From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
To: Geert Uytterhoeven <geert+renesas@glider.be>,
Magnus Damm <magnus.damm@gmail.com>,
Rob Herring <robh+dt@kernel.org>,
Bartosz Golaszewski <bgolaszewski@baylibre.com>,
Thomas Gleixner <tglx@linutronix.de>,
Jason Cooper <jason@lakedaemon.net>,
Marc Zyngier <maz@kernel.org>,
Ulf Hansson <ulf.hansson@linaro.org>,
Linus Walleij <linus.walleij@linaro.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-renesas-soc@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-mmc@vger.kernel.org,
linux-gpio@vger.kernel.org, linux-serial@vger.kernel.org,
Prabhakar <prabhakar.csengg@gmail.com>,
Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Subject: [PATCH v2 7/9] ARM: dts: r8a7742: Add [H]SCIF{A|B} support
Date: Wed, 6 May 2020 20:51:33 +0100 [thread overview]
Message-ID: <1588794695-27852-8-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com> (raw)
In-Reply-To: <1588794695-27852-1-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com>
Describe [H]SCIF{A|B} ports in the R8A7742 device tree.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
v1->v2:
* Included the nodes in sort order
---
arch/arm/boot/dts/r8a7742.dtsi | 155 +++++++++++++++++++++++++++++++++
1 file changed, 155 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7742.dtsi b/arch/arm/boot/dts/r8a7742.dtsi
index 06a4241bafd8..439ff24e7b3a 100644
--- a/arch/arm/boot/dts/r8a7742.dtsi
+++ b/arch/arm/boot/dts/r8a7742.dtsi
@@ -335,6 +335,36 @@
dma-channels = <15>;
};
+ scifa0: serial@e6c40000 {
+ compatible = "renesas,scifa-r8a7742",
+ "renesas,rcar-gen2-scifa", "renesas,scifa";
+ reg = <0 0xe6c40000 0 0x40>;
+ interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 204>;
+ clock-names = "fck";
+ dmas = <&dmac0 0x21>, <&dmac0 0x22>,
+ <&dmac1 0x21>, <&dmac1 0x22>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+ resets = <&cpg 204>;
+ status = "disabled";
+ };
+
+ scifa1: serial@e6c50000 {
+ compatible = "renesas,scifa-r8a7742",
+ "renesas,rcar-gen2-scifa", "renesas,scifa";
+ reg = <0 0xe6c50000 0 0x40>;
+ interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 203>;
+ clock-names = "fck";
+ dmas = <&dmac0 0x25>, <&dmac0 0x26>,
+ <&dmac1 0x25>, <&dmac1 0x26>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+ resets = <&cpg 203>;
+ status = "disabled";
+ };
+
scifa2: serial@e6c60000 {
compatible = "renesas,scifa-r8a7742",
"renesas,rcar-gen2-scifa", "renesas,scifa";
@@ -350,6 +380,131 @@
status = "disabled";
};
+ scifb0: serial@e6c20000 {
+ compatible = "renesas,scifb-r8a7742",
+ "renesas,rcar-gen2-scifb", "renesas,scifb";
+ reg = <0 0xe6c20000 0 0x100>;
+ interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 206>;
+ clock-names = "fck";
+ dmas = <&dmac0 0x3d>, <&dmac0 0x3e>,
+ <&dmac1 0x3d>, <&dmac1 0x3e>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+ resets = <&cpg 206>;
+ status = "disabled";
+ };
+
+ scifb1: serial@e6c30000 {
+ compatible = "renesas,scifb-r8a7742",
+ "renesas,rcar-gen2-scifb", "renesas,scifb";
+ reg = <0 0xe6c30000 0 0x100>;
+ interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 207>;
+ clock-names = "fck";
+ dmas = <&dmac0 0x19>, <&dmac0 0x1a>,
+ <&dmac1 0x19>, <&dmac1 0x1a>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+ resets = <&cpg 207>;
+ status = "disabled";
+ };
+
+ scifb2: serial@e6ce0000 {
+ compatible = "renesas,scifb-r8a7742",
+ "renesas,rcar-gen2-scifb", "renesas,scifb";
+ reg = <0 0xe6ce0000 0 0x100>;
+ interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 216>;
+ clock-names = "fck";
+ dmas = <&dmac0 0x1d>, <&dmac0 0x1e>,
+ <&dmac1 0x1d>, <&dmac1 0x1e>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+ resets = <&cpg 216>;
+ status = "disabled";
+ };
+
+ scif0: serial@e6e60000 {
+ compatible = "renesas,scif-r8a7742",
+ "renesas,rcar-gen2-scif", "renesas,scif";
+ reg = <0 0xe6e60000 0 0x40>;
+ interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 721>,
+ <&cpg CPG_CORE R8A7742_CLK_ZS>, <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0x29>, <&dmac0 0x2a>,
+ <&dmac1 0x29>, <&dmac1 0x2a>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+ resets = <&cpg 721>;
+ status = "disabled";
+ };
+
+ scif1: serial@e6e68000 {
+ compatible = "renesas,scif-r8a7742",
+ "renesas,rcar-gen2-scif", "renesas,scif";
+ reg = <0 0xe6e68000 0 0x40>;
+ interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 720>,
+ <&cpg CPG_CORE R8A7742_CLK_ZS>, <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0x2d>, <&dmac0 0x2e>,
+ <&dmac1 0x2d>, <&dmac1 0x2e>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+ resets = <&cpg 720>;
+ status = "disabled";
+ };
+
+ scif2: serial@e6e56000 {
+ compatible = "renesas,scif-r8a7742",
+ "renesas,rcar-gen2-scif", "renesas,scif";
+ reg = <0 0xe6e56000 0 0x40>;
+ interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 310>,
+ <&cpg CPG_CORE R8A7742_CLK_ZS>, <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0x2b>, <&dmac0 0x2c>,
+ <&dmac1 0x2b>, <&dmac1 0x2c>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+ resets = <&cpg 310>;
+ status = "disabled";
+ };
+
+ hscif0: serial@e62c0000 {
+ compatible = "renesas,hscif-r8a7742",
+ "renesas,rcar-gen2-hscif", "renesas,hscif";
+ reg = <0 0xe62c0000 0 0x60>;
+ interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 717>,
+ <&cpg CPG_CORE R8A7742_CLK_ZS>, <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0x39>, <&dmac0 0x3a>,
+ <&dmac1 0x39>, <&dmac1 0x3a>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+ resets = <&cpg 717>;
+ status = "disabled";
+ };
+
+ hscif1: serial@e62c8000 {
+ compatible = "renesas,hscif-r8a7742",
+ "renesas,rcar-gen2-hscif", "renesas,hscif";
+ reg = <0 0xe62c8000 0 0x60>;
+ interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 716>,
+ <&cpg CPG_CORE R8A7742_CLK_ZS>, <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0x4d>, <&dmac0 0x4e>,
+ <&dmac1 0x4d>, <&dmac1 0x4e>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+ resets = <&cpg 716>;
+ status = "disabled";
+ };
+
mmcif1: mmc@ee220000 {
compatible = "renesas,mmcif-r8a7742",
"renesas,sh-mmcif";
--
2.17.1
next prev parent reply other threads:[~2020-05-06 19:52 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-06 19:51 [PATCH v2 0/9] RZ/G1H describe IRQC, [H]SCIF{A|B} and GPIO nodes Lad Prabhakar
2020-05-06 19:51 ` [PATCH v2 1/9] dt-bindings: mmc: renesas,mmcif: Document r8a7742 DT bindings Lad Prabhakar
2020-05-07 9:29 ` Ulf Hansson
2020-05-06 19:51 ` [PATCH v2 2/9] dt-bindings: irqchip: renesas-irqc: Document r8a7742 bindings Lad Prabhakar
2020-05-14 18:43 ` Rob Herring
2020-05-14 18:57 ` Rob Herring
2020-05-06 19:51 ` [PATCH v2 3/9] ARM: dts: r8a7742: Add IRQC support Lad Prabhakar
2020-05-06 19:51 ` [PATCH v2 4/9] dt-bindings: serial: renesas,scif: Document r8a7742 bindings Lad Prabhakar
2020-05-14 18:57 ` Rob Herring
2020-05-06 19:51 ` [PATCH v2 5/9] dt-bindings: serial: renesas,scifb: " Lad Prabhakar
2020-05-14 18:58 ` Rob Herring
2020-05-06 19:51 ` [PATCH v2 6/9] dt-bindings: serial: renesas,hscif: " Lad Prabhakar
2020-05-14 18:58 ` Rob Herring
2020-05-06 19:51 ` Lad Prabhakar [this message]
2020-05-06 19:51 ` [PATCH v2 8/9] dt-bindings: gpio: renesas,gpio-rcar: Add r8a7742 (RZ/G1H) support Lad Prabhakar
2020-05-06 19:51 ` [PATCH v2 9/9] ARM: dts: r8a7742: Add GPIO nodes Lad Prabhakar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1588794695-27852-8-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com \
--to=prabhakar.mahadev-lad.rj@bp.renesas.com \
--cc=bgolaszewski@baylibre.com \
--cc=devicetree@vger.kernel.org \
--cc=geert+renesas@glider.be \
--cc=gregkh@linuxfoundation.org \
--cc=jason@lakedaemon.net \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
--cc=magnus.damm@gmail.com \
--cc=maz@kernel.org \
--cc=prabhakar.csengg@gmail.com \
--cc=robh+dt@kernel.org \
--cc=tglx@linutronix.de \
--cc=ulf.hansson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).