From: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
To: linux-mips@linux-mips.org, linux-serial@vger.kernel.org,
linux-kernel@vger.kernel.org
Cc: ralf@linux-mips.org, akpm@linux-foundation.org
Subject: (unknown)
Date: Sun, 25 Nov 2007 03:10:01 +0100 (CET) [thread overview]
Message-ID: <20071125021001.A7B8AC222A@solo.franken.de> (raw)
Date: Sun, 25 Nov 2007 03:02:20 +0100
Subject: [PATCH] IP22ZILOG: fix lockup and sysrq
- fix lockup when switching from early console to real console
- make sysrq reliable
- fix panic, if sysrq is issued before console is opened
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
---
arch/mips/sgi-ip22/ip22-setup.c | 19 ---
drivers/serial/ip22zilog.c | 247 +++++++++++++++++----------------------
include/linux/serial_core.h | 2 +-
3 files changed, 107 insertions(+), 161 deletions(-)
diff --git a/arch/mips/sgi-ip22/ip22-setup.c b/arch/mips/sgi-ip22/ip22-setup.c
index 174f09e..5f389ee 100644
--- a/arch/mips/sgi-ip22/ip22-setup.c
+++ b/arch/mips/sgi-ip22/ip22-setup.c
@@ -31,25 +31,6 @@
unsigned long sgi_gfxaddr;
EXPORT_SYMBOL_GPL(sgi_gfxaddr);
-/*
- * Stop-A is originally a Sun thing that isn't standard on IP22 so to avoid
- * accidents it's disabled by default on IP22.
- *
- * FIXME: provide a mechanism to change the value of stop_a_enabled.
- */
-int stop_a_enabled;
-
-void ip22_do_break(void)
-{
- if (!stop_a_enabled)
- return;
-
- printk("\n");
- ArcEnterInteractiveMode();
-}
-
-EXPORT_SYMBOL(ip22_do_break);
-
extern void ip22_be_init(void) __init;
void __init plat_mem_setup(void)
diff --git a/drivers/serial/ip22zilog.c b/drivers/serial/ip22zilog.c
index f3257f7..9c95bc0 100644
--- a/drivers/serial/ip22zilog.c
+++ b/drivers/serial/ip22zilog.c
@@ -45,8 +45,6 @@
#include "ip22zilog.h"
-void ip22_do_break(void);
-
/*
* On IP22 we need to delay after register accesses but we do not need to
* flush writes.
@@ -81,12 +79,9 @@ struct uart_ip22zilog_port {
#define IP22ZILOG_FLAG_REGS_HELD 0x00000040
#define IP22ZILOG_FLAG_TX_STOPPED 0x00000080
#define IP22ZILOG_FLAG_TX_ACTIVE 0x00000100
+#define IP22ZILOG_FLAG_RESET_DONE 0x00000200
- unsigned int cflag;
-
- /* L1-A keyboard break state. */
- int kbd_id;
- int l1_down;
+ unsigned int tty_break;
unsigned char parity_mask;
unsigned char prev_status;
@@ -250,13 +245,26 @@ static void ip22zilog_maybe_update_regs(struct uart_ip22zilog_port *up,
}
}
-static void ip22zilog_receive_chars(struct uart_ip22zilog_port *up,
- struct zilog_channel *channel)
+#define Rx_BRK 0x0100 /* BREAK event software flag. */
+#define Rx_SYS 0x0200 /* SysRq event software flag. */
+
+static struct tty_struct *ip22zilog_receive_chars(struct uart_ip22zilog_port *up,
+ struct zilog_channel *channel)
{
- struct tty_struct *tty = up->port.info->tty; /* XXX info==NULL? */
+ struct tty_struct *tty;
+ unsigned char ch, flag;
+ unsigned int r1;
+
+ tty = NULL;
+ if (up->port.info != NULL &&
+ up->port.info->tty != NULL)
+ tty = up->port.info->tty;
- while (1) {
- unsigned char ch, r1, flag;
+ for (;;) {
+ ch = readb(&channel->control);
+ ZSDELAY();
+ if (!(ch & Rx_CH_AV))
+ break;
r1 = read_zsreg(channel, R1);
if (r1 & (PAR_ERR | Rx_OVR | CRC_ERR)) {
@@ -265,43 +273,26 @@ static void ip22zilog_receive_chars(struct uart_ip22zilog_port *up,
ZS_WSYNC(channel);
}
- ch = readb(&channel->control);
- ZSDELAY();
-
- /* This funny hack depends upon BRK_ABRT not interfering
- * with the other bits we care about in R1.
- */
- if (ch & BRK_ABRT)
- r1 |= BRK_ABRT;
-
ch = readb(&channel->data);
ZSDELAY();
ch &= up->parity_mask;
- if (ZS_IS_CONS(up) && (r1 & BRK_ABRT)) {
- /* Wait for BREAK to deassert to avoid potentially
- * confusing the PROM.
- */
- while (1) {
- ch = readb(&channel->control);
- ZSDELAY();
- if (!(ch & BRK_ABRT))
- break;
- }
- ip22_do_break();
- return;
- }
+ /* Handle the null char got when BREAK is removed. */
+ if (!ch)
+ r1 |= up->tty_break;
/* A real serial line, record the character and status. */
flag = TTY_NORMAL;
up->port.icount.rx++;
- if (r1 & (BRK_ABRT | PAR_ERR | Rx_OVR | CRC_ERR)) {
- if (r1 & BRK_ABRT) {
- r1 &= ~(PAR_ERR | CRC_ERR);
+ if (r1 & (PAR_ERR | Rx_OVR | CRC_ERR | Rx_SYS | Rx_BRK)) {
+ up->tty_break = 0;
+
+ if (r1 & (Rx_SYS | Rx_BRK)) {
up->port.icount.brk++;
- if (uart_handle_break(&up->port))
- goto next_char;
+ if (r1 & Rx_SYS)
+ continue;
+ r1 &= ~(PAR_ERR | CRC_ERR);
}
else if (r1 & PAR_ERR)
up->port.icount.parity++;
@@ -310,30 +301,21 @@ static void ip22zilog_receive_chars(struct uart_ip22zilog_port *up,
if (r1 & Rx_OVR)
up->port.icount.overrun++;
r1 &= up->port.read_status_mask;
- if (r1 & BRK_ABRT)
+ if (r1 & Rx_BRK)
flag = TTY_BREAK;
else if (r1 & PAR_ERR)
flag = TTY_PARITY;
else if (r1 & CRC_ERR)
flag = TTY_FRAME;
}
- if (uart_handle_sysrq_char(&up->port, ch))
- goto next_char;
- if (up->port.ignore_status_mask == 0xff ||
- (r1 & up->port.ignore_status_mask) == 0)
- tty_insert_flip_char(tty, ch, flag);
+ if (uart_handle_sysrq_char(&up->port, ch))
+ continue;
- if (r1 & Rx_OVR)
- tty_insert_flip_char(tty, 0, TTY_OVERRUN);
- next_char:
- ch = readb(&channel->control);
- ZSDELAY();
- if (!(ch & Rx_CH_AV))
- break;
+ if (tty)
+ uart_insert_char(&up->port, r1, Rx_OVR, ch, flag);
}
-
- tty_flip_buffer_push(tty);
+ return tty;
}
static void ip22zilog_status_handle(struct uart_ip22zilog_port *up,
@@ -348,6 +330,15 @@ static void ip22zilog_status_handle(struct uart_ip22zilog_port *up,
ZSDELAY();
ZS_WSYNC(channel);
+ if (up->curregs[R15] & BRKIE) {
+ if ((status & BRK_ABRT) && !(up->prev_status & BRK_ABRT)) {
+ if (uart_handle_break(&up->port))
+ up->tty_break = Rx_SYS;
+ else
+ up->tty_break = Rx_BRK;
+ }
+ }
+
if (ZS_WANTS_MODEM_STATUS(up)) {
if (status & SYNC)
up->port.icount.dsr++;
@@ -356,10 +347,10 @@ static void ip22zilog_status_handle(struct uart_ip22zilog_port *up,
* But it does not tell us which bit has changed, we have to keep
* track of this ourselves.
*/
- if ((status & DCD) ^ up->prev_status)
+ if ((status ^ up->prev_status) ^ DCD)
uart_handle_dcd_change(&up->port,
(status & DCD));
- if ((status & CTS) ^ up->prev_status)
+ if ((status ^ up->prev_status) ^ CTS)
uart_handle_cts_change(&up->port,
(status & CTS));
@@ -447,19 +438,21 @@ static irqreturn_t ip22zilog_interrupt(int irq, void *dev_id)
while (up) {
struct zilog_channel *channel
= ZILOG_CHANNEL_FROM_PORT(&up->port);
+ struct tty_struct *tty;
unsigned char r3;
spin_lock(&up->port.lock);
r3 = read_zsreg(channel, R3);
/* Channel A */
+ tty = NULL;
if (r3 & (CHAEXT | CHATxIP | CHARxIP)) {
writeb(RES_H_IUS, &channel->control);
ZSDELAY();
ZS_WSYNC(channel);
if (r3 & CHARxIP)
- ip22zilog_receive_chars(up, channel);
+ tty = ip22zilog_receive_chars(up, channel);
if (r3 & CHAEXT)
ip22zilog_status_handle(up, channel);
if (r3 & CHATxIP)
@@ -467,18 +460,22 @@ static irqreturn_t ip22zilog_interrupt(int irq, void *dev_id)
}
spin_unlock(&up->port.lock);
+ if (tty)
+ tty_flip_buffer_push(tty);
+
/* Channel B */
up = up->next;
channel = ZILOG_CHANNEL_FROM_PORT(&up->port);
spin_lock(&up->port.lock);
+ tty = NULL;
if (r3 & (CHBEXT | CHBTxIP | CHBRxIP)) {
writeb(RES_H_IUS, &channel->control);
ZSDELAY();
ZS_WSYNC(channel);
if (r3 & CHBRxIP)
- ip22zilog_receive_chars(up, channel);
+ tty = ip22zilog_receive_chars(up, channel);
if (r3 & CHBEXT)
ip22zilog_status_handle(up, channel);
if (r3 & CHBTxIP)
@@ -486,6 +483,9 @@ static irqreturn_t ip22zilog_interrupt(int irq, void *dev_id)
}
spin_unlock(&up->port.lock);
+ if (tty)
+ tty_flip_buffer_push(tty);
+
up = up->next;
}
@@ -681,11 +681,46 @@ static void ip22zilog_break_ctl(struct uart_port *port, int break_state)
spin_unlock_irqrestore(&port->lock, flags);
}
+static void __ip22zilog_reset(struct uart_ip22zilog_port *up)
+{
+ struct zilog_channel *channel;
+ int i;
+
+ if (up->flags & IP22ZILOG_FLAG_RESET_DONE)
+ return;
+
+ /* Let pending transmits finish. */
+ channel = ZILOG_CHANNEL_FROM_PORT(&up->port);
+ for (i = 0; i < 1000; i++) {
+ unsigned char stat = read_zsreg(channel, R1);
+ if (stat & ALL_SNT)
+ break;
+ udelay(100);
+ }
+
+ if (!ZS_IS_CHANNEL_A(up)) {
+ up++;
+ channel = ZILOG_CHANNEL_FROM_PORT(&up->port);
+ }
+ write_zsreg(channel, R9, FHWRES);
+ ZSDELAY_LONG();
+ (void) read_zsreg(channel, R0);
+
+ up->flags |= IP22ZILOG_FLAG_RESET_DONE;
+ up->next->flags |= IP22ZILOG_FLAG_RESET_DONE;
+}
+
static void __ip22zilog_startup(struct uart_ip22zilog_port *up)
{
struct zilog_channel *channel;
channel = ZILOG_CHANNEL_FROM_PORT(&up->port);
+
+ __ip22zilog_reset(up);
+
+ __load_zsregs(channel, up->curregs);
+ /* set master interrupt enable */
+ write_zsreg(channel, R9, up->curregs[R9]);
up->prev_status = readb(&channel->control);
/* Enable receiver and transmitter. */
@@ -859,8 +894,6 @@ ip22zilog_set_termios(struct uart_port *port, struct ktermios *termios,
else
up->flags &= ~IP22ZILOG_FLAG_MODEM_STATUS;
- up->cflag = termios->c_cflag;
-
ip22zilog_maybe_update_regs(up, ZILOG_CHANNEL_FROM_PORT(port));
uart_update_timeout(port, termios->c_cflag, baud);
@@ -992,74 +1025,29 @@ ip22zilog_console_write(struct console *con, const char *s, unsigned int count)
spin_unlock_irqrestore(&up->port.lock, flags);
}
-void
-ip22serial_console_termios(struct console *con, char *options)
-{
- int baud = 9600, bits = 8, cflag;
- int parity = 'n';
- int flow = 'n';
-
- if (options)
- uart_parse_options(options, &baud, &parity, &bits, &flow);
-
- cflag = CREAD | HUPCL | CLOCAL;
-
- switch (baud) {
- case 150: cflag |= B150; break;
- case 300: cflag |= B300; break;
- case 600: cflag |= B600; break;
- case 1200: cflag |= B1200; break;
- case 2400: cflag |= B2400; break;
- case 4800: cflag |= B4800; break;
- case 9600: cflag |= B9600; break;
- case 19200: cflag |= B19200; break;
- case 38400: cflag |= B38400; break;
- default: baud = 9600; cflag |= B9600; break;
- }
-
- con->cflag = cflag | CS8; /* 8N1 */
-
- uart_update_timeout(&ip22zilog_port_table[con->index].port, cflag, baud);
-}
-
static int __init ip22zilog_console_setup(struct console *con, char *options)
{
struct uart_ip22zilog_port *up = &ip22zilog_port_table[con->index];
unsigned long flags;
- int baud, brg;
-
- printk("Console: ttyS%d (IP22-Zilog)\n", con->index);
+ int baud = 9600, bits = 8;
+ int parity = 'n';
+ int flow = 'n';
- /* Get firmware console settings. */
- ip22serial_console_termios(con, options);
+ up->flags |= IP22ZILOG_FLAG_IS_CONS;
- /* Firmware console speed is limited to 150-->38400 baud so
- * this hackish cflag thing is OK.
- */
- switch (con->cflag & CBAUD) {
- case B150: baud = 150; break;
- case B300: baud = 300; break;
- case B600: baud = 600; break;
- case B1200: baud = 1200; break;
- case B2400: baud = 2400; break;
- case B4800: baud = 4800; break;
- default: case B9600: baud = 9600; break;
- case B19200: baud = 19200; break;
- case B38400: baud = 38400; break;
- };
-
- brg = BPS_TO_BRG(baud, ZS_CLOCK / ZS_CLOCK_DIVISOR);
+ printk(KERN_INFO "Console: ttyS%d (IP22-Zilog)\n", con->index);
spin_lock_irqsave(&up->port.lock, flags);
- up->curregs[R15] = BRKIE;
- ip22zilog_convert_to_zs(up, con->cflag, 0, brg);
+ up->curregs[R15] |= BRKIE;
__ip22zilog_startup(up);
spin_unlock_irqrestore(&up->port.lock, flags);
- return 0;
+ if (options)
+ uart_parse_options(options, &baud, &parity, &bits, &flow);
+ return uart_set_options(&up->port, con, baud, parity, bits, flow);
}
static struct uart_driver ip22zilog_reg;
@@ -1140,25 +1128,10 @@ static void __init ip22zilog_prepare(void)
up[(chip * 2) + 1].port.line = (chip * 2) + 1;
up[(chip * 2) + 1].flags |= IP22ZILOG_FLAG_IS_CHANNEL_A;
}
-}
-
-static void __init ip22zilog_init_hw(void)
-{
- int i;
-
- for (i = 0; i < NUM_CHANNELS; i++) {
- struct uart_ip22zilog_port *up = &ip22zilog_port_table[i];
- struct zilog_channel *channel = ZILOG_CHANNEL_FROM_PORT(&up->port);
- unsigned long flags;
- int baud, brg;
- spin_lock_irqsave(&up->port.lock, flags);
-
- if (ZS_IS_CHANNEL_A(up)) {
- write_zsreg(channel, R9, FHWRES);
- ZSDELAY_LONG();
- (void) read_zsreg(channel, R0);
- }
+ for (channel = 0; channel < NUM_CHANNELS; channel++) {
+ struct uart_ip22zilog_port *up = &ip22zilog_port_table[channel];
+ int brg;
/* Normal serial TTY. */
up->parity_mask = 0xff;
@@ -1169,16 +1142,10 @@ static void __init ip22zilog_init_hw(void)
up->curregs[R9] = NV | MIE;
up->curregs[R10] = NRZ;
up->curregs[R11] = TCBR | RCBR;
- baud = 9600;
- brg = BPS_TO_BRG(baud, ZS_CLOCK / ZS_CLOCK_DIVISOR);
+ brg = BPS_TO_BRG(9600, ZS_CLOCK / ZS_CLOCK_DIVISOR);
up->curregs[R12] = (brg & 0xff);
up->curregs[R13] = (brg >> 8) & 0xff;
up->curregs[R14] = BRENAB;
- __load_zsregs(channel, up->curregs);
- /* set master interrupt enable */
- write_zsreg(channel, R9, up->curregs[R9]);
-
- spin_unlock_irqrestore(&up->port.lock, flags);
}
}
@@ -1195,8 +1162,6 @@ static int __init ip22zilog_ports_init(void)
panic("IP22-Zilog: Unable to register zs interrupt handler.\n");
}
- ip22zilog_init_hw();
-
ret = uart_register_driver(&ip22zilog_reg);
if (ret == 0) {
int i;
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index 6a5203f..9963f81 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -437,7 +437,7 @@ uart_handle_sysrq_char(struct uart_port *port, unsigned int ch)
#ifdef SUPPORT_SYSRQ
if (port->sysrq) {
if (ch && time_before(jiffies, port->sysrq)) {
- handle_sysrq(ch, port->info->tty);
+ handle_sysrq(ch, port->info ? port->info->tty : NULL);
port->sysrq = 0;
return 1;
}
--
1.4.4.4
next reply other threads:[~2007-11-25 2:10 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-11-25 2:10 Thomas Bogendoerfer [this message]
[not found] <1570038211.167595.1414613146892.JavaMail.yahoo@jws10056.mail.ne1.yahoo.com>
[not found] ` <1835234304.171617.1414613165674.JavaMail.yahoo@jws10089.mail.ne1.yahoo.com>
[not found] ` <1938862685.172387.1414613200459.JavaMail.yahoo@jws100180.mail.ne1.yahoo.com>
[not found] ` <705402329.170339.1414613213653.JavaMail.yahoo@jws10087.mail.ne1.yahoo.com>
[not found] ` <760168749.169371.1414613227586.JavaMail.yahoo@jws10082.mail.ne1.yahoo.com>
[not found] ` <1233923671.167957.1414613439879.JavaMail.yahoo@jws10091.mail.ne1.yahoo.com>
[not found] ` <925985882.172122.1414613520734.JavaMail.yahoo@jws100207.mail.ne1.yahoo.com>
[not found] ` <1216694778.172990.1414613570775.JavaMail.yahoo@jws100152.mail.ne1.yahoo.com>
[not found] ` <1213035306.169838.1414613612716.JavaMail.yahoo@jws10097.mail.ne1.yahoo.com>
[not found] ` <2058591563.172973.1414613668636.JavaMail.yahoo@jws10089.mail.ne1.yahoo.com>
[not found] ` <1202030640.175493 .1414613712352.JavaMail.yahoo@jws10036.mail.ne1.yahoo.com>
[not found] ` <1111049042.175610.1414613739099.JavaMail.yahoo@jws100165.mail.ne1.yahoo.com>
[not found] ` <574125160.175950.1414613784216.JavaMail.yahoo@jws100158.mail.ne1.yahoo.com>
[not found] ` <1726966600.175552.1414613846198.JavaMail.yahoo@jws100190.mail.ne1.yahoo.com>
[not found] ` <976499752.219775.1414613888129.JavaMail.yahoo@jws100101.mail.ne1.yahoo.com>
[not found] ` <1400960529.171566.1414613936238.JavaMail.yahoo@jws10059.mail.ne1.yahoo.com>
[not found] ` <1333619289.175040.1414613999304.JavaMail.yahoo@jws100196.mail.ne1.yahoo.com>
[not found] ` <1038759122.176173.1414614054070.JavaMail.yahoo@jws100138.mail.ne1.yahoo.com>
[not found] ` <1109995533.176150.1414614101940.JavaMail.yahoo@jws100140.mail.ne1.yahoo.com>
[not found] ` <809474730.174920.1414614143971.JavaMail.yahoo@jws100154.mail.ne1.yahoo.com>
[not found] ` <1234226428.170349.1414614189490.JavaMail .yahoo@jws10056.mail.ne1.yahoo.com>
[not found] ` <1122464611.177103.1414614228916.JavaMail.yahoo@jws100161.mail.ne1.yahoo.com>
[not found] ` <1350859260.174219.1414614279095.JavaMail.yahoo@jws100176.mail.ne1.yahoo.com>
[not found] ` <1730751880.171557.1414614322033.JavaMail.yahoo@jws10060.mail.ne1.yahoo.com>
[not found] ` <642429550.177328.1414614367628.JavaMail.yahoo@jws100165.mail.ne1.yahoo.com>
[not found] ` <1400780243.20511.1414614418178.JavaMail.yahoo@jws100162.mail.ne1.yahoo.com>
[not found] ` <2025652090.173204.1414614462119.JavaMail.yahoo@jws10087.mail.ne1.yahoo.com>
[not found] ` <859211720.180077.1414614521867.JavaMail.yahoo@jws100147.mail.ne1.yahoo.com>
[not found] ` <258705675.173585.1414614563057.JavaMail.yahoo@jws10078.mail.ne1.yahoo.com>
[not found] ` <1773234186.173687.1414614613736.JavaMail.yahoo@jws10078.mail.ne1.yahoo.com>
[not found] ` <1132079010.173033.1414614645153.JavaMail.yahoo@jws10066.mail.ne1.ya hoo.com>
[not found] ` <1972302405.176488.1414614708676.JavaMail.yahoo@jws100166.mail.ne1.yahoo.com>
[not found] ` <1713123000.176308.1414614771694.JavaMail.yahoo@jws10045.mail.ne1.yahoo.com>
[not found] ` <299800233.173413.1414614817575.JavaMail.yahoo@jws10066.mail.ne1.yahoo.com>
[not found] ` <494469968.179875.1414614903152.JavaMail.yahoo@jws100144.mail.ne1.yahoo.com>
[not found] ` <2136945987.171995.1414614942776.JavaMail.yahoo@jws10091.mail.ne1.yahoo.com>
[not found] ` <257674219.177708.1414615022592.JavaMail.yahoo@jws100181.mail.ne1.yahoo.com>
[not found] ` <716927833.181664.1414615075308.JavaMail.yahoo@jws100145.mail.ne1.yahoo.com>
[not found] ` <874940984.178797.1414615132802.JavaMail.yahoo@jws100157.mail.ne1.yahoo.com>
[not found] ` <1283488887.176736.1414615187657.JavaMail.yahoo@jws100183.mail.ne1.yahoo.com>
[not found] ` <777665713.175887.1414615236293.JavaMail.yahoo@jws10083.mail.ne1.yahoo.com>
[not found] ` <585395776.176325.1 414615298260.JavaMail.yahoo@jws10033.mail.ne1.yahoo.com>
[not found] ` <178352191.221832.1414615355071.JavaMail.yahoo@jws100104.mail.ne1.yahoo.com>
[not found] ` <108454213.176606.1414615522058.JavaMail.yahoo@jws10053.mail.ne1.yahoo.com>
[not found] ` <1617229176.177502.1414615563724.JavaMail.yahoo@jws10030.mail.ne1.yahoo.com>
[not found] ` <324334617.178254.1414615625247.JavaMail.yahoo@jws10089.mail.ne1.yahoo.com>
[not found] ` <567135865.82376.1414615664442.JavaMail.yahoo@jws100136.mail.ne1.yahoo.com>
[not found] ` <764758300.179669.1414615711821.JavaMail.yahoo@jws100107.mail.ne1.yahoo.com>
[not found] ` <1072855470.183388.1414615775798.JavaMail.yahoo@jws100147.mail.ne1.yahoo.com>
[not found] ` <2134283632.173314.1414615831322.JavaMail.yahoo@jws10094.mail.ne1.yahoo.com>
[not found] ` <1454491902.178612.1414615875076.JavaMail.yahoo@jws100209.mail.ne1.yahoo.com>
[not found] ` <1881200547.147301.1414958000634.JavaMail.yahoo@jws100209.mail.ne1.yahoo.com>
2014-11-02 19:54 ` (unknown) MRS GRACE MANDA
-- strict thread matches above, loose matches on Subject: below --
2014-07-09 17:49 (unknown), Sebastian Andrzej Siewior
2013-07-31 6:26 (unknown), Yoshinori Otani
2012-11-12 13:21 (unknown), Jayne Montgomery
2012-11-12 12:49 (unknown), Jayne Montgomery
2012-11-12 10:52 (unknown), Jayne Montgomery
2012-04-12 11:21 (unknown), monicaaluke01@gmail.com
2012-03-04 17:59 (unknown), Matthieu CASTET
2012-02-25 14:29 (unknown), Grieger, Anne
2011-11-18 4:54 (unknown), Robbin Setzer
2011-10-09 20:56 (unknown), MONEY GRAM CUSTOMER CARE
2011-04-14 7:15 (unknown) pradeep Annavarapu
2011-03-03 5:39 (unknown) pradeep Annavarapu
2011-03-01 23:48 (unknown), Mr. henry
2011-03-01 23:47 (unknown), Mr. henry
2010-11-19 4:38 (unknown) Mayank Rana
2007-04-30 22:06 (unknown) Corey Minyard
[not found] <000601c7708e$f36a37c0$0200a8c0@7950gx2>
2007-03-27 16:42 ` (unknown), Chris Mawer
2006-10-15 14:20 (unknown) upcajxhkb
2006-08-07 2:46 (unknown), colet aeneas
2006-06-16 17:54 (unknown) kueth
2006-05-01 7:56 (unknown) bec
2006-04-30 23:40 (unknown) jungjackson
2006-03-11 21:02 (unknown) lwvxfb
2005-11-17 18:48 (unknown) Stuart MacDonald
2005-07-27 16:19 (unknown) drlim
2005-07-23 4:50 (unknown) Mr.Derrick Tanner.
2005-06-21 11:48 (unknown) pliskie
2005-06-16 12:14 (unknown) LeslieGolden
2005-06-11 2:00 (unknown) dtasman
2005-06-10 2:30 (unknown) bewails
2005-05-16 8:11 (unknown) ucmjfspdc
2005-05-08 3:52 (unknown) xiytw
2005-04-22 2:00 (unknown) vyidqsw
2004-10-09 22:23 (unknown) zzz
2004-09-02 14:27 (unknown), Larry
2004-08-24 6:05 (unknown) Francisco M. Marzoa Alonso
2004-08-14 6:38 (unknown) sky
2004-08-11 1:10 (unknown) sky
2004-08-07 4:32 (unknown) sky
2004-08-07 1:05 (unknown) kkkkkkk
2004-08-06 1:02 (unknown) lowinterrest
2004-08-01 10:30 (unknown) sky
2004-03-16 22:48 (unknown), Kumar Gala
2004-03-15 22:13 (unknown), Brice Blount
2003-12-21 13:39 (unknown) "Grigorii Rubtsov"
2003-12-18 7:37 (unknown) achen1
2003-11-18 13:26 (unknown), Michael Kohne
2002-08-27 1:48 (unknown) Alex Pavloff
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20071125021001.A7B8AC222A@solo.franken.de \
--to=tsbogend@alpha.franken.de \
--cc=akpm@linux-foundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@linux-mips.org \
--cc=linux-serial@vger.kernel.org \
--cc=ralf@linux-mips.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).