zohar@linux.ibm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Security-Module Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-security-module/0 linux-security-module/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-security-module linux-security-module/ https://lore.kernel.org/linux-security-module \
		linux-security-module@vger.kernel.org
	public-inbox-index linux-security-module

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-security-module


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git