* [PATCH 00/36] ARM: samsung platform cleanup
@ 2019-10-10 20:28 Arnd Bergmann
2019-10-10 20:28 ` Arnd Bergmann
` (2 more replies)
0 siblings, 3 replies; 18+ messages in thread
From: Arnd Bergmann @ 2019-10-10 20:28 UTC (permalink / raw)
To: Kukjin Kim, Krzysztof Kozlowski
Cc: linux-hwmon, linux-pwm, linux-fbdev, linux-samsung-soc,
Arnd Bergmann, linux-pm, patches, linux-usb, linux-mmc,
linux-kernel, dri-devel, linux-clk, alsa-devel, linux-leds,
linux-serial, linux-input, linux-spi, linux-stm32,
linux-arm-kernel
I've spent some time looking at the remaining ARMv4/ARMv5 platforms
that are not part of ARCH_MULTIPLATFORM, and tried to get them closer
to that. Here is what came out of that for the samsung platforms:
* Exynos and s5pv210 are made independent of plat-samsung
* device drivers stop using mach/*.h headers for s3c24xx
(and other platforms not in this series)
* s3c24xx and s3c64xx get merged into mach-s3c, removing
the need for plat-samsung (I have other patches for the
remaining plat-* directories)
* mach/io.h gets cleaned up to only be needed for BAST
PC104 mode (looking for ideas to proceed)
* mach/irqs.h remains for now, this still needs to be converted
to sparse IRQs.
Some bits are a little ugly, but overall I think this a big
improvement.
The contents are available for testing in
git://kernel.org:/pub/scm/linux/kernel/git/arnd/playground.git s3c-multiplatform
Given the overall size of the series I expect that there will
be bugs, so at this points I'm looking for reviews, acks and
testing from anyone who still has the hardware, in particular
s3c24xx, but also the other samsung platforms I'm touching.
Arnd
Arnd Bergmann (36):
ARM: samsung: make S3C24XX_MISCCR access indirect
ARM: s3c: simplify mach/io.h
usb: gadget: s3c: use platform resources
usb: gadget: s3c-hsudc: remove platform header dependency
ARM: samsung: make pm-debug platform independent
ARM: samsung: move CONFIG_DEBUG_S3C_UART to Kconfig.debug
ARM: exynos: use private samsung_cpu_id copy
ARM: exynos: stop selecting PLAT_SAMSUNG
ARM: samsung: move pm check code to drivers/soc
ARM: s5pv210: use private pm save/restore
ARM: s5pv210: split from plat-samsung
ARM: s3c64xx: remove mach/hardware.h
ARM: s3c: move regs-spi.h into spi driver
ARM: s3c: move irqchip driver back into platform
ARM: s3c: adc: move header to linux/soc/samsung
ARM: s3c: move spi fiq handler into platform
ARM: s3c: h1940-audio: turn into platform driver
ARM: s3c: gta02-audio: turn into platform driver
ARM: s3c: rx1950: turn into platform driver
ASoC: samsung: s3c2412-i2s: avoid hardcoded S3C2410_PA_IIS
ARM: s3c: move iis pinctrl config into boards
ARM: s3c: leds: move setpull() calls into board files
ARM: s3c: move s3cmci pinctrl handling into board files
ARM: s3c: include mach/irqs.h where needed
ARM: s3c: spi: avoid hardcoding fiq number in driver
ARM: s3c: bast: avoid irq_desc array usage
ARM: s3c: fix mmc gpio lookup tables
fbdev: s3c2410fb: remove mach header dependency
ARM: s3c: cpufreq: split out registers
ARM: s3c: remove cpufreq header dependencies
ARM: s3c: cpufreq: use global s3c2412_cpufreq_setrefresh
ARM: s3c: iotiming: make functions static
ARM: s3c: move low-level clk reg access into platform code
ARM: s3c: stop including mach/hardware.h from mach/io.h
ARM: s3c: move into a common directory
ARM: s3c: make headers local if possible
MAINTAINERS | 16 +-
arch/arm/Kconfig | 5 +-
arch/arm/Kconfig.debug | 18 +-
arch/arm/Makefile | 7 +-
arch/arm/mach-exynos/Makefile | 4 -
arch/arm/mach-exynos/common.h | 6 +-
arch/arm/mach-exynos/exynos.c | 19 +-
arch/arm/mach-exynos/include/mach/map.h | 18 --
arch/arm/mach-exynos/platsmp.c | 4 +-
arch/arm/mach-exynos/pm.c | 8 +-
arch/arm/{plat-samsung => mach-s3c}/Kconfig | 62 +----
.../Kconfig => mach-s3c/Kconfig.s3c24xx} | 0
.../Kconfig => mach-s3c/Kconfig.s3c64xx} | 0
arch/arm/{plat-samsung => mach-s3c}/Makefile | 15 +-
.../{mach-s3c24xx => mach-s3c}/Makefile.boot | 0
.../Makefile => mach-s3c/Makefile.s3c24xx} | 15 +-
.../Makefile => mach-s3c/Makefile.s3c64xx} | 14 +-
.../include/plat => mach-s3c}/adc-core.h | 0
arch/arm/{plat-samsung => mach-s3c}/adc.c | 4 +-
arch/arm/{mach-s3c24xx => mach-s3c}/anubis.h | 0
.../arm/{mach-s3c64xx => mach-s3c}/ata-core.h | 0
.../{mach-s3c64xx => mach-s3c}/backlight.h | 0
.../arm/{mach-s3c24xx => mach-s3c}/bast-ide.c | 3 +-
.../arm/{mach-s3c24xx => mach-s3c}/bast-irq.c | 8 +-
arch/arm/{mach-s3c24xx => mach-s3c}/bast.h | 0
.../{mach-s3c24xx => mach-s3c}/common-smdk.c | 17 +-
.../{mach-s3c24xx => mach-s3c}/common-smdk.h | 0
arch/arm/{plat-samsung => mach-s3c}/cpu.c | 21 +-
.../include/plat => mach-s3c}/cpu.h | 11 -
.../cpufreq-utils.c | 38 +++-
arch/arm/{mach-s3c64xx => mach-s3c}/cpuidle.c | 4 +-
.../arm/{mach-s3c64xx => mach-s3c}/crag6410.h | 2 +-
.../{mach-s3c64xx => mach-s3c}/dev-audio.c | 9 +-
.../dev-backlight.c | 4 +-
.../dev-uart-s3c64xx.c} | 5 +-
.../arm/{plat-samsung => mach-s3c}/dev-uart.c | 2 +-
arch/arm/{plat-samsung => mach-s3c}/devs.c | 56 +++--
.../include/plat => mach-s3c}/devs.h | 0
.../mach/dma.h => mach-s3c/dma-s3c24xx.h} | 0
.../mach/dma.h => mach-s3c/dma-s3c64xx.h} | 0
arch/arm/mach-s3c/dma.h | 7 +
arch/arm/{mach-s3c24xx => mach-s3c}/fb-core.h | 0
.../include/plat => mach-s3c}/fb.h | 0
.../plat => mach-s3c}/gpio-cfg-helpers.h | 0
.../include/plat => mach-s3c}/gpio-cfg.h | 0
.../include/plat => mach-s3c}/gpio-core.h | 2 +-
.../gpio-samsung-s3c24xx.h} | 2 +
.../gpio-samsung-s3c64xx.h} | 0
.../{plat-samsung => mach-s3c}/gpio-samsung.c | 18 +-
arch/arm/mach-s3c/gpio-samsung.h | 7 +
arch/arm/{mach-s3c24xx => mach-s3c}/gta02.h | 2 +-
.../h1940-bluetooth.c | 7 +-
arch/arm/{mach-s3c24xx => mach-s3c}/h1940.h | 0
.../include/mach => mach-s3c}/hardware.h | 7 -
.../include/plat => mach-s3c}/iic-core.h | 0
arch/arm/mach-s3c/include/mach/io.h | 50 +++++
.../include/mach/irqs-s3c24xx.h} | 0
.../include/mach/irqs-s3c64xx.h} | 0
arch/arm/mach-s3c/include/mach/irqs.h | 7 +
.../plat => mach-s3c/include/mach}/map-base.h | 0
arch/arm/{plat-samsung => mach-s3c}/init.c | 4 +-
.../iotiming-s3c2410.c | 12 +-
.../iotiming-s3c2412.c | 6 +-
.../irq-pm.c => mach-s3c/irq-pm-s3c24xx.c} | 16 +-
.../irq-pm.c => mach-s3c/irq-pm-s3c64xx.c} | 8 +-
arch/arm/mach-s3c/irq-s3c24xx-fiq-exports.c | 9 +
.../arm/mach-s3c/irq-s3c24xx-fiq.S | 10 +-
.../arm/mach-s3c}/irq-s3c24xx.c | 23 +-
.../arm/{mach-s3c64xx => mach-s3c}/irq-uart.h | 0
.../include/plat => mach-s3c}/keypad.h | 0
.../mach-amlm5900.c | 37 ++-
.../{mach-s3c24xx => mach-s3c}/mach-anubis.c | 14 +-
.../{mach-s3c64xx => mach-s3c}/mach-anw6410.c | 17 +-
.../mach-at2440evb.c | 28 ++-
.../{mach-s3c24xx => mach-s3c}/mach-bast.c | 22 +-
.../mach-crag6410-module.c | 2 +-
.../mach-crag6410.c | 27 ++-
.../{mach-s3c24xx => mach-s3c}/mach-gta02.c | 57 ++++-
.../{mach-s3c24xx => mach-s3c}/mach-h1940.c | 65 ++++--
.../arm/{mach-s3c64xx => mach-s3c}/mach-hmt.c | 15 +-
.../{mach-s3c24xx => mach-s3c}/mach-jive.c | 27 ++-
.../mach-mini2440.c | 48 ++--
.../mach-mini6410.c | 22 +-
.../arm/{mach-s3c24xx => mach-s3c}/mach-n30.c | 40 +++-
.../arm/{mach-s3c64xx => mach-s3c}/mach-ncp.c | 13 +-
.../mach-nexcoder.c | 20 +-
.../mach-osiris-dvs.c | 4 +-
.../{mach-s3c24xx => mach-s3c}/mach-osiris.c | 22 +-
.../{mach-s3c24xx => mach-s3c}/mach-otom.c | 17 +-
.../{mach-s3c24xx => mach-s3c}/mach-qt2410.c | 37 ++-
.../mach-real6410.c | 18 +-
.../{mach-s3c24xx => mach-s3c}/mach-rx1950.c | 57 +++--
.../{mach-s3c24xx => mach-s3c}/mach-rx3715.c | 26 ++-
.../mach-s3c2416-dt.c | 8 +-
.../mach-s3c64xx-dt.c | 6 +-
.../{mach-s3c64xx => mach-s3c}/mach-smartq.c | 18 +-
.../{mach-s3c64xx => mach-s3c}/mach-smartq.h | 0
.../{mach-s3c64xx => mach-s3c}/mach-smartq5.c | 18 +-
.../{mach-s3c64xx => mach-s3c}/mach-smartq7.c | 18 +-
.../mach-smdk2410.c | 14 +-
.../mach-smdk2413.c | 21 +-
.../mach-smdk2416.c | 23 +-
.../mach-smdk2440.c | 25 ++-
.../mach-smdk2443.c | 14 +-
.../mach-smdk6400.c | 13 +-
.../mach-smdk6410.c | 23 +-
.../mach-tct_hammer.c | 24 +-
.../{mach-s3c24xx => mach-s3c}/mach-vr1000.c | 20 +-
.../{mach-s3c24xx => mach-s3c}/mach-vstms.c | 20 +-
.../include/plat => mach-s3c}/map-s3c.h | 12 +-
.../mach/map.h => mach-s3c/map-s3c24xx.h} | 6 +-
.../mach/map.h => mach-s3c/map-s3c64xx.h} | 4 +-
.../include/plat => mach-s3c}/map-s5p.h | 4 +-
arch/arm/mach-s3c/map.h | 7 +
.../{mach-s3c24xx => mach-s3c}/nand-core.h | 0
.../{mach-s3c64xx => mach-s3c}/onenand-core.h | 0
arch/arm/{mach-s3c24xx => mach-s3c}/osiris.h | 0
arch/arm/{mach-s3c24xx => mach-s3c}/otom.h | 0
arch/arm/{mach-s3c64xx => mach-s3c}/pl080.c | 4 +-
.../{plat-samsung => mach-s3c}/platformdata.c | 4 +-
.../{mach-s3c24xx => mach-s3c}/pll-s3c2410.c | 4 +-
.../pll-s3c2440-12000000.c | 4 +-
.../pll-s3c2440-16934400.c | 4 +-
.../{plat-samsung => mach-s3c}/pm-common.c | 2 +-
arch/arm/mach-s3c/pm-common.h | 40 ++++
.../pm-core.h => mach-s3c/pm-core-s3c24xx.h} | 8 +-
.../pm-core.h => mach-s3c/pm-core-s3c64xx.h} | 50 +----
arch/arm/mach-s3c/pm-core.h | 7 +
arch/arm/{plat-samsung => mach-s3c}/pm-gpio.c | 6 +-
.../arm/{mach-s3c24xx => mach-s3c}/pm-h1940.S | 5 +-
.../{mach-s3c24xx => mach-s3c}/pm-s3c2410.c | 11 +-
.../{mach-s3c24xx => mach-s3c}/pm-s3c2412.c | 11 +-
.../{mach-s3c24xx => mach-s3c}/pm-s3c2416.c | 6 +-
.../pm.c => mach-s3c/pm-s3c24xx.c} | 12 +-
.../pm.c => mach-s3c/pm-s3c64xx.c} | 66 +++++-
arch/arm/{plat-samsung => mach-s3c}/pm.c | 20 +-
.../include/plat => mach-s3c}/pm.h | 2 +-
.../include/plat => mach-s3c}/pwm-core.h | 0
.../include/plat => mach-s3c}/regs-adc.h | 0
.../regs-clock-s3c24xx.h} | 2 +
.../regs-clock-s3c64xx.h} | 0
arch/arm/mach-s3c/regs-clock.h | 7 +
.../arm/{mach-s3c24xx => mach-s3c}/regs-dsc.h | 0
.../regs-gpio-memport.h | 0
.../regs-gpio-s3c24xx.h} | 2 +
.../regs-gpio-s3c64xx.h} | 0
arch/arm/mach-s3c/regs-gpio.h | 7 +
.../regs-irq-s3c24xx.h} | 2 +
.../regs-irq-s3c64xx.h} | 0
arch/arm/mach-s3c/regs-irq.h | 7 +
.../include/plat => mach-s3c}/regs-irqtype.h | 0
.../arm/{mach-s3c24xx => mach-s3c}/regs-mem.h | 2 +
.../{mach-s3c64xx => mach-s3c}/regs-modem.h | 0
.../mach => mach-s3c}/regs-s3c2443-clock.h | 50 +++++
.../{mach-s3c64xx => mach-s3c}/regs-srom.h | 0
.../arm/{mach-s3c64xx => mach-s3c}/regs-sys.h | 0
.../regs-syscon-power.h | 0
.../regs-usb-hsotg-phy.h | 0
.../include/mach => mach-s3c}/rtc-core.h | 0
arch/arm/{mach-s3c24xx => mach-s3c}/s3c2410.c | 21 +-
.../s3c2412-power.h | 0
arch/arm/{mach-s3c24xx => mach-s3c}/s3c2412.c | 16 +-
.../include/mach => mach-s3c}/s3c2412.h | 2 +
arch/arm/{mach-s3c24xx => mach-s3c}/s3c2416.c | 28 +--
arch/arm/{mach-s3c24xx => mach-s3c}/s3c2440.c | 17 +-
arch/arm/{mach-s3c24xx => mach-s3c}/s3c2442.c | 17 +-
arch/arm/{mach-s3c24xx => mach-s3c}/s3c2443.c | 21 +-
arch/arm/{mach-s3c24xx => mach-s3c}/s3c244x.c | 16 +-
.../common.c => mach-s3c/s3c24xx.c} | 21 +-
.../common.h => mach-s3c/s3c24xx.h} | 1 +
arch/arm/{mach-s3c64xx => mach-s3c}/s3c6400.c | 14 +-
arch/arm/{mach-s3c64xx => mach-s3c}/s3c6410.c | 17 +-
.../common.c => mach-s3c/s3c64xx.c} | 24 +-
.../common.h => mach-s3c/s3c64xx.h} | 0
.../include/plat => mach-s3c}/samsung-time.h | 0
.../include/plat => mach-s3c}/sdhci.h | 2 +-
.../{mach-s3c24xx => mach-s3c}/setup-camif.c | 4 +-
.../setup-fb-24bpp.c | 6 +-
.../{mach-s3c24xx => mach-s3c}/setup-i2c.c | 7 +-
.../{mach-s3c64xx => mach-s3c}/setup-i2c0.c | 4 +-
.../{mach-s3c64xx => mach-s3c}/setup-i2c1.c | 4 +-
.../{mach-s3c64xx => mach-s3c}/setup-ide.c | 8 +-
.../{mach-s3c64xx => mach-s3c}/setup-keypad.c | 6 +-
.../setup-sdhci-gpio-s3c24xx.c} | 6 +-
.../setup-sdhci-gpio-s3c64xx.c} | 6 +-
.../setup-spi-s3c24xx.c} | 6 +-
.../setup-spi-s3c64xx.c} | 4 +-
.../arm/{mach-s3c24xx => mach-s3c}/setup-ts.c | 5 +-
.../setup-usb-phy.c | 6 +-
.../{mach-s3c24xx => mach-s3c}/simtec-audio.c | 11 +-
.../{mach-s3c24xx => mach-s3c}/simtec-nor.c | 2 +-
.../{mach-s3c24xx => mach-s3c}/simtec-pm.c | 8 +-
.../{mach-s3c24xx => mach-s3c}/simtec-usb.c | 6 +-
arch/arm/{mach-s3c24xx => mach-s3c}/simtec.h | 0
.../sleep-s3c2410.S | 7 +-
.../sleep-s3c2412.S | 5 +-
.../sleep.S => mach-s3c/sleep-s3c24xx.S} | 7 +-
.../sleep.S => mach-s3c/sleep-s3c64xx.S} | 4 +-
.../arm/{mach-s3c24xx => mach-s3c}/spi-core.h | 0
.../include/plat => mach-s3c}/usb-phy.h | 0
arch/arm/{mach-s3c24xx => mach-s3c}/vr1000.h | 0
.../{plat-samsung => mach-s3c}/wakeup-mask.c | 4 +-
.../include/plat => mach-s3c}/wakeup-mask.h | 0
.../watchdog-reset.c | 0
.../watchdog-reset.h | 0
arch/arm/mach-s3c24xx/include/mach/fb.h | 2 -
arch/arm/mach-s3c24xx/include/mach/io.h | 212 ------------------
arch/arm/mach-s3c64xx/include/mach/hardware.h | 17 --
arch/arm/mach-s5pv210/Kconfig | 1 +
arch/arm/mach-s5pv210/Makefile | 7 -
arch/arm/mach-s5pv210/pm.c | 51 ++++-
arch/arm/mach-s5pv210/regs-clock.h | 2 +-
arch/arm/mach-s5pv210/s5pv210.c | 2 -
drivers/clk/samsung/clk-s3c2410-dclk.c | 10 +-
drivers/cpufreq/s3c2410-cpufreq.c | 10 +-
drivers/cpufreq/s3c2412-cpufreq.c | 44 ++--
drivers/cpufreq/s3c2440-cpufreq.c | 29 ++-
drivers/cpufreq/s3c24xx-cpufreq-debugfs.c | 2 +-
drivers/cpufreq/s3c24xx-cpufreq.c | 14 +-
drivers/hwmon/s3c-hwmon.c | 2 +-
drivers/input/touchscreen/s3c2410_ts.c | 37 ++-
drivers/irqchip/Makefile | 1 -
drivers/leds/leds-s3c24xx.c | 7 -
drivers/mmc/host/Kconfig | 2 +-
drivers/mmc/host/s3cmci.c | 72 ++----
drivers/power/supply/s3c_adc_battery.c | 2 +-
drivers/pwm/Kconfig | 2 +-
drivers/soc/samsung/Kconfig | 48 +++-
drivers/soc/samsung/Makefile | 3 +
.../soc/samsung/s3c-pm-check.c | 2 +-
.../soc/samsung/s3c-pm-debug.c | 26 +--
drivers/spi/Kconfig | 2 +-
drivers/spi/Makefile | 1 -
.../spi/spi-s3c24xx-regs.h | 3 +-
drivers/spi/spi-s3c24xx.c | 28 +--
drivers/tty/serial/Kconfig | 2 +-
drivers/usb/gadget/udc/s3c-hsudc.c | 55 +----
drivers/usb/gadget/udc/s3c2410_udc.c | 31 +--
drivers/usb/gadget/udc/s3c2410_udc.h | 1 +
.../usb/gadget/udc/s3c2410_udc_regs.h | 2 +
.../video/fbdev/s3c2410fb-regs-lcd.h | 28 +--
drivers/video/fbdev/s3c2410fb.c | 16 +-
.../linux/platform_data}/fb-s3c2410.h | 33 ++-
include/linux/platform_data/mmc-s3cmci.h | 2 +
include/linux/platform_data/s3c-hsudc.h | 2 +
.../linux/soc/samsung/s3c-adc.h | 0
.../linux/soc/samsung/s3c-cpu-freq.h | 0
.../linux/soc/samsung/s3c-cpufreq-core.h | 10 +-
.../linux/soc/samsung/s3c-pm.h | 69 +++---
.../linux/spi/s3c24xx-fiq.h | 5 +
include/linux/spi/s3c24xx.h | 2 +-
sound/soc/samsung/Kconfig | 2 +-
sound/soc/samsung/h1940_uda1380.c | 71 ++----
sound/soc/samsung/neo1973_wm8753.c | 85 +++----
sound/soc/samsung/rx1950_uda1380.c | 72 ++----
sound/soc/samsung/s3c-i2s-v2.c | 3 +-
sound/soc/samsung/s3c-i2s-v2.h | 3 +-
sound/soc/samsung/s3c2412-i2s.c | 9 +-
sound/soc/samsung/s3c24xx-i2s.c | 7 -
259 files changed, 1716 insertions(+), 1648 deletions(-)
delete mode 100644 arch/arm/mach-exynos/include/mach/map.h
rename arch/arm/{plat-samsung => mach-s3c}/Kconfig (73%)
rename arch/arm/{mach-s3c24xx/Kconfig => mach-s3c/Kconfig.s3c24xx} (100%)
rename arch/arm/{mach-s3c64xx/Kconfig => mach-s3c/Kconfig.s3c64xx} (100%)
rename arch/arm/{plat-samsung => mach-s3c}/Makefile (67%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/Makefile.boot (100%)
rename arch/arm/{mach-s3c24xx/Makefile => mach-s3c/Makefile.s3c24xx} (86%)
rename arch/arm/{mach-s3c64xx/Makefile => mach-s3c/Makefile.s3c64xx} (83%)
rename arch/arm/{plat-samsung/include/plat => mach-s3c}/adc-core.h (100%)
rename arch/arm/{plat-samsung => mach-s3c}/adc.c (99%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/anubis.h (100%)
rename arch/arm/{mach-s3c64xx => mach-s3c}/ata-core.h (100%)
rename arch/arm/{mach-s3c64xx => mach-s3c}/backlight.h (100%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/bast-ide.c (97%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/bast-irq.c (95%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/bast.h (100%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/common-smdk.c (93%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/common-smdk.h (100%)
rename arch/arm/{plat-samsung => mach-s3c}/cpu.c (62%)
rename arch/arm/{plat-samsung/include/plat => mach-s3c}/cpu.h (91%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/cpufreq-utils.c (70%)
rename arch/arm/{mach-s3c64xx => mach-s3c}/cpuidle.c (96%)
rename arch/arm/{mach-s3c64xx => mach-s3c}/crag6410.h (95%)
rename arch/arm/{mach-s3c64xx => mach-s3c}/dev-audio.c (97%)
rename arch/arm/{mach-s3c64xx => mach-s3c}/dev-backlight.c (98%)
rename arch/arm/{mach-s3c64xx/dev-uart.c => mach-s3c/dev-uart-s3c64xx.c} (95%)
rename arch/arm/{plat-samsung => mach-s3c}/dev-uart.c (97%)
rename arch/arm/{plat-samsung => mach-s3c}/devs.c (96%)
rename arch/arm/{plat-samsung/include/plat => mach-s3c}/devs.h (100%)
rename arch/arm/{mach-s3c24xx/include/mach/dma.h => mach-s3c/dma-s3c24xx.h} (100%)
rename arch/arm/{mach-s3c64xx/include/mach/dma.h => mach-s3c/dma-s3c64xx.h} (100%)
create mode 100644 arch/arm/mach-s3c/dma.h
rename arch/arm/{mach-s3c24xx => mach-s3c}/fb-core.h (100%)
rename arch/arm/{plat-samsung/include/plat => mach-s3c}/fb.h (100%)
rename arch/arm/{plat-samsung/include/plat => mach-s3c}/gpio-cfg-helpers.h (100%)
rename arch/arm/{plat-samsung/include/plat => mach-s3c}/gpio-cfg.h (100%)
rename arch/arm/{plat-samsung/include/plat => mach-s3c}/gpio-core.h (99%)
rename arch/arm/{mach-s3c24xx/include/mach/gpio-samsung.h => mach-s3c/gpio-samsung-s3c24xx.h} (99%)
rename arch/arm/{mach-s3c64xx/include/mach/gpio-samsung.h => mach-s3c/gpio-samsung-s3c64xx.h} (100%)
rename arch/arm/{plat-samsung => mach-s3c}/gpio-samsung.c (99%)
create mode 100644 arch/arm/mach-s3c/gpio-samsung.h
rename arch/arm/{mach-s3c24xx => mach-s3c}/gta02.h (94%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/h1940-bluetooth.c (96%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/h1940.h (100%)
rename arch/arm/{mach-s3c24xx/include/mach => mach-s3c}/hardware.h (76%)
rename arch/arm/{plat-samsung/include/plat => mach-s3c}/iic-core.h (100%)
create mode 100644 arch/arm/mach-s3c/include/mach/io.h
rename arch/arm/{mach-s3c24xx/include/mach/irqs.h => mach-s3c/include/mach/irqs-s3c24xx.h} (100%)
rename arch/arm/{mach-s3c64xx/include/mach/irqs.h => mach-s3c/include/mach/irqs-s3c64xx.h} (100%)
create mode 100644 arch/arm/mach-s3c/include/mach/irqs.h
rename arch/arm/{plat-samsung/include/plat => mach-s3c/include/mach}/map-base.h (100%)
rename arch/arm/{plat-samsung => mach-s3c}/init.c (98%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/iotiming-s3c2410.c (97%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/iotiming-s3c2412.c (98%)
rename arch/arm/{mach-s3c24xx/irq-pm.c => mach-s3c/irq-pm-s3c24xx.c} (93%)
rename arch/arm/{mach-s3c64xx/irq-pm.c => mach-s3c/irq-pm-s3c64xx.c} (97%)
create mode 100644 arch/arm/mach-s3c/irq-s3c24xx-fiq-exports.c
rename drivers/spi/spi-s3c24xx-fiq.S => arch/arm/mach-s3c/irq-s3c24xx-fiq.S (94%)
rename {drivers/irqchip => arch/arm/mach-s3c}/irq-s3c24xx.c (99%)
rename arch/arm/{mach-s3c64xx => mach-s3c}/irq-uart.h (100%)
rename arch/arm/{plat-samsung/include/plat => mach-s3c}/keypad.h (100%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/mach-amlm5900.c (84%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/mach-anubis.c (97%)
rename arch/arm/{mach-s3c64xx => mach-s3c}/mach-anw6410.c (96%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/mach-at2440evb.c (88%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/mach-bast.c (98%)
rename arch/arm/{mach-s3c64xx => mach-s3c}/mach-crag6410-module.c (99%)
rename arch/arm/{mach-s3c64xx => mach-s3c}/mach-crag6410.c (98%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/mach-gta02.c (90%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/mach-h1940.c (92%)
rename arch/arm/{mach-s3c64xx => mach-s3c}/mach-hmt.c (97%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/mach-jive.c (97%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/mach-mini2440.c (93%)
rename arch/arm/{mach-s3c64xx => mach-s3c}/mach-mini6410.c (97%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/mach-n30.c (93%)
rename arch/arm/{mach-s3c64xx => mach-s3c}/mach-ncp.c (92%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/mach-nexcoder.c (92%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/mach-osiris-dvs.c (98%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/mach-osiris.c (97%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/mach-otom.c (89%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/mach-qt2410.c (88%)
rename arch/arm/{mach-s3c64xx => mach-s3c}/mach-real6410.c (97%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/mach-rx1950.c (93%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/mach-rx3715.c (90%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/mach-s3c2416-dt.c (92%)
rename arch/arm/{mach-s3c64xx => mach-s3c}/mach-s3c64xx-dt.c (95%)
rename arch/arm/{mach-s3c64xx => mach-s3c}/mach-smartq.c (97%)
rename arch/arm/{mach-s3c64xx => mach-s3c}/mach-smartq.h (100%)
rename arch/arm/{mach-s3c64xx => mach-s3c}/mach-smartq5.c (93%)
rename arch/arm/{mach-s3c64xx => mach-s3c}/mach-smartq7.c (94%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/mach-smdk2410.c (89%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/mach-smdk2413.c (90%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/mach-smdk2416.c (95%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/mach-smdk2440.c (89%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/mach-smdk2443.c (93%)
rename arch/arm/{mach-s3c64xx => mach-s3c}/mach-smdk6400.c (92%)
rename arch/arm/{mach-s3c64xx => mach-s3c}/mach-smdk6410.c (98%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/mach-tct_hammer.c (82%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/mach-vr1000.c (95%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/mach-vstms.c (90%)
rename arch/arm/{plat-samsung/include/plat => mach-s3c}/map-s3c.h (87%)
rename arch/arm/{mach-s3c24xx/include/mach/map.h => mach-s3c/map-s3c24xx.h} (97%)
rename arch/arm/{mach-s3c64xx/include/mach/map.h => mach-s3c/map-s3c64xx.h} (98%)
rename arch/arm/{plat-samsung/include/plat => mach-s3c}/map-s5p.h (85%)
create mode 100644 arch/arm/mach-s3c/map.h
rename arch/arm/{mach-s3c24xx => mach-s3c}/nand-core.h (100%)
rename arch/arm/{mach-s3c64xx => mach-s3c}/onenand-core.h (100%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/osiris.h (100%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/otom.h (100%)
rename arch/arm/{mach-s3c64xx => mach-s3c}/pl080.c (99%)
rename arch/arm/{plat-samsung => mach-s3c}/platformdata.c (96%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/pll-s3c2410.c (97%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/pll-s3c2440-12000000.c (97%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/pll-s3c2440-16934400.c (98%)
rename arch/arm/{plat-samsung => mach-s3c}/pm-common.c (98%)
create mode 100644 arch/arm/mach-s3c/pm-common.h
rename arch/arm/{mach-s3c24xx/include/mach/pm-core.h => mach-s3c/pm-core-s3c24xx.h} (95%)
rename arch/arm/{mach-s3c64xx/include/mach/pm-core.h => mach-s3c/pm-core-s3c64xx.h} (58%)
create mode 100644 arch/arm/mach-s3c/pm-core.h
rename arch/arm/{plat-samsung => mach-s3c}/pm-gpio.c (99%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/pm-h1940.S (80%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/pm-s3c2410.c (96%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/pm-s3c2412.c (95%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/pm-s3c2416.c (95%)
rename arch/arm/{mach-s3c24xx/pm.c => mach-s3c/pm-s3c24xx.c} (94%)
rename arch/arm/{mach-s3c64xx/pm.c => mach-s3c/pm-s3c64xx.c} (83%)
rename arch/arm/{plat-samsung => mach-s3c}/pm.c (94%)
rename arch/arm/{plat-samsung/include/plat => mach-s3c}/pm.h (98%)
rename arch/arm/{plat-samsung/include/plat => mach-s3c}/pwm-core.h (100%)
rename arch/arm/{plat-samsung/include/plat => mach-s3c}/regs-adc.h (100%)
rename arch/arm/{mach-s3c24xx/include/mach/regs-clock.h => mach-s3c/regs-clock-s3c24xx.h} (99%)
rename arch/arm/{mach-s3c64xx/include/mach/regs-clock.h => mach-s3c/regs-clock-s3c64xx.h} (100%)
create mode 100644 arch/arm/mach-s3c/regs-clock.h
rename arch/arm/{mach-s3c24xx => mach-s3c}/regs-dsc.h (100%)
rename arch/arm/{mach-s3c64xx => mach-s3c}/regs-gpio-memport.h (100%)
rename arch/arm/{mach-s3c24xx/include/mach/regs-gpio.h => mach-s3c/regs-gpio-s3c24xx.h} (99%)
rename arch/arm/{mach-s3c64xx/include/mach/regs-gpio.h => mach-s3c/regs-gpio-s3c64xx.h} (100%)
create mode 100644 arch/arm/mach-s3c/regs-gpio.h
rename arch/arm/{mach-s3c24xx/include/mach/regs-irq.h => mach-s3c/regs-irq-s3c24xx.h} (98%)
rename arch/arm/{mach-s3c64xx/include/mach/regs-irq.h => mach-s3c/regs-irq-s3c64xx.h} (100%)
create mode 100644 arch/arm/mach-s3c/regs-irq.h
rename arch/arm/{plat-samsung/include/plat => mach-s3c}/regs-irqtype.h (100%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/regs-mem.h (98%)
rename arch/arm/{mach-s3c64xx => mach-s3c}/regs-modem.h (100%)
rename arch/arm/{mach-s3c24xx/include/mach => mach-s3c}/regs-s3c2443-clock.h (81%)
rename arch/arm/{mach-s3c64xx => mach-s3c}/regs-srom.h (100%)
rename arch/arm/{mach-s3c64xx => mach-s3c}/regs-sys.h (100%)
rename arch/arm/{mach-s3c64xx => mach-s3c}/regs-syscon-power.h (100%)
rename arch/arm/{mach-s3c64xx => mach-s3c}/regs-usb-hsotg-phy.h (100%)
rename arch/arm/{mach-s3c24xx/include/mach => mach-s3c}/rtc-core.h (100%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/s3c2410.c (90%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/s3c2412-power.h (100%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/s3c2412.c (94%)
rename arch/arm/{mach-s3c24xx/include/mach => mach-s3c}/s3c2412.h (96%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/s3c2416.c (88%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/s3c2440.c (85%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/s3c2442.c (82%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/s3c2443.c (89%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/s3c244x.c (93%)
rename arch/arm/{mach-s3c24xx/common.c => mach-s3c/s3c24xx.c} (98%)
rename arch/arm/{mach-s3c24xx/common.h => mach-s3c/s3c24xx.h} (99%)
rename arch/arm/{mach-s3c64xx => mach-s3c}/s3c6400.c (89%)
rename arch/arm/{mach-s3c64xx => mach-s3c}/s3c6410.c (89%)
rename arch/arm/{mach-s3c64xx/common.c => mach-s3c/s3c64xx.c} (97%)
rename arch/arm/{mach-s3c64xx/common.h => mach-s3c/s3c64xx.h} (100%)
rename arch/arm/{plat-samsung/include/plat => mach-s3c}/samsung-time.h (100%)
rename arch/arm/{plat-samsung/include/plat => mach-s3c}/sdhci.h (99%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/setup-camif.c (95%)
rename arch/arm/{mach-s3c64xx => mach-s3c}/setup-fb-24bpp.c (86%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/setup-i2c.c (79%)
rename arch/arm/{mach-s3c64xx => mach-s3c}/setup-i2c0.c (90%)
rename arch/arm/{mach-s3c64xx => mach-s3c}/setup-i2c1.c (90%)
rename arch/arm/{mach-s3c64xx => mach-s3c}/setup-ide.c (89%)
rename arch/arm/{mach-s3c64xx => mach-s3c}/setup-keypad.c (86%)
rename arch/arm/{mach-s3c24xx/setup-sdhci-gpio.c => mach-s3c/setup-sdhci-gpio-s3c24xx.c} (90%)
rename arch/arm/{mach-s3c64xx/setup-sdhci-gpio.c => mach-s3c/setup-sdhci-gpio-s3c64xx.c} (95%)
rename arch/arm/{mach-s3c24xx/setup-spi.c => mach-s3c/setup-spi-s3c24xx.c} (85%)
rename arch/arm/{mach-s3c64xx/setup-spi.c => mach-s3c/setup-spi-s3c64xx.c} (89%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/setup-ts.c (88%)
rename arch/arm/{mach-s3c64xx => mach-s3c}/setup-usb-phy.c (96%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/simtec-audio.c (86%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/simtec-nor.c (98%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/simtec-pm.c (92%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/simtec-usb.c (96%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/simtec.h (100%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/sleep-s3c2410.S (92%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/sleep-s3c2412.S (93%)
rename arch/arm/{mach-s3c24xx/sleep.S => mach-s3c/sleep-s3c24xx.S} (92%)
rename arch/arm/{mach-s3c64xx/sleep.S => mach-s3c/sleep-s3c64xx.S} (97%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/spi-core.h (100%)
rename arch/arm/{plat-samsung/include/plat => mach-s3c}/usb-phy.h (100%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/vr1000.h (100%)
rename arch/arm/{plat-samsung => mach-s3c}/wakeup-mask.c (94%)
rename arch/arm/{plat-samsung/include/plat => mach-s3c}/wakeup-mask.h (100%)
rename arch/arm/{plat-samsung => mach-s3c}/watchdog-reset.c (100%)
rename arch/arm/{mach-s3c64xx => mach-s3c}/watchdog-reset.h (100%)
delete mode 100644 arch/arm/mach-s3c24xx/include/mach/fb.h
delete mode 100644 arch/arm/mach-s3c24xx/include/mach/io.h
delete mode 100644 arch/arm/mach-s3c64xx/include/mach/hardware.h
rename arch/arm/plat-samsung/pm-check.c => drivers/soc/samsung/s3c-pm-check.c (99%)
rename arch/arm/plat-samsung/pm-debug.c => drivers/soc/samsung/s3c-pm-debug.c (78%)
rename arch/arm/plat-samsung/include/plat/regs-spi.h => drivers/spi/spi-s3c24xx-regs.h (95%)
rename arch/arm/plat-samsung/include/plat/regs-udc.h => drivers/usb/gadget/udc/s3c2410_udc_regs.h (99%)
rename arch/arm/mach-s3c24xx/include/mach/regs-lcd.h => drivers/video/fbdev/s3c2410fb-regs-lcd.h (84%)
rename {arch/arm/plat-samsung/include/plat => include/linux/platform_data}/fb-s3c2410.h (57%)
rename arch/arm/plat-samsung/include/plat/adc.h => include/linux/soc/samsung/s3c-adc.h (100%)
rename arch/arm/plat-samsung/include/plat/cpu-freq.h => include/linux/soc/samsung/s3c-cpu-freq.h (100%)
rename arch/arm/plat-samsung/include/plat/cpu-freq-core.h => include/linux/soc/samsung/s3c-cpufreq-core.h (96%)
rename arch/arm/plat-samsung/include/plat/pm-common.h => include/linux/soc/samsung/s3c-pm.h (55%)
rename drivers/spi/spi-s3c24xx-fiq.h => include/linux/spi/s3c24xx-fiq.h (78%)
Cc: linux-kernel@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Cc: patches@opensource.cirrus.com
Cc: linux-stm32@st-md-mailman.stormreply.com
Cc: linux-clk@vger.kernel.org
Cc: linux-hwmon@vger.kernel.org
Cc: linux-input@vger.kernel.org
Cc: linux-leds@vger.kernel.org
Cc: linux-mmc@vger.kernel.org
Cc: linux-pwm@vger.kernel.org
Cc: linux-spi@vger.kernel.org
Cc: linux-serial@vger.kernel.org
Cc: linux-usb@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-fbdev@vger.kernel.org
Cc: alsa-devel@alsa-project.org
--
2.20.0
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 18+ messages in thread
* [PATCH 00/36] ARM: samsung platform cleanup
2019-10-10 20:28 [PATCH 00/36] ARM: samsung platform cleanup Arnd Bergmann
@ 2019-10-10 20:28 ` Arnd Bergmann
[not found] ` <20191010203043.1241612-1-arnd@arndb.de>
2019-10-23 13:10 ` [PATCH 00/36] ARM: samsung platform cleanup Krzysztof Kozlowski
2 siblings, 0 replies; 18+ messages in thread
From: Arnd Bergmann @ 2019-10-10 20:28 UTC (permalink / raw)
To: Kukjin Kim, Krzysztof Kozlowski
Cc: linux-samsung-soc, linux-arm-kernel, Arnd Bergmann, linux-kernel,
linux-pm, patches, linux-stm32, linux-clk, linux-hwmon,
linux-input, linux-leds, linux-mmc, linux-pwm, linux-spi,
linux-serial, linux-usb, dri-devel, linux-fbdev, alsa-devel
I've spent some time looking at the remaining ARMv4/ARMv5 platforms
that are not part of ARCH_MULTIPLATFORM, and tried to get them closer
to that. Here is what came out of that for the samsung platforms:
* Exynos and s5pv210 are made independent of plat-samsung
* device drivers stop using mach/*.h headers for s3c24xx
(and other platforms not in this series)
* s3c24xx and s3c64xx get merged into mach-s3c, removing
the need for plat-samsung (I have other patches for the
remaining plat-* directories)
* mach/io.h gets cleaned up to only be needed for BAST
PC104 mode (looking for ideas to proceed)
* mach/irqs.h remains for now, this still needs to be converted
to sparse IRQs.
Some bits are a little ugly, but overall I think this a big
improvement.
The contents are available for testing in
git://kernel.org:/pub/scm/linux/kernel/git/arnd/playground.git s3c-multiplatform
Given the overall size of the series I expect that there will
be bugs, so at this points I'm looking for reviews, acks and
testing from anyone who still has the hardware, in particular
s3c24xx, but also the other samsung platforms I'm touching.
Arnd
Arnd Bergmann (36):
ARM: samsung: make S3C24XX_MISCCR access indirect
ARM: s3c: simplify mach/io.h
usb: gadget: s3c: use platform resources
usb: gadget: s3c-hsudc: remove platform header dependency
ARM: samsung: make pm-debug platform independent
ARM: samsung: move CONFIG_DEBUG_S3C_UART to Kconfig.debug
ARM: exynos: use private samsung_cpu_id copy
ARM: exynos: stop selecting PLAT_SAMSUNG
ARM: samsung: move pm check code to drivers/soc
ARM: s5pv210: use private pm save/restore
ARM: s5pv210: split from plat-samsung
ARM: s3c64xx: remove mach/hardware.h
ARM: s3c: move regs-spi.h into spi driver
ARM: s3c: move irqchip driver back into platform
ARM: s3c: adc: move header to linux/soc/samsung
ARM: s3c: move spi fiq handler into platform
ARM: s3c: h1940-audio: turn into platform driver
ARM: s3c: gta02-audio: turn into platform driver
ARM: s3c: rx1950: turn into platform driver
ASoC: samsung: s3c2412-i2s: avoid hardcoded S3C2410_PA_IIS
ARM: s3c: move iis pinctrl config into boards
ARM: s3c: leds: move setpull() calls into board files
ARM: s3c: move s3cmci pinctrl handling into board files
ARM: s3c: include mach/irqs.h where needed
ARM: s3c: spi: avoid hardcoding fiq number in driver
ARM: s3c: bast: avoid irq_desc array usage
ARM: s3c: fix mmc gpio lookup tables
fbdev: s3c2410fb: remove mach header dependency
ARM: s3c: cpufreq: split out registers
ARM: s3c: remove cpufreq header dependencies
ARM: s3c: cpufreq: use global s3c2412_cpufreq_setrefresh
ARM: s3c: iotiming: make functions static
ARM: s3c: move low-level clk reg access into platform code
ARM: s3c: stop including mach/hardware.h from mach/io.h
ARM: s3c: move into a common directory
ARM: s3c: make headers local if possible
MAINTAINERS | 16 +-
arch/arm/Kconfig | 5 +-
arch/arm/Kconfig.debug | 18 +-
arch/arm/Makefile | 7 +-
arch/arm/mach-exynos/Makefile | 4 -
arch/arm/mach-exynos/common.h | 6 +-
arch/arm/mach-exynos/exynos.c | 19 +-
arch/arm/mach-exynos/include/mach/map.h | 18 --
arch/arm/mach-exynos/platsmp.c | 4 +-
arch/arm/mach-exynos/pm.c | 8 +-
arch/arm/{plat-samsung => mach-s3c}/Kconfig | 62 +----
.../Kconfig => mach-s3c/Kconfig.s3c24xx} | 0
.../Kconfig => mach-s3c/Kconfig.s3c64xx} | 0
arch/arm/{plat-samsung => mach-s3c}/Makefile | 15 +-
.../{mach-s3c24xx => mach-s3c}/Makefile.boot | 0
.../Makefile => mach-s3c/Makefile.s3c24xx} | 15 +-
.../Makefile => mach-s3c/Makefile.s3c64xx} | 14 +-
.../include/plat => mach-s3c}/adc-core.h | 0
arch/arm/{plat-samsung => mach-s3c}/adc.c | 4 +-
arch/arm/{mach-s3c24xx => mach-s3c}/anubis.h | 0
.../arm/{mach-s3c64xx => mach-s3c}/ata-core.h | 0
.../{mach-s3c64xx => mach-s3c}/backlight.h | 0
.../arm/{mach-s3c24xx => mach-s3c}/bast-ide.c | 3 +-
.../arm/{mach-s3c24xx => mach-s3c}/bast-irq.c | 8 +-
arch/arm/{mach-s3c24xx => mach-s3c}/bast.h | 0
.../{mach-s3c24xx => mach-s3c}/common-smdk.c | 17 +-
.../{mach-s3c24xx => mach-s3c}/common-smdk.h | 0
arch/arm/{plat-samsung => mach-s3c}/cpu.c | 21 +-
.../include/plat => mach-s3c}/cpu.h | 11 -
.../cpufreq-utils.c | 38 +++-
arch/arm/{mach-s3c64xx => mach-s3c}/cpuidle.c | 4 +-
.../arm/{mach-s3c64xx => mach-s3c}/crag6410.h | 2 +-
.../{mach-s3c64xx => mach-s3c}/dev-audio.c | 9 +-
.../dev-backlight.c | 4 +-
.../dev-uart-s3c64xx.c} | 5 +-
.../arm/{plat-samsung => mach-s3c}/dev-uart.c | 2 +-
arch/arm/{plat-samsung => mach-s3c}/devs.c | 56 +++--
.../include/plat => mach-s3c}/devs.h | 0
.../mach/dma.h => mach-s3c/dma-s3c24xx.h} | 0
.../mach/dma.h => mach-s3c/dma-s3c64xx.h} | 0
arch/arm/mach-s3c/dma.h | 7 +
arch/arm/{mach-s3c24xx => mach-s3c}/fb-core.h | 0
.../include/plat => mach-s3c}/fb.h | 0
.../plat => mach-s3c}/gpio-cfg-helpers.h | 0
.../include/plat => mach-s3c}/gpio-cfg.h | 0
.../include/plat => mach-s3c}/gpio-core.h | 2 +-
.../gpio-samsung-s3c24xx.h} | 2 +
.../gpio-samsung-s3c64xx.h} | 0
.../{plat-samsung => mach-s3c}/gpio-samsung.c | 18 +-
arch/arm/mach-s3c/gpio-samsung.h | 7 +
arch/arm/{mach-s3c24xx => mach-s3c}/gta02.h | 2 +-
.../h1940-bluetooth.c | 7 +-
arch/arm/{mach-s3c24xx => mach-s3c}/h1940.h | 0
.../include/mach => mach-s3c}/hardware.h | 7 -
.../include/plat => mach-s3c}/iic-core.h | 0
arch/arm/mach-s3c/include/mach/io.h | 50 +++++
.../include/mach/irqs-s3c24xx.h} | 0
.../include/mach/irqs-s3c64xx.h} | 0
arch/arm/mach-s3c/include/mach/irqs.h | 7 +
.../plat => mach-s3c/include/mach}/map-base.h | 0
arch/arm/{plat-samsung => mach-s3c}/init.c | 4 +-
.../iotiming-s3c2410.c | 12 +-
.../iotiming-s3c2412.c | 6 +-
.../irq-pm.c => mach-s3c/irq-pm-s3c24xx.c} | 16 +-
.../irq-pm.c => mach-s3c/irq-pm-s3c64xx.c} | 8 +-
arch/arm/mach-s3c/irq-s3c24xx-fiq-exports.c | 9 +
.../arm/mach-s3c/irq-s3c24xx-fiq.S | 10 +-
.../arm/mach-s3c}/irq-s3c24xx.c | 23 +-
.../arm/{mach-s3c64xx => mach-s3c}/irq-uart.h | 0
.../include/plat => mach-s3c}/keypad.h | 0
.../mach-amlm5900.c | 37 ++-
.../{mach-s3c24xx => mach-s3c}/mach-anubis.c | 14 +-
.../{mach-s3c64xx => mach-s3c}/mach-anw6410.c | 17 +-
.../mach-at2440evb.c | 28 ++-
.../{mach-s3c24xx => mach-s3c}/mach-bast.c | 22 +-
.../mach-crag6410-module.c | 2 +-
.../mach-crag6410.c | 27 ++-
.../{mach-s3c24xx => mach-s3c}/mach-gta02.c | 57 ++++-
.../{mach-s3c24xx => mach-s3c}/mach-h1940.c | 65 ++++--
.../arm/{mach-s3c64xx => mach-s3c}/mach-hmt.c | 15 +-
.../{mach-s3c24xx => mach-s3c}/mach-jive.c | 27 ++-
.../mach-mini2440.c | 48 ++--
.../mach-mini6410.c | 22 +-
.../arm/{mach-s3c24xx => mach-s3c}/mach-n30.c | 40 +++-
.../arm/{mach-s3c64xx => mach-s3c}/mach-ncp.c | 13 +-
.../mach-nexcoder.c | 20 +-
.../mach-osiris-dvs.c | 4 +-
.../{mach-s3c24xx => mach-s3c}/mach-osiris.c | 22 +-
.../{mach-s3c24xx => mach-s3c}/mach-otom.c | 17 +-
.../{mach-s3c24xx => mach-s3c}/mach-qt2410.c | 37 ++-
.../mach-real6410.c | 18 +-
.../{mach-s3c24xx => mach-s3c}/mach-rx1950.c | 57 +++--
.../{mach-s3c24xx => mach-s3c}/mach-rx3715.c | 26 ++-
.../mach-s3c2416-dt.c | 8 +-
.../mach-s3c64xx-dt.c | 6 +-
.../{mach-s3c64xx => mach-s3c}/mach-smartq.c | 18 +-
.../{mach-s3c64xx => mach-s3c}/mach-smartq.h | 0
.../{mach-s3c64xx => mach-s3c}/mach-smartq5.c | 18 +-
.../{mach-s3c64xx => mach-s3c}/mach-smartq7.c | 18 +-
.../mach-smdk2410.c | 14 +-
.../mach-smdk2413.c | 21 +-
.../mach-smdk2416.c | 23 +-
.../mach-smdk2440.c | 25 ++-
.../mach-smdk2443.c | 14 +-
.../mach-smdk6400.c | 13 +-
.../mach-smdk6410.c | 23 +-
.../mach-tct_hammer.c | 24 +-
.../{mach-s3c24xx => mach-s3c}/mach-vr1000.c | 20 +-
.../{mach-s3c24xx => mach-s3c}/mach-vstms.c | 20 +-
.../include/plat => mach-s3c}/map-s3c.h | 12 +-
.../mach/map.h => mach-s3c/map-s3c24xx.h} | 6 +-
.../mach/map.h => mach-s3c/map-s3c64xx.h} | 4 +-
.../include/plat => mach-s3c}/map-s5p.h | 4 +-
arch/arm/mach-s3c/map.h | 7 +
.../{mach-s3c24xx => mach-s3c}/nand-core.h | 0
.../{mach-s3c64xx => mach-s3c}/onenand-core.h | 0
arch/arm/{mach-s3c24xx => mach-s3c}/osiris.h | 0
arch/arm/{mach-s3c24xx => mach-s3c}/otom.h | 0
arch/arm/{mach-s3c64xx => mach-s3c}/pl080.c | 4 +-
.../{plat-samsung => mach-s3c}/platformdata.c | 4 +-
.../{mach-s3c24xx => mach-s3c}/pll-s3c2410.c | 4 +-
.../pll-s3c2440-12000000.c | 4 +-
.../pll-s3c2440-16934400.c | 4 +-
.../{plat-samsung => mach-s3c}/pm-common.c | 2 +-
arch/arm/mach-s3c/pm-common.h | 40 ++++
.../pm-core.h => mach-s3c/pm-core-s3c24xx.h} | 8 +-
.../pm-core.h => mach-s3c/pm-core-s3c64xx.h} | 50 +----
arch/arm/mach-s3c/pm-core.h | 7 +
arch/arm/{plat-samsung => mach-s3c}/pm-gpio.c | 6 +-
.../arm/{mach-s3c24xx => mach-s3c}/pm-h1940.S | 5 +-
.../{mach-s3c24xx => mach-s3c}/pm-s3c2410.c | 11 +-
.../{mach-s3c24xx => mach-s3c}/pm-s3c2412.c | 11 +-
.../{mach-s3c24xx => mach-s3c}/pm-s3c2416.c | 6 +-
.../pm.c => mach-s3c/pm-s3c24xx.c} | 12 +-
.../pm.c => mach-s3c/pm-s3c64xx.c} | 66 +++++-
arch/arm/{plat-samsung => mach-s3c}/pm.c | 20 +-
.../include/plat => mach-s3c}/pm.h | 2 +-
.../include/plat => mach-s3c}/pwm-core.h | 0
.../include/plat => mach-s3c}/regs-adc.h | 0
.../regs-clock-s3c24xx.h} | 2 +
.../regs-clock-s3c64xx.h} | 0
arch/arm/mach-s3c/regs-clock.h | 7 +
.../arm/{mach-s3c24xx => mach-s3c}/regs-dsc.h | 0
.../regs-gpio-memport.h | 0
.../regs-gpio-s3c24xx.h} | 2 +
.../regs-gpio-s3c64xx.h} | 0
arch/arm/mach-s3c/regs-gpio.h | 7 +
.../regs-irq-s3c24xx.h} | 2 +
.../regs-irq-s3c64xx.h} | 0
arch/arm/mach-s3c/regs-irq.h | 7 +
.../include/plat => mach-s3c}/regs-irqtype.h | 0
.../arm/{mach-s3c24xx => mach-s3c}/regs-mem.h | 2 +
.../{mach-s3c64xx => mach-s3c}/regs-modem.h | 0
.../mach => mach-s3c}/regs-s3c2443-clock.h | 50 +++++
.../{mach-s3c64xx => mach-s3c}/regs-srom.h | 0
.../arm/{mach-s3c64xx => mach-s3c}/regs-sys.h | 0
.../regs-syscon-power.h | 0
.../regs-usb-hsotg-phy.h | 0
.../include/mach => mach-s3c}/rtc-core.h | 0
arch/arm/{mach-s3c24xx => mach-s3c}/s3c2410.c | 21 +-
.../s3c2412-power.h | 0
arch/arm/{mach-s3c24xx => mach-s3c}/s3c2412.c | 16 +-
.../include/mach => mach-s3c}/s3c2412.h | 2 +
arch/arm/{mach-s3c24xx => mach-s3c}/s3c2416.c | 28 +--
arch/arm/{mach-s3c24xx => mach-s3c}/s3c2440.c | 17 +-
arch/arm/{mach-s3c24xx => mach-s3c}/s3c2442.c | 17 +-
arch/arm/{mach-s3c24xx => mach-s3c}/s3c2443.c | 21 +-
arch/arm/{mach-s3c24xx => mach-s3c}/s3c244x.c | 16 +-
.../common.c => mach-s3c/s3c24xx.c} | 21 +-
.../common.h => mach-s3c/s3c24xx.h} | 1 +
arch/arm/{mach-s3c64xx => mach-s3c}/s3c6400.c | 14 +-
arch/arm/{mach-s3c64xx => mach-s3c}/s3c6410.c | 17 +-
.../common.c => mach-s3c/s3c64xx.c} | 24 +-
.../common.h => mach-s3c/s3c64xx.h} | 0
.../include/plat => mach-s3c}/samsung-time.h | 0
.../include/plat => mach-s3c}/sdhci.h | 2 +-
.../{mach-s3c24xx => mach-s3c}/setup-camif.c | 4 +-
.../setup-fb-24bpp.c | 6 +-
.../{mach-s3c24xx => mach-s3c}/setup-i2c.c | 7 +-
.../{mach-s3c64xx => mach-s3c}/setup-i2c0.c | 4 +-
.../{mach-s3c64xx => mach-s3c}/setup-i2c1.c | 4 +-
.../{mach-s3c64xx => mach-s3c}/setup-ide.c | 8 +-
.../{mach-s3c64xx => mach-s3c}/setup-keypad.c | 6 +-
.../setup-sdhci-gpio-s3c24xx.c} | 6 +-
.../setup-sdhci-gpio-s3c64xx.c} | 6 +-
.../setup-spi-s3c24xx.c} | 6 +-
.../setup-spi-s3c64xx.c} | 4 +-
.../arm/{mach-s3c24xx => mach-s3c}/setup-ts.c | 5 +-
.../setup-usb-phy.c | 6 +-
.../{mach-s3c24xx => mach-s3c}/simtec-audio.c | 11 +-
.../{mach-s3c24xx => mach-s3c}/simtec-nor.c | 2 +-
.../{mach-s3c24xx => mach-s3c}/simtec-pm.c | 8 +-
.../{mach-s3c24xx => mach-s3c}/simtec-usb.c | 6 +-
arch/arm/{mach-s3c24xx => mach-s3c}/simtec.h | 0
.../sleep-s3c2410.S | 7 +-
.../sleep-s3c2412.S | 5 +-
.../sleep.S => mach-s3c/sleep-s3c24xx.S} | 7 +-
.../sleep.S => mach-s3c/sleep-s3c64xx.S} | 4 +-
.../arm/{mach-s3c24xx => mach-s3c}/spi-core.h | 0
.../include/plat => mach-s3c}/usb-phy.h | 0
arch/arm/{mach-s3c24xx => mach-s3c}/vr1000.h | 0
.../{plat-samsung => mach-s3c}/wakeup-mask.c | 4 +-
.../include/plat => mach-s3c}/wakeup-mask.h | 0
.../watchdog-reset.c | 0
.../watchdog-reset.h | 0
arch/arm/mach-s3c24xx/include/mach/fb.h | 2 -
arch/arm/mach-s3c24xx/include/mach/io.h | 212 ------------------
arch/arm/mach-s3c64xx/include/mach/hardware.h | 17 --
arch/arm/mach-s5pv210/Kconfig | 1 +
arch/arm/mach-s5pv210/Makefile | 7 -
arch/arm/mach-s5pv210/pm.c | 51 ++++-
arch/arm/mach-s5pv210/regs-clock.h | 2 +-
arch/arm/mach-s5pv210/s5pv210.c | 2 -
drivers/clk/samsung/clk-s3c2410-dclk.c | 10 +-
drivers/cpufreq/s3c2410-cpufreq.c | 10 +-
drivers/cpufreq/s3c2412-cpufreq.c | 44 ++--
drivers/cpufreq/s3c2440-cpufreq.c | 29 ++-
drivers/cpufreq/s3c24xx-cpufreq-debugfs.c | 2 +-
drivers/cpufreq/s3c24xx-cpufreq.c | 14 +-
drivers/hwmon/s3c-hwmon.c | 2 +-
drivers/input/touchscreen/s3c2410_ts.c | 37 ++-
drivers/irqchip/Makefile | 1 -
drivers/leds/leds-s3c24xx.c | 7 -
drivers/mmc/host/Kconfig | 2 +-
drivers/mmc/host/s3cmci.c | 72 ++----
drivers/power/supply/s3c_adc_battery.c | 2 +-
drivers/pwm/Kconfig | 2 +-
drivers/soc/samsung/Kconfig | 48 +++-
drivers/soc/samsung/Makefile | 3 +
.../soc/samsung/s3c-pm-check.c | 2 +-
.../soc/samsung/s3c-pm-debug.c | 26 +--
drivers/spi/Kconfig | 2 +-
drivers/spi/Makefile | 1 -
.../spi/spi-s3c24xx-regs.h | 3 +-
drivers/spi/spi-s3c24xx.c | 28 +--
drivers/tty/serial/Kconfig | 2 +-
drivers/usb/gadget/udc/s3c-hsudc.c | 55 +----
drivers/usb/gadget/udc/s3c2410_udc.c | 31 +--
drivers/usb/gadget/udc/s3c2410_udc.h | 1 +
.../usb/gadget/udc/s3c2410_udc_regs.h | 2 +
.../video/fbdev/s3c2410fb-regs-lcd.h | 28 +--
drivers/video/fbdev/s3c2410fb.c | 16 +-
.../linux/platform_data}/fb-s3c2410.h | 33 ++-
include/linux/platform_data/mmc-s3cmci.h | 2 +
include/linux/platform_data/s3c-hsudc.h | 2 +
.../linux/soc/samsung/s3c-adc.h | 0
.../linux/soc/samsung/s3c-cpu-freq.h | 0
.../linux/soc/samsung/s3c-cpufreq-core.h | 10 +-
.../linux/soc/samsung/s3c-pm.h | 69 +++---
.../linux/spi/s3c24xx-fiq.h | 5 +
include/linux/spi/s3c24xx.h | 2 +-
sound/soc/samsung/Kconfig | 2 +-
sound/soc/samsung/h1940_uda1380.c | 71 ++----
sound/soc/samsung/neo1973_wm8753.c | 85 +++----
sound/soc/samsung/rx1950_uda1380.c | 72 ++----
sound/soc/samsung/s3c-i2s-v2.c | 3 +-
sound/soc/samsung/s3c-i2s-v2.h | 3 +-
sound/soc/samsung/s3c2412-i2s.c | 9 +-
sound/soc/samsung/s3c24xx-i2s.c | 7 -
259 files changed, 1716 insertions(+), 1648 deletions(-)
delete mode 100644 arch/arm/mach-exynos/include/mach/map.h
rename arch/arm/{plat-samsung => mach-s3c}/Kconfig (73%)
rename arch/arm/{mach-s3c24xx/Kconfig => mach-s3c/Kconfig.s3c24xx} (100%)
rename arch/arm/{mach-s3c64xx/Kconfig => mach-s3c/Kconfig.s3c64xx} (100%)
rename arch/arm/{plat-samsung => mach-s3c}/Makefile (67%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/Makefile.boot (100%)
rename arch/arm/{mach-s3c24xx/Makefile => mach-s3c/Makefile.s3c24xx} (86%)
rename arch/arm/{mach-s3c64xx/Makefile => mach-s3c/Makefile.s3c64xx} (83%)
rename arch/arm/{plat-samsung/include/plat => mach-s3c}/adc-core.h (100%)
rename arch/arm/{plat-samsung => mach-s3c}/adc.c (99%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/anubis.h (100%)
rename arch/arm/{mach-s3c64xx => mach-s3c}/ata-core.h (100%)
rename arch/arm/{mach-s3c64xx => mach-s3c}/backlight.h (100%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/bast-ide.c (97%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/bast-irq.c (95%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/bast.h (100%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/common-smdk.c (93%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/common-smdk.h (100%)
rename arch/arm/{plat-samsung => mach-s3c}/cpu.c (62%)
rename arch/arm/{plat-samsung/include/plat => mach-s3c}/cpu.h (91%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/cpufreq-utils.c (70%)
rename arch/arm/{mach-s3c64xx => mach-s3c}/cpuidle.c (96%)
rename arch/arm/{mach-s3c64xx => mach-s3c}/crag6410.h (95%)
rename arch/arm/{mach-s3c64xx => mach-s3c}/dev-audio.c (97%)
rename arch/arm/{mach-s3c64xx => mach-s3c}/dev-backlight.c (98%)
rename arch/arm/{mach-s3c64xx/dev-uart.c => mach-s3c/dev-uart-s3c64xx.c} (95%)
rename arch/arm/{plat-samsung => mach-s3c}/dev-uart.c (97%)
rename arch/arm/{plat-samsung => mach-s3c}/devs.c (96%)
rename arch/arm/{plat-samsung/include/plat => mach-s3c}/devs.h (100%)
rename arch/arm/{mach-s3c24xx/include/mach/dma.h => mach-s3c/dma-s3c24xx.h} (100%)
rename arch/arm/{mach-s3c64xx/include/mach/dma.h => mach-s3c/dma-s3c64xx.h} (100%)
create mode 100644 arch/arm/mach-s3c/dma.h
rename arch/arm/{mach-s3c24xx => mach-s3c}/fb-core.h (100%)
rename arch/arm/{plat-samsung/include/plat => mach-s3c}/fb.h (100%)
rename arch/arm/{plat-samsung/include/plat => mach-s3c}/gpio-cfg-helpers.h (100%)
rename arch/arm/{plat-samsung/include/plat => mach-s3c}/gpio-cfg.h (100%)
rename arch/arm/{plat-samsung/include/plat => mach-s3c}/gpio-core.h (99%)
rename arch/arm/{mach-s3c24xx/include/mach/gpio-samsung.h => mach-s3c/gpio-samsung-s3c24xx.h} (99%)
rename arch/arm/{mach-s3c64xx/include/mach/gpio-samsung.h => mach-s3c/gpio-samsung-s3c64xx.h} (100%)
rename arch/arm/{plat-samsung => mach-s3c}/gpio-samsung.c (99%)
create mode 100644 arch/arm/mach-s3c/gpio-samsung.h
rename arch/arm/{mach-s3c24xx => mach-s3c}/gta02.h (94%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/h1940-bluetooth.c (96%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/h1940.h (100%)
rename arch/arm/{mach-s3c24xx/include/mach => mach-s3c}/hardware.h (76%)
rename arch/arm/{plat-samsung/include/plat => mach-s3c}/iic-core.h (100%)
create mode 100644 arch/arm/mach-s3c/include/mach/io.h
rename arch/arm/{mach-s3c24xx/include/mach/irqs.h => mach-s3c/include/mach/irqs-s3c24xx.h} (100%)
rename arch/arm/{mach-s3c64xx/include/mach/irqs.h => mach-s3c/include/mach/irqs-s3c64xx.h} (100%)
create mode 100644 arch/arm/mach-s3c/include/mach/irqs.h
rename arch/arm/{plat-samsung/include/plat => mach-s3c/include/mach}/map-base.h (100%)
rename arch/arm/{plat-samsung => mach-s3c}/init.c (98%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/iotiming-s3c2410.c (97%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/iotiming-s3c2412.c (98%)
rename arch/arm/{mach-s3c24xx/irq-pm.c => mach-s3c/irq-pm-s3c24xx.c} (93%)
rename arch/arm/{mach-s3c64xx/irq-pm.c => mach-s3c/irq-pm-s3c64xx.c} (97%)
create mode 100644 arch/arm/mach-s3c/irq-s3c24xx-fiq-exports.c
rename drivers/spi/spi-s3c24xx-fiq.S => arch/arm/mach-s3c/irq-s3c24xx-fiq.S (94%)
rename {drivers/irqchip => arch/arm/mach-s3c}/irq-s3c24xx.c (99%)
rename arch/arm/{mach-s3c64xx => mach-s3c}/irq-uart.h (100%)
rename arch/arm/{plat-samsung/include/plat => mach-s3c}/keypad.h (100%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/mach-amlm5900.c (84%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/mach-anubis.c (97%)
rename arch/arm/{mach-s3c64xx => mach-s3c}/mach-anw6410.c (96%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/mach-at2440evb.c (88%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/mach-bast.c (98%)
rename arch/arm/{mach-s3c64xx => mach-s3c}/mach-crag6410-module.c (99%)
rename arch/arm/{mach-s3c64xx => mach-s3c}/mach-crag6410.c (98%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/mach-gta02.c (90%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/mach-h1940.c (92%)
rename arch/arm/{mach-s3c64xx => mach-s3c}/mach-hmt.c (97%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/mach-jive.c (97%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/mach-mini2440.c (93%)
rename arch/arm/{mach-s3c64xx => mach-s3c}/mach-mini6410.c (97%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/mach-n30.c (93%)
rename arch/arm/{mach-s3c64xx => mach-s3c}/mach-ncp.c (92%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/mach-nexcoder.c (92%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/mach-osiris-dvs.c (98%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/mach-osiris.c (97%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/mach-otom.c (89%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/mach-qt2410.c (88%)
rename arch/arm/{mach-s3c64xx => mach-s3c}/mach-real6410.c (97%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/mach-rx1950.c (93%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/mach-rx3715.c (90%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/mach-s3c2416-dt.c (92%)
rename arch/arm/{mach-s3c64xx => mach-s3c}/mach-s3c64xx-dt.c (95%)
rename arch/arm/{mach-s3c64xx => mach-s3c}/mach-smartq.c (97%)
rename arch/arm/{mach-s3c64xx => mach-s3c}/mach-smartq.h (100%)
rename arch/arm/{mach-s3c64xx => mach-s3c}/mach-smartq5.c (93%)
rename arch/arm/{mach-s3c64xx => mach-s3c}/mach-smartq7.c (94%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/mach-smdk2410.c (89%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/mach-smdk2413.c (90%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/mach-smdk2416.c (95%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/mach-smdk2440.c (89%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/mach-smdk2443.c (93%)
rename arch/arm/{mach-s3c64xx => mach-s3c}/mach-smdk6400.c (92%)
rename arch/arm/{mach-s3c64xx => mach-s3c}/mach-smdk6410.c (98%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/mach-tct_hammer.c (82%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/mach-vr1000.c (95%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/mach-vstms.c (90%)
rename arch/arm/{plat-samsung/include/plat => mach-s3c}/map-s3c.h (87%)
rename arch/arm/{mach-s3c24xx/include/mach/map.h => mach-s3c/map-s3c24xx.h} (97%)
rename arch/arm/{mach-s3c64xx/include/mach/map.h => mach-s3c/map-s3c64xx.h} (98%)
rename arch/arm/{plat-samsung/include/plat => mach-s3c}/map-s5p.h (85%)
create mode 100644 arch/arm/mach-s3c/map.h
rename arch/arm/{mach-s3c24xx => mach-s3c}/nand-core.h (100%)
rename arch/arm/{mach-s3c64xx => mach-s3c}/onenand-core.h (100%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/osiris.h (100%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/otom.h (100%)
rename arch/arm/{mach-s3c64xx => mach-s3c}/pl080.c (99%)
rename arch/arm/{plat-samsung => mach-s3c}/platformdata.c (96%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/pll-s3c2410.c (97%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/pll-s3c2440-12000000.c (97%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/pll-s3c2440-16934400.c (98%)
rename arch/arm/{plat-samsung => mach-s3c}/pm-common.c (98%)
create mode 100644 arch/arm/mach-s3c/pm-common.h
rename arch/arm/{mach-s3c24xx/include/mach/pm-core.h => mach-s3c/pm-core-s3c24xx.h} (95%)
rename arch/arm/{mach-s3c64xx/include/mach/pm-core.h => mach-s3c/pm-core-s3c64xx.h} (58%)
create mode 100644 arch/arm/mach-s3c/pm-core.h
rename arch/arm/{plat-samsung => mach-s3c}/pm-gpio.c (99%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/pm-h1940.S (80%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/pm-s3c2410.c (96%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/pm-s3c2412.c (95%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/pm-s3c2416.c (95%)
rename arch/arm/{mach-s3c24xx/pm.c => mach-s3c/pm-s3c24xx.c} (94%)
rename arch/arm/{mach-s3c64xx/pm.c => mach-s3c/pm-s3c64xx.c} (83%)
rename arch/arm/{plat-samsung => mach-s3c}/pm.c (94%)
rename arch/arm/{plat-samsung/include/plat => mach-s3c}/pm.h (98%)
rename arch/arm/{plat-samsung/include/plat => mach-s3c}/pwm-core.h (100%)
rename arch/arm/{plat-samsung/include/plat => mach-s3c}/regs-adc.h (100%)
rename arch/arm/{mach-s3c24xx/include/mach/regs-clock.h => mach-s3c/regs-clock-s3c24xx.h} (99%)
rename arch/arm/{mach-s3c64xx/include/mach/regs-clock.h => mach-s3c/regs-clock-s3c64xx.h} (100%)
create mode 100644 arch/arm/mach-s3c/regs-clock.h
rename arch/arm/{mach-s3c24xx => mach-s3c}/regs-dsc.h (100%)
rename arch/arm/{mach-s3c64xx => mach-s3c}/regs-gpio-memport.h (100%)
rename arch/arm/{mach-s3c24xx/include/mach/regs-gpio.h => mach-s3c/regs-gpio-s3c24xx.h} (99%)
rename arch/arm/{mach-s3c64xx/include/mach/regs-gpio.h => mach-s3c/regs-gpio-s3c64xx.h} (100%)
create mode 100644 arch/arm/mach-s3c/regs-gpio.h
rename arch/arm/{mach-s3c24xx/include/mach/regs-irq.h => mach-s3c/regs-irq-s3c24xx.h} (98%)
rename arch/arm/{mach-s3c64xx/include/mach/regs-irq.h => mach-s3c/regs-irq-s3c64xx.h} (100%)
create mode 100644 arch/arm/mach-s3c/regs-irq.h
rename arch/arm/{plat-samsung/include/plat => mach-s3c}/regs-irqtype.h (100%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/regs-mem.h (98%)
rename arch/arm/{mach-s3c64xx => mach-s3c}/regs-modem.h (100%)
rename arch/arm/{mach-s3c24xx/include/mach => mach-s3c}/regs-s3c2443-clock.h (81%)
rename arch/arm/{mach-s3c64xx => mach-s3c}/regs-srom.h (100%)
rename arch/arm/{mach-s3c64xx => mach-s3c}/regs-sys.h (100%)
rename arch/arm/{mach-s3c64xx => mach-s3c}/regs-syscon-power.h (100%)
rename arch/arm/{mach-s3c64xx => mach-s3c}/regs-usb-hsotg-phy.h (100%)
rename arch/arm/{mach-s3c24xx/include/mach => mach-s3c}/rtc-core.h (100%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/s3c2410.c (90%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/s3c2412-power.h (100%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/s3c2412.c (94%)
rename arch/arm/{mach-s3c24xx/include/mach => mach-s3c}/s3c2412.h (96%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/s3c2416.c (88%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/s3c2440.c (85%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/s3c2442.c (82%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/s3c2443.c (89%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/s3c244x.c (93%)
rename arch/arm/{mach-s3c24xx/common.c => mach-s3c/s3c24xx.c} (98%)
rename arch/arm/{mach-s3c24xx/common.h => mach-s3c/s3c24xx.h} (99%)
rename arch/arm/{mach-s3c64xx => mach-s3c}/s3c6400.c (89%)
rename arch/arm/{mach-s3c64xx => mach-s3c}/s3c6410.c (89%)
rename arch/arm/{mach-s3c64xx/common.c => mach-s3c/s3c64xx.c} (97%)
rename arch/arm/{mach-s3c64xx/common.h => mach-s3c/s3c64xx.h} (100%)
rename arch/arm/{plat-samsung/include/plat => mach-s3c}/samsung-time.h (100%)
rename arch/arm/{plat-samsung/include/plat => mach-s3c}/sdhci.h (99%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/setup-camif.c (95%)
rename arch/arm/{mach-s3c64xx => mach-s3c}/setup-fb-24bpp.c (86%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/setup-i2c.c (79%)
rename arch/arm/{mach-s3c64xx => mach-s3c}/setup-i2c0.c (90%)
rename arch/arm/{mach-s3c64xx => mach-s3c}/setup-i2c1.c (90%)
rename arch/arm/{mach-s3c64xx => mach-s3c}/setup-ide.c (89%)
rename arch/arm/{mach-s3c64xx => mach-s3c}/setup-keypad.c (86%)
rename arch/arm/{mach-s3c24xx/setup-sdhci-gpio.c => mach-s3c/setup-sdhci-gpio-s3c24xx.c} (90%)
rename arch/arm/{mach-s3c64xx/setup-sdhci-gpio.c => mach-s3c/setup-sdhci-gpio-s3c64xx.c} (95%)
rename arch/arm/{mach-s3c24xx/setup-spi.c => mach-s3c/setup-spi-s3c24xx.c} (85%)
rename arch/arm/{mach-s3c64xx/setup-spi.c => mach-s3c/setup-spi-s3c64xx.c} (89%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/setup-ts.c (88%)
rename arch/arm/{mach-s3c64xx => mach-s3c}/setup-usb-phy.c (96%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/simtec-audio.c (86%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/simtec-nor.c (98%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/simtec-pm.c (92%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/simtec-usb.c (96%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/simtec.h (100%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/sleep-s3c2410.S (92%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/sleep-s3c2412.S (93%)
rename arch/arm/{mach-s3c24xx/sleep.S => mach-s3c/sleep-s3c24xx.S} (92%)
rename arch/arm/{mach-s3c64xx/sleep.S => mach-s3c/sleep-s3c64xx.S} (97%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/spi-core.h (100%)
rename arch/arm/{plat-samsung/include/plat => mach-s3c}/usb-phy.h (100%)
rename arch/arm/{mach-s3c24xx => mach-s3c}/vr1000.h (100%)
rename arch/arm/{plat-samsung => mach-s3c}/wakeup-mask.c (94%)
rename arch/arm/{plat-samsung/include/plat => mach-s3c}/wakeup-mask.h (100%)
rename arch/arm/{plat-samsung => mach-s3c}/watchdog-reset.c (100%)
rename arch/arm/{mach-s3c64xx => mach-s3c}/watchdog-reset.h (100%)
delete mode 100644 arch/arm/mach-s3c24xx/include/mach/fb.h
delete mode 100644 arch/arm/mach-s3c24xx/include/mach/io.h
delete mode 100644 arch/arm/mach-s3c64xx/include/mach/hardware.h
rename arch/arm/plat-samsung/pm-check.c => drivers/soc/samsung/s3c-pm-check.c (99%)
rename arch/arm/plat-samsung/pm-debug.c => drivers/soc/samsung/s3c-pm-debug.c (78%)
rename arch/arm/plat-samsung/include/plat/regs-spi.h => drivers/spi/spi-s3c24xx-regs.h (95%)
rename arch/arm/plat-samsung/include/plat/regs-udc.h => drivers/usb/gadget/udc/s3c2410_udc_regs.h (99%)
rename arch/arm/mach-s3c24xx/include/mach/regs-lcd.h => drivers/video/fbdev/s3c2410fb-regs-lcd.h (84%)
rename {arch/arm/plat-samsung/include/plat => include/linux/platform_data}/fb-s3c2410.h (57%)
rename arch/arm/plat-samsung/include/plat/adc.h => include/linux/soc/samsung/s3c-adc.h (100%)
rename arch/arm/plat-samsung/include/plat/cpu-freq.h => include/linux/soc/samsung/s3c-cpu-freq.h (100%)
rename arch/arm/plat-samsung/include/plat/cpu-freq-core.h => include/linux/soc/samsung/s3c-cpufreq-core.h (96%)
rename arch/arm/plat-samsung/include/plat/pm-common.h => include/linux/soc/samsung/s3c-pm.h (55%)
rename drivers/spi/spi-s3c24xx-fiq.h => include/linux/spi/s3c24xx-fiq.h (78%)
Cc: linux-kernel@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Cc: patches@opensource.cirrus.com
Cc: linux-stm32@st-md-mailman.stormreply.com
Cc: linux-clk@vger.kernel.org
Cc: linux-hwmon@vger.kernel.org
Cc: linux-input@vger.kernel.org
Cc: linux-leds@vger.kernel.org
Cc: linux-mmc@vger.kernel.org
Cc: linux-pwm@vger.kernel.org
Cc: linux-spi@vger.kernel.org
Cc: linux-serial@vger.kernel.org
Cc: linux-usb@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-fbdev@vger.kernel.org
Cc: alsa-devel@alsa-project.org
--
2.20.0
^ permalink raw reply [flat|nested] 18+ messages in thread
* [PATCH 11/36] ARM: s5pv210: split from plat-samsung
[not found] ` <20191010203043.1241612-1-arnd@arndb.de>
@ 2019-10-10 20:29 ` Arnd Bergmann
2019-10-10 20:29 ` Arnd Bergmann
` (4 more replies)
0 siblings, 5 replies; 18+ messages in thread
From: Arnd Bergmann @ 2019-10-10 20:29 UTC (permalink / raw)
To: Kukjin Kim, Krzysztof Kozlowski, Ulf Hansson, Thierry Reding,
Mark Brown, Greg Kroah-Hartman, Jiri Slaby, Sangbeom Kim,
Sylwester Nawrocki, Liam Girdwood
Cc: linux-pwm, alsa-devel, linux-samsung-soc, Arnd Bergmann,
Bartlomiej Zolnierkiewicz, linux-kernel, linus.walleij,
linux-mmc, Takashi Iwai, Jaroslav Kysela, Mauro Carvalho Chehab,
Faiz Abbas, Clément Péron, linux-serial,
Uwe Kleine-König, Olof Johansson, linux-spi, Sascha Hauer,
linux-arm-kernel
These can be build completely independently, so split
the two Kconfig symbols.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
arch/arm/Kconfig.debug | 6 +++---
arch/arm/Makefile | 1 -
arch/arm/plat-samsung/Kconfig | 2 +-
drivers/mmc/host/Kconfig | 2 +-
drivers/pwm/Kconfig | 2 +-
drivers/spi/Kconfig | 2 +-
drivers/tty/serial/Kconfig | 2 +-
sound/soc/samsung/Kconfig | 2 +-
8 files changed, 9 insertions(+), 10 deletions(-)
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 9c4f2d6deb06..4c4e97ae4fcb 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -998,7 +998,7 @@ choice
via SCIFA4 on Renesas SH-Mobile AG5 (SH73A0).
config DEBUG_S3C_UART0
- depends on PLAT_SAMSUNG || ARCH_EXYNOS
+ depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS
select DEBUG_EXYNOS_UART if ARCH_EXYNOS
select DEBUG_S3C24XX_UART if ARCH_S3C24XX
select DEBUG_S3C64XX_UART if ARCH_S3C64XX
@@ -1010,7 +1010,7 @@ choice
by the boot-loader before use.
config DEBUG_S3C_UART1
- depends on PLAT_SAMSUNG || ARCH_EXYNOS
+ depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS
select DEBUG_EXYNOS_UART if ARCH_EXYNOS
select DEBUG_S3C24XX_UART if ARCH_S3C24XX
select DEBUG_S3C64XX_UART if ARCH_S3C64XX
@@ -1022,7 +1022,7 @@ choice
by the boot-loader before use.
config DEBUG_S3C_UART2
- depends on PLAT_SAMSUNG || ARCH_EXYNOS
+ depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS
select DEBUG_EXYNOS_UART if ARCH_EXYNOS
select DEBUG_S3C24XX_UART if ARCH_S3C24XX
select DEBUG_S3C64XX_UART if ARCH_S3C64XX
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index f492d7c338fe..a1bc15cda751 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -235,7 +235,6 @@ machine-$(CONFIG_PLAT_SPEAR) += spear
# by CONFIG_* macro name.
plat-$(CONFIG_ARCH_OMAP) += omap
plat-$(CONFIG_ARCH_S3C64XX) += samsung
-plat-$(CONFIG_ARCH_S5PV210) += samsung
plat-$(CONFIG_PLAT_ORION) += orion
plat-$(CONFIG_PLAT_PXA) += pxa
plat-$(CONFIG_PLAT_S3C24XX) += samsung
diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
index 740bdb23f38a..1530946cc672 100644
--- a/arch/arm/plat-samsung/Kconfig
+++ b/arch/arm/plat-samsung/Kconfig
@@ -4,7 +4,7 @@
config PLAT_SAMSUNG
bool
- depends on PLAT_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210
+ depends on PLAT_S3C24XX || ARCH_S3C64XX
default y
select GENERIC_IRQ_CHIP
select NO_IOPORT_MAP
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index 400a581c918c..16a0e5430b44 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -275,7 +275,7 @@ config MMC_SDHCI_TEGRA
config MMC_SDHCI_S3C
tristate "SDHCI support on Samsung S3C SoC"
- depends on MMC_SDHCI && (PLAT_SAMSUNG || ARCH_EXYNOS)
+ depends on MMC_SDHCI && (PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS)
help
This selects the Secure Digital Host Controller Interface (SDHCI)
often referrered to as the HSMMC block in some of the Samsung S3C
diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
index e3a2518503ed..8eb738cac0c7 100644
--- a/drivers/pwm/Kconfig
+++ b/drivers/pwm/Kconfig
@@ -394,7 +394,7 @@ config PWM_ROCKCHIP
config PWM_SAMSUNG
tristate "Samsung PWM support"
- depends on PLAT_SAMSUNG || ARCH_EXYNOS
+ depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS
help
Generic PWM framework driver for Samsung.
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 6f7fdcbb9151..355391ee643d 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -625,7 +625,7 @@ config SPI_S3C24XX_FIQ
config SPI_S3C64XX
tristate "Samsung S3C64XX series type SPI"
- depends on (PLAT_SAMSUNG || ARCH_EXYNOS || COMPILE_TEST)
+ depends on (PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST)
help
SPI driver for Samsung S3C64XX and newer SoCs.
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 4789b5d62f63..17f01cf3009c 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -237,7 +237,7 @@ config SERIAL_CLPS711X_CONSOLE
config SERIAL_SAMSUNG
tristate "Samsung SoC serial support"
- depends on PLAT_SAMSUNG || ARCH_EXYNOS
+ depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS
select SERIAL_CORE
help
Support for the on-chip UARTs on the Samsung S3C24XX series CPUs,
diff --git a/sound/soc/samsung/Kconfig b/sound/soc/samsung/Kconfig
index 638983123d8f..7a0035dd9995 100644
--- a/sound/soc/samsung/Kconfig
+++ b/sound/soc/samsung/Kconfig
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: GPL-2.0-only
menuconfig SND_SOC_SAMSUNG
tristate "ASoC support for Samsung"
- depends on PLAT_SAMSUNG || ARCH_EXYNOS || COMPILE_TEST
+ depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
depends on COMMON_CLK
select SND_SOC_GENERIC_DMAENGINE_PCM
---help---
--
2.20.0
^ permalink raw reply related [flat|nested] 18+ messages in thread
* [PATCH 11/36] ARM: s5pv210: split from plat-samsung
2019-10-10 20:29 ` [PATCH 11/36] ARM: s5pv210: split from plat-samsung Arnd Bergmann
@ 2019-10-10 20:29 ` Arnd Bergmann
2019-10-11 5:51 ` Uwe Kleine-König
` (3 subsequent siblings)
4 siblings, 0 replies; 18+ messages in thread
From: Arnd Bergmann @ 2019-10-10 20:29 UTC (permalink / raw)
To: Kukjin Kim, Krzysztof Kozlowski, Ulf Hansson, Thierry Reding,
Mark Brown, Greg Kroah-Hartman, Jiri Slaby, Sangbeom Kim,
Sylwester Nawrocki, Liam Girdwood
Cc: linux-samsung-soc, linux-arm-kernel, linus.walleij,
Arnd Bergmann, Uwe Kleine-König, Jaroslav Kysela,
Takashi Iwai, Olof Johansson, Sascha Hauer,
Clément Péron, Mauro Carvalho Chehab,
Bartlomiej Zolnierkiewicz, Faiz Abbas, linux-kernel, linux-mmc,
linux-pwm, linux-spi, linux-serial, alsa-devel
These can be build completely independently, so split
the two Kconfig symbols.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
arch/arm/Kconfig.debug | 6 +++---
arch/arm/Makefile | 1 -
arch/arm/plat-samsung/Kconfig | 2 +-
drivers/mmc/host/Kconfig | 2 +-
drivers/pwm/Kconfig | 2 +-
drivers/spi/Kconfig | 2 +-
drivers/tty/serial/Kconfig | 2 +-
sound/soc/samsung/Kconfig | 2 +-
8 files changed, 9 insertions(+), 10 deletions(-)
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 9c4f2d6deb06..4c4e97ae4fcb 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -998,7 +998,7 @@ choice
via SCIFA4 on Renesas SH-Mobile AG5 (SH73A0).
config DEBUG_S3C_UART0
- depends on PLAT_SAMSUNG || ARCH_EXYNOS
+ depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS
select DEBUG_EXYNOS_UART if ARCH_EXYNOS
select DEBUG_S3C24XX_UART if ARCH_S3C24XX
select DEBUG_S3C64XX_UART if ARCH_S3C64XX
@@ -1010,7 +1010,7 @@ choice
by the boot-loader before use.
config DEBUG_S3C_UART1
- depends on PLAT_SAMSUNG || ARCH_EXYNOS
+ depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS
select DEBUG_EXYNOS_UART if ARCH_EXYNOS
select DEBUG_S3C24XX_UART if ARCH_S3C24XX
select DEBUG_S3C64XX_UART if ARCH_S3C64XX
@@ -1022,7 +1022,7 @@ choice
by the boot-loader before use.
config DEBUG_S3C_UART2
- depends on PLAT_SAMSUNG || ARCH_EXYNOS
+ depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS
select DEBUG_EXYNOS_UART if ARCH_EXYNOS
select DEBUG_S3C24XX_UART if ARCH_S3C24XX
select DEBUG_S3C64XX_UART if ARCH_S3C64XX
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index f492d7c338fe..a1bc15cda751 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -235,7 +235,6 @@ machine-$(CONFIG_PLAT_SPEAR) += spear
# by CONFIG_* macro name.
plat-$(CONFIG_ARCH_OMAP) += omap
plat-$(CONFIG_ARCH_S3C64XX) += samsung
-plat-$(CONFIG_ARCH_S5PV210) += samsung
plat-$(CONFIG_PLAT_ORION) += orion
plat-$(CONFIG_PLAT_PXA) += pxa
plat-$(CONFIG_PLAT_S3C24XX) += samsung
diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
index 740bdb23f38a..1530946cc672 100644
--- a/arch/arm/plat-samsung/Kconfig
+++ b/arch/arm/plat-samsung/Kconfig
@@ -4,7 +4,7 @@
config PLAT_SAMSUNG
bool
- depends on PLAT_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210
+ depends on PLAT_S3C24XX || ARCH_S3C64XX
default y
select GENERIC_IRQ_CHIP
select NO_IOPORT_MAP
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index 400a581c918c..16a0e5430b44 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -275,7 +275,7 @@ config MMC_SDHCI_TEGRA
config MMC_SDHCI_S3C
tristate "SDHCI support on Samsung S3C SoC"
- depends on MMC_SDHCI && (PLAT_SAMSUNG || ARCH_EXYNOS)
+ depends on MMC_SDHCI && (PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS)
help
This selects the Secure Digital Host Controller Interface (SDHCI)
often referrered to as the HSMMC block in some of the Samsung S3C
diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
index e3a2518503ed..8eb738cac0c7 100644
--- a/drivers/pwm/Kconfig
+++ b/drivers/pwm/Kconfig
@@ -394,7 +394,7 @@ config PWM_ROCKCHIP
config PWM_SAMSUNG
tristate "Samsung PWM support"
- depends on PLAT_SAMSUNG || ARCH_EXYNOS
+ depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS
help
Generic PWM framework driver for Samsung.
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 6f7fdcbb9151..355391ee643d 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -625,7 +625,7 @@ config SPI_S3C24XX_FIQ
config SPI_S3C64XX
tristate "Samsung S3C64XX series type SPI"
- depends on (PLAT_SAMSUNG || ARCH_EXYNOS || COMPILE_TEST)
+ depends on (PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST)
help
SPI driver for Samsung S3C64XX and newer SoCs.
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 4789b5d62f63..17f01cf3009c 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -237,7 +237,7 @@ config SERIAL_CLPS711X_CONSOLE
config SERIAL_SAMSUNG
tristate "Samsung SoC serial support"
- depends on PLAT_SAMSUNG || ARCH_EXYNOS
+ depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS
select SERIAL_CORE
help
Support for the on-chip UARTs on the Samsung S3C24XX series CPUs,
diff --git a/sound/soc/samsung/Kconfig b/sound/soc/samsung/Kconfig
index 638983123d8f..7a0035dd9995 100644
--- a/sound/soc/samsung/Kconfig
+++ b/sound/soc/samsung/Kconfig
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: GPL-2.0-only
menuconfig SND_SOC_SAMSUNG
tristate "ASoC support for Samsung"
- depends on PLAT_SAMSUNG || ARCH_EXYNOS || COMPILE_TEST
+ depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
depends on COMMON_CLK
select SND_SOC_GENERIC_DMAENGINE_PCM
---help---
--
2.20.0
^ permalink raw reply related [flat|nested] 18+ messages in thread
* Re: [PATCH 11/36] ARM: s5pv210: split from plat-samsung
2019-10-10 20:29 ` [PATCH 11/36] ARM: s5pv210: split from plat-samsung Arnd Bergmann
2019-10-10 20:29 ` Arnd Bergmann
@ 2019-10-11 5:51 ` Uwe Kleine-König
2019-10-11 5:51 ` Uwe Kleine-König
2019-10-22 14:01 ` Arnd Bergmann
2019-10-15 14:13 ` Ulf Hansson
` (2 subsequent siblings)
4 siblings, 2 replies; 18+ messages in thread
From: Uwe Kleine-König @ 2019-10-11 5:51 UTC (permalink / raw)
To: Arnd Bergmann
Cc: Ulf Hansson, Liam Girdwood, linus.walleij, alsa-devel,
linux-kernel, Thierry Reding, Sylwester Nawrocki,
Mauro Carvalho Chehab, linux-samsung-soc, Krzysztof Kozlowski,
Kukjin Kim, Clément Péron, linux-serial, Jiri Slaby,
linux-pwm, Bartlomiej Zolnierkiewicz, Sascha Hauer, Mark Brown,
Jaroslav Kysela, linux-arm-kernel, Sangbeom Kim,
Greg Kroah-Hartman, linux-mmc
On Thu, Oct 10, 2019 at 10:29:55PM +0200, Arnd Bergmann wrote:
> These can be build completely independently, so split
> the two Kconfig symbols.
>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
I'd mention the two symbols' names you're working on in the commit log.
I guess it's about PLAT_SAMSUNG and ARCH_S5PV210. And I wouldn't call it
"split" which IMHO suggests there was only one symbol before.
Maybe:
Don't imply PLAT_SAMSUNG if ARCH_S5PV210 is enabled
would be a better subject line?
> ---
> arch/arm/Kconfig.debug | 6 +++---
> arch/arm/Makefile | 1 -
> arch/arm/plat-samsung/Kconfig | 2 +-
> drivers/mmc/host/Kconfig | 2 +-
> drivers/pwm/Kconfig | 2 +-
> drivers/spi/Kconfig | 2 +-
> drivers/tty/serial/Kconfig | 2 +-
> sound/soc/samsung/Kconfig | 2 +-
> 8 files changed, 9 insertions(+), 10 deletions(-)
>
> diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
> index 9c4f2d6deb06..4c4e97ae4fcb 100644
> --- a/arch/arm/Kconfig.debug
> +++ b/arch/arm/Kconfig.debug
> @@ -998,7 +998,7 @@ choice
> via SCIFA4 on Renesas SH-Mobile AG5 (SH73A0).
>
> config DEBUG_S3C_UART0
> - depends on PLAT_SAMSUNG || ARCH_EXYNOS
> + depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS
> select DEBUG_EXYNOS_UART if ARCH_EXYNOS
> select DEBUG_S3C24XX_UART if ARCH_S3C24XX
> select DEBUG_S3C64XX_UART if ARCH_S3C64XX
> @@ -1010,7 +1010,7 @@ choice
> by the boot-loader before use.
>
> config DEBUG_S3C_UART1
> - depends on PLAT_SAMSUNG || ARCH_EXYNOS
> + depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS
> select DEBUG_EXYNOS_UART if ARCH_EXYNOS
> select DEBUG_S3C24XX_UART if ARCH_S3C24XX
> select DEBUG_S3C64XX_UART if ARCH_S3C64XX
> @@ -1022,7 +1022,7 @@ choice
> by the boot-loader before use.
>
> config DEBUG_S3C_UART2
> - depends on PLAT_SAMSUNG || ARCH_EXYNOS
> + depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS
> select DEBUG_EXYNOS_UART if ARCH_EXYNOS
> select DEBUG_S3C24XX_UART if ARCH_S3C24XX
> select DEBUG_S3C64XX_UART if ARCH_S3C64XX
> diff --git a/arch/arm/Makefile b/arch/arm/Makefile
> index f492d7c338fe..a1bc15cda751 100644
> --- a/arch/arm/Makefile
> +++ b/arch/arm/Makefile
> @@ -235,7 +235,6 @@ machine-$(CONFIG_PLAT_SPEAR) += spear
> # by CONFIG_* macro name.
> plat-$(CONFIG_ARCH_OMAP) += omap
> plat-$(CONFIG_ARCH_S3C64XX) += samsung
> -plat-$(CONFIG_ARCH_S5PV210) += samsung
Would it make more sense to make this
plat-$(PLAT_SAMSUNG) += samsung
(in a separate patch)? Hmm, it seems there is no plat-y for
PLAT_S3C24XX=y builds. Is this intended? If yes, the directory name
containing "samsung" suggests something that seems untrue.
Best regards
Uwe
--
Pengutronix e.K. | Uwe Kleine-König |
Industrial Linux Solutions | http://www.pengutronix.de/ |
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH 11/36] ARM: s5pv210: split from plat-samsung
2019-10-11 5:51 ` Uwe Kleine-König
@ 2019-10-11 5:51 ` Uwe Kleine-König
2019-10-22 14:01 ` Arnd Bergmann
1 sibling, 0 replies; 18+ messages in thread
From: Uwe Kleine-König @ 2019-10-11 5:51 UTC (permalink / raw)
To: Arnd Bergmann
Cc: Kukjin Kim, Krzysztof Kozlowski, Ulf Hansson, Thierry Reding,
Mark Brown, Greg Kroah-Hartman, Jiri Slaby, Sangbeom Kim,
Sylwester Nawrocki, Liam Girdwood, linux-samsung-soc,
linux-arm-kernel, linus.walleij, Jaroslav Kysela, Takashi Iwai,
Olof Johansson, Sascha Hauer, Clément Péron,
Mauro Carvalho Chehab, Bartlomiej Zolnierkiewicz, Faiz Abbas,
linux-kernel, linux-mmc, linux-pwm, linux-spi, linux-serial,
alsa-devel
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset="UTF-8", Size: 2885 bytes --]
On Thu, Oct 10, 2019 at 10:29:55PM +0200, Arnd Bergmann wrote:
> These can be build completely independently, so split
> the two Kconfig symbols.
>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
I'd mention the two symbols' names you're working on in the commit log.
I guess it's about PLAT_SAMSUNG and ARCH_S5PV210. And I wouldn't call it
"split" which IMHO suggests there was only one symbol before.
Maybe:
Don't imply PLAT_SAMSUNG if ARCH_S5PV210 is enabled
would be a better subject line?
> ---
> arch/arm/Kconfig.debug | 6 +++---
> arch/arm/Makefile | 1 -
> arch/arm/plat-samsung/Kconfig | 2 +-
> drivers/mmc/host/Kconfig | 2 +-
> drivers/pwm/Kconfig | 2 +-
> drivers/spi/Kconfig | 2 +-
> drivers/tty/serial/Kconfig | 2 +-
> sound/soc/samsung/Kconfig | 2 +-
> 8 files changed, 9 insertions(+), 10 deletions(-)
>
> diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
> index 9c4f2d6deb06..4c4e97ae4fcb 100644
> --- a/arch/arm/Kconfig.debug
> +++ b/arch/arm/Kconfig.debug
> @@ -998,7 +998,7 @@ choice
> via SCIFA4 on Renesas SH-Mobile AG5 (SH73A0).
>
> config DEBUG_S3C_UART0
> - depends on PLAT_SAMSUNG || ARCH_EXYNOS
> + depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS
> select DEBUG_EXYNOS_UART if ARCH_EXYNOS
> select DEBUG_S3C24XX_UART if ARCH_S3C24XX
> select DEBUG_S3C64XX_UART if ARCH_S3C64XX
> @@ -1010,7 +1010,7 @@ choice
> by the boot-loader before use.
>
> config DEBUG_S3C_UART1
> - depends on PLAT_SAMSUNG || ARCH_EXYNOS
> + depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS
> select DEBUG_EXYNOS_UART if ARCH_EXYNOS
> select DEBUG_S3C24XX_UART if ARCH_S3C24XX
> select DEBUG_S3C64XX_UART if ARCH_S3C64XX
> @@ -1022,7 +1022,7 @@ choice
> by the boot-loader before use.
>
> config DEBUG_S3C_UART2
> - depends on PLAT_SAMSUNG || ARCH_EXYNOS
> + depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS
> select DEBUG_EXYNOS_UART if ARCH_EXYNOS
> select DEBUG_S3C24XX_UART if ARCH_S3C24XX
> select DEBUG_S3C64XX_UART if ARCH_S3C64XX
> diff --git a/arch/arm/Makefile b/arch/arm/Makefile
> index f492d7c338fe..a1bc15cda751 100644
> --- a/arch/arm/Makefile
> +++ b/arch/arm/Makefile
> @@ -235,7 +235,6 @@ machine-$(CONFIG_PLAT_SPEAR) += spear
> # by CONFIG_* macro name.
> plat-$(CONFIG_ARCH_OMAP) += omap
> plat-$(CONFIG_ARCH_S3C64XX) += samsung
> -plat-$(CONFIG_ARCH_S5PV210) += samsung
Would it make more sense to make this
plat-$(PLAT_SAMSUNG) += samsung
(in a separate patch)? Hmm, it seems there is no plat-y for
PLAT_S3C24XX=y builds. Is this intended? If yes, the directory name
containing "samsung" suggests something that seems untrue.
Best regards
Uwe
--
Pengutronix e.K. | Uwe Kleine-König |
Industrial Linux Solutions | http://www.pengutronix.de/ |
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH 11/36] ARM: s5pv210: split from plat-samsung
2019-10-10 20:29 ` [PATCH 11/36] ARM: s5pv210: split from plat-samsung Arnd Bergmann
2019-10-10 20:29 ` Arnd Bergmann
2019-10-11 5:51 ` Uwe Kleine-König
@ 2019-10-15 14:13 ` Ulf Hansson
2019-10-15 14:13 ` Ulf Hansson
2019-10-15 14:23 ` Thierry Reding
2019-10-23 12:14 ` Krzysztof Kozlowski
4 siblings, 1 reply; 18+ messages in thread
From: Ulf Hansson @ 2019-10-15 14:13 UTC (permalink / raw)
To: Arnd Bergmann
Cc: Kukjin Kim, Krzysztof Kozlowski, Thierry Reding, Mark Brown,
Greg Kroah-Hartman, Jiri Slaby, Sangbeom Kim, Sylwester Nawrocki,
Liam Girdwood, linux-pwm, alsa-devel, linux-samsung-soc,
Bartlomiej Zolnierkiewicz, Linux Kernel Mailing List,
Linus Walleij, linux-mmc, Takashi Iwai, Jaroslav Kysela,
Mauro Carvalho Chehab
On Thu, 10 Oct 2019 at 22:38, Arnd Bergmann <arnd@arndb.de> wrote:
>
> These can be build completely independently, so split
> the two Kconfig symbols.
>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> ---
> arch/arm/Kconfig.debug | 6 +++---
> arch/arm/Makefile | 1 -
> arch/arm/plat-samsung/Kconfig | 2 +-
> drivers/mmc/host/Kconfig | 2 +-
> drivers/pwm/Kconfig | 2 +-
> drivers/spi/Kconfig | 2 +-
> drivers/tty/serial/Kconfig | 2 +-
> sound/soc/samsung/Kconfig | 2 +-
> 8 files changed, 9 insertions(+), 10 deletions(-)
For the mmc parts:
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Kind regards
Uffe
>
> diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
> index 9c4f2d6deb06..4c4e97ae4fcb 100644
> --- a/arch/arm/Kconfig.debug
> +++ b/arch/arm/Kconfig.debug
> @@ -998,7 +998,7 @@ choice
> via SCIFA4 on Renesas SH-Mobile AG5 (SH73A0).
>
> config DEBUG_S3C_UART0
> - depends on PLAT_SAMSUNG || ARCH_EXYNOS
> + depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS
> select DEBUG_EXYNOS_UART if ARCH_EXYNOS
> select DEBUG_S3C24XX_UART if ARCH_S3C24XX
> select DEBUG_S3C64XX_UART if ARCH_S3C64XX
> @@ -1010,7 +1010,7 @@ choice
> by the boot-loader before use.
>
> config DEBUG_S3C_UART1
> - depends on PLAT_SAMSUNG || ARCH_EXYNOS
> + depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS
> select DEBUG_EXYNOS_UART if ARCH_EXYNOS
> select DEBUG_S3C24XX_UART if ARCH_S3C24XX
> select DEBUG_S3C64XX_UART if ARCH_S3C64XX
> @@ -1022,7 +1022,7 @@ choice
> by the boot-loader before use.
>
> config DEBUG_S3C_UART2
> - depends on PLAT_SAMSUNG || ARCH_EXYNOS
> + depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS
> select DEBUG_EXYNOS_UART if ARCH_EXYNOS
> select DEBUG_S3C24XX_UART if ARCH_S3C24XX
> select DEBUG_S3C64XX_UART if ARCH_S3C64XX
> diff --git a/arch/arm/Makefile b/arch/arm/Makefile
> index f492d7c338fe..a1bc15cda751 100644
> --- a/arch/arm/Makefile
> +++ b/arch/arm/Makefile
> @@ -235,7 +235,6 @@ machine-$(CONFIG_PLAT_SPEAR) += spear
> # by CONFIG_* macro name.
> plat-$(CONFIG_ARCH_OMAP) += omap
> plat-$(CONFIG_ARCH_S3C64XX) += samsung
> -plat-$(CONFIG_ARCH_S5PV210) += samsung
> plat-$(CONFIG_PLAT_ORION) += orion
> plat-$(CONFIG_PLAT_PXA) += pxa
> plat-$(CONFIG_PLAT_S3C24XX) += samsung
> diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
> index 740bdb23f38a..1530946cc672 100644
> --- a/arch/arm/plat-samsung/Kconfig
> +++ b/arch/arm/plat-samsung/Kconfig
> @@ -4,7 +4,7 @@
>
> config PLAT_SAMSUNG
> bool
> - depends on PLAT_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210
> + depends on PLAT_S3C24XX || ARCH_S3C64XX
> default y
> select GENERIC_IRQ_CHIP
> select NO_IOPORT_MAP
> diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
> index 400a581c918c..16a0e5430b44 100644
> --- a/drivers/mmc/host/Kconfig
> +++ b/drivers/mmc/host/Kconfig
> @@ -275,7 +275,7 @@ config MMC_SDHCI_TEGRA
>
> config MMC_SDHCI_S3C
> tristate "SDHCI support on Samsung S3C SoC"
> - depends on MMC_SDHCI && (PLAT_SAMSUNG || ARCH_EXYNOS)
> + depends on MMC_SDHCI && (PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS)
> help
> This selects the Secure Digital Host Controller Interface (SDHCI)
> often referrered to as the HSMMC block in some of the Samsung S3C
> diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
> index e3a2518503ed..8eb738cac0c7 100644
> --- a/drivers/pwm/Kconfig
> +++ b/drivers/pwm/Kconfig
> @@ -394,7 +394,7 @@ config PWM_ROCKCHIP
>
> config PWM_SAMSUNG
> tristate "Samsung PWM support"
> - depends on PLAT_SAMSUNG || ARCH_EXYNOS
> + depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS
> help
> Generic PWM framework driver for Samsung.
>
> diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
> index 6f7fdcbb9151..355391ee643d 100644
> --- a/drivers/spi/Kconfig
> +++ b/drivers/spi/Kconfig
> @@ -625,7 +625,7 @@ config SPI_S3C24XX_FIQ
>
> config SPI_S3C64XX
> tristate "Samsung S3C64XX series type SPI"
> - depends on (PLAT_SAMSUNG || ARCH_EXYNOS || COMPILE_TEST)
> + depends on (PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST)
> help
> SPI driver for Samsung S3C64XX and newer SoCs.
>
> diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
> index 4789b5d62f63..17f01cf3009c 100644
> --- a/drivers/tty/serial/Kconfig
> +++ b/drivers/tty/serial/Kconfig
> @@ -237,7 +237,7 @@ config SERIAL_CLPS711X_CONSOLE
>
> config SERIAL_SAMSUNG
> tristate "Samsung SoC serial support"
> - depends on PLAT_SAMSUNG || ARCH_EXYNOS
> + depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS
> select SERIAL_CORE
> help
> Support for the on-chip UARTs on the Samsung S3C24XX series CPUs,
> diff --git a/sound/soc/samsung/Kconfig b/sound/soc/samsung/Kconfig
> index 638983123d8f..7a0035dd9995 100644
> --- a/sound/soc/samsung/Kconfig
> +++ b/sound/soc/samsung/Kconfig
> @@ -1,7 +1,7 @@
> # SPDX-License-Identifier: GPL-2.0-only
> menuconfig SND_SOC_SAMSUNG
> tristate "ASoC support for Samsung"
> - depends on PLAT_SAMSUNG || ARCH_EXYNOS || COMPILE_TEST
> + depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
> depends on COMMON_CLK
> select SND_SOC_GENERIC_DMAENGINE_PCM
> ---help---
> --
> 2.20.0
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH 11/36] ARM: s5pv210: split from plat-samsung
2019-10-15 14:13 ` Ulf Hansson
@ 2019-10-15 14:13 ` Ulf Hansson
0 siblings, 0 replies; 18+ messages in thread
From: Ulf Hansson @ 2019-10-15 14:13 UTC (permalink / raw)
To: Arnd Bergmann
Cc: Kukjin Kim, Krzysztof Kozlowski, Thierry Reding, Mark Brown,
Greg Kroah-Hartman, Jiri Slaby, Sangbeom Kim, Sylwester Nawrocki,
Liam Girdwood, linux-pwm, alsa-devel, linux-samsung-soc,
Bartlomiej Zolnierkiewicz, Linux Kernel Mailing List,
Linus Walleij, linux-mmc, Takashi Iwai, Jaroslav Kysela,
Mauro Carvalho Chehab, Faiz Abbas, Clément Péron,
linux-serial, Uwe Kleine-König, Olof Johansson, linux-spi,
Sascha Hauer, Linux ARM
On Thu, 10 Oct 2019 at 22:38, Arnd Bergmann <arnd@arndb.de> wrote:
>
> These can be build completely independently, so split
> the two Kconfig symbols.
>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> ---
> arch/arm/Kconfig.debug | 6 +++---
> arch/arm/Makefile | 1 -
> arch/arm/plat-samsung/Kconfig | 2 +-
> drivers/mmc/host/Kconfig | 2 +-
> drivers/pwm/Kconfig | 2 +-
> drivers/spi/Kconfig | 2 +-
> drivers/tty/serial/Kconfig | 2 +-
> sound/soc/samsung/Kconfig | 2 +-
> 8 files changed, 9 insertions(+), 10 deletions(-)
For the mmc parts:
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Kind regards
Uffe
>
> diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
> index 9c4f2d6deb06..4c4e97ae4fcb 100644
> --- a/arch/arm/Kconfig.debug
> +++ b/arch/arm/Kconfig.debug
> @@ -998,7 +998,7 @@ choice
> via SCIFA4 on Renesas SH-Mobile AG5 (SH73A0).
>
> config DEBUG_S3C_UART0
> - depends on PLAT_SAMSUNG || ARCH_EXYNOS
> + depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS
> select DEBUG_EXYNOS_UART if ARCH_EXYNOS
> select DEBUG_S3C24XX_UART if ARCH_S3C24XX
> select DEBUG_S3C64XX_UART if ARCH_S3C64XX
> @@ -1010,7 +1010,7 @@ choice
> by the boot-loader before use.
>
> config DEBUG_S3C_UART1
> - depends on PLAT_SAMSUNG || ARCH_EXYNOS
> + depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS
> select DEBUG_EXYNOS_UART if ARCH_EXYNOS
> select DEBUG_S3C24XX_UART if ARCH_S3C24XX
> select DEBUG_S3C64XX_UART if ARCH_S3C64XX
> @@ -1022,7 +1022,7 @@ choice
> by the boot-loader before use.
>
> config DEBUG_S3C_UART2
> - depends on PLAT_SAMSUNG || ARCH_EXYNOS
> + depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS
> select DEBUG_EXYNOS_UART if ARCH_EXYNOS
> select DEBUG_S3C24XX_UART if ARCH_S3C24XX
> select DEBUG_S3C64XX_UART if ARCH_S3C64XX
> diff --git a/arch/arm/Makefile b/arch/arm/Makefile
> index f492d7c338fe..a1bc15cda751 100644
> --- a/arch/arm/Makefile
> +++ b/arch/arm/Makefile
> @@ -235,7 +235,6 @@ machine-$(CONFIG_PLAT_SPEAR) += spear
> # by CONFIG_* macro name.
> plat-$(CONFIG_ARCH_OMAP) += omap
> plat-$(CONFIG_ARCH_S3C64XX) += samsung
> -plat-$(CONFIG_ARCH_S5PV210) += samsung
> plat-$(CONFIG_PLAT_ORION) += orion
> plat-$(CONFIG_PLAT_PXA) += pxa
> plat-$(CONFIG_PLAT_S3C24XX) += samsung
> diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
> index 740bdb23f38a..1530946cc672 100644
> --- a/arch/arm/plat-samsung/Kconfig
> +++ b/arch/arm/plat-samsung/Kconfig
> @@ -4,7 +4,7 @@
>
> config PLAT_SAMSUNG
> bool
> - depends on PLAT_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210
> + depends on PLAT_S3C24XX || ARCH_S3C64XX
> default y
> select GENERIC_IRQ_CHIP
> select NO_IOPORT_MAP
> diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
> index 400a581c918c..16a0e5430b44 100644
> --- a/drivers/mmc/host/Kconfig
> +++ b/drivers/mmc/host/Kconfig
> @@ -275,7 +275,7 @@ config MMC_SDHCI_TEGRA
>
> config MMC_SDHCI_S3C
> tristate "SDHCI support on Samsung S3C SoC"
> - depends on MMC_SDHCI && (PLAT_SAMSUNG || ARCH_EXYNOS)
> + depends on MMC_SDHCI && (PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS)
> help
> This selects the Secure Digital Host Controller Interface (SDHCI)
> often referrered to as the HSMMC block in some of the Samsung S3C
> diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
> index e3a2518503ed..8eb738cac0c7 100644
> --- a/drivers/pwm/Kconfig
> +++ b/drivers/pwm/Kconfig
> @@ -394,7 +394,7 @@ config PWM_ROCKCHIP
>
> config PWM_SAMSUNG
> tristate "Samsung PWM support"
> - depends on PLAT_SAMSUNG || ARCH_EXYNOS
> + depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS
> help
> Generic PWM framework driver for Samsung.
>
> diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
> index 6f7fdcbb9151..355391ee643d 100644
> --- a/drivers/spi/Kconfig
> +++ b/drivers/spi/Kconfig
> @@ -625,7 +625,7 @@ config SPI_S3C24XX_FIQ
>
> config SPI_S3C64XX
> tristate "Samsung S3C64XX series type SPI"
> - depends on (PLAT_SAMSUNG || ARCH_EXYNOS || COMPILE_TEST)
> + depends on (PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST)
> help
> SPI driver for Samsung S3C64XX and newer SoCs.
>
> diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
> index 4789b5d62f63..17f01cf3009c 100644
> --- a/drivers/tty/serial/Kconfig
> +++ b/drivers/tty/serial/Kconfig
> @@ -237,7 +237,7 @@ config SERIAL_CLPS711X_CONSOLE
>
> config SERIAL_SAMSUNG
> tristate "Samsung SoC serial support"
> - depends on PLAT_SAMSUNG || ARCH_EXYNOS
> + depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS
> select SERIAL_CORE
> help
> Support for the on-chip UARTs on the Samsung S3C24XX series CPUs,
> diff --git a/sound/soc/samsung/Kconfig b/sound/soc/samsung/Kconfig
> index 638983123d8f..7a0035dd9995 100644
> --- a/sound/soc/samsung/Kconfig
> +++ b/sound/soc/samsung/Kconfig
> @@ -1,7 +1,7 @@
> # SPDX-License-Identifier: GPL-2.0-only
> menuconfig SND_SOC_SAMSUNG
> tristate "ASoC support for Samsung"
> - depends on PLAT_SAMSUNG || ARCH_EXYNOS || COMPILE_TEST
> + depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
> depends on COMMON_CLK
> select SND_SOC_GENERIC_DMAENGINE_PCM
> ---help---
> --
> 2.20.0
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH 11/36] ARM: s5pv210: split from plat-samsung
2019-10-10 20:29 ` [PATCH 11/36] ARM: s5pv210: split from plat-samsung Arnd Bergmann
` (2 preceding siblings ...)
2019-10-15 14:13 ` Ulf Hansson
@ 2019-10-15 14:23 ` Thierry Reding
2019-10-15 14:23 ` Thierry Reding
2019-10-23 12:14 ` Krzysztof Kozlowski
4 siblings, 1 reply; 18+ messages in thread
From: Thierry Reding @ 2019-10-15 14:23 UTC (permalink / raw)
To: Arnd Bergmann
Cc: Kukjin Kim, Krzysztof Kozlowski, Ulf Hansson, Mark Brown,
Greg Kroah-Hartman, Jiri Slaby, Sangbeom Kim, Sylwester Nawrocki,
Liam Girdwood, linux-samsung-soc, linux-arm-kernel,
linus.walleij, Uwe Kleine-König, Jaroslav Kysela,
Takashi Iwai, Olof Johansson, Sascha Hauer,
Clément Péron, Mauro Carvalho Chehab
[-- Attachment #1: Type: text/plain, Size: 560 bytes --]
On Thu, Oct 10, 2019 at 10:29:55PM +0200, Arnd Bergmann wrote:
[...]
> diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
> index e3a2518503ed..8eb738cac0c7 100644
> --- a/drivers/pwm/Kconfig
> +++ b/drivers/pwm/Kconfig
> @@ -394,7 +394,7 @@ config PWM_ROCKCHIP
>
> config PWM_SAMSUNG
> tristate "Samsung PWM support"
> - depends on PLAT_SAMSUNG || ARCH_EXYNOS
> + depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS
> help
> Generic PWM framework driver for Samsung.
>
Acked-by: Thierry Reding <thierry.reding@gmail.com>
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH 11/36] ARM: s5pv210: split from plat-samsung
2019-10-15 14:23 ` Thierry Reding
@ 2019-10-15 14:23 ` Thierry Reding
0 siblings, 0 replies; 18+ messages in thread
From: Thierry Reding @ 2019-10-15 14:23 UTC (permalink / raw)
To: Arnd Bergmann
Cc: Kukjin Kim, Krzysztof Kozlowski, Ulf Hansson, Mark Brown,
Greg Kroah-Hartman, Jiri Slaby, Sangbeom Kim, Sylwester Nawrocki,
Liam Girdwood, linux-samsung-soc, linux-arm-kernel,
linus.walleij, Uwe Kleine-König, Jaroslav Kysela,
Takashi Iwai, Olof Johansson, Sascha Hauer,
Clément Péron, Mauro Carvalho Chehab,
Bartlomiej Zolnierkiewicz, Faiz Abbas, linux-kernel, linux-mmc,
linux-pwm, linux-spi, linux-serial, alsa-devel
[-- Attachment #1: Type: text/plain, Size: 560 bytes --]
On Thu, Oct 10, 2019 at 10:29:55PM +0200, Arnd Bergmann wrote:
[...]
> diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
> index e3a2518503ed..8eb738cac0c7 100644
> --- a/drivers/pwm/Kconfig
> +++ b/drivers/pwm/Kconfig
> @@ -394,7 +394,7 @@ config PWM_ROCKCHIP
>
> config PWM_SAMSUNG
> tristate "Samsung PWM support"
> - depends on PLAT_SAMSUNG || ARCH_EXYNOS
> + depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS
> help
> Generic PWM framework driver for Samsung.
>
Acked-by: Thierry Reding <thierry.reding@gmail.com>
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH 11/36] ARM: s5pv210: split from plat-samsung
2019-10-11 5:51 ` Uwe Kleine-König
2019-10-11 5:51 ` Uwe Kleine-König
@ 2019-10-22 14:01 ` Arnd Bergmann
2019-10-22 15:53 ` Uwe Kleine-König
1 sibling, 1 reply; 18+ messages in thread
From: Arnd Bergmann @ 2019-10-22 14:01 UTC (permalink / raw)
To: Uwe Kleine-König
Cc: Kukjin Kim, Krzysztof Kozlowski, Ulf Hansson, Thierry Reding,
Mark Brown, Greg Kroah-Hartman, Jiri Slaby, Sangbeom Kim,
Sylwester Nawrocki, Liam Girdwood,
moderated list:ARM/SAMSUNG EXYNOS ARM ARCHITECTURES, Linux ARM,
Linus Walleij, Jaroslav Kysela, Takashi Iwai, Olof Johansson,
Sascha Hauer, Clément Péron, Mauro Carvalho Chehab,
Bartlomiej Zolnierkiewicz, Faiz Abbas, linux-kernel, linux-mmc,
Linux PWM List, linux-spi, linux-serial,
ALSA Development Mailing List
On Fri, Oct 11, 2019 at 7:51 AM Uwe Kleine-König
<u.kleine-koenig@pengutronix.de> wrote:
>
> On Thu, Oct 10, 2019 at 10:29:55PM +0200, Arnd Bergmann wrote:
> > These can be build completely independently, so split
> > the two Kconfig symbols.
> >
> > Signed-off-by: Arnd Bergmann <arnd@arndb.de>
>
> I'd mention the two symbols' names you're working on in the commit log.
> I guess it's about PLAT_SAMSUNG and ARCH_S5PV210. And I wouldn't call it
> "split" which IMHO suggests there was only one symbol before.
>
> Maybe:
>
> Don't imply PLAT_SAMSUNG if ARCH_S5PV210 is enabled
>
> would be a better subject line?
Ok, changed to
ARM: s5pv210: don't imply CONFIG_PLAT_SAMSUNG
> > @@ -235,7 +235,6 @@ machine-$(CONFIG_PLAT_SPEAR) += spear
> > # by CONFIG_* macro name.
> > plat-$(CONFIG_ARCH_OMAP) += omap
> > plat-$(CONFIG_ARCH_S3C64XX) += samsung
> > -plat-$(CONFIG_ARCH_S5PV210) += samsung
>
> Would it make more sense to make this
>
> plat-$(PLAT_SAMSUNG) += samsung
>
> (in a separate patch)? Hmm, it seems there is no plat-y for
> PLAT_S3C24XX=y builds. Is this intended? If yes, the directory name
> containing "samsung" suggests something that seems untrue.
By the end of the series, the plat-samsung directory is completely
removed (folded into mach-s3c), so that would only add more
churn for the same result I think.
Arnd
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH 11/36] ARM: s5pv210: split from plat-samsung
2019-10-22 14:01 ` Arnd Bergmann
@ 2019-10-22 15:53 ` Uwe Kleine-König
2019-10-22 16:20 ` Arnd Bergmann
0 siblings, 1 reply; 18+ messages in thread
From: Uwe Kleine-König @ 2019-10-22 15:53 UTC (permalink / raw)
To: Arnd Bergmann
Cc: Kukjin Kim, Krzysztof Kozlowski, Ulf Hansson, Thierry Reding,
Mark Brown, Greg Kroah-Hartman, Jiri Slaby, Sangbeom Kim,
Sylwester Nawrocki, Liam Girdwood,
moderated list:ARM/SAMSUNG EXYNOS ARM ARCHITECTURES, Linux ARM,
Linus Walleij, Jaroslav Kysela, Takashi Iwai, Olof Johansson,
Sascha Hauer, Clément Péron, Mauro Carvalho Chehab,
Bartlomiej Zolnierkiewicz, Faiz Abbas, linux-kernel, linux-mmc,
Linux PWM List, linux-spi, linux-serial,
ALSA Development Mailing List
Hello,
On Tue, Oct 22, 2019 at 04:01:12PM +0200, Arnd Bergmann wrote:
> > > @@ -235,7 +235,6 @@ machine-$(CONFIG_PLAT_SPEAR) += spear
> > > # by CONFIG_* macro name.
> > > plat-$(CONFIG_ARCH_OMAP) += omap
> > > plat-$(CONFIG_ARCH_S3C64XX) += samsung
> > > -plat-$(CONFIG_ARCH_S5PV210) += samsung
> >
> > Would it make more sense to make this
> >
> > plat-$(PLAT_SAMSUNG) += samsung
> >
> > (in a separate patch)? Hmm, it seems there is no plat-y for
> > PLAT_S3C24XX=y builds. Is this intended? If yes, the directory name
> > containing "samsung" suggests something that seems untrue.
>
> By the end of the series, the plat-samsung directory is completely
> removed (folded into mach-s3c), so that would only add more
> churn for the same result I think.
fine for me. The background of my question was me wondering if builds
for PLAT_S3C24XX=y (before your patch series) don't need plat-samsung.
Best regards
Uwe
--
Pengutronix e.K. | Uwe Kleine-König |
Industrial Linux Solutions | http://www.pengutronix.de/ |
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH 11/36] ARM: s5pv210: split from plat-samsung
2019-10-22 15:53 ` Uwe Kleine-König
@ 2019-10-22 16:20 ` Arnd Bergmann
0 siblings, 0 replies; 18+ messages in thread
From: Arnd Bergmann @ 2019-10-22 16:20 UTC (permalink / raw)
To: Uwe Kleine-König
Cc: Kukjin Kim, Krzysztof Kozlowski, Ulf Hansson, Thierry Reding,
Mark Brown, Greg Kroah-Hartman, Jiri Slaby, Sangbeom Kim,
Sylwester Nawrocki, Liam Girdwood,
moderated list:ARM/SAMSUNG EXYNOS ARM ARCHITECTURES, Linux ARM,
Linus Walleij, Jaroslav Kysela, Takashi Iwai, Olof Johansson,
Sascha Hauer, Clément Péron, Mauro Carvalho Chehab,
Bartlomiej Zolnierkiewicz, Faiz Abbas, linux-kernel, linux-mmc,
Linux PWM List, linux-spi, linux-serial,
ALSA Development Mailing List
On Tue, Oct 22, 2019 at 5:53 PM Uwe Kleine-König
<u.kleine-koenig@pengutronix.de> wrote:
> The background of my question was me wondering if builds
> for PLAT_S3C24XX=y (before your patch series) don't need plat-samsung.
What I found is that the DT-based platforms (exynos and s5p) need almost nothing
from plat-samsung, while the board files and the s3c24xx/s3c64xx power
management
needs almost all of it.
Arnd
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH 11/36] ARM: s5pv210: split from plat-samsung
2019-10-10 20:29 ` [PATCH 11/36] ARM: s5pv210: split from plat-samsung Arnd Bergmann
` (3 preceding siblings ...)
2019-10-15 14:23 ` Thierry Reding
@ 2019-10-23 12:14 ` Krzysztof Kozlowski
2019-10-23 13:17 ` Arnd Bergmann
4 siblings, 1 reply; 18+ messages in thread
From: Krzysztof Kozlowski @ 2019-10-23 12:14 UTC (permalink / raw)
To: Arnd Bergmann
Cc: Kukjin Kim, Ulf Hansson, Thierry Reding, Mark Brown,
Greg Kroah-Hartman, Jiri Slaby, Sangbeom Kim, Sylwester Nawrocki,
Liam Girdwood, linux-samsung-soc, linux-arm-kernel,
linus.walleij, Uwe Kleine-König, Jaroslav Kysela,
Takashi Iwai, Olof Johansson, Sascha Hauer,
Clément Péron, Mauro Carvalho Chehab,
Bartlomiej Zolnierkiewicz, Faiz Abbas, linux-kernel, linux-mmc,
linux-pwm, linux-spi, linux-serial, alsa-devel
On Thu, Oct 10, 2019 at 10:29:55PM +0200, Arnd Bergmann wrote:
> These can be build completely independently, so split
> the two Kconfig symbols.
>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> ---
> arch/arm/Kconfig.debug | 6 +++---
> arch/arm/Makefile | 1 -
> arch/arm/plat-samsung/Kconfig | 2 +-
> drivers/mmc/host/Kconfig | 2 +-
> drivers/pwm/Kconfig | 2 +-
> drivers/spi/Kconfig | 2 +-
> drivers/tty/serial/Kconfig | 2 +-
> sound/soc/samsung/Kconfig | 2 +-
> 8 files changed, 9 insertions(+), 10 deletions(-)
>
> diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
> index 9c4f2d6deb06..4c4e97ae4fcb 100644
> --- a/arch/arm/Kconfig.debug
> +++ b/arch/arm/Kconfig.debug
> @@ -998,7 +998,7 @@ choice
> via SCIFA4 on Renesas SH-Mobile AG5 (SH73A0).
>
> config DEBUG_S3C_UART0
> - depends on PLAT_SAMSUNG || ARCH_EXYNOS
> + depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS
How are you going to select DEBUG_S5PV210_UART now?
Best regards,
Krzysztof
> select DEBUG_EXYNOS_UART if ARCH_EXYNOS
> select DEBUG_S3C24XX_UART if ARCH_S3C24XX
> select DEBUG_S3C64XX_UART if ARCH_S3C64XX
> @@ -1010,7 +1010,7 @@ choice
> by the boot-loader before use.
>
> config DEBUG_S3C_UART1
> - depends on PLAT_SAMSUNG || ARCH_EXYNOS
> + depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS
> select DEBUG_EXYNOS_UART if ARCH_EXYNOS
> select DEBUG_S3C24XX_UART if ARCH_S3C24XX
> select DEBUG_S3C64XX_UART if ARCH_S3C64XX
> @@ -1022,7 +1022,7 @@ choice
> by the boot-loader before use.
>
> config DEBUG_S3C_UART2
> - depends on PLAT_SAMSUNG || ARCH_EXYNOS
> + depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS
> select DEBUG_EXYNOS_UART if ARCH_EXYNOS
> select DEBUG_S3C24XX_UART if ARCH_S3C24XX
> select DEBUG_S3C64XX_UART if ARCH_S3C64XX
> diff --git a/arch/arm/Makefile b/arch/arm/Makefile
> index f492d7c338fe..a1bc15cda751 100644
> --- a/arch/arm/Makefile
> +++ b/arch/arm/Makefile
> @@ -235,7 +235,6 @@ machine-$(CONFIG_PLAT_SPEAR) += spear
> # by CONFIG_* macro name.
> plat-$(CONFIG_ARCH_OMAP) += omap
> plat-$(CONFIG_ARCH_S3C64XX) += samsung
> -plat-$(CONFIG_ARCH_S5PV210) += samsung
> plat-$(CONFIG_PLAT_ORION) += orion
> plat-$(CONFIG_PLAT_PXA) += pxa
> plat-$(CONFIG_PLAT_S3C24XX) += samsung
> diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
> index 740bdb23f38a..1530946cc672 100644
> --- a/arch/arm/plat-samsung/Kconfig
> +++ b/arch/arm/plat-samsung/Kconfig
> @@ -4,7 +4,7 @@
>
> config PLAT_SAMSUNG
> bool
> - depends on PLAT_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210
> + depends on PLAT_S3C24XX || ARCH_S3C64XX
> default y
> select GENERIC_IRQ_CHIP
> select NO_IOPORT_MAP
> diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
> index 400a581c918c..16a0e5430b44 100644
> --- a/drivers/mmc/host/Kconfig
> +++ b/drivers/mmc/host/Kconfig
> @@ -275,7 +275,7 @@ config MMC_SDHCI_TEGRA
>
> config MMC_SDHCI_S3C
> tristate "SDHCI support on Samsung S3C SoC"
> - depends on MMC_SDHCI && (PLAT_SAMSUNG || ARCH_EXYNOS)
> + depends on MMC_SDHCI && (PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS)
> help
> This selects the Secure Digital Host Controller Interface (SDHCI)
> often referrered to as the HSMMC block in some of the Samsung S3C
> diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
> index e3a2518503ed..8eb738cac0c7 100644
> --- a/drivers/pwm/Kconfig
> +++ b/drivers/pwm/Kconfig
> @@ -394,7 +394,7 @@ config PWM_ROCKCHIP
>
> config PWM_SAMSUNG
> tristate "Samsung PWM support"
> - depends on PLAT_SAMSUNG || ARCH_EXYNOS
> + depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS
> help
> Generic PWM framework driver for Samsung.
>
> diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
> index 6f7fdcbb9151..355391ee643d 100644
> --- a/drivers/spi/Kconfig
> +++ b/drivers/spi/Kconfig
> @@ -625,7 +625,7 @@ config SPI_S3C24XX_FIQ
>
> config SPI_S3C64XX
> tristate "Samsung S3C64XX series type SPI"
> - depends on (PLAT_SAMSUNG || ARCH_EXYNOS || COMPILE_TEST)
> + depends on (PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST)
> help
> SPI driver for Samsung S3C64XX and newer SoCs.
>
> diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
> index 4789b5d62f63..17f01cf3009c 100644
> --- a/drivers/tty/serial/Kconfig
> +++ b/drivers/tty/serial/Kconfig
> @@ -237,7 +237,7 @@ config SERIAL_CLPS711X_CONSOLE
>
> config SERIAL_SAMSUNG
> tristate "Samsung SoC serial support"
> - depends on PLAT_SAMSUNG || ARCH_EXYNOS
> + depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS
> select SERIAL_CORE
> help
> Support for the on-chip UARTs on the Samsung S3C24XX series CPUs,
> diff --git a/sound/soc/samsung/Kconfig b/sound/soc/samsung/Kconfig
> index 638983123d8f..7a0035dd9995 100644
> --- a/sound/soc/samsung/Kconfig
> +++ b/sound/soc/samsung/Kconfig
> @@ -1,7 +1,7 @@
> # SPDX-License-Identifier: GPL-2.0-only
> menuconfig SND_SOC_SAMSUNG
> tristate "ASoC support for Samsung"
> - depends on PLAT_SAMSUNG || ARCH_EXYNOS || COMPILE_TEST
> + depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
> depends on COMMON_CLK
> select SND_SOC_GENERIC_DMAENGINE_PCM
> ---help---
> --
> 2.20.0
>
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH 00/36] ARM: samsung platform cleanup
2019-10-10 20:28 [PATCH 00/36] ARM: samsung platform cleanup Arnd Bergmann
2019-10-10 20:28 ` Arnd Bergmann
[not found] ` <20191010203043.1241612-1-arnd@arndb.de>
@ 2019-10-23 13:10 ` Krzysztof Kozlowski
2019-10-23 13:39 ` Arnd Bergmann
2 siblings, 1 reply; 18+ messages in thread
From: Krzysztof Kozlowski @ 2019-10-23 13:10 UTC (permalink / raw)
To: Arnd Bergmann
Cc: Kukjin Kim, linux-samsung-soc, linux-arm-kernel, linux-kernel,
linux-pm, patches, linux-stm32, linux-clk, linux-hwmon,
linux-input, linux-leds, linux-mmc, linux-pwm, linux-spi,
linux-serial, linux-usb, dri-devel, linux-fbdev, alsa-devel,
Lihua Yao, Paweł Chmiel, Lihua Yao, Sergio Prado,
Sylwester Nawrocki
On Thu, Oct 10, 2019 at 10:28:02PM +0200, Arnd Bergmann wrote:
> I've spent some time looking at the remaining ARMv4/ARMv5 platforms
> that are not part of ARCH_MULTIPLATFORM, and tried to get them closer
> to that. Here is what came out of that for the samsung platforms:
>
> * Exynos and s5pv210 are made independent of plat-samsung
> * device drivers stop using mach/*.h headers for s3c24xx
> (and other platforms not in this series)
> * s3c24xx and s3c64xx get merged into mach-s3c, removing
> the need for plat-samsung (I have other patches for the
> remaining plat-* directories)
> * mach/io.h gets cleaned up to only be needed for BAST
> PC104 mode (looking for ideas to proceed)
> * mach/irqs.h remains for now, this still needs to be converted
> to sparse IRQs.
>
> Some bits are a little ugly, but overall I think this a big
> improvement.
>
> The contents are available for testing in
>
> git://kernel.org:/pub/scm/linux/kernel/git/arnd/playground.git s3c-multiplatform
When sending v2, can you Cc:
Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Lihua Yao <ylhuajnu@outlook.com>
(or Lihua Yao <ylhuajnu@163.com> if outlook.com bounces)
Sergio Prado <sergio.prado@e-labworks.com>
Sylwester Nawrocki <s.nawrocki@samsung.com>
These are folks which to my knowledge had working S3C and S5P boards
so maybe they could provide testing.
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH 11/36] ARM: s5pv210: split from plat-samsung
2019-10-23 12:14 ` Krzysztof Kozlowski
@ 2019-10-23 13:17 ` Arnd Bergmann
2019-10-23 14:12 ` Krzysztof Kozlowski
0 siblings, 1 reply; 18+ messages in thread
From: Arnd Bergmann @ 2019-10-23 13:17 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: Kukjin Kim, Ulf Hansson, Thierry Reding, Mark Brown,
Greg Kroah-Hartman, Jiri Slaby, Sangbeom Kim, Sylwester Nawrocki,
Liam Girdwood,
moderated list:ARM/SAMSUNG EXYNOS ARM ARCHITECTURES, Linux ARM,
Linus Walleij, Uwe Kleine-König, Jaroslav Kysela,
Takashi Iwai, Olof Johansson, Sascha Hauer,
Clément Péron, Mauro Carvalho Chehab,
Bartlomiej Zolnierkiewicz, Faiz Abbas, linux-kernel, linux-mmc,
Linux PWM List, linux-spi, linux-serial,
ALSA Development Mailing List
On Wed, Oct 23, 2019 at 2:15 PM Krzysztof Kozlowski <krzk@kernel.org> wrote:
> On Thu, Oct 10, 2019 at 10:29:55PM +0200, Arnd Bergmann wrote:
> > These can be build completely independently, so split
> > the two Kconfig symbols.
> > config DEBUG_S3C_UART0
> > - depends on PLAT_SAMSUNG || ARCH_EXYNOS
> > + depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS
>
> How are you going to select DEBUG_S5PV210_UART now?
I don't see a problem here, the patch should not change the behavior at all.
The whole entry now looks like:
config DEBUG_S3C_UART0
depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS
select DEBUG_EXYNOS_UART if ARCH_EXYNOS
select DEBUG_S3C24XX_UART if ARCH_S3C24XX
select DEBUG_S3C64XX_UART if ARCH_S3C64XX
select DEBUG_S5PV210_UART if ARCH_S5PV210
bool "Use Samsung S3C UART 0 for low-level debug"
so this will work as before with any of ARCH_EXYNOS, ARCH_S3C24XX,
ARCH_S3C64XX and ARCH_S5PV210.
What am I missing?
Arnd
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH 00/36] ARM: samsung platform cleanup
2019-10-23 13:10 ` [PATCH 00/36] ARM: samsung platform cleanup Krzysztof Kozlowski
@ 2019-10-23 13:39 ` Arnd Bergmann
0 siblings, 0 replies; 18+ messages in thread
From: Arnd Bergmann @ 2019-10-23 13:39 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: Linux Fbdev development list, ALSA Development Mailing List,
dri-devel, Sylwester Nawrocki, linux-clk, linux-leds,
moderated list:ARM/SAMSUNG EXYNOS ARM ARCHITECTURES, linux-stm32,
Lihua Yao, Kukjin Kim, linux-serial, open list:HID CORE LAYER,
Paweł Chmiel, Linux PWM List, Sergio Prado, Linux PM list,
Lihua Yao, Linux ARM, linux-hwmon, patches, USB list, linux-mmc,
linux-kernel, linux-spi
On Wed, Oct 23, 2019 at 3:11 PM Krzysztof Kozlowski <krzk@kernel.org> wrote:
> On Thu, Oct 10, 2019 at 10:28:02PM +0200, Arnd Bergmann wrote:
> > The contents are available for testing in
> >
> > git://kernel.org:/pub/scm/linux/kernel/git/arnd/playground.git s3c-multiplatform
>
> When sending v2, can you Cc:
>
> Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
> Lihua Yao <ylhuajnu@outlook.com>
> (or Lihua Yao <ylhuajnu@163.com> if outlook.com bounces)
> Sergio Prado <sergio.prado@e-labworks.com>
> Sylwester Nawrocki <s.nawrocki@samsung.com>
>
> These are folks which to my knowledge had working S3C and S5P boards
> so maybe they could provide testing.
Ok, will do. I've uploaded the modified version based on your comments to
the above URL for now.
I'll probably give it a little more time before resending, but they
could already
start testing that version.
Thanks a lot for the review!
Arnd
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH 11/36] ARM: s5pv210: split from plat-samsung
2019-10-23 13:17 ` Arnd Bergmann
@ 2019-10-23 14:12 ` Krzysztof Kozlowski
0 siblings, 0 replies; 18+ messages in thread
From: Krzysztof Kozlowski @ 2019-10-23 14:12 UTC (permalink / raw)
To: Arnd Bergmann
Cc: Kukjin Kim, Ulf Hansson, Thierry Reding, Mark Brown,
Greg Kroah-Hartman, Jiri Slaby, Sangbeom Kim, Sylwester Nawrocki,
Liam Girdwood,
moderated list:ARM/SAMSUNG EXYNOS ARM ARCHITECTURES, Linux ARM,
Linus Walleij, Uwe Kleine-König, Jaroslav Kysela,
Takashi Iwai, Olof Johansson, Sascha Hauer,
Clément Péron, Mauro Carvalho Chehab,
Bartlomiej Zolnierkiewicz, Faiz Abbas, linux-kernel, linux-mmc,
Linux PWM List, linux-spi, linux-serial,
ALSA Development Mailing List
On Wed, Oct 23, 2019 at 03:17:35PM +0200, Arnd Bergmann wrote:
> On Wed, Oct 23, 2019 at 2:15 PM Krzysztof Kozlowski <krzk@kernel.org> wrote:
> > On Thu, Oct 10, 2019 at 10:29:55PM +0200, Arnd Bergmann wrote:
> > > These can be build completely independently, so split
> > > the two Kconfig symbols.
> > > config DEBUG_S3C_UART0
> > > - depends on PLAT_SAMSUNG || ARCH_EXYNOS
> > > + depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS
> >
> > How are you going to select DEBUG_S5PV210_UART now?
>
> I don't see a problem here, the patch should not change the behavior at all.
>
> The whole entry now looks like:
>
> config DEBUG_S3C_UART0
> depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS
> select DEBUG_EXYNOS_UART if ARCH_EXYNOS
> select DEBUG_S3C24XX_UART if ARCH_S3C24XX
> select DEBUG_S3C64XX_UART if ARCH_S3C64XX
> select DEBUG_S5PV210_UART if ARCH_S5PV210
> bool "Use Samsung S3C UART 0 for low-level debug"
>
> so this will work as before with any of ARCH_EXYNOS, ARCH_S3C24XX,
> ARCH_S3C64XX and ARCH_S5PV210.
>
> What am I missing?
Ah, everything is OK, I mixed up removed with added line so it looked
reversed (removal of ARCH_S5PV210).
Looks good.
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 18+ messages in thread
end of thread, other threads:[~2019-10-23 14:12 UTC | newest]
Thread overview: 18+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-10-10 20:28 [PATCH 00/36] ARM: samsung platform cleanup Arnd Bergmann
2019-10-10 20:28 ` Arnd Bergmann
[not found] ` <20191010203043.1241612-1-arnd@arndb.de>
2019-10-10 20:29 ` [PATCH 11/36] ARM: s5pv210: split from plat-samsung Arnd Bergmann
2019-10-10 20:29 ` Arnd Bergmann
2019-10-11 5:51 ` Uwe Kleine-König
2019-10-11 5:51 ` Uwe Kleine-König
2019-10-22 14:01 ` Arnd Bergmann
2019-10-22 15:53 ` Uwe Kleine-König
2019-10-22 16:20 ` Arnd Bergmann
2019-10-15 14:13 ` Ulf Hansson
2019-10-15 14:13 ` Ulf Hansson
2019-10-15 14:23 ` Thierry Reding
2019-10-15 14:23 ` Thierry Reding
2019-10-23 12:14 ` Krzysztof Kozlowski
2019-10-23 13:17 ` Arnd Bergmann
2019-10-23 14:12 ` Krzysztof Kozlowski
2019-10-23 13:10 ` [PATCH 00/36] ARM: samsung platform cleanup Krzysztof Kozlowski
2019-10-23 13:39 ` Arnd Bergmann
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).